|
|
Analog Input Flow Indicator - Series FIV
Flow Rate and Totalization
Sight Flow Indicator - Series SF2
1/4 to 1" Connection Size, SPDT or Pulse Output, Window Style
Sight Flow Indicator/Transmitter - Series SFI-800
1/2 or 3/4" Connection Size, Optional Output Sensor Package
Sight Flow Indicator/Transmitter - Series SFI-100T
1/2 or 3/4" Connection Size, Optional Output Sensor Package
|
|
Visoflow WR1-...GM/GK
Mechanical Flow Indicator for liquids, with a rotor for quantitative flow indication in a special tube-shaped glass housing. A signal-red rotor provides a directly flow-proportional indication of the momentary flow-rate. Rugged design in brass or stainless steel.
cleaning mechanism of the internal surface of the glass
visibility of rotor 360°
floating bearing for liquids
grease-free ball bearing for gaseous media
|
|
Rotor Flow Indicator w. Self-cleaning mech. DAA
Flow Indicator with Rotor DAH
Rotating Vane Flow Indicator DAF
Rotating Vane Flow Indicator DIH
Rotating Vane Flow Indicator DIG
Rotating Vane Flow Indicator DKF
Flow Indicator with Rotor DAR
Flow Indicator with Flap DAK
Flow Indicator with Flap and Scale DAZ
Flow Indicator with/without Ball DAB
Flow Indicator with Ball DKB
|
|
|
Flow Indicator, Paddlewheel. This polystyrene, bright red paddlewheel indicates liquid or gas flow from 5 ml/sec to 95 ml/sec. The clear outer case allows for unobstructed view of the wheel which spins freely with flow. Not for use with corrosive fluids or temperature over 122° F (50° C). Can be used to connect tubing I.D. of 3/8" to 9/16" (10-14 mm) I.D.
|
|
|
Designed with body in aluminium, nickel-plated brass or 304 stainless steel. Execution with visual indication only, graduated scale on the glass tube, max. pressure 15 bar and 0,1 to 60 LPM flow rate; electric execution with visual indication, 1 or 2 adjustable alarm points, max. pressure 15 bar and 0,1 to 60 LPM flow rate; simple electric execution with 1 or 2 adjustable alarm points, max. pressure 150 bar, 0,1 to 140 LPM flow rate. All these models can be supplied with specific springs depending on the fluid viscosity up to 200 Cst. Electric execution for water application with 1 or 2 adjustable alarm points, 0,3 to 60 LPM flow rate, max. pressure 50 bar.
|
|
- Piston type
- Fluid : Water , oil , other liquid available
- Flow range : 15 ~ 24000 l/h (at Water)
- Accuracy : ± 3 % F.S , On request : ± 2.5 % F.S
- Size : 1/4" to 2-1/2"
- Connection Size : NPT , Flange Type on Request
- Working Limits : Temperature : -10°C to +150°C
- Max. Pressure : 30 kg/cm²
- Housing enclosure : IP 65
- Housing material :
NS,CS,MS types-Aluminum Alloy
ES type-316SS
- Lens material:Safety glass
- Mounting:Vertical,horizontal available
- Materials : Brass , 316SS wetted parts
- Alarm switch : Micro switch,inductive switch available
|
|
|
Pointers of passage who come used for the visual control of the flow of liquids in the pipages, realized or in the flangiata version that in the threaded version, to single and double crystal, realized in grey cast iron, brass, carbon steel, stainless steel until to series PN 25.
|
|
-Large operating temperature range
-Small size
-Variable fitting position
-Simple to mount
The airflow monitor (NC/NO) is designed to indicate the loss of air movement of a fan or filter fan.
The contact detects the loss of air movement caused by fan failure or blocked filter media regardless of direction of air.
Its simple mechanical operation makes it a viable alternative to
electronic monitoring systems.
Approvals: UL File Nr. E 250507
|
|
| ... products without technical information |
| |
The powerful indicator N1500 offers among its universal input and the 2 relay outputs for the monitoring of the threshold values many other functions. The Min.- and Max.-values can be prompted with just a keystroke. Also there is a Hold and a Peak-Hold Function whose readouts can be deleted using either the function key or the digital input. The high tact frequency of 15 measurements/second (5 measurements/second when using linear input, thermocouples or Pt100) allows the N1500 indicator to monitor fast processes. It offers also the possibility to linearise the measurement signal when using non-linear input signals (mV, V, mA).
