|
|
Hoffer flow control
Controls turbine flowmeters
Of all the various types of flow transducers available to industry today. None are so universally applicable as turbine flowmeters. They continue to be the most common way to measure flow electronically and have the ability to measure available upon request offering detailed, technical information.
|
|
OUTSTANDING FEATURES
· Low cost.
· Outstanding accuracy.
· Provides wide flow ranges.
· Wide variety of process connections
available.*
· Operate over a wide range of
temperatures and pressures.
· Exclusive use of hybrid ceramic ball
bearings provide superior life.
|
|
This multi-range radial flow turbine meter uses a low inertia turbine supported on robust sapphire bearings in a chemically resistant housing. Ten flow ranges, a choice of "plug in" end connection fittings, and two styles of pulse detection system make this meter one of the most flexible available. The unit has individual traceable calibration, and can be considered as simple apparatus when placed in a hazardous area.
The unit can be configured with fittings and electrical connections to suit OEM requirements. Particular advantages include a wide flow range, long bearing life and in-line design. Output is via a pulse, which can be monitored by simple electronic systems.
|
|
Derived from the FSC Series, the F2000 Quad
Series of fl ow sensors utilizes two fl ow transducers
which are 90-degrees electrically out of phase
from each other. With the addition of a second
fl ow transducer, it is possible to monitor fl ow in
both directions. The F2000 Quad is suitable for
up-down counters that can discern the leading
and trailing edges of the quadrature signals.
Current applications include using the F2000 as
a speed-sensing device on mobile equipment.
This bi-directional fl ow sensor can be used as
a governor, sending frequency signals back to
a PLC which enable it to make the necessary
adjustments. Other functions of the fl ow sensor are
in linear applications where accurate positioning
is required.
Quad Series Turbine Flow Sensor
Provides Bi-directional Flow Rate Measurement
Viton
|
|
|
The rotating movement of the impeller is transferred by a modulator disc to the sensor system of the FLYPPER electronic counter module.
|
|
● Connecting size: 3/8", 1/2", 3/4", 1" NPT female standard
● Power Supply: 3.8V to 30VDC
● Output: Sink (NPN)
● Material: Body-Polypropylene; Cover-Acrylic,PP,PTFE available; Rotor-PVDF; Shaft-Ceramic; Bearings-Ceramic
● O-ring: Viton
● Max. Temperature: 70ºC
● Max. Pressure: 10kg/cm²
● Accuracy: ±2% F.S
|
|
|
|
|
|
M2517 / F0110 Insertion Paddlewheel Flow Sensor & Rate Indicator & Totalizer
The Model 2517 Insertion Paddlewheel Flow Sensor provides a reliable and economical means of monitoring flow. One size sensor is field adjustable for use in 1.5" to 24" diameter pipes.
The Model F0110 Battery Powered Indicator simultaneously displays both Rate and Total on a large alphanumeric LCD display. Easy set-up is accomplished via the front panel three-position keypad.
TYPICAL APPLICATIONS
• Potable Water
• Cooling Water
• Irrigation Systems
• HVAC
• Condensate
• Pump Protection
• Boiler Feed Water
• Groundwater
FLOW SENSOR SPECIFICATIONS
* Power: None (self generated)
* Output: Coil
* Pipe Size Range: 1.5" to 24"
* Velocity Range: 1 to 30 fps
* Flow Range: (see chart below)
* Accuracy: +- 2% of full scale
* Repeatability: +- 0.5% of full scale
* Temperature Range: 200° F maximum
* Pressure: 250 PSI maximum @ 70° F
* Process Connection: 1.5" MNPT
* Conduit Connection: 0.5” FNPT
* Weight: 2.5 Lbs.
