|
|
MR 44 non-contact measuring principle:
Length measuring device based on non-contact principle for production monitoring in fully automatic, unsupervised production. The probe temperature is kept constant.
MR 33 measuring principle scanning function:
Tactile length measuring device for production monitoring in fully automatic, unsupervised production. Direct contact probe with high quality potentiometer (12 mm stroke). |
|
Heavy duty measuring unit, dual measuring wheels for better stability and contact, frame/bulkhead mounted.
This rugged instrument has a wide range of applications where an accurate record of length is required. It is a strong, heavy duty unit for use on calenders, tenters, rolling, ribbon winding textile machinery and almost all other continuous manufacturing processes. The unit can incorporate any of the heavy duty mechanical revolution counters described in the totalising and predetermining sections of this site.
• Available with shaft encoder for driving electronic counters or computers.
• Sturdy die-cast construction.
• Uses standard measuring wheels.
• Can tilted out of the way when not in use.
• Supplied with stand as an option.
The 2300 bolts directly onto a bulkhead or frame member. The intregal hinge arrangement allows the unit to be positioned at any angle.
The measuring wheels supplied can be 0.5m or 0.3m (18in or 12in) circumference (specify when
ordering). The weight of the assembly holds it in contact with the material being measured. |
|
VisionGauge® high-resolution cable cross-section inspection and measurement systems are designed to carry out high-accuracy automatic measurements of multi-strand cables. Measurements include:
-Insulator thickness over every outer strand
-Minimum insulator thickness
-Cable outer diameter
-Inner diameter (i.e. best fit through the point of minimum insulator thickness on each outer strand)
-ID / OD concentricity
-Insulator area
All of these results are obtained by pressing a single button, in just a few seconds. Furthermore, the measurements are completely operator independent.
These cable measurement systems can accommodate cables with any number of strands.
The VisionGauge® software that runs these systems has a very simple and intuitive interface. You can use it to quickly and easily compute statistics, plot graphs and charts and send measurement data to other software and database applications across your network.
These cable and wire measurement systems are very rugged and well designed. They can be used on either the production floor or in the quality-control area and they require virtually no maintenance.
Standard configurations can accommodate cables and wires up 1.7" in diameter and produce measurements with a resolution of 0.0001" (i.e. 2.5 um). Non-standard configurations are also available. |
|
Versatile system for geometrical measurements. Thoroughly proven reliability and user-friendly design make it easy for you to measure almost anything. Simply add laser transmitters and other accessories to suit your purposes.
Typical applications: Straightness, flatness, squareness, parallelism and spindle direction in machine tools, mechanical constructions, etc. |
|
PRECISION MEASUREMENT & CONTROL SYSTEMS - WIRE & CABLE INDUSTRY
Beta LaserMike offers the most comprehensive process control instrumentation for the wire and cable industry. As a leader in the marketplace, we understand our customers%u2019 quality, cost, and measurement and process control objectives and work with them to create innovative, reliable solutions that improve product quality while lowering costs.
* Diameter Gauging and Control- In line
* Diameter Gauging - Benchtop
* Wire Draw Gauging
* Ultrasonic Wall Thickness & Eccentricity
* High Frequency Search Coil Eccentricity
* Laser/Inductive Wall Thickness
* Capacitance Monitoring and Control Systems
* Lump & Neckdown Detection
* Length Measurement
* Temperature Measurement
* Weight & Throughput Measurement |
|
EasyDrop Standard for PC operation and EasyDrop USB for working with a notebook: with these two instruments in the new KRÜSS product range measuring contact angles and surface free energy is as quick and simple as rarely before. The duo offers everything required for both routine lab work and on-site measurements. Quality managers gain quick access to reliable results. Scientists use the sophisticated analytical tools for research at a high level. The chiefly manual components ensure that EasyDrop remains favorably priced despite its high performance level.
- Contact angles easy and fast
- Fast and precise dosing and sample positioning
- Budget-friendly thanks to manual operation
- Several drop shape analysis methods for big and small angles
- Surface energy by all established methods
- Surface tension with the pendant drop method
- Comfortable evaluation and data management
|
|
The concept of the DSA100 encompasses everything from fully manual to fully automated contact angle measurement. Due to its modular concept, virtually any level of automation can be achieved - even with post-sales additions.
