|
|
Pitot Tube - Series 160/166/167
Insertion Lengths from 6 to 216 Inches, Designed to Meet AMCA and ASHRAE Code
Ellipsoidal Tip Pitot Tube - Series 160E
Insertion Lengths from 0.2 to 1.52 Meters, Designed to Meet British Standard 1042.
"S" Type Stainless Steel Pitot Tube - Series 160S
Insertion Lengths from 18 to 72 Inches, Designed to Meet EPA Spec. 40 CFR (Ch. 1)
Telescoping Stainless Steel Pitot Tube - Model 166T
Adjustable Insertion Length from 11.5 to 36 Inches
|
|
KIMO offers a wide range of high-quality and accurate Pitot tubes, as per the AFNOR NFX 10-112 and ISO 10780 norms.
Pitot tubes Type L
Accuracy : More than 1 %, for a ± 10 ° alignment to the fluid flow.
Pitot tube with ellipsoidal head. An intake for total pressure and 6 holes for static pressure. Body made of stainless steel.
Pitot tubes Type L with TCK
Accuracy : More than 1 %, for a ± 10 ° alignment to the fluid flow.
Pitot tube with ellipsoidal head. An intake for total pressure and 6 holes for static pressure. Sheated thermocouple K probe integrated, with connection cable length 1,5 m. Body made of stainless steel.
Pitot tubes type S with TCK
Accuracy : More than 4 %, for a ± 15 °alignment to the fluid flow.
Pitot tubes with TIG welding and protective tube made of stainless steel. Sheated thermocouple K probe integrated, with connection cable length 1,5 m. Body made of stainless steel. |
|
The deltaflow pitot is the portable counterpart of the deltaflow DF 25. It is the ideal sampling instrument for performing integrated measurements according to DIN 2640 standards. It possesses the same highly precise profile as the deltaflow DF25 and is used to verify and calibrate existing measurements. The deltaflow pitot is currently in use, for example, in power plants, by measurement teams, and-in the heating and air conditioning industry-to test airflow efficiency, air intake and exhaust, or to test the efficiency of ventilators.
Because the deltaflow pitot can be disassembled, it can be comfortably transported in a carrying case. Its straight construction design allows it to be easily inserted into the sampling cross-section through previously-existing apertures. The sampling profile is extremely impervious to pollution or to the accumulation of condensation. The highly durable stainless steel and the non-sealed design resist temperatures of 1040°C in constant application and can withstand temperatures of up to 1200°C for temporary measurements.
Media: Gasses
Conduit / Channel Diameter: 100..8500mm
Process Requirements: -250..1200 °C / 0..6 bar
ultra-pure through highly polluted, aggressive gasses
Tests / Certifications:
Calibrated at the Department of Flow Technology at the University of Erlangen |
|
Single point Pitot Static Tube
FCO65 FCO65
* Classic Prandtl design for most duct sizes.
* Stainless steel construction
* Suitable for temperatures up to 500 degrees C.
* Optional thermocouple for temperature correction
* Versions for installation or hand-held use
Classical precision design pitot static tube for calibrated air flow measurement in various diameters from 2.1mm to 25mm, and custom built in various lengths to suit your application.
|
|
CHARACTERISTICS
Calibrated insertion diaphragm (concentric orifice) with
identification tag for mounting between flanges with
smooth waterproof surfaces.
The upper face of the entrance orifice plate is square
edged.
The pressure measurement taps are on flange or pipe.
Diaphragm with flanges assembly designed to be
welded to pipe.
APPLICATIONS
• Gases, vapours, corrosive and non corrosive fluids.
SPECIFICATIONS
• Maximum working pressure: Limited to
the flange rating.
• Maximum working temperature: Depends on material
and application.
• Range of Pipeline:
Nominal Diameter: DIN or ASA
Rating: DIN or ASA
• Pressure taps: BSP, NPT, METRIC, etc…
• Flange standard: DIN or ASA.
• Flange and accessories material: Depends on pipe.
