|
|
Seraphin's Motor Fuel Calibration Trailers dramatically increase calibration productivity when checking gasoline and high speed diesel fuel dispensers.
The Gasoline and Diesel Calibration System or commonly known as the "Hybrid" professional trailer is equipped with three stainless steel 5 gallon or 20 liter bottom drain provers and a 100 gallon or 400 liter prover. Three 115 gallon holding tanks enable you to conduct 69 gasoline test runs with the 5 gallon measures or 4 diesel test runs with the 100 gallon prover prior to returning the fuel to the manufacturer of storage tanks. The trailer is available with optional on board pump-off system and industrial hose reel.
Gasoline Calibration System "Box Trailer" is fully enclosed with three stainless steel 5 gallon or 20 liter bottom drain provers. Three 115 gallon holding tanks enable you to conduct 69 gasoline test runs with the 5 gallon measures. Lockable doors on either side of the unit enable access to the storage area above the tanks. |
|
| The Seraphin® waterdraw system is comprised of bottom drain stainless steel provers and at least one top drain measure mounted on top of a stainless steel water reservoir. The provers drain via gravity into the reservoir. A 5 HP pump takes suction from the bottom of the reservoir tank and discharges to an inlet professional fitting of the customer's dynamic pipe prover, via a portable quick-connect professional hose. The discharge side of the customer's pipe prover connects to a stainless steel manifold which is plumbed to the top neck of each individual prover. Various combinations of Seraphin® provers can be used to calibrate different size pipe provers. A supplier of solenoid operated cock at the inlet of the waterdraw manifold is connected, through relays in the control panel, to the detector switches of the pipe prover. The system will shut down when the sphere reaches the second detector switch. The volume between detector switches will be captured in the Seraphin® measures. |
|
| Steady and reliable platform Proportional controls Easy towing speed rate A unique design of the stabilizer’s system allowing its use on rough grounds |
|
Genie TZTM-34/20
Automatic Levelling System
The Exclusive Genie Automatic Levelling System is "self-levelling", it provides 11-degree leveling capability and the system allows the machine to be set-up in less than 40 seconds.
Working Envelope and Outreach
The articulating boom structure coupled with the telescopic primary boom offers industry leading outreach and working envelope.
Reliability
Industry leading reliability with simple relay-based control system which increases ease of serviceability.
Rigid chassis and outrigger design Easy to Transport
The TZ can be towed behind vehicles with a 50mm hitch.
Standard Features
12.19 m (40 ft) working height
5.59 m (18 ft 4 in) horizontal reach
500 lb lift capacity
Outrigger interlocks
Hydraulic outriggers
Automatic leveling system
Proportional speed control system
Dual pneumatic jockey wheels
Tilt alarm/sensor
AC wiring to platform
Mechanical surge brakes
Parking brake
Hour meter
Standards Compliance
ANSI A92.2
CSA-C225-M88
CE Compliant
AS 1418.10
PB-10-611-03 |
|
Nifty 140 / TM40
14.25m (46ft 9in)
Working height
6.40m (21ft)
Working outreach
1.50m Wide Platform
Larger area for operator to work
Fully Proportional Hydraulic Controls
Simple, reliable & easy to maintain
1500 Flyboom
Greater accuracy when positioning platform
Hydraulic Outriggers
For quick & easy setup
Bi-Energy Available
Optimising utilisation
|
|
Nifty170 / TM50
17.10m (56ft 1in)
Working height
8.70m (28ft 7in)
Working outreach
Telescopic Upper Boom
Greater accuracy when positioning platform
Fully Proportional Hydraulic Controls
Simple, reliable & easy to maintain
Hydraulic Outriggers
For quick & easy setup
Bi-Energy Available
Optimising utilisation
|
|
Nifty 120 / TM34
12.33m (40ft 5in)
Working height
5m (16ft 5in)
Working outreach
Fully Proportional Hydraulic Controls
Simple, reliable & easy to maintain
Bi-Energy Available
Optimising utilisation
Weight Saving Design
Easily towed & manoeuvred on site
Hydraulic Outriggers Available
For quick & easy setup
Telescopic Axles
Access through double doorway openings
|
|
Nifty 90/TM24
9.50m (31ft 2in)
Working height
3.50m (11ft 6in)
Working outreach
Fully Proportional Hydraulic Controls
Simple, reliable & easy to maintain
Compact Outriggers
For setup in confined areas
Weight Saving Chassis Design
Easily towed on the road & manoeuvred on site
Telescopic Axle
Access through single doorway openings
|
|
Nifty 120T / TM34T
12.20m (40ft)
Working height
6.10m (20ft)
Working outreach
Telescopic Upper Boom
Greater accuracy when positioning platform
Bi-Energy Available
Optimising utilisation
Hydraulic Outriggers
For quick & easy setup
Fully Proportional Hydraulic Controls
Simple, reliable & easy to maintain
Telescopic Axles
Access through double doorway openings
|
|
| ... products without technical information |
| |
We manufacture air springs in an area of 4000 sqm.
