|
|
With the magnetic distance- and angle measuring systems of SIKO, compact single systems can be assembled. Thereby a resolution of up to 0,005 mm and a measuring accuracy of up to 0,05 mm is realisable.
Advantages of the magnetic measuring principle are, insensitive against dirt and a flexible magnetic tape. Also with adverse environmental influences, a successful operation and an individual application is guraranted.
|
|
With the magnetic distance- and angle measuring systems of SIKO, compact single systems can be assembled.
Besides distance and angle also rotation can be recorded. Special sensors register the incremental segmentation of magnetic rings with a resoultion of up to 20.000 pulses per revolution. Advantages of the magnetic measuring principle are, insensitive against dirt and a flexible magnetic tape. Also with adverse environmental influences, a successful operation and an individual application is guaranted.
|
|
OPTIPACT Optical length and velocity sensor
- Contact-free optical measurement principle
- Measurement in 2 orthogonal axes
- Compact industrial design (120mm x 47,5mm x 42mm)
- Velocity range up to 4 m/s
- Detection of standstill and direction of motion
- Allows deviation from nominal working distance
- Suited for rough and smooth surfaces
- Measurement uncertainty <1 %
- Self adapting to measurement object
- Long life LED illumination
- Programmable via Graphical User Interface
- Protection class IP 65
- Price for one piece: < 1000€
|
|
Merit ME110
Battery powered digital readout with the following fixing ways :
1) panel mountable by relevant brackets
2) surface mountable by metallic supports
Flexible cable max lenght 2 meters.
Magnetic reader head with small dimension.
Fixing by M3 or M4 screws.
Wide aligning tolerances.
To be used with magnetic tape Givi MP200.
Resolution (programmable): 1 - 0,1 - 0,05 - 0,01 mm
0,01 - 0,001 - 1/16 - 1/32 - 1/64 inch
1° - 0,1° - 0,01° - 0,001° angolare
Accuracy: ± 30 µm
Repeatibility: ± 1/2 digit |
|
Linear Position Sensing:
Comprehensive systems expertise: technological variety for the right sensor type for your drive control, machine monitoring or sensing moving processes in robotics, automation, packaging technology or the process industry.
Benefits:
- Mature technology
- Continuous innovation
- Maximum customer orientation |
|
Highest quality in most compact form, that is that
SENC 50 of ACU RITE.
The small dimensions and the high accuracies of this taper roller bearingled top illumination measuring system are ideal conditions for the employment in the measuring technique.
* Compact dimensions
* Dissolutions of 0,5 µm to 5 µm
* TTL and similar signals
* Measuring lengths from 50 mm to 525 mm
* Coded reference marks %u2013
Position Trac
|
|
- Mounting gap between sensor and tape: max. 2,0 mm (0,8mm CO2)
- Sensor Housing: ABS
- Protection class: IP 65
- Operating temperature: 0° + 50°C
- Output current: max. 20 mA per channel
- Output: Push-Pull, short circuit protected
- Index: Cyclical |
|
OPTIPACT Optical length and velocity sensor
- Contact-free optical measurement principle
- Measurement in 2 orthogonal axes
- Compact industrial design (120mm x 47,5mm x 42mm)
- Velocity range up to 4 m/s
- Detection of standstill and direction of motion
- Allows deviation from nominal working distance
- Suited for rough and smooth surfaces
- Measurement uncertainty <1 %
- Self adapting to measurement object
- Long life LED illumination
- Programmable via Graphical User Interface
- Protection class IP 65
- Price for one piece: < 1000€ |
|
LIMES Measuring system:
- Magnetic sensor is scanned along a magnetic band
- Not affected by dust, shavings, humidity
- Resolution up to 0.005 mm
- Simple mounting
- Measuring length up to 90 m
Draw wire encoder:
- Convert linear motion to rotary motion and
- simply measure with an encoder
- Measurement length up to 40000 mm
- Output signal as incremental or absolute encoder or potentiometer 0 ... 10 V, 4 ... 20 mA |
|
The magnetic measurement system includes a sensor an electronic converter and a magnetic tape. The sensor head detects the position as it is moved over the magnetic tape.