• Diaphragm material: See 5.1 ORIFICE PLATE &
RESTRICTION ORIFICE.
• Calculations: BS EN ISO 5167-1, 2003, ASME, API, R W MILLER, L W SPINK.
|
|
• Pitot tubes Type L : pitot tube with ellipsoidal head. An intake for total pressure and 6 holes for static pressure. Body made of stainless steel.
• Pitot tubes Type L with TCK : pitot tube with ellipsoidal head. An intake for total pressure and 6 holes for static pressure. Sheated thermocouple K probe integrated, with connection cable length 1,5 m. Body made of stainless steel.
• Pitot tubes type S with TCK : pitot tubes with TIG welding and protective tube made of stainless steel. Sheated thermocouple K probe integrated, with connection cable length 1,5 m. Body made of stainless steel.
• Air Flow Measuring blades DEBIMO : simple and cost effective method of providing permanent air flow measurement in rectangular or circular ducts. When used with a KIMO differential pressure device (pressure, transmitter, electronic micromanometer, liquid column manometer, differential pressure switch, ...).
DEBIMO air flow measuring blades ensure accurate indication, control or recording of air flow velocity and volume. Permit velocity measurements from 3 to 100 m/s (9 Pa to 10000 Pa). |
|
|
Sandvik Materials Technology is a world leading supplier of seamless heat exchanger tubing in stainless steels and special metals. For critical equipment such as heat exchangers, a high operational reliability is crucial. Our heat exchanger tubes are used in various processing industries, operating under most severe conditions.
|
|
| ... products without technical information |
| |
Hybrid hoses are manufactured by OLMARK using the total integrated technology of all production departments.
Every project is carried out in conformity with Client's drawings or it can be directly put together on board the machine.
Both ways guarantee the numerous advantages of a one go assembly of rigid and flexible hoses: one single code for all the assembly, easy logistical management, lead-time installation reduction, costs savings and simply spare parts management. |
|
Standard profiles represent an important part of the Top Glass product line.
These profiles are available in standard dimensions and colors, and most are in stock, ready for immediate delivery. They are used for a broad variety of applications as semi-finished components in construction, electrical apparatuses, industry and urban fixtures.
A great many of these profiles find application in the production of technical equipment and sports and leisure articles.
|
|
Exel is a leading manufacturer of composite profiles and tubes. We are specialized in customer-tailored solutions but we also have a wide range of standard tubes and profiles available. For any further details, please check our website: www.exelcomposites.net or contact e-mail: profiles@exel.fi
Glass fiber and carbon composites are ideal materials for many application areas because of their superior stiffness, high strength and low weight. Experienced design plus the additional benefits of warm to touch feel of the material and possibility for ergonomic shapes makes Exel composite tubes an unbeatable choice.
Exel has several technologies to produce shaft tubes: Pullwinding, Co-winding and Prepreg wrapping.
Depending on performance requirements we can design the tube structure based on carbon-, glass- or carbon/glass hybrid continuous fibers or fabrics.Exel is a leading manufacturer of composite profiles and tubes. We are specialized in customer-tailored solutions but we also have a wide range of standard tubes and profiles available. For any further details, please check our website: www.exelcomposites.net or contact e-mail: profiles@exel.fi
|
|
|
Sandvik composite tubes consist of two components, metallurgically bonded together. Therefore composite tubes are particularly suitable for applications where the conditions outside and inside the tube require properties that cannot be made by one material. By selecting the correct alloy for each component, the corrosion resistance and the mechanical properties are optimised and a tube that meets conflicting material requirements is obtained.
|
|
| ... products without technical information |
| |
Material: St 37-2; St 52-3 bk
Tol. OD DIN 2393
Tol. WD +/-5%
Tol. ID ISO-Tolerance Field H9-H11
Center Line Average of Interior Surface drawn Ra max. 0.8 µm
Dimensional Range: ID ř8-250 mm
|
|
| ... products without technical information |
| |
|
|
see the results for the following category