Flexible sample size, flexible measuring technique - with its double modularity concept KRÜSS GmbH has revolutionized contact angle measuring technology. No matter what measuring problem you have to face - the DSA100 will grow to meet your requirements. A total of more than 30000 different combinations is available from the DSA100 building block system; any necessary or required degree of automation can be realized in next to no time. |
|
In some critical bolting applications, factors such as friction or bolt/joint geometry are such that the measurement of applied torque alone will not provide the degree of accuracy necessary to control the preload within the required limits. Likewise, many critical applications also demand that bolt preload be monitored over the service life of the fastener as part of a predictive or preventative maintenance program. In these applications, ultrasonic measurement of fastener elongation and/or load has frequently proven to be the most accurate, reliable and cost effective solution.
Ultrasonic measurement of bolt preload is made possible by introducing a sonic pulse at one end of the fastener and accurately measuring the time of flight (TOF) required for the echo to return from the opposite end; using material constants, the USM-II converts this TOF into an "ultrasonic length" of the fastener, providing a baseline from which future measurements will be made. When the fastener is tightened, the TOF increases and the USM-II will again utilize material constants to eliminate the effects of stress and temperature variations on sound velocity, providing an accurate elongation or load measurement.
The USM-II uses state of the art hardware and software to achieve these measurements with maximum automation, and minimizes the need for operator interpretation. Offering digital recordation and transmission of data, as well as calibrated analog signal output the USM-II provides a complete system for measurement, recordation, and control of fastener tension in the most demanding applications. |
|
| Vishay proposes several technical solutions to measure uninterrupted the traction of band exerted on a plastic film, paper, on sheet, fabrics, and generally, all that ravels uninterrupted on rollers, this starting from 20 daN up to 100 tons |
|
BS33 can quickly measure length of any reeled wire up to 30,000m (100,000ft) and with the gauges from 0.15mm² to 240mm². Within seconds, cables up to 30,000m can be measured and digitally displayed without the cumbersome unrolling of cable reels. The BS33 also can be used as a precision milliohm meter.
In User Select mode, BS33 allows users to save the resistance of a used wire for additional measurements of unknown lengths of any wires with the same gauge. In normal mode, BS33 enables to accurately measure the length of standard gauge wire. With gauges selection from 0.15mm² to 240mm²; users can measure the length of any metal wire as well as Copper or Aluminum wires, the resistance of which can be measured precisely.
BS33 is very useful for electrical contractors, utilities and distributors to control inventories of wire.
Features:
- 4 digit display with enunciators
- Measures in FEET (ft) or METERS (m)
- Direct readout for both COPPER (Cu) or ALUMINUM (Al) wire
- User Select Mode with 8 memory locations
- Resistance range for milliohm measurements
- Automatic temperature compensation for changes in ambient temperature
- User calibration mode, Calibration standard included
- Sleep mode
- Easy-to-use
- Low battery indicator
- High precision Kelvin Clip test lead set included |
|
LASERSPEED 9000 - Non-contact Length & Speed Measurement System
With the ability to measure length and speed non-contact with accuracy better than ±0.05%, LaserSpeed is the ideal gauge for replacing contact tachometers that are prone to a variety of measurement errors and high maintenance costs. LaserSpeed uses the non-contact laser doppler velocimetry (LDV) technique with all signal processing and intelligence built directly into the gauge, allowing it to integrate with a variety of other systems from simple length counters to advanced control systems.
A Bragg cell is built in the optical system to allow for measurement of speeds from 0m/min, et to detect the direction of travel of the product without the need for external information.
LaserSpeed is able to measure length & speed on dis-/continuous and in-line processes, on most kind of material and surface types.
