|
|
deltawave Ultrasonic flowmeter
Our new measuring system deltawave is not only a precise flowmeter for open channels,filles and partially filled pipes but also a temperatur meter and a flow profile analysis tool. Due to the unique patent pending signal analysis deltawave works under extreme conditions, maintenance-free, calibration-free and reliably. The measurement system monitors itself continously and the multi-channel property ensures redundant safety. With only one deltawave, you can realize up to four independent measurement sites, significantly reducing the equipment cost. This feature, combined with the high accuracy up to 0.5% makes deltawave to one of the most powerful measuring systems.
Because of the high accuracy, field acceptance tests of hydraulic turbines, storage pumps and pump-turbines are possible due to ISO60041 and ASME PTC 18. Accuracies up to 1% could be achieved in open channels without calibration. In filled pipes or channels you will get an accuracy of 0.5% of reading. But measuring with deltawave do not means only accuracy. The optimized transducers ensures long-term stable measuring without maintenance. This has been proven successfully by public authorities.
|
|
deltawave - Ultrasonic multimeter for fluids
Our new measuring system deltawave is not only a precise flowmeter for open channels,filles and partially filled pipes but also a temperatur meter and a flow profile analysis tool. Due to the unique patent pending signal analysis deltawave works under extreme conditions, maintenance-free, calibration-free and reliably. The measurement system monitors itself continously and the multi-channel property ensures redundant safety. With only one deltawave, you can realize up to four independent measurement sites, significantly reducing the equipment cost. This feature, combined with the high accuracy up to 0.5% makes deltawave to one of the most powerful measuring systems.
Because of the high accuracy, field acceptance tests of hydraulic turbines, storage pumps and pump-turbines are possible due to ISO60041 and ASME PTC 18. Accuracies up to 1% could be achieved in open channels without calibration. In filled pipes or channels you will get an accuracy of 0.5% of reading. But measuring with deltawave do not means only accuracy. The optimized transducers ensures long-term stable measuring without maintenance. This has been proven successfully by public authorities.
|
|
Wetted ultrasonic flowmeters
The SITRANS F US wetted ultrasonic flowmeters are used to measure electrically conductive and non-conductive liquids that are acoustically permeable. They come in sensor sizes from DN 50 to 1200 (2" to 48") and as wetted retrofit flowmeters up to DN 4000 (160").
The program offers the possibility of comprehensive self-diagnostic capabilities for error indication and logging, the possibility to exchange of the transducers without interrupting operation, HART and PROFIBUS PA communication, custody transfer and ATEX approvals.
|
|
SITRANS FUS1020 offers reliable flow-measurement at a much lower cost than other clamp-on ultrasonic flowmeters, with flow rate accuracy of 1% or better for most applications. Available in single or dual channel configurations, in IP65 (NEMA 4).
|
|
...for flow, level, pressure, analysis and temperature
Sensors, transmitters and fittings for measuring and controlling of fluid or gaseous media.
Bürkert....the Smart choice for Fluid Control System ! |
|
Electro magnetic flow meter
DN 10, 15, 20, 25, 32, 40
sanitary connection acc. to DIN 11851
aseptic connection acc. to DIN 11864-1 with 3A approval
Tri Clamp acc. to DIN 32676 with 3A approval
Tri Clamp acc. DIN 11864-3 with 3A approval
filling quantum from 1 ml
CIP/SIP-procedures up to 140°C
product conductivity >1µS
power supply 24 VAC
|
|
Calorimetr. Flow Monitor KAL-D
Calorimetric Flow Monitor KAL
Calorimetric Flowmeter /- monitors KAL-K
Calorimetric Flow Monitor f. Gases KAL-L
Calorimetric Flowmeter,-switch,-totalizer DVK
Differential Pressure Flowmeter RCD
Mass Flowmeter and /-controller for Gases MAS
Mass Flowmeter and /-regulator for Gases DMS
Mass Flowmeter for Gases MFC
Mass Flowmeter and /-regulator for Gases DMW
Therm. Mass Flowmeter for Gases KES
Mass Flowmeter and Counter PMS
Magnetic Inductive Flowmeter / -monitor PME
Magnetic Inductive Flowmeter/-monitor/-counter DMI
Magnetic Inductive Flowmeter/-monitor MID
Magnetic Inductive Flowmeter/-monitor PMG/PMH
Oscillation Flow Meters DOG
Ultrasonic Flowmeter DUB
Ultrasonic Flowmeter/-counter DUL
Vortex-Flowmeter,-switch DVZ
Vortex Flowmeter PWL |
|
Suitable for harsh environments and more sophisticated outputs either ABS or Aluminium.
