|
|
Analog Input Flow Indicator - Series FIV
Flow Rate and Totalization
Sight Flow Indicator - Series SF2
1/4 to 1" Connection Size, SPDT or Pulse Output, Window Style
Sight Flow Indicator/Transmitter - Series SFI-800
1/2 or 3/4" Connection Size, Optional Output Sensor Package
Sight Flow Indicator/Transmitter - Series SFI-100T
1/2 or 3/4" Connection Size, Optional Output Sensor Package
|
|
Visoflow WR1-...GM/GK
Mechanical Flow Indicator for liquids, with a rotor for quantitative flow indication in a special tube-shaped glass housing. A signal-red rotor provides a directly flow-proportional indication of the momentary flow-rate. Rugged design in brass or stainless steel.
cleaning mechanism of the internal surface of the glass
visibility of rotor 360°
floating bearing for liquids
grease-free ball bearing for gaseous media
|
|
Rotor Flow Indicator w. Self-cleaning mech. DAA
Flow Indicator with Rotor DAH
Rotating Vane Flow Indicator DAF
Rotating Vane Flow Indicator DIH
Rotating Vane Flow Indicator DIG
Rotating Vane Flow Indicator DKF
Flow Indicator with Rotor DAR
Flow Indicator with Flap DAK
Flow Indicator with Flap and Scale DAZ
Flow Indicator with/without Ball DAB
Flow Indicator with Ball DKB
|
|
|
Flow Indicator, Paddlewheel. This polystyrene, bright red paddlewheel indicates liquid or gas flow from 5 ml/sec to 95 ml/sec. The clear outer case allows for unobstructed view of the wheel which spins freely with flow. Not for use with corrosive fluids or temperature over 122° F (50° C). Can be used to connect tubing I.D. of 3/8" to 9/16" (10-14 mm) I.D.
|
|
|
Designed with body in aluminium, nickel-plated brass or 304 stainless steel. Execution with visual indication only, graduated scale on the glass tube, max. pressure 15 bar and 0,1 to 60 LPM flow rate; electric execution with visual indication, 1 or 2 adjustable alarm points, max. pressure 15 bar and 0,1 to 60 LPM flow rate; simple electric execution with 1 or 2 adjustable alarm points, max. pressure 150 bar, 0,1 to 140 LPM flow rate. All these models can be supplied with specific springs depending on the fluid viscosity up to 200 Cst. Electric execution for water application with 1 or 2 adjustable alarm points, 0,3 to 60 LPM flow rate, max. pressure 50 bar.
|
|
- Piston type
- Fluid : Water , oil , other liquid available
- Flow range : 15 ~ 24000 l/h (at Water)
- Accuracy : ± 3 % F.S , On request : ± 2.5 % F.S
- Size : 1/4" to 2-1/2"
- Connection Size : NPT , Flange Type on Request
- Working Limits : Temperature : -10°C to +150°C
- Max. Pressure : 30 kg/cm²
- Housing enclosure : IP 65
- Housing material :
NS,CS,MS types-Aluminum Alloy
ES type-316SS
- Lens material:Safety glass
- Mounting:Vertical,horizontal available
- Materials : Brass , 316SS wetted parts
- Alarm switch : Micro switch,inductive switch available
|
|
Flowmeters, Switches, and Transmitters
Flowmeters from Orange Research provide accuracy and reliability in an affordable, rugged package. These industrial quality flowmeters combine modern technology and materials with a familiar easy-to-read pointer and dial gauge. A patented magnetic movement allows flow sensing at high line pressures and operation in any orientation.
|
|
|
Pointers of passage who come used for the visual control of the flow of liquids in the pipages, realized or in the flangiata version that in the threaded version, to single and double crystal, realized in grey cast iron, brass, carbon steel, stainless steel until to series PN 25.