* Cable: 2-conductor shielded twisted pair, 22 AWG, 25’ standard, 200’ max.
|
|
Paddlewheel flow meters for pipe sizes 1/2-8 inches
-High-quality ruby bearings for excellent low-flow performance and long life
-One easily-replaced moving part
-Pickup exerts no magnetic drag on the rotor
-Square-wave frequency output can connect directly to PLC’s or counter controls
-Indicator or transmitter can be mounted on the flowmeter or remote
|
|
MW-100
Mini-Wheel Flowmeter with In-line flow
Water Calibration Range: 0.5 – 20 L/min
Body Material: 316SS
Port Sizes: 1/4", 3/8" FNPT
M-10001
Low Flow Paddlewheel Flowmeter
Water Calibration Range: 0.022 – 0.30 L/min
Body Materials: Aluminum, PTFE
Port Size: 1/4" FNPT
M-10000
M-10000 series Paddle Wheel Flow Meters belong to high accuracy Tangential type turbine meters with wide range ability and high accuracy. These could be with visual indication or remote monitoring. These are more accurate than ever before and are available in different types of materials and sizes for specific applications.
Port Sizes: 1/8" to 1"
Flow Ranges: 0.1 LPM to 250 LPM
Materials: PTFE, 316SS, Celcon, Brass
|
|
|
|
|
|
Litre Meter developed the Pelton wheel principle as the best to achieve accurate measurements of low flows.
A single turbine ring size is common to all Litre Meter flowmeters. The turbine rotor is based on a highly efficient 'Pelton Wheel' design. It is available in various chemically resistant materials such as PFA (Teflon)and PVDF. The rotor ferrites are sealed to make them non-wetted parts. Sapphire bearings are offered for maximum chemical resistance as standard. These provide a very low friction mechanically-robust bearing with long life characteristics.
The rotation of the rotor is sensed by an electronic system using the interaction of ferrites in the rotor tips with a pickup coil. No drag is imposed on the rotor which assists in the measurement of extremely low flows. This, coupled with the efficient Pelton Wheel design and low friction bearings gives the meter major advantages. The complete turbine ring assembly can be easily removed with the meter remaining in line if cleaning is required.
|
|
Titan manufacture flowmeters based on the Pelton wheel technique. This well proven method is the ideal way of measuring low rates of flow of low viscosity liquids. Advantages are wide flow range, good linearity and repeatability, with a compact, low-cost design. The unit can be built totally from engineering plastics, with no metallic parts in contact with the fluid monitored.
The 800, 900 and 1000 series flowmeters can measure flows from 0.05L/min to 30 L/min, or are available as simple flow switches, to alarm on flow failure, low or high flow. End connections are typically BSPF threads or hose barbs, other connections can be supplied.
|
|
This competitively priced instrument (flowmeter - thermometer) has been developed for use under challenging circumstances. Because of its different impellers, you can use it to measure amost any liquid or gaseous medium.
Fields of application :
Measure rivers flows
Irrigation canals
Ocean flows
Air conditioning conduits
Sewage flows
Ventilation shafts
Hydrological studies
Aerological studies
Chimney flues
Spécifications Techniques :
FLOW SPEED MEASUREMENT
Units :
km/h, mph, knots, m/s and cm/s
Accuracy :
+/- 5 % from - 10° to + 50°C
Measuring range :
2 to 150km/h
TEMPERATURE
Units :
°C, °F and windchill
Accuracy :
+/- 1°
Functions :
Current, minimum, average, maximum temperature and windchill factor
|
|
|
Blancett sanitary turbine flow meters for liquids meet the 3-A standard for C-O-P (clean out of place) and S-O-P (sterilize out of place) procudures. Flow rates to 400 GPM, clamp sizes to 2.5".
|
|
|
Blancett turbine flow meters for liquids are available in pipe sizes from 1/2" to 10" and flow ranges from 0.6-3 to 500-5000 GPM. Blancett turbine meters use high-quality materials of contruction, including 316 stainless steel and tungsten carbide, to ensure high performance in rugged and aggresive environments. Blancett Model 1100 turbine meters offer +/- 1% accuracy and 0.1% repeatability, and they are rated to 350 degrees F (177 degrees C). Uses include secondary oil recovery, semiconductor, food and beverage, and pharmaceutical.
|
|
Turbine flow meters are mediate volume transmitters similar to a Woltmann's sailwheel meter. Thanks to extremely rapid response times and high resolution turbine flow meters are perfectly suitable for fast filling systems.