We have approximately 200 sorts of products for trucks, buses and industrial trailers and we always increase our product range by studying on new models.
We continously increase our capacity depending on clients intensive interest and demand of the market.
Our aim is to reach 360.000 pieces for annual capacity in 2007.
We produce the air springs with high quality standarts by test applications and interval professional controls in professional production processes from raw material to end product.
We guarantee definitely our products in accorance with methods from the independence of production faults and specified properties .
We use special professional rubber and professional fabric for production of air springs which has improved professional chemical attribute .
As a result of this we can say that we have technical knowledge and equipment for the best acceptance standarts of air professional spring production.
Our products have not difference of quality from the OEM brands such as ; Contitech, Firestone, Goodyear..etc. However the important difference is our prices much more competitive than the others.
Our main principles is to have competative prices, high quality, honesty and long-term business opportunity for our customers.
Sincerely yours, |
|
| ... products without technical information |
| |
| ... products without technical information |
| |
| The first product in China that has passed CE certification conducted by third party The products has passed ISO9001-2000 quality management system certification The products has passed ISO14001 environment management system certification The product has passed GB/T20081 occupational health safety management system certification |
|
S 2000 Plus
- Upto 15 % more lift at optimized construction height
- Best power to weight ratio
- Unrivalled corrosion resistance through zinc phosphate and powder painting
- Slightly operating sturdy gear, comfortable to handle
- Reinforced Compensating Foot - the optimal solution for industrial trailers with pneumatic suspensions (130 mm compensation)
- Modular system for OE and replacement market; 5 types of feet interchangeable
- Enormous buckling strength through full length welded back plate, ideal to accept auxiliary equipment, such as holder for brake professional shoe or fire distinguisher
|
|
With the industrial trailer disconnected, a mobile support winch will contribute to a safe loading/unloading process. If a trailer is entered with a forklift while docked at a loading bay, it can tip like a see-saw across its support stands.
Furthermore, the support stands can be damaged by professional brake and acceleration maneuvers. Simply place the mobile support winch to avoid these situations. haacon offers such industrial winches with two gears and 350 mm stroke. Thus, the winch can be adjusted to different heights. This robust support winch can lift loads of up to 15 tons. It is covered by a damping rubber cover and its head can be tilted by 3 degrees in all directions and can be swivelled horizontally by 8 degrees. The large all-rubber professional tires will let you maneuver this wince easily and ergonomically correct, even if the ground is uneven.
|
|
engine-compressor
sale and mounting |
|
| Pratt & Whitney Power Systems' newest product, the FT8 MOBILEPAC, is a self-contained, gas turbine powered electric generating unit using PWPS' efficient FT8 gas turbine. This new mobile package consists of two primary units - the power professional trailer and the control trailer. The power trailer contains the gas turbine and the electric power generator, while the control trailer houses the electrical control unit. |
|
|
|
