|
|
The GF03 Flare and Variable gas flow meter utilizes FCI's exclusive patented thermal resistance professional analyzer correction design that combines flow and gas composition sensors in a proprietary gas calibration technique. This innovative engineering breakthrough in thermal dispersion technology provides superior accuracy and repeatability in changing gas compositions.
The GF03 single insertion flow element design offers simplified installation and more reliability at a lower cost total cost than any other mixed gas application solution. FCI's unique design eliminates the need for additional temperature and pressure devices that increase the initial purchase price and maintenance costs typical of ultrasonic technology.
|
|
| The RNG Series meter is an insertion-style gas flow meter designed to offer high accuracy measurements over an extremely large flow range. The meter has no moving parts and is virtually maintenance-free once installed. The RNG series is suitable for most gas types, including compressed air, natural gas and wet or "biogas" applications. All meters in this series are loop-powered devices with standard HART® communications for ease of field programming and system integration. Through the use of an internal INDUSTRIAL RTD and an external manufacturer of pressure sensor (optional), the flow meter software will compensate for changes in pressure and temperature, to achieve an accurate mass flow measurement. |
|
Professional cylinder professional sampler for accurate samples of gas and two phase liquids.
Flow through design assures representative sample
Self-sealing quick disconnects for easy removal and transport of sample cylinder
Outage tubes or volume reduction vessels for prevention of over pressurization |
|
GOW-MAC provides complete solutions for bulk and specialty gas handling. From system design and safety monitoring to installation, training and instrument repair, you can be sure that your project will meet your performance goals, as well as comply with local, state, and federal regulations.
Design
Our engineers will design, construct and install the systems needed to provide you with the most effective solution to your gas handling requirements, including cylinder filling, mixing and the analytical capabilities that the specialty gas market demands.
Products include:
Specialty Gas Analytical Package Labs
· Rack or wall mount
· High and Ultra High Purity (Grade 6)
· Special Custom Designs
Specialty Gas Control Panels
· Gravimetric and Volumetric Ultra High Purity Gases
Cylinder Processing Systems
· Flammable and Oxidizer
Manifolds
· Filling, Delivery, Custom
Cylinder Industrial dryers
·12 or 24 station
Cylinder Rollers
· 4, 6 or 8 cylinders
Custom High Purity Control Panels
· Electropolished
· Stainless steel
· Orbitally welded
· ...and much more |
|
| ... products without technical information |
| |
Schutte & Koerting, designer and manufacturer of equipment for the process and power industries since 1876, re-introduces their jet supplier of compressors which are used in the process, petroleum, power, gas, paper, and other industries to circulate steam, boost low-pressure steam, and to mix, transfer, and compress gases.
A jet compressor is a type of ejector which utilizes a jet of high-pressure gas as an operating medium to entrain a low-pressure gas, mix the two, and discharge at an intermediate pressure. Gases can be steam, air, propane or others. When both motive and suction gases are steam, the compressor is generally referred to as a “thermocompressor”.
|
|
AM
Pressure booster
translation 1:2 to 1:5,
max. output pressure 60 bar
|
|
| Air driven gas boosters are suitable to pump or compress almost any kind of gas, from shopair to oxygen. They are available in all kind of models, for example single stage, double acting etc. Applications are filling gasbottles and compressing and storing high pressure shopair for testing cocks, etc. |
|
Advantages:
- Working pressures up to 1,250 bar / 18.000 psi .
- Low noice level even at high cycling speed.
- No mechanical pilot cocks.
- Proven reliability under severe conditions.
- Modular, robust and modern design.
- Easy to change ratio of the booster.
- Easy to convert a booster from single- to double acting.
- Light weight air cycling spool.
- Easy maintenance. |
|
| Air-cooled booster-manufacturer of compressor with 1 stage and 2 or 3 cylinders. Many of the basic parts for example piston, cylinder and cocks are used in our well known 40 bar compresors. This machine is designed for a minimum of maintenance. The main-usage for this booster is to blow PET-bottles in combination with a screw compressor manufacturer. The results of a combination like this are competitive prices and max. profit. |
|
Haskel International Air and Hydraulic Driven Gas Boosters provide for pressures up to 39,000 psi (2690 bar). Used for virtually all known gases, these boosters are ideal for increasing gas pressure, transferring high pressure gas, charging cylinders and scavenging. Key features include:
Air driven - no electric required
No airline lubricator required
Hydrocarbon free - separation between air and gas sections
Pressures to 39,000 psi (2690 bar)
Wide range of models
Built-in-cooling on most models
Standard and custom systems available |
|
Haskel International Air and Hydraulic Driven Gas Boosters provide for pressures up to 39,000 psi (2690 bar). Used for virtually all known gases, these boosters are ideal for increasing gas pressure, transferring high pressure gas, charging cylinders and scavenging. Key features include:
Air driven - no electric required
No airline lubricating required
Hydrocarbon free - separation between air and gas sections
Pressures to 39,000 psi (2690 bar)
Wide range of models
Built-in-cooling on most models
Standard and custom systems available |
|
GAS BOOSTERS
Llquld pumps Air or Gas driven
- 31 models with area ratios 25 : 1 to 600 : 1 and pressures to 90000 PSI
Gas boosters Air or Gas Driven
- 24 models with area ratios 4:1 to 150:1 and pressures to 25000 PSI
Air pressure amplifiers Air or Gas Driven
- 4 models with area ratios 2:1 to 5:1 and pressures to 1250 PSI Benefits :
- Startfstop/restart underfull load. Hold maximum pressure
indefinitely
- No electrical hazard in explosive or damp environments
- Simple maintenance
- Simple control influid power circuit
- Infinitély variable cycling speeds and output Typical applications :
- Hydrostatic testing tanks, professional piping, instruments
- HydrauMc clamps suppliers, industrial presses, safety, brakes> Bottled gas transfer
Gas injection plastic forming or Chemical process Provide higher test station air or nitrogen pressure economically
|
|
- High pressure capability - up to 25,000 PSI.