Features:
- Universal input
- Linearization of mV, V, mA signals
- 2 Relay outputs
- 6 Alarm features
- Voltage output 24 VDC for external 2-wire transmitter
- Memory for MAX and MIN values, hold and peak features
See more information in our shop:
***www.temperature-shop.de***
|
|
- Big keys for use with gloves
- Programmable characteristic curve end points (up to 24 control points)
MIN/MAX value detection,
- Display-Hold
- Auxiliary power output for measuring transducer/sensor
- Optocoupler or relay outputs
- Programmable limit values
- Optional: with serial interface
|
|
Enhanced indicator
Double input Indicator - Transmitter with four addressable alarms
1/8 DIN 96x48
Universal input for temperature sensors, mA, mV, Volt, IR, custom
High level second input 0/4...20 mA, 0/1...5, 0...10 V
3 digital inputs
3 SPST relays NO, 1 SPDT relay
0/4...20 mA retransmission output
4 addressable alarms with delay, latching and blocking functions
ISA sequence on alarms
Display of MIN, MAX value
Hold and temporized hold to display peaks
Dedicated alarm acknowledge key
5 digits 2 colors display with different combinations
RS 485 serial communications
Power supply 100...240 Vac, 24 Vac,dc
Transmitter power supply
IP65 front panel protection
|
|
|
This versitile range of cost effective panel indicators accept all common industrial sensors and have a complete range of output options. From the cost effective DM3400 range through to the highly advanced DM3600 which can customise its function to suit your specifc application, there's a panel meter to meet every requirement.
|
|
|
The Tecal Accu-Temp is a good choice for use as a laboratory grade reference thermometer. It's available in a single or dual channel model, along with direct temperature readout in degrees F, C and ohms. Combine the Tecal Accu-Temp with one of our secondary standard PRT's for a high accuracy temperature measurement system. Don't rely on battery operated, low accuracy hand-held model PRT indicators for your critical temperature measurements.
|
|
Features:
- Compact 1/8 DIN size fits into standard industry panel cutouts.
- Large and super bright red 0.56" LED display
- Safety screw terminals for power and signal inputs.
- Type K, J, T and RTD available
|
|
Large, well illuminated clear display, on-hand-operation by THUMB-WHEEL, rigid housing.
Portable Digital-Thermometer:
- C100: 1 channel, for Pt 100 (4-wire)
- C110: 2 channels, for 1 x Pt 100 and 1 x Thermocouple
- C120: 2 channels, for 2 x Thermocouple, indicating also differential temperature
Portable Indicator for Humidity:
- E200: Temperature and relative humidity, with rigid probe
- C200: Temperature and relative humidity, with rigid probe
- C210: Temperature and relative humidity, with flexible probe
Portable Digital-Manometer:
- C300: Barometer (barometric air pressure)
- C310: -500...+500 Pascal pressure+vacuum+differential
- C320: -100...+100 mbar pressure+vacuum+differential
- C330: -1000...+2000 mbar pressure+vacuum+differential
Portable Universal Indicators:
- C900: for all transmitter with standard signal output (e.g. 4...20 mA, with power supply for the transmitter)
e.g., together with our pressure transmitter, as Portable Digital Manometer, ranges 0...10 mbar up to 0...2000 bar available.
|
|
|
Quest Technologies offers a variety of thermal environmental and WBGT heat stress monitors. Datalogging heat stress monitors also available.
|
|
A portable sulphuric acid dewpoint monitor (Lancom 200) is designed specifically for plant requiring only periodic monitoring of the sulphuric acid dewpoint temperature for boiler efficiency checks, corrosion protection and evaluation of the effectiveness of corrective measures such as fuel additives and changes in the combustion conditions.