Specifications:
* measures from 0 to 4000m/min
* accurate by +/-0,05%
* stand-off distance 300mm, depth-of-field 35mm
* working temperature 5-40°C for the specified accuracy
* sealing against IP67
* Outputs: analog, RS232, 2x pulses as standard, Ethernet
Benefits:
1- Measures from 0m/min, ideal for applications where the speed profile is variable with frequent stops or reverse speeds,
2- high accuracy ( +/-0,05%) and high repeatability ( /-0,02%)
3- no moving parts: no wear or drift to the accuracy
4- independent to product size and no markings |
|
LASERSPEED 4000 - Non-contact Length & Speed Measurement System
With the ability to measure length and speed non-contact with accuracy better than ±0.05%, LaserSpeed is the ideal gauge for replacing contact tachometers that are prone to a variety of measurement errors and high maintenance costs. LaserSpeed uses the non-contact laser doppler velocimetry (LDV) technique with all signal processing and intelligence built directly into the gauge, allowing it to integrate with a variety of other systems from simple length counters to advanced control systems.
LaserSpeed is able to measure length & speed on continuous and in-line processes, on most kind of material and surface types.
Specifications:
* measures from 0.4 to 4000m/min
* accurate by +/-0,05%
* stand-off distance 300mm, depth-of-field 35mm
* working temperature 5-40°C for the specified accuracy
* sealing against IP67
* Outputs:analog, RS232, 2x pulses as standard
Benefits:
1- non-contact Laser Doppler technology ensures high accuracy ( +/-0,05%) and high repeatability ( /-0,02%)
2- no moving parts: no wear or drift to the accuracy
3- independent to product size and no markings |
|
The ML10 Gold Standard laser represents the ultimate in calibration for machine tools, co-ordinate measuring machines (CMMs) and other position and motion critical systems. In combination with the extremely accurate EC10 environmental compensation unit, the system boasts ±0.7 ppm linear measurement accuracy.
The ML10 Gold Standard system can improve performance through targeted maintenance and can correct linear positioning errors using error compensation.
|
|
KOFLOC MFC-Gas Mixer (8500)
The KOFLOC MFC-Gas Mixer (8500) integrates 3 KOFLOC Gas Mass Flow Controller MODEL 8500 SERIES and a gas mixer in one convenient package. The result is a compact device that not only saves space and avoids clattering, but a unit with superior performance than a conventional system of separate mass flow controllers, a gas mixer and piping. The KOFLOC MFC-Gas Mixer (8500) is especially suited for burn control applications by greatly reducing flame flickering and stabilizing burn better than conventional setup.
FEATURES
- High-lift actuator for large flows
- Single 24 VDC power source
- Choice of RS232C or RS485 interface
- Standard totalizer function
- 14-bit converter for 4-1/2-digit display and operation
- Isolated thermal sensor for measuring inflammable gases
- Choice of SUS316L or SUS316 stainless steel
- Standard dimensions and fittings for easy replacement
- Free mounting position
- SV setting, plus 5 pattern settings
- Auto-zero function
- Wide selection of fittings, seals, wetted materials and communication interfaces
- Easy maintenance
APPLICATIONS
♦ Gas mixing
♦ Burn control |
|
The MCV-2002 “Two interferometers operating at the same time” utilizes a dual beam laser head module to accomplish simultaneous linear and angular (pitch or yaw, straightness, flatness) calibration of axes on machine tools, CMMs, or X-Y tables as well as surface plates. The software enables the operator to automatically collect linear and angular positions simultaneously or angular data on the fly in accordance with various industry standards. Material temperature, air temperature and air pressure variations are automatically compensated. linear measurement range of 33-feet (10-m) with 1 microinch (10nm) resolution, and an angular measurement range of 16-feet (5-m) with 0.2-arcsec angular resolution. Optional ranges up to 200-feet (60-m) linear and 100-feet (30-m) angular are also available upon request..
|
|
Compact Orifice Oriflow
Applications
The Oriflow compact orifice is used for flow measurements of conductive and non-conductive fluids, gases and vapours in all industrial branches. Applications include flow measurements (volume/mass) for balancing (compressed air systems, heat carries, vapours, chemical products, for example), process control and high throughput applications.