Magnetic rings are also available for rotary motion as alternative to linear magnetic tape. Different shapes, dimensions and custom-made versions are available.
The magnetic rings can be completely integrated on customer machine; they are available for diameter up to 500 mm and they can be mounted with any Lika sensor.
The measuring system is non-contacting and therefore wear-free.
Application areas are woodworking machines and sheet metal machines.
Some features are:
- IP67 protection level
- Reduced dimensions
- Resolution up to 1 mm
Low application cost is one of the system’s advantages. Moreover the system is protected against contamination and works even with strong vibrations, or in humid or dirty environment. |
|
Four models/cross sections
- 0.1, 0.2, 0.5, 1, 2, 2.5, 5, or 10 µm
(4 µin to 0.0004") resolution with
internal electronics
- RS-422 differential line driver output
- Three accuracy grades |
|
| ... products without technical information |
| |
The MicroGlider® is the highly precise, multi-sensor platform
measuring system from FRT intended for especially accurate
measuring applications. A linear motor driven, non-contact
air bearing x-y stage guarantees best precision motion during
stage movement. Hence the MicroGlider® measures profile,
topography, roughness, and coating thickness with further
enhanced accuracy. The MicroGlider® is also equipped
with a CCD camera for easy sample positioning and can
automatically perform predefined measurements. |
|
Atomic Force Microscopy
Atomic Force Microscopes (AFMs) scan the surface of a sample using a very fine tip on the end of a microscale cantilever.
Atomic interactions between the tip and the surface lead to a deflection of the cantilever which is then detected by a piezoresistive element. Based on this effect, the AFM can measure the topography or roughness of a surface with very high resolution non destructively. The AFM can be used in different operating modes and thus allows for the investigation of further properties, such as electrical and magnetical forces or elasticity of a specimen. |
|
Description:
Nowadays, the properties of surface topographies are increasingly influenced by new processing methods and new materials.
The traditional profile stylus method is often not adequate to characterize the functional behavior of surfaces. Three-dimensional recording and evaluation are required. Soft and thin-walled materials also require non-contact measurement.
Moreover, ever higher levels of surface quality are being achieved, greatly increasing the requirements placed on measuring systems in terms of resolution and measuring accuracy.
The MarSurf WS 1 satisfies all these requirements:
- Vertical resolution 0.1 nm (.004 µin)
- Three-dimensional measurement and evaluation in only a few seconds
- Compact measuring station configuration for the workshop and laboratory
- MarSurf XT 20 software
- Topographical evaluation software on the fully standardized and powerful MarWin software platform |
|
Features :
- Roughness and contour in a single stroke You need only half the time and your work is faster, more reliable and more efficient.With just one measurement, you have all the results for
roughness and contour characteristics at a glance. So you have more time for other things!
- State-of-the-art measuring technology for small tolerances. The integrated optical measuring system provides pinpoint accuracy over a broad measuring range and at maximum resolution. You can process jobs with low tolerances and thus tackle new challenges head-on.
- Innovative tracing arm concept for maximum stability The tracing arms, which have been designed using bridge-building techniques, ensure maximum rigidity, low-oscillation measurements and unwavering precision. So you can build your own bridges - to new dimensions of flexibility!
- Tracing arms with magnetic connection The magnetic mount ensures excellent system protection and a long service life. |
|
Micro DATA manufacturer measuring technique
The micro DATA sheet metal samples measuring position BPM 3 developed in co-operation with a large Austrian work
and should the following criteria fulfill:
1. Fitting of 3 feed units GD 25 Mahr with Tastsytem 250
2. Simple control surface with common indicator of the three roughness of channels
3. Computation of the roughness parameters
4. ACCESS data base for the long-term archiving of the results of measurement
5. TCP/IP interface with remote ones instructions for remote control. |
|
PRECISION MEASUREMENT & CONTROL SYSTEMS - PIPES & TUBES INDUSTRY
Beta LaserMike offers a complete line of process control instrumentation for the manufacture of products such as tube and pipe extrusions. Our systems offer varying levels of capability, utilize different measurement techniques, meet the needs of both on-line and off-line applications, and can be customized to fulfill your specific requirements.
