|
|
Whatever your process or system requirements, there is a flowmeter to suit your needs from the Spirax Sarco range. Our
flowmeters have an unrivalled reputation for accuracy, turndown and reliability. They are versatile, being suitable for steam
as well as most liquids and gases. A comprehensive selection of flow computers and display units, all of which can be
linked to plant and building management systems, complement the range. |
|
Wetted ultrasonic flowmeters
The SITRANS F US wetted ultrasonic flowmeters are used to measure electrically conductive and non-conductive liquids that are acoustically permeable. They come in sensor sizes from DN 50 to 1200 (2" to 48") and as wetted retrofit flowmeters up to DN 4000 (160").
The program offers the possibility of comprehensive self-diagnostic capabilities for error indication and logging, the possibility to exchange of the transducers without interrupting operation, HART and PROFIBUS PA communication, custody transfer and ATEX approvals.
|
|
Available Temperature Range: -400°F to +350°F
continuous (to +400°F intermittent heat).
End Fittings: MS flared and flanged styles are
recommended. Other types available on request.
Bearing Styles: Ceramic hybrid ball bearings sizes 1¼”
through 12”. Stainless steel ball bearings sizes ¼” through
1”.
Materials: 316 stainless steel standard. Consult with
applications group for corrosive applications. Broad material
list available.
*** Linearity is density-dependent for a given meter.
Consult factory for details. |
|
OMNI - F
The calorimetric principle of flow monitoring is based on two temperature sensors. One of these sensors is hearted constantly so that there is a constant difference in temperature between the two temperature sensors when the metering material is at a standstill
calorimetric
nominal diameter from DN 10
Ranges 1-150 cm/s
Pressure range PN 200
Temperature max. 70 °C
Stainless steel material |
|
Calorimetr. Flow Monitor KAL-D
Calorimetric Flow Monitor KAL
Calorimetric Flowmeter /- monitors KAL-K
Calorimetric Flow Monitor f. Gases KAL-L
Calorimetric Flowmeter,-switch,-totalizer DVK
Differential Pressure Flowmeter RCD
Mass Flowmeter and /-controller for Gases MAS
Mass Flowmeter and /-regulator for Gases DMS
Mass Flowmeter for Gases MFC
Mass Flowmeter and /-regulator for Gases DMW
Therm. Mass Flowmeter for Gases KES
Mass Flowmeter and Counter PMS
Magnetic Inductive Flowmeter / -monitor PME
Magnetic Inductive Flowmeter/-monitor/-counter DMI
Magnetic Inductive Flowmeter/-monitor MID
Magnetic Inductive Flowmeter/-monitor PMG/PMH
Oscillation Flow Meters DOG
Ultrasonic Flowmeter DUB
Ultrasonic Flowmeter/-counter DUL
Vortex-Flowmeter,-switch DVZ
Vortex Flowmeter PWL
Universal Bussystem KOBUS |
|
Advanced Ceramic Technology is a recent term that
refers to a wide range of materials, which are
generally obtained from partition of inorganic raw
material –metal oxides-, and selected with a high
grade of purity. These materials are submitted to
shaping techniques of the powder metallurgy with a
following very high temperature sintering process
that leads to dense components, which high technical
performances offer a wide range of applications.
Thanks to their excellent properties, the Advanced
Ceramic Technology can be used in the making of
primary flow elements – with APLITEX as a pioneer.
At the present time, they are a key element in
processes that require:
• Extreme solidity.
• Stability at high temperatures.
• High resistance to corrosion.
• High resistance to chemical attacks.
• High resistance to vacuum.
• Long life. |
|
SITRANS FUS1020 offers reliable flow-measurement at a much lower cost than other clamp-on ultrasonic flowmeters, with flow rate accuracy of 1% or better for most applications. Available in single or dual channel configurations, in IP65 (NEMA 4).
|
|
| The Preso COIN (segmented wedge) DP flow meter accurately measures flow in almost any application. The COIN is suitable for high viscosity fluids, corrosive and abrasive fluids, extreme temperatures such as cryogenic, slurries and other dirty fluids, as well as air, gas and steam. The COIN may also be calibrated for multi-phase applications. Typical accuracies are +/- 3% (uncalibrated) and +/- 0.5% (calibrated), with repeatability of 0.2% of reading and 10:1 turndown ratio. The Preso COIN meter is available in pipe sizes from 0.5" (12 mm) to 48" (1219 mm) and larger. |
|
Electro magnetic flow meter
DN 10, 15, 20, 25, 32, 40
sanitary connection acc. to DIN 11851
aseptic connection acc. to DIN 11864-1 with 3A approval
Tri Clamp acc. to DIN 32676 with 3A approval
Tri Clamp acc. DIN 11864-3 with 3A approval
filling quantum from 1 ml
CIP/SIP-procedures up to 140°C
product conductivity >1µS
power supply 24 VAC
|
|
Calorimetr. Flow Monitor KAL-D
Calorimetric Flow Monitor KAL
Calorimetric Flowmeter /- monitors KAL-K
Calorimetric Flow Monitor f. Gases KAL-L
Calorimetric Flowmeter,-switch,-totalizer DVK
Differential Pressure Flowmeter RCD
Mass Flowmeter and /-controller for Gases MAS
Mass Flowmeter and /-regulator for Gases DMS
Mass Flowmeter for Gases MFC
Mass Flowmeter and /-regulator for Gases DMW
Therm. Mass Flowmeter for Gases KES
Mass Flowmeter and Counter PMS
Magnetic Inductive Flowmeter / -monitor PME
Magnetic Inductive Flowmeter/-monitor/-counter DMI
Magnetic Inductive Flowmeter/-monitor MID
Magnetic Inductive Flowmeter/-monitor PMG/PMH
Oscillation Flow Meters DOG
Ultrasonic Flowmeter DUB
Ultrasonic Flowmeter/-counter DUL
Vortex-Flowmeter,-switch DVZ
Vortex Flowmeter PWL |
|
Suitable for harsh environments and more sophisticated outputs either ABS or Aluminium.