Features:
- Easy to set (MENU);
- Analogue output 4-20 mA;
- RS 485 output (insulated);
- Pulse and alarm ON/OFF output;
- Bi-directional flowrate reading;
- Measurement frequency 10/20 Hz;
- Metric system (SI, UK, US);
- Input for connection of TRM 100 programmer;
- Power supply: 90...264 Vac 50-60 Hz or 24 Vac/dc 50-60 Hz;
- Keyboard;
- 2 lines 16 characters display;
- Batching function; batching alarm
- Low consumption operating mode;
- Empty pipe alarm (*);
- Alarm min and max flowrate;
- Alarm full scale change and reverse flow;
- Modbus protocol (*) ;
- Digital input for totalizer remote reset or batching start/stop; |
|
Applications:
Volume flow measurement
Flow measurement of conductive liquids
Special features:
Reliability
Different materials for electrodes (e. g. Hastelloy, Platinum, Tantalum, Gold, and many more.)
Tailor made solutions.
Transmitter UMF (to be used in hazardous areas)
Transmitter UMF2
|
|
FLUXUS® ADM 8027 is an ultrasonic flowmeter with IP66 enclosure for permanent installation in explosion-hazardous areas. It is ATEX certified for use in explosion hazard zones 1 and 2. All electronic components are in a flameproof enclosure. Terminals and terminal boxes are designed in protection type "increased safety".
|
|
SITRANS FUG1010 clamp-on non-intrusive ultrasonic flowmeter is ideal for natural and process gas applications, including checkmetering, allocation, production, storage and gas fired power station applications. The meter is available in single, dual and optional four beam configurations, with your choice of IP65 (NEMA 4X) or IP65 (NEMA 7) and IP66 (NEMA 7) explosion proof enclosures.
|
|
The FLUXUS ADM 6725 is a portable ultrasonic flowmeter. With its clamp-on transducers and its rechargeable battery, it is an ideal tool for service work.
The clamp-on flow transducers are simply mounted onto the pipe from the outside. Measurement is therefore non-invasive, and no process interruption is necessary for the installation. The transducers are not in direct contact with the medium to be measured and thus in no way submitted to pressure and wear and tear.
All transducer pairs are factory calibrated. All calibration data (including the transducer identification and parameters) is stored permanently in the transducers and is transferred to the transmitter automatically upon connection. This facilitates operation and a zeroing procedure is not necessary.
The user interface is adapted to the detected transducers. The instruments simply asks in a logical sequence for the pipe and medium parameters. The physical properties of a large number of pipe materials and media are stored in an internal data base. The status display enables even the inexperienced user to judge online the quality and precision of the measurement.
|
|
| The Preso ThermoTrack is a non-invasive ultrasonic flow meter combined with non-invasive temperature sensors, to measure energy use in water-based HVAC systems. No sensors come in contact with the liquid and there are no moving parts, so downtime and maintenance are eliminated. The flow meter utilizes transit time ultrasonic technology and the temperature sensors are Pt1000 RTDs. The flow rate, supply line temperature and return line temperature measurements provide the necessary inputs to calculate energy use, displayed in BTUs, Calories or Watts. The ThermoTrack is available for pipe sizes 1/2" (12 mm) and larger, with a variety of power supply and output options available. |
|
SITRANS FUS1010 is the most versatile clamp-on ultrasonic flowmeter available today. It can operate in either WideBeam Transit-Time or Reflexor (Doppler) mode, making it suitable for virtually any liquid, even those with high aeration or suspended solids. The meter is available in single, dual channel/dual path and optional four channel/four path configurations. You have a choice of IP65 (NEMA 4X), IP65 (NEMA7) and IP66 (NEMA 7) wall mount enclosures.
|
|
MINISONIC P is the new portable flowmeter of Ultraflux. Sturdy, light (850g) and water ingress protected, it is a real practical tool which warranties you quick, sure, accurate and bidirectional flow measurements of liquids. MINISONIC P is associated with clamp-on probes. These probes are easy to install without shut down of the process and no pressure drop.
