|
|
|
New in the range of the exchangers air/oil LDC for capacities of cooling up to 130 kw with a delta of 40°C These heat exchangers OILTECH have electric motor with D.C. current LDC.
|
|
AIR-OIL HEAT EXCHANGERS WITH ALTERNATING CURRENT ELECTRIC FANS - SERIE AP:
Today the use of air in hydraulic equipment is more and more common.
The benefits are: No water supply required Totally independent of plummed systems Reduced running costs in comparison with the water-oil exchangers, even if initial investment is higher
Residual warm air can be used for heating
With air-oil heat exchangers the radiator unit is of aluminium for minimum conduction.
|
|
HA Serie:
Standard air-oil combined two-circuit heat exchangers used for cooling compressors from 7.5 to 160 kW. Radiator in aluminium alloy, vacuum braze welded, with high-efficiency turbulators on the air side. Power supply of fan only in AC, blowing ventilation.
|
|
SELF-CONTAINED COOLING UNITS:
The RAS cooling units were engineered and manufactured to substitute the former GAR and OCS series with an uncomplicated and compact product. The units are made up of an aluminium air-oil exchanger and a single electric motor which operates both the oil circulation gear pump and the cooling fan.
|
|
DIRECT CURRENT AIR-OIL HEAT EXCHANGERS:
This series of heat exchangers is particularly useful in cooling oleo-hydraulic plant on mobile machinery as it is fitted with direct current 12 or 24 V electric fans. The cooling element is in aluminium, a material of high thermal conductivity, which provides high thermal yield from relatively contained dimensions. The particular conformation of the radiant block is such that APL series heat exchangers are