Features:
- Easy to set (MENU);
- Analogue output 4-20 mA;
- RS 485 output (insulated);
- Pulse and alarm ON/OFF output;
- Bi-directional flowrate reading;
- Measurement frequency 10/20 Hz;
- Metric system (SI, UK, US);
- Input for connection of TRM 100 programmer;
- Power supply: 90...264 Vac 50-60 Hz or 24 Vac/dc 50-60 Hz;
- Keyboard;
- 2 lines 16 characters display;
- Batching function; batching alarm
- Low consumption operating mode;
- Empty pipe alarm (*);
- Alarm min and max flowrate;
- Alarm full scale change and reverse flow;
- Modbus protocol (*) ;
- Digital input for totalizer remote reset or batching start/stop; |
|
Applications:
Volume flow measurement
Flow measurement of conductive liquids
Special features:
Reliability
Different materials for electrodes (e. g. Hastelloy, Platinum, Tantalum, Gold, and many more.)
Tailor made solutions.
Transmitter UMF (to be used in hazardous areas)
Transmitter UMF2
|
|
The electronic oval gear meters for product delivery control and measurement are used in the private distribution of low, medium and high viscosity fluids such as fuel, lubrication oil and other special fluids compatible with the construction materials. The oval gear measuring principle adopted offers high precision and low pressure losses together with a compact lightweight design and easy installation.
An electronic card with microprocessor permits control of the display and calibration of the meter. A complete range of models is designed to satisfy all flow rate requirements.
Ease of use, compactness and the independent battery power supply make these products suitable for installation in both stationary systems on fluid transfer and distribution lines and in mobile applications as an accessory for delivery valves and guns and for all other industrial applications that require fluid delivery control.
Performance
- Precision ± 0.5 % in flow rate range
after calibration
- Repeatibility 0.2%
- Pressure loss < 0.5 bars (7 psi) at max flow rate |
|
FLUXUS® ADM 8027 is an ultrasonic flowmeter with IP66 enclosure for permanent installation in explosion-hazardous areas. It is ATEX certified for use in explosion hazard zones 1 and 2. All electronic components are in a flameproof enclosure. Terminals and terminal boxes are designed in protection type "increased safety".
|
|
2150EX Flow Meter for Zone 0 locations
Area Velocity meter - Baseefa approved as ATEX Group II, Category 1G
The 2150EX is an intrinsically safe Area Velocity Flow Meter that is specifically designed and Baseefa-approved for use in Zone 0 and Zone 1 potentially explosive atmospheres under ATEX Directive 94/9/EC.
The AV 2150EX smart Area Velocity probe is built on digital electronics, so the analog level is digitized in the sensor itself. The probe is also factory-calibrated for 3 meter span at different temperatures. This superior built-in calibration eliminates temperature drift in the level signal, providing long-term level stability that reduces recalibration frequency and completely eliminates span recalibration.
The 2150EX is powered by two lithium or rechargeable lead acid battery packs, or by the 2194EX network interface module. Highly efficient power management provides battery life up to 8 months with two-minute data storage interval. |
|
...for flow, level, pressure, analysis and temperature
Sensors, transmitters and fittings for measuring and controlling of fluid or gaseous media.
Bürkert....the Smart choice for Fluid Control System ! |
|
Metal Magmeter Flow Sensor (Signet 2552)
Plastic Magmeter Flow Sensor (Signet 2551)
Flow Wet-Tap Valve (Signet 3519)
Metal Paddlewheel Flow Sensors (Signet 525, 2517, 2540)
Plastic Paddlewheel Flow Sensors (Signet 515, 2536, 2537)
Ultrasonic Flow Sensor
Vortex Flow Sensors (Signet 7000/7001)
In-Line Rotor/Flow-Through Sensors (Signet 2000, 2100, 2507) |
|
| Hedland offers over 7,000 variable area, turbine, and positive displacement meters for liquids and gases. The in-line variable area meters can be installed at any angle and perform at ±2% accuracy. High pressure/high temperature models available. The Flo-tech line of portable hydraulic testers is designed for diagnostic troubleshooting of hydraulic systems and components. The Flo-tech line includes turbine flow sensors with magnetic pickup, ported for optional pressure and temperature transducers. |
|
|
|