A continuous sulphuric acid dewpoint monitor (Model 440) is permanently installed in order to optimize combustion conditions by maintaining the temperature of the flue gas slightly above the sulphuric acid dewpoint temperature. It can continuously monitor the changes in boiler operation and provide a direct loop input to the boiler's own combustion control system.
|
|
| ... products without technical information |
| |
|
The J5 provides measurement of melt pressure and other process variables. The J5 features a large 5 digit display that can operate in either green or red or change color in case of alarm. The J5 is configurable from the front, or from a PC with a software tool. The main input is for Strain Gauge or linear DC voltage/current with square root extraction or with a 16 segment linearizer. The second input with DC voltage or current is suited to temperature indication and signal conditioning (min, max, average, ratio, etc.) when combined with the main input. The J5 has 3 digital inputs independently configurable for alarms, display and calibration handling. Up to four alarms with ISA-A acknowledge are available as well as a retransmission output and Modbus RS485 comms. The J5 has three levels of password protection and the front panel is IP65. The strain gauge bridge of the melt pressure or load cell transducer can be powered by an internally regulated 5 or 10Vdc. The reliability of the strain gauge is monitored continuously. A front panel calibration routine is provided to automatically remove zero and span offsets. The automatic calibration can also be activated by using front keys, one of the three digital inputs, or over serial comms. Tare function for load cells is provided.
|
|
The JOFRA range of IPI Industrial Pressure Indicators is ATEX and CSA certified for use in potentially explosive environments in the field or in calibration laboratories. ATEX is the primary intrinsically safe standard in the European Union, while CSA refers to relevant Canadian and USA standards.
Accurate to ± 0.05% FS, the IPI can be used as a calibration reference or in applications where high accuracy pressure measurement is required from safety valve checks to system pressure verification. This Ex certification will allow the IPI to be used in any industry where there is a risk of flammable gases. These include oil refineries, off-shore platforms, chemical plants, gas production plants, oil and gas shipping, pharmaceuticals and in whisky distilleries.
|
|
Pressure Indicators
The Vista-Gage is a unique piston-type pressure indicator, specifically designed to withstand machine vibration, shock, pulsation, pressure surges and other rigorous conditions that create problems for conventional pressure gauges, with fragile bourdon tube mechanisms. Available in Vista-Gage for High-pressure, Lo-pressure and Vacuum indicators, Vista-Cator for GO/NO-GO indicators, and Vista-Monitor for Accumulators.
|
|
Digital Pressure Indicator - Series 7200
A portable high accuracy pressure indicator with dual sensor and triple scale.
The Series 7200 is Ruska’s latest, third generation, Precision Pressure Indicator (PPI) which includes several new features, from the large text and graphics display to the easy to use menu.
Features & Benefits:
Ranges from 1 to 2760 bar
Accuracy to 0.01% FS
AC or battery powered operation
Dual display
|
|
PASCAL LAB – P, touch-screen high accuracy pressure digital indicator for lab applications:
- modular configuration: up to 4 internal pressure sensor
- one connector for external sensors
- uncertainty up to 0,01% f.s.
- display touch-screen with 4 variables simultaneously indicated
- huge memory, bi-direction and real-time communication to PC
- large memory storage for the calibration procedures, data and reports
|
|
Features:
- 350ohm Strain Gauge Input
- Scaleable Range
- 2 Configurable Alarms HIGH/LOW/OFF
- AUTO/MANUAL Calibration
- Manual ZERO
- Lockout
- Process Value - RETRANS
|
|
ServiceJunior without yarn.
Little genius of the diagnosis
Description:
- Transmission without yarn of the data.
- Possibility of data acquisition on the long term.
- Digital display with lighting.
- Conceived for remote control.
- Kit containing the JuniorWin software for PC.
- Function selected of peak (posting with bars and function actuated needle).
- Measurement of the points of pressure at rate of 10 ms reading (function max. min/).
- Range 50 m minimum.
- Whole Posting of the scale.
- Simplicity of handling by 4 keys.
- Integrated Battery: lifespan 1.500 hours.
- Index of protector IP54.
- Beach of pressure: -1... 16 bar/0... 100 bar/0... 400 bar/0... 600 bar.
Advantages:
- "Intelligent" Management of the memory.
- Is based on technology without wire, no connection by cable towards the PC is not necessary.
- A faster transfer of the data Allows the PC.
- Direct and simple Connection of ServiceJunior on the hydraulic system.
- No other portable apparatus nor another sensor and cable are necessary.
- Simple Use with lower costs for better results.
- Robust Enclosure not dirtying.
Applications:
- Machine tools
- Mobile Machines
|
|
|
|
see the results for the following category