* ID/OD/Wall Measurement
* Tolerance Checking
* Process Control
* SQC Graphical Interface
* Concentricity Measurement
* Weight & Throughput Measurement
* Non-contact Length and Speed Measurement |
|
| ... products without technical information |
| |
The Merlin 300 is a 2-axis video edge measuring system designed to enable quick, accurate repeatable measurements on multiple planes in the X and Y axis, via a high resolution video image.
With a high brilliance LED surface and sub-stage illumination,
Merlin is mainly intended for measurements of parts which
have good optical clarity and contrast like metal and plastic moulded components.
Comprehensive video tools are accessed by a video dedicated microprocessor employing the latest touchscreen technology, with a unique simplified one touch tool teach facility
|
|
MEASURING: QUALITY CONTROL AND MANAGEMENT INFORMATION
You, like all our customers, demand ever higher production capacity, quality and accuracy. This is particularly important for standard size products which subsequently undergo further operations, such as welding, bending and/or punching, performed by robots or other automated systems
|
|
As the leading manufacturer of machines for processing aluminium and PVC profiles, we supply matured solutions for different applications.
You have profile - we measure it !
Further Length stop and measure systems, like Length stop and measuring system manual, Length stop measuring system with hand wheel and Length stop and measuring system with electronic controls cover our product range. |
|
API`s Swivelcheck™ was created for the measurement of swivel axes and tilt tables. Many original equipment manufacturers in machine tool manufacturing, as well as metrology service providers, metrology calibration laboratories and repair shops use this highly precise inclination sensor, which does not need to be mounted on to the center of rotation.
The main areas of application of the Swivelcheck™ Precison Sensor:
Calibration of vertical rotation axis and tilt tables
Evaluate Vertical Rotary Axis and Table Performance
Measurement of tables and axles when used with API´s 5/6D™ or XD™ systems
Safe and userfriendly
In a short period of time the Swivelcheck™ is operationally. The intuitive user surface of API´s Swivelcheck™ software requires only a minimum training course. All measurements can be automatically implemented. The sensor works perfectly with API™s 5/6D™ and XD™ Laser.
Swivelcheck™ Software:
Simple and easy set-up and configuration
Graphical Representation of Error
Summary Error Analysis for Compensatory Purposes
Zero-Anywhere-Functionality for efficient measurements |
|
RT - 100
Optional package that can be used for the calibration of Rotary Tables and the Rotary aces of blots some to 5 or 6 Aces. The operating field
it is of 360° with increments till 10 degrees.
Precision 0,2 second of degree arc (0,06 millesimi). Compensation
automatic for the assembly eccentricity.
Portable Versione.economica and to manual drive or
automatic with motorized servo control. |
|
| The Verimet U1000 System is a Modular Automatic Universal Instrument (MAUI) designed to perform gaging, nondestructive eddy current testing, and other real time measurement data acquisition operations. The U1000 replaces all the eddy current and gaging instruments previously sold by K. J. Law Engineers over the years with a single modular instrument system having all their capabilities and more. The U1000 can perform eddy current testing from ultra-high frequency flaw detection to low frequency hardness verification and case depth prediction. Its gaging capabilities process input from LVDTs and Air Circuits to perform difficult dynamic measurements, and includes advanced filtering and spindle-compensation capabilities. The U1000 was developed using the latest hardware and software standards to allow it to integrate with other devices and systems and to evolve with emerging standards. |
|
| ... products without technical information |
| |
|
|
see the results for the following category