MINISONIC P main advantages :
- large range of diamters : from 10 mm
- New measurement technology "ESC" (or Echo Shape Control) an ultrasonic signal auto-focus,
- 40 hours battery life
- very high amplification dynamic (89dB) and very efficient sounds immunity in difficult condition of measurement.
- an ergonomic keypad and menu calibration, back-lighted display
- measurement resolution < 0.1 ns
The measurement operating system software on PC allows the capture and the edition of the results |
|
SITRANS FUH1010 clamp-on non-intrusive ultrasonic flowmeter is ideal for applications carrying crude oil, refined petroleum or liquefied gas. The meter has three application areas: Interface detectors, volumetric flowmeters and mass or standard volume flowmeters. Available in single, dual and optional four beam configurations, with choice of IP65 (NEMA 4X) or IP65 (NEMA 7) and IP66 (NEMA 7) wall mount enclosures.
|
|
Portaflow-X
This ultrasonic portable flowmeter consists of two sensors clamped on the pipe (DN 13 to 6000 mm, according to sensors) and of a digital converter operating on internal battery or on power line. It can measure bi-directional flow speeds from -32 to +32 m/s.
A large LCD graphic screen, a set of pop-up menus and a reduced number of keys make of this device a simple, powerful and friendly tool very appreciated by every person wishing to do a punctual measure of flow.
In addition to the display of flow and totalization, the PORTAFLOW-X also offers functions of data logging (40000 values), of graphic display of the measured value and of the resultant sound wave, and the storage in memory of 1 to 20 configurations.
A RS232C interface allows the connection to a PC computer. An optional graphic printer is available.
|
|
The FLUXUS ADM 6725 is a portable ultrasonic flowmeter. With its clamp-on transducers and its rechargeable battery, it is an ideal tool for service work.
The clamp-on flow transducers are simply mounted onto the pipe from the outside. Measurement is therefore non-invasive, and no process interruption is necessary for the installation. The transducers are not in direct contact with the medium to be measured and thus in no way submitted to pressure and wear and tear.
All transducer pairs are factory calibrated. All calibration data (including the transducer identification and parameters) is stored permanently in the transducers and is transferred to the transmitter automatically upon connection. This facilitates operation and a zeroing procedure is not necessary.
The user interface is adapted to the detected transducers. The instruments simply asks in a logical sequence for the pipe and medium parameters. The physical properties of a large number of pipe materials and media are stored in an internal data base. The status display enables even the inexperienced user to judge online the quality and precision of the measurement.
|
|
The FLUXUS ADM 6725 is a portable ultrasonic flowmeter. With its clamp-on transducers and its rechargeable battery, it is an ideal tool for service work.
The clamp-on flow transducers are simply mounted onto the pipe from the outside. Measurement is therefore non-invasive, and no process interruption is necessary for the installation. The transducers are not in direct contact with the medium to be measured and thus in no way submitted to pressure and wear and tear.
All transducer pairs are factory calibrated. All calibration data (including the transducer identification and parameters) is stored permanently in the transducers and is transferred to the transmitter automatically upon connection. This facilitates operation and a zeroing procedure is not necessary.
The user interface is adapted to the detected transducers. The instruments simply asks in a logical sequence for the pipe and medium parameters. The physical properties of a large number of pipe materials and media are stored in an internal data base. The status display enables even the inexperienced user to judge online the quality and precision of the measurement.
|
|
SITRANS FUP1010 clamp-on non-intrusive ultrasonic flowmeter offers maximum versatility plus battery power for portable field use. It can operate in either WideBeam Transit-Time or reflexor (Doppler) mode, making it suitable for virtually any liquid, even those with high aeration or suspended solids. The meter is available in single and dual channel or dual path configurations, with your choice of IP67 waterproof or IP40 (NEMA 1) enclosures.
|
|
To carry out accurate measurements and rather than having to bore your pipes and being limited in control points, think ultrasounds and clamp-on probes : Think ULTRAFLUX !