|
|
General description:
This durable, rugged in-line polystyrene device provides immediate visual indication of liquid or gas flow from 95ml/sec. down to 5ml/sec. (or down to 3ml/sec. in fluid with air bubbles removed). Cannot be used with corrosive fluids or over 64ºC (150ºF). Dimensions are 90 x 16 x 55mm (31/2 x 3/4 x 21/8"). Serrated tubulations accept 10 to 14mm (3/8 to 9/16") ID tubing. Per each
Clear polystyrene outer case reveals bright red indicator paddle wheel
- Paddle wheel spins freely with flow
|
|
Rotor Flow Indicator w. Self-cleaning mech. DAAFlow Indicator with Rotor DAH
Flow Indicator with Rotor DAHRotating Vane
Rotating Vane Flow Indicator DAFRotating Vane
Rotating Vane Flow Indicator DIHRotating Vane
Rotating Vane Flow Indicator DIGRotating Vane
Rotating Vane Flow Indicator DKF
Flow Indicator with Rotor DAR
Flow Indicator with Flap DAK
Flow Indicator with Flap and Scale DAZ
Flow Indicator with/without Ball DAB
Flow Indicator with Ball DKB
Flow Indicator with Drip Tube DAT
|
|
-Large operating temperature range
-Small size
-Variable fitting position
-Simple to mount
The airflow monitor (NC/NO) is designed to indicate the loss of air movement of a fan or filter fan.
The contact detects the loss of air movement caused by fan failure or blocked filter media regardless of direction of air.
Its simple mechanical operation makes it a viable alternative to
electronic monitoring systems.
Approvals: UL File Nr. E 250507
|
|
| ... products without technical information |
| |
A portable sulphuric acid dewpoint monitor (Lancom 200) is designed specifically for plant requiring only periodic monitoring of the sulphuric acid dewpoint temperature for boiler efficiency checks, corrosion protection and evaluation of the effectiveness of corrective measures such as fuel additives and changes in the combustion conditions.
A continuous sulphuric acid dewpoint monitor (Model 440) is permanently installed in order to optimize combustion conditions by maintaining the temperature of the flue gas slightly above the sulphuric acid dewpoint temperature. It can continuously monitor the changes in boiler operation and provide a direct loop input to the boiler's own combustion control system.
|
|
MOLTEN METAL TEMPERATURE INDICATOR
PRODUCT DESCRIPTION:
Libratherm offers microcontroller based Molten Metal Temperature Indicator model LMI-2010, which is designed to accurately measure temperature of the molten metals, both ferrous and non ferrous. The measurement of this temperature is a critical process, since the expendable thermocouple is dipped for merely 3 to 4 seconds and then withdrawn. In this short measurement time, the operator is guided through the measurement cycle by audio/visual alarms for thermocouple continuity, measurement in progress and measurement over. Any error in measurement or thermocouple open condition is also immediately detected by activating the audio/visual alarm.
User can select the desired type of thermocouple (either K, R, S, or B type, (depending upon the measuring range from 1200 to 1800oC), and can also set other parameters using front panel key board. During measurement, the indicator ignores the slag temperature and the Average or Plateau reading is determined using the advanced algorithm and the same is latched and displayed on the bright 7 segment 2” LED display. This reading can also be displayed on 4” remote display LRU-2010 and can be logged on to a computer using serial RS485 MODBUS RTU protocol for recording and analysis purpose. Libratherm offers supporting window based software.
|
|
- Big keys for use with gloves
- Programmable characteristic curve end points (up to 24 control points)
MIN/MAX value detection,
- Display-Hold
- Auxiliary power output for measuring transducer/sensor
- Optocoupler or relay outputs
- Programmable limit values
- Optional: with serial interface
|
|
The product family SITANS T offers a complete spectrum at temperature sensors and transmitters. Select the suitable product to your application, from simple applications to intelligent and devices with fieldbus communication.
Head transmitter SITRANS TH100, TH200, TH300, TH400
These devices are installed in the connection head of the temperature sensor. Here they amplify the weak sensor signals and reduce plant noise on signal line.
Field Transmitter SITRANS TF
Field Transmitters are installed directly on the sensor thermowell or near the sensor, if the conditions like vibration or ambient temperature allow no installation of head transmitters. Available for intrinsic safety and explosion proof application according to international standards.
Panel Transmitter SITRANS TW
Four wire transmitters are installed in the control room. Connected directly with auxiliary power they allow universal use. Extended diagnosis, simulation and signal switch are further features.
Temperature Sensors
Whether flue gas measurement in combustion plants, in pipes and vessels, Food and Beverage, Pharmacy or other applications. A broad range of temperature sensors and complete measuring points are available.