- Boost directly from unregulated high pressure gas cylinders
or pipelines.
- Maintain gas purity.
- One-man portable.
- No electrical or cooling connections needed.
- Intrinsically safe.
- Boost virtually any noncorrosive industrial or laboratory gas.
- Simple maintenance.
- Mount in any position.
- Weatherproof. |
|
The model HIHPG3-20147 Package is a two-stage unit that
can boost 100 PSI Shop Air up to 4500 PSI and also be
powered by shop air. The advantage is no dependence on
nitrogen cylinders. Disadvantages are considerably slower
fill speeds (Even with a 10 H.P. air compressor suppliers), and the need
to Chemically Dry the air to -50°f dewpoint or better before
being boosted. |
|
| ... products without technical information |
| |
| ... products without technical information |
| |
... see all the products in the category
Fuel cells
|
With one of the most comprehensive families of sensors and on-line industrial analyzers for pH, conductivity and dissolved oxygen, Yokogawa is recognized as a world leader in the field of analytical equipment.
|
|
The Magna Flow regulator valve with an easy to read manufacturer of micrometer dial offers an amazing 1100 precise set points to accurately control flow of gases or liquids. The extremely high CV of the Magna Flow control valve suppliers enables very high flows for whatever media is being controlled, up to 200 PSIG pressure or full vacuum. Linear flow characteristics provide easy to set and precise metering of gases and liquids for almost any application where accurate results are required.
Available in either light weight impact resistant nylon or clear polycarbonate construction, the Magna Flow Control Cock offers superior strength and corrosion resistance, making it ideal for use in hundreds of different applications. Simplicity of construction, with removable top and bottom caps, provides easy disassembly for cleaning or maintenance without removing the valve from service. Proven O-ring professional seals provide a positive zero tight shut-off. Replacement of seals, if required, is quick and easy because disassembly is simple and fast. The Magna Flow Control Valve offers all these features at a very affordable price. |
|
Leading technology in cold regenerated professional dryers (Series ecodry), heat regenerated adsorption dryers (Series concept) and also in breathing air purification technology (Series breathing star, according AS2299, ANSI Z or if maximum quality is required, according to PHARMACOPČE EUROPČNNE). For compressed air and technical gases.
Units available up to 350 bar ü/ 5000 psig (standard), other pressures on request.
Other applications? Talk to us! 0049 2054-934-0 Mr. Christian Ruff
Standard equipment high efficient heatless dryers:
Complete purification system consisting
ZANDER-Microfilter, series XP as prefilter
Fully automatic ZANDER adsorption dryer
with intelligence-multitronic-control device.
Standard equipment heat regenerated dryers:
Fully automatic operating adsorption dryer with externally heated regeneration air with electrical heater.
Patented vacuum regeneration, without purge air.
Compl. with maintenance free four-way cock.
Processor-control, desiccant-filling.
Inlet and outlet piping zinc galvanized.
Vessels acc. to PED seperate approval/CE-standard.
Flange connections acc. to DIN 2633.
|
|
Industrial separators, fine and superfine filtration technology for removal of liquid (e.g. water or oil) and solid
particles down to 1µ from compressed air and gases.
Efficiency at normal capacity: 99,9999% (1µ).
Residual oil content: ≤ 0,5 mg/m3 (1 bar (abs.), 20°C).
Recommended temperature range: 1,5°C - 80°C.
Standard equipment: Complete filter including automatic condensate drain.
CE mark in accordance with the Pressure Equipment Directive97/23/EC (PED) for Fluid Group 2. No CE mark is authorised under Article 3 paragraph 3 for smaller professional filters or CE mark in accordance with Article 1 paragraph 3.3.
Filters suitable for Fluid Group 1 see page 20.
As an option available DELTATRONIC filter monitoring. Real messurement of filter status incl. software to minimize the operating cost in relation to the differential pressure of each Filter.
Also available:
-Paint compatible filters
-High pressure filters (up to 350 bar ü / 5000 psig)
-Stainless steal filters
-Vent filters
-Filter industrial silencer
-Activated charcoal filter elements
-Sterile- and steam strainers
-Filter elements for competitor housings |
|
CNG Series
Single Tower Natural Gas Professional dryers
CNG Series adsorbers are single tower dryers designed to remove water vapor from Compressed Natural Gas in small to medium gas flow rates. Located at the inlet of the booster compression train, our unique binderless molecular sieve insures dry, pipeline quality gas (-80°F dew point or better) with minimal odorant fading.
Mobile, stationary and contracted regeneration packages available.
Single tower adsorption towers are an economical alternative to twin tower drying systems in CNG vehicular fueling stations which see intermittent or small gas flow rates (up to 300 scfm).
Down-flow design minimizes fluidization of the adsorbent insuring maximum life.
Optional Moisture Monitor & Alarm package for early performance degradation alert.
|
|
|
|
see the results for the following category
