|
|
clamp on meter is a combination power analyzer, power quality logger, and clamp meter, and is ideal for monitoring electronic loads.
With the bright color power meter display to analyze the harmonic spectrum, a low-pass filter to remove high frequency noise, and a high EMC immunity design, the Fluke 345 power analyzer is ideal for troubleshooting power quality on switching loads. Additionally, the Hall Effect clamp meter design makes measurement of dc current possible without the need to break the circuit with the power meter. The internal memory of the power analyzer enables long-term power quality logging for analysis of trends or intermittent problems.
Applications
Setup and troubleshoot variable frequency drives and UPS systems - Verify correct operation by measuring key power quality parameters
Harmonics measurements - Uncover harmonic issues that can damage or disrupt critical equipment
Inrush capture - Check start-up current where spurious resets or nuisance circuit breaker tripping occurs
Load studies - Verify electrical system capacity before adding loads
|
|
296: 4,000 count manual ranging digital clamp-on meter with analog bar graph, True RMS, frequency, % harmonic distortion, data hold, Min/Max/Peak, and sleep mode/auto off.
293: 4,000 count manual ranging digital clamp-on meter with analog bar graph, True RMS, frequency, trim mode, data hold, peak hold, and sleep mode/auto off.
291: 4,000 count manual ranging digital clamp-on meter with data hold, and peak hold
275: 11,000 count autoranging digital clamp-on meter with True RMS, frequency, capacitance, temperature, non-contact voltage detection, data hold, relative mode, Min/Max/Peak, peak hold, sleep mode/auto off, 0.5% Basic DC accuracy
270: 4,000 count autoranging digital clamp-on meter with analog bar graph, frequency, capacitance, temperature, non-contact voltage detection, data hold, relative mode, Min/ Max/Peak, peak hold, sleep mode/auto off
265: 4,000 count autoranging digital clamp-on meter with frequency, capacitance, data hold, and sleep mode/auto off
250: 4,000 count manual ranging digital clamp-on meter with data hold, and peak hold |
|
Description:
True RMS for accurate measurement when harmonics are present.
- Extra-high-capacity 2000A measurement.
- Measures True Power, Apparent Power, Reactive Power, Power Factor, voltage, current, and frequency.
- Calculates total power and power factor on 3-phase, 3-wire, and 3-phase, 4-wire, and 1-phase, 3-wire circuits using stored measurement.
- Stores up to 4 sets of measurements for calculation on multi-phase and multi-wire circuits.
- Large, easy-to-read, dual 4-digit, 4000-count LCD display for high resolution.
- Instantly recall the calculated Power Factor.
- Accessories included: (1) 9V battery, test leads, carrying case. |
|
| Amp-Clamp current probes, used with analog VOMS provide accurate measurements of high AC current found in power systems and related control circuitry. The Amp-Clamp jaws are closed over a conductor in the circuit and the current load is indicated on the connected meter. The 150-2 has six ranges (up to 300 ACA) and is available with banana and reverse banana plugs. |
|
| ... products without technical information |
| |
# B+K Precision offers a wide variety of current clamps for safe non-invasive current measurement. Measure up to 2000A with these reliable, rugged instruments. All of B K Precision clamps are much more than a current clamp offering the ability to measure, voltage resistance, capacitance and even frequency. Additionally, special features allow for the recording of minimum and maximum values, peak values, test diodes and for continuity. Any one of these products can be a total measurement solution. Measures up to 1000A
# Measures up to 1000VDC & 750Vac
# Jaw openings 2.24"
# Low battery indication |
|
The Model 325 AC/DC True RMS Power Clamp Meter provides safe, non-invasive measurements of up to 400KW, 400 Amps AC, and measures up to 600 Volts AC/DC utilizing the pair of standard test leads. The lightweight, portable, battery powered clamp meter measures the most common ACV, DCV, ACA & DCA needed to troubleshoot residential and small commercial electrical systems. Back light 3 ¾ digit LCD display
# Auto range
# Auto power off
# Data Hold
# High speed bargraph
# Test ranges: ACV, ACA, DCV, DCA, Ohms, WATT, Frequency & Continuity
# Jaw opening 1.37%u201D (35mm) |
|
The model 316 is the perfect Clamp Meter for many electronic applications. Because this meter was designed to measure smaller amounts of current it is ideal for quick non-intrusive current measurements. Auto power off
# 4 Digit LCD display
# Low battery indicator
# 0.49” Clamp opening
# Overload protection
# AC/DC Amp ranges 10A, 80A & 100A
# 1mA (10A range) & 10mA resolution
# Measures current between 5% to 100% full scale
# Measures AC/DC Volts to 600V
# Measures resistance to 10K ohms
# One year warranty |
|
200A AC Mini Clamp Meter/Voltage Detector
Convenient compact size clamp meter with built-in AC Voltage detector
3-1/2 digit (2000 count) backlit LCD display
Measures AC Current up to 200A with 100mA resolution
2% basic ACA accuracy
0.9" (23mm) jaw opening
Built-in non-contact AC Voltage detector (120/240VAC, 50/60Hz) via clamp tip plus flashlight
|
|
3999 Count Clamp Meter ( DCM-033)
DCM-033 Features:
DC Voltage 400mV~ 600V (0.8%+1)
AC Voltage 4V ~ 600V (1%+5)
DC Current 40A/400A (2%+3)
AC Current 40A/400A (2.5%+5)
Resistance 400 ~40M Ohm (1%+2)
Frequency
Duty Cycle
Special Functions
Auto Ranging
Diode
Continuity Buzzer
Data Hold
Full Icon Display
Sleep Mode
Low Battery Display
Input Impedance for
DC Voltage Measurement
Around 10MW
Max. Display 3999 |
|
Need the perfect tool to troubleshoot a system?
The ACD-16's provide a full range of measurements, enhanced with data logging capabilities, to catch what the eye can't see. Double the efficiency, with an optional PC interface kit.
- TRMS & Backlight Screen (ACD-16 TRMS Pro only)
- Measurements: AC/DC Voltage up to 600V, AC Current up to 1000A, Resistance, Frequency and Temperature
- Data-logging 5400 points
- Optional PC interface capability (RS-232 KIT2)
- Audible continuity
- Auto power off
- Automatic polarity
- Low battery indication
- Data hold
- Large, easy to read LCD display
- Accommodates conductors up to 1.77" (45mm) in diameter
- Carrying case, thermocouple, test leads, batteries (installed) and user manual included
- Voltage overload protection for all functions up to 600V AC/DC
- Safety CAT III 600V |
|
The CM50 range of clamp meters from Martindale combines outstanding specifications, measuring capabilites and careful design to provide the most cost effective clamps available.
CM52 200A Mini clamp meter
CM54 1000A Clamp meter
CM56 Autoranging clamp meter
CM58 1000A True RMS clamp meter
CM67 Earth Leakage clamp meter |
|
| Meterman's line of clamp-on meters continues to be a popular choice of electrical and HVAC professionals. These meters are designed for electrical contractors, electricians, HVACR installers and servicers, as well as commercial building and industrial plant maintenance personnel and electrical shops. People who demand value, good quality and practical test equipment for their everyday use. Five models and measurement capabilities to choose from. |
|
| ... products without technical information |
| |
|
|
see the results for the following category