The DigiSonic E is a portable flowmeter. It is designed for field operations. Measurements are immediate and presented in both graphic and alpha-numeric formats.
Its sensitivity and its accuracy on any size of pipe make it an outstanding portable device. Let's also mention the following original features : memory and display capacities, thickness and temperature measurements.
|
|
The Heat Calculator Option of FLEXIM's non invasive FLUXUS ADM flow meter allows the easy determination of the energy flow in a system.
With temperature measurements made at the inlet and at the outlet of a system as well as flow measurement at the outlet , FLUXUS calculates the Heat Flow or energy usage within that system. All this is done with temperature and flow measurement devices mounted on the outside of a pipe.
FLUXUS will display the actual heat flow through the system, and if needed, totalize the heat flow in order to obtain the heat quantity.
The values can easily be transmitted to a PC for display and analysis. The data obtained can be used for energy flow balancing or it can be transmitted to a process control system.
|
|
Hot Tap provides accurate flow rate measurement in full and pressurized pipe applications in pipes 18" (460 mm) diameter or larger.
Hot Tap combines ADFM pulse Doppler velocity profiling technology with a unique sensor assembly suitable for insertion into full, operating 18” and larger diameter pipes. It measures flow rate to within ±2% of actual flow rate, even in difficult applications such as installations near bends, short straight runs, near pumps, etc. Applications include:
• Wastewater collection systems
• Combined sewer systems
• Wastewater treatment facilities
• Irrigation canals and channels
• Industrial process
• Stormwater outfalls |
|
Applications: flow measurement of industrial gases, natural gas, compressed air, ventilation...
Ultrasonic probes can be put on a spoll or installed under pressure without any break in the process. 2 equipment are available.
MINISONIC G measurement can be single or dual chord. UF 322 G-MC allows 6 speed integrations for the best accuracy even in difficult conditions such as weak hydraulic conditions.
ATEX equipment |
|
The solution for extreme temperatures
The WaveInjector® enables flow measurement at both very low and very high temperatures (400°C), even in explosion-hazard areas. It offers you the well known advantage of the clamp-on ultrasonic technology: a non-invasive, pressure and medium independant measurement with a high dynamic range and a high flexibility.
No special transducers are needed for the high-temperature measurement. The standard transducers are simply fixed to the WaveInjector®. For very large pipes, a special WaveInjector® version with chains guarantees a robust fixation on the pipe and a high surface pressure on the coupling point.
|
|
Time DELTA
This ultrasonic fixed type flowmeter consists of two sensors clamped on the pipe (DN 50 to 6000 mm, according to sensors) and of a digital converter, remote mounted. It can measure bi-directional flow speeds from -32 to +32 m/s. A display and an integrated keyboard allow the user to configure and to check all the settings.
In addition to the 4-20 mA output, the Time Delta is equipped with a totalization function, an automatic range change, 2 alarms and 2 configurable contact outputs. The converter and the sensors have IP67 protection.
|
|
The FLUXUS ® ADM 5107 ultrasonic flowmeter for permanent installation was designed for the water- and wastewater industry.
The watertight transducers are small and practical, fast to install They are watertight and equipped with fixed transducer wiring. On request, the instrument can be pre-configured at the factory so as to reduce commissioning work to a minimum. Thanks to the clamp-on technology, no cutting or welding work is needed to mount the transducers on the pipe.
|
|
Easy to install and without maintenance, MINISONIC flowmeters are mostly associated to clamp-on probes suitable for most pipes from 10 mm to 3.3 m and any kind of fluids transparent to ultrasounds (water, oil, acids alkali's, refrigerants and other aggressive applications).
Thanks to their exclusive technology ESC (Echo Shape Control), an auto-focus for ultrasounds, these flowmeters are accurate and reliable. Fixed versions with standard or explosion proof models for hazardous area (ATEX certification) and portable versions are available.
Our MINISONIC ultrasonic flowmeters range is being extended with dual-pipe versions for a measurement of two simultaneous flows and with dual-chord systems to compensate for hydraulic disturbances (poor flow conditions).
You also benefit of enhanced resources to solve your standard but also your atypical applications, among which : a 89 dB amplification dynamic, a permanent signal checking, an 0.1 nanosecond accuracy on time measurements, an accurate auto-zero…
|
|
|