Reliability
already over 2,000 units in operation
extremely rugged and stable measuring instrument
suited for extreme applications
Special features
dry calibration is possible
highly reproducible results
easy to install without differential pressure lines
Flexibility
DN 15 to DN1000
0,4 bis 20000 m 3 /h
-40 °C to +400 °C (depending on model)
to PN 40 (higher upon request)
current output with HART®
electronical local display |
|
The major features are: the measurement is non-contact; the circular
path radius can be varied continuously from less than 1 mm to 150 mm;
all linear accuracy are traceable to NIST; the feed rate is up to 4 m/sec;
the data rate is up to 1000 Hz; and the actual feed rate, velocity, and
acceleration profiles can also be determined. This information are
important to determine the motion dynamics of the machine and the
servo performance. |
|
Microprocessor meltingpoint measuring instrument with interface RS-232.
Measuring Range: 25-400 °C
Accuracy: up to 200°C +/- 0.3°C; 200°C-400°C +/- 0.5°C
Display: LCD Grafik Display
Heating Rates: to 300°C approx. 4min; to 400°C approx.7.5 min
Dimensions: 230x210x110 |
|
Multifunction meters from AHLBORN are suitable for the adaption of various sensors and are able to measure and store the data of nearly all physivcal, chemical and electrical variables. Also sensors with a non linear output signal are adaptable. Sensor specific linearisations can be programmed easily by the user. The linearisation will be stored inside the intelligent sensor connector. Between 5 to 9 sensors are adaptable depending on instrument version. The devices are easy programmable via menue guided displays. The indication of up to 3 measuring values is possible on the large, illuminated display. The indication can be also a grafic or a measurement list. The measurement values can be stored in the device or directly be transfered to a PC, either per cable or wireless. Complete software programms are available for professional data acquisition. The company AHLBORN offers with its flexible dataloggers and multifunction devices many possibilities for each kind of application and measurement task. The ALMEMO measurement techology is future orientated and easy to handle.
|
|
m3/h, m/s, CO2, %RH, °C, DP, Lux
•Instrument memory for up to 10,000 measurement values
•PC software for analyzing, archiving and documenting the measurement data
•IAQ probe, Lux probe and Comfort Probe
•Vane measurement and integrated differential pressure probe for Pitot tube measurement
•Wireless probes for temperature and humidity |
|
°C, %RH, °Ctd, g/kg, hPa, m/s, m3/h, ppm CO, ppm CO2, U/min, mA, V
•Simultaneous measurement at several measurement locations
•Data logger function
•Freely usable probe inputs
•1 to over 200 measurement channels
•Data transfer with the Testo data bus
•Modular setup of system components |
|
DTM 550 FEATURES
Temp:-20Ž~ 100Ž
Humidity:0 ~ 100%RH
3 1/2 Digit, Back light display
Use highly accurate RTD temperature sensor
MAX, DATA, HOLD function
Automatic low battery indication
Valox housing to withstand accidental
DTM 550SPECIFICATIONS
Measurement Range: Temp:-20Ž ~ 100Ž
Humidity: 0 ~ 100%RH
Temp. Accuracy: }0.5Ž-0Ž~50Ž, }1Ž-20Ž to 0Ž,50Ž to 100Ž
Humidity Accuracy: }2.5% RH (10% to 90% RH) ;}5% RH (90% RH)
Operating Environment: 0Ž to 50Ž at <75% relative humidity
Resolution: Temperature:0.1Ž; Humidity:0.1% RH;
Sensor: Pt385/1000Ħ,RTD temperature sensor
General
Power Requirement: 4 pieces 1.5V (AAA size) batteries
Dimensions: 6.7"x1.7"x1.6" (170x44x40mm)
Weight: 6.3 oz(180g)
Accessories: Soft carrying case, batteries, owners manual |
|
Combining the two tools frequently used by every instrumentation technician,the ecom 789 Process Meter will be at home in every instrumentation technician ’s toolbox.The ecom Process Meter combine a DMM and a Loop Calibrator in one rugged,handheld tool. With its built-in 24 V loop supply it reduces the need for taking a separate power supply when doing off-line transmitter testing.
|
|
| ... products without technical information |
| |
|
|