Digitales display thermometer SITRANS TF2
Combines three devices in one! A PT100-Thermometer, a 4..20mA Transmitter with simple setup via 3 push buttons as well as a digital display. Thermowell and housing are made from stainless steel.
|
|
|
Quest Technologies offers a variety of thermal environmental and WBGT heat stress monitors. Datalogging heat stress monitors also available.
|
|
Large, well illuminated clear display, on-hand-operation by THUMB-WHEEL, rigid housing.
Portable Digital-Thermometer:
- C100: 1 channel, for Pt 100 (4-wire)
- C110: 2 channels, for 1 x Pt 100 and 1 x Thermocouple
- C120: 2 channels, for 2 x Thermocouple, indicating also differential temperature
Portable Indicator for Humidity:
- E200: Temperature and relative humidity, with rigid probe
- C200: Temperature and relative humidity, with rigid probe
- C210: Temperature and relative humidity, with flexible probe
Portable Digital-Manometer:
- C300: Barometer (barometric air pressure)
- C310: -500...+500 Pascal pressure+vacuum+differential
- C320: -100...+100 mbar pressure+vacuum+differential
- C330: -1000...+2000 mbar pressure+vacuum+differential
Portable Universal Indicators:
- C900: for all transmitter with standard signal output (e.g. 4...20 mA, with power supply for the transmitter)
e.g., together with our pressure transmitter, as Portable Digital Manometer, ranges 0...10 mbar up to 0...2000 bar available.
|
|
Enhanced indicator
Double input Indicator - Transmitter with four addressable alarms
1/8 DIN 96x48
Universal input for temperature sensors, mA, mV, Volt, IR, custom
High level second input 0/4...20 mA, 0/1...5, 0...10 V
3 digital inputs
3 SPST relays NO, 1 SPDT relay
0/4...20 mA retransmission output
4 addressable alarms with delay, latching and blocking functions
ISA sequence on alarms
Display of MIN, MAX value
Hold and temporized hold to display peaks
Dedicated alarm acknowledge key
5 digits 2 colors display with different combinations
RS 485 serial communications
Power supply 100...240 Vac, 24 Vac,dc
Transmitter power supply
IP65 front panel protection
|
|
|
This versitile range of cost effective panel indicators accept all common industrial sensors and have a complete range of output options. From the cost effective DM3400 range through to the highly advanced DM3600 which can customise its function to suit your specifc application, there's a panel meter to meet every requirement.
|
|
|
The Tecal Accu-Temp is a good choice for use as a laboratory grade reference thermometer. It's available in a single or dual channel model, along with direct temperature readout in degrees F, C and ohms. Combine the Tecal Accu-Temp with one of our secondary standard PRT's for a high accuracy temperature measurement system. Don't rely on battery operated, low accuracy hand-held model PRT indicators for your critical temperature measurements.
|
|
|
The QUESTemp® II personal heat stress indicator monitors an individual’s body temperature for indications of the onset of heat stress. It warns the user when their personal body temperature has risen above the "safe" level and that action should be taken to allow the body to cool.
|
|
The powerful indicator N1500 offers among its universal input and the 2 relay outputs for the monitoring of the threshold values many other functions. The Min.- and Max.-values can be prompted with just a keystroke. Also there is a Hold and a Peak-Hold Function whose readouts can be deleted using either the function key or the digital input. The high tact frequency of 15 measurements/second (5 measurements/second when using linear input, thermocouples or Pt100) allows the N1500 indicator to monitor fast processes. It offers also the possibility to linearise the measurement signal when using non-linear input signals (mV, V, mA).
Features:
- Universal input
- Linearization of mV, V, mA signals
- 2 Relay outputs
- 6 Alarm features
- Voltage output 24 VDC for external 2-wire transmitter
- Memory for MAX and MIN values, hold and peak features
See more information in our shop:
***www.temperature-shop.de***
|
|
Universal digital panel meter
Reference : AK9400U-2
Setable with keyboards on front plate
Display 99999 Counts
Process input current (<22mA), tension (< 200Vdc)
Potentiometer
Température input Pt100 and Thermocouple
Sensor power supply 24Vdc, 22mA
4 relays output 1RT.
2 insulated analogue outputs curent and tension
1 RS485 MODBUS, JBUS output, allowing configuration and mesure
Input/output insulation 2500V
Power supply 20Vdc to 370Vdc and 80Vac to 265Vac.
|
|
| ... products without technical information |
| |
|
|