Due to an enormous pressure and temperature resistance turbine flow meters will also be the perfect choice for water torch systems, temperature control units, cooling circuits or painting systems, where the consumption of solvents and di-water needs to be measured.
|
|
|
Based on the proven design of the HM turbine meter, the HMP Turbine Flowmeter satisfies the specific design and performance requirements of Life Sciences applications. The HMP uses a bushing and shaft combination which makes the HMP suitable for intense sterilization processes and allows for steam blow down.
|
|
Our Proportional Velocity (PV) Meter is a flow meter that will handle problem fluids that damage other meters. While other meters may stop or be damaged by such common elements as sand, grit, stones (up to 0.25" diameter in our smallest meter), or even wood and rubber, Oilgear flow meters are products on which you can rely for unsurpassed performance.
Advantages of the Oilgear PV Meter
* Large Particle Clearance (up to 0.25" diameter in our smallest meter)
* Long Life in Contaminated Liquid
* High Tolerance to Overranging
* Readout Flexibility
* Mechanical Readouts
* Electrical / Electronic Readouts
* Calibration
* Accuracy
* Repeatabilit
|
|
PLASTIC IMPELLER FLOWMETERS FOR CHEMICALS
These flowmeters have a pulse out. Construction is simple. Rangability is good. Cost is low.
SRP and SRT flowmeters
-3/8 to 1 inch
-5-40 GPM max flows
-20-150 LPM max flows
-TFE or Polypro bodies
-Threaded ports
-High resolution rotors optional
-Ruby bearings
-Very high rangability
|
|
Measuring -/switching range 0,08-5 l/min ...40-160 l/min. water
Connection G 1/4...G 1 1/2, flange DN 15..DN 50,
Material brass, st. st., trogamide, polysulfone, PVDF
Max. pressure 6/10/16/100 bar
Max. temperature 80 °C
Accuracy ± 2,5% FS
Relays; option analogue output, counter, batcher,
Digital display
|
|
|
The Litre Meter pelton wheel flowmeter was first patented in 1975 and has an established reputation for function and reliability. Flows from 0.004 l/min can be metered up to 28 l/min using our LM series range. Large flowmeters are provided utilising the orifice/bypass principle where a wide flow range is given and the ability to measure low flows is retained. Pelton Wheel flowmeters are suitable for low viscosity clean fluids with variants in all- PFA Teflon for maximum chemical resistance and high pressure types to 2000 bar at the other end of the spectrum.
|
|
Measuring liquids and liquefied gases in the chemical and petrochemical industrie, in the mineral oil industry, in the food and beverage industry and loading systems, especially for high operating temperatures and low viscosities.
Turbine Meter RQ Series 1
DN 10 - 65
PN 16 - 320
flow rates 0,15 - 120 m³/h
accuracy ± 0,15 % over a reduced flow range ( for viscosities of 0,2 %u2013 0,7 mPas )
accuracy ± 0,25 - 0,3 for the standard - flow range ( for viscosities of 0,2 %u2013 0,7 mPas )
operating temperature according to design -196°C to 250°C
for custody transfer admitted
|
|
LC Turbine Flow Meters
- Sizes: 1/4" through 12"
- Flow Rates: 0.25 - 12,000 GPM
- End Connections: ANSI, NPT (¼ to 2"), Tri Clover, Flare Tube, Wafer
- Pressure Ratings: 150 - 2,500 ANSI
- Materials of Construction: Body: 304,316,316L SS; Rotor: 17-4 pH SS
- Bearing: Metal Ball, Carbide Sleeve, Cryo Ball, Fluorosint Sleeve
- Accuracy: Capable of ±0.25% of rate over 10:1 range
- Repeatability: Capable of 0.05% of reading over entire range
|
|
|
The Blancett QuikSert In-line Turbine Flow Meter provides the high accuracy and rigorous design of the standard Blancett turbine, but in a wafer-style mounting configuration. With a unique "between-the-flange" design, the need for mating flanges is eliminated, saving installation time and cost, and allowing for limited space requirements.
|
|
The CAT3 is a DC or AC powered, microprocessor
controlled transmitter. It outputs a pulse scaled per unit of
flow, and analog signal proportional to flow rate. The
CAT3 can be configured with High and Low alarms.
|
|
| ... products without technical information |
| |
|
|