|
|
The livellostato one to magnetic drive MEC To
it is indicated for the control of the level of the liquids in the majority of the industrial applications.
Installed to the previewed point of threshold it carries out function ON/OFF for the putting in march of pumps, the activation of elettrovalvole, the remote signalling of the attainment of the level, concurring the complete putting in automatic rifle of the management of tanks, also in pressure.
It is settled directly on the flank of the tank
or externally, inserted in a connected room of control.
They can be used or more instruments in relation to the number of necessary points of participation.
|
|
Description
Standard liquid level sensor. The sensor has to be mounted vertically for best results. Two versions are available:
PP (Polypropylene) for water applications and dilute acids.
PA (Polyamide) for use in oil, gasoline (petrol) and brake fluid.
The standard termination is a PVC cable with a cross section of 0.14 mm2 and a length of 500 mm. The cable can be modified on request.
|
|
HVAC Series Condensate Level Switches
Plastic Float Level switch consists of a magnetic float, unit stem with magnetic reed switch, the magnetic float moves with liquid level to actuate a hermetically sealed magnetic switch within the unit stem. The level switches usually used for high or low alarm vessels. Multi-point level switches, the design is according to customers' specifications.
Advantage
Good look and smart design
Products are CQC, CE , UL approved and ISO9001-2000 is certified
High temperatures up to 105 degrre C
Switches are tested 100 precent before shipping
Switch mode N.C. or N.O. is selectable
Variety float ball dimension is selectable for broad media compatibility
By inverting the float 180 the switch contact state can be changed from Normal close to Normal Open
|
|
|
Where fluids must be stored or handled the Barksdale level switches with their large variety from a simple com-pact switch to multi level stations with lengths up to three meters are a logic choice (longer on request).
|
|
Closed : float at the top - Open : float at the bottom
Closed : float at the bottom - Open : float at the top
PRODUCT REFERENCE
PTF01070
PTFA2015
PTFA3015
|
|
Minimal dimensions
Length up to 1'200 mm
Removable without disassembling of reservoir cover
Various types available with 1 or 2 level
contacts and additional temperature switch
Temperature contact up to 90° C
|
|
Elettrotec float level switches are designed to meet a complete range of application requirements. Available in brass and NBR float, stainless steel or PVC to detect the level of dissimilar liquids such as water, oil, solvents and acids.
According to the different models Elettrotec switches have to be mounted vertical from tank top.
Various mounting configurations are available and a variety of wire terminations, custom lead lengths, cable jackets and connectors can be supplied on request.
Elettrotec switches are shipped Normally Closed (N/C) as a standard but switches in N/O and SPDT mode can also be ordered.
In addition to single point detectors, Elettrotec also offers multipoint products, customer kit-assembly, switches in explosion-proof execution (EExd IIC T6) and specifically approved for marine applications (RINA, LLlyd's Register, Germanischer Lloyd)
|
|
Float switches for monitoring the level of liquid media
SR 10
Characteristics:
simple to install
practical and inexpensive solution
maintenance-free
control elements: reed contacts
Electrical connection: Connecting box , coupler plug or cable
IP66 protection
Temperature range: -30°C to 150°C
standardized and customer-specific designs
Areas of application
IMB float switches are based on the float principle with small reed contacts for every level to be monitored. They are suitable for virtually all liquids and are mainly used for level controlling and monitoring:
plant engineering, machine construction, chemical industrie, biochemical industrie, petrochemical industrie, liquid natural gas, off-shore, power plants, ship-building, food industrie, pharmaceutics etc.
|
|
- Standard items float technology
- Materials, Brass, ST. Steel, PVC, PPL, PVDF
- 1/8"-3/8" process connection
- Max pressure up to 50 bar (see data sheet)
- Max temperature 130°C (see data sheet)
- Constructions for 180°C on request
- Reed switch SPST or SPDT
- Cable wiring
- Protection class IP65
|
|
|
These switches are used to monitor liquid levels by opening or closing when a desired action point is reached. A variety of types are available using mercury and non-mercury tilt switches and, also, permanent magnets and reed switches. Common applications include sumps, pump-control systems, bilge pumps, below ground vaults and irrigation systems
|
|
|
|
|
|
Bernstein designs and manufactures a modular system of float switches which can be combined and configured to create a switch that ideally meets customer specifications.
Float switches provide a reliable and cost-effective acquisition of level information in containers with stagnant or flowing liquids, such as water, oils, alkaline solutions and similar substances.
A float switch comprises a connector element, a switching tube with 1 to 4 reed contacts and the float. The float is equipped with an integrated ring magnet and rises and falls with the level of the fluid. The magnetised contact reeds trigger a signal as soon as the float reaches the sensing range of the reed contact.
The range of Bernstein float switches ranges from miniature versions to heavy-duty and pressure-resistant versions.
The particular advantage of these float switches is, that the switching contact can directly – when furnished with the proper protection – switch loads, e. g. relays, signal lamps or even small pumps.
|
|
LL SERIES REFRIGERANT FLOAT SWITCHES
This float controlled, magnetically actuated, mechanically operated, HERMETICALLY SEALED switch assembly can maintain close control of liquid level. The rugged construction makes it relatively insensitive to disturbances of the refrigeration system or vibration of the attached pipelines. The electrical switch, which is fused, and the operating mechanism are encapsulated within a transparent housing, which HERMETICALLY SEALS the moving parts and switch from ambient conditions and yet allows observation of the switching motion for determination of the liquid level. Type LLC, LLSC, LLAC are U.L. Listed for outdoor service. Types LLX, LLXS, or LLAX are not fused.
|
|
level sensors
- potential-free
- robust and wearless
- high repeat accuracy
- selectable tube length up to 2m
- free selectable number and position of switch-points
- acid-proof versions available
- plug or cable connection
|
|
Function possibilities
- Level switch functions
- Temperature switch functions
- PT-100 / PT-500 / PT-1000 combination
- Interface measurement
- Up to 250°C working temperature
- Up to 175 bar working pressure
- Sanitary applications
- With test switch function
- Flexible tubes available
|
|
For liquids
Contact max. 4 reed switches
Connection G 1/8...G 2 male, flange: DN50..DN125
Material brass, st. st., PVC-U, PP, PTFE
Max. pressure 100 bar
Max.temperature 150°C
Liquid density from 0,5 g/ml on
|
|
Liquid Level Switches
For over 30 years Orange Research has enjoyed the respect of industry as a supplier of high quality process control instruments. It started with our differential pressure gauges and switches, and soon moved to flow meters and flow switches. We now are pleased to offer this new line of low cost liquid level float switches.
Whether your needs are vertical or horizontal liquid level switches we have the solution. Choose from a wide variety of materials, from stainless steel to polypropylene. We offer many size and shape liquid level switches that meet the most common level measurements. We also offer special materials and designs to meet more uncommon requirements.
|
|
Buy plastic float switches below $5.00!
Our FS01- is an economical choice for many general applications.
Polypropylene Float Switches offer an economical solution for general applications and are also good for many acids where chemical resistance is important.
Nylon Float Switches with Buna-N Float are ideal for petroleum oils and other fuel applications. This highly bouyant float switch is designed to be used in fluids with specific gravity of .5 or higher.
View the SMD "Application Notes" to check chemical compatability and specific gravity for your fluid.
|
|
|
|
|
|
LEVEL SWITCHES
The Level Switches Serial W is the top line for boilers automation, it has seven models, depending on maximum operational pressure and assembly charactiristics.
BW - 249: up to 17 atm
BW - 126: up to 12 atm
BW - 251: up to 18 atm
W - 126: up to 12 atm
W - 251: up to 18 atm
W - 291: up to 22 atm
W - 601: up to 42 atm
29 CC: up to 12 atm
31 CC: up to 12 atm
CHARACTERISTICS
The W Serial combines the floating operational principle, with the safety of the magnetic assembly.
Made in welded steel or steel melting(W-291, W-601) with A-53 Gr.B material,welded container with procedure and operartor certified by RFO (ASME IX)
With binded containers for a quick and easy access to floating, it is possible to chack, clean and maintain.
It´s use allows the automation of baoilers and tanks, since they are equipped with up to three ewitch mechanisms (depending on the model).
Adding a dissipating extension it allows to operate with a temperature up to 303°C (depending on the model).
All wet parts of the switch are made with stainless steel AISI 316.
USE
- Steam Boilers
- Water Boilers
- Digesters
- Tanks of Condensed
- Feed Tanks
|
|
Livellostato magnetic model MEC S
it is indicated in the applications with presence of morchie, covering products, foam, since the fulcrum point does not turn out interested from the process liquid.
Installed to the previewed point of threshold, it carries out high function ON/OFF or low level and the remote signalling of the attainment of the level, concurring the complete putting in automatic rifle of the management of tanks or systems of control, also in pressure.
It is settled directly on the flank of the tank.
It can be supplied with device for the control in field of the operation (you see Mec T).
|
|
Magnetrol’s displacement type level switches offer the industrial user a wide choice of alarm and control configurations. Every unit utilizes a simple buoyancy principle and is well suited for simple or complex applications such as foaming or surging liquids or agitated fluids.Displacer level switches usually cost less than other types of level switches.
Features include narrow or wide level ranges achieved through multiple switch mechanism capability, displacers that adjust along any point on the suspension cable, anti-surge design to eliminate the possibility of switch shortcycling, flanged or threaded mounting, field adjustable set point and switch differential, NACE models and floating roof top models.
|
|
|
|
|
|
LEVEL SWITCHES
The Level Switches Serial A, has six especific models according to service conditions:
A - 153: Fixed Differencial of variable height (one signal)
A - 153 - TDM: Fixed Differencial of variable height (two signals)
A - 153 - TDM - 3X: Fixed Differencial of variable height (three signals)
A - 103: Variable Differencial of variable height (one signal)
A - 103 - TDM: Variable Differencial of variable height (two signals)
A - 103 - TDM - 3X: Variable Differencial of variable height (three signals)
CHARACTERISTICS
The A Serial combines the displace operational system, with the safety of the magnetic assembly. Thischaracteristic makes possible to detect large liquid movement differentials, impossible with a floating one. It allows to operate with working conditions where it is required to detect fluids with a very low density of 0,45 kg/dm3 and high pressure.
It allows to detect liquid %u2013 liquid interface.
Pressure up to 250 atm.
Adding a dissipating extension it allows to operate with a temperature up to 280°C.
It is possible to have from one to three signals, it can be duplicate or triplicate whereever it is requiered.
USE
- Tanks of Reception for Natural Gas
- Tanks of Storage Hydrocarbon
- Tanks of Condensed
|
|
| ... products without technical information |
| |
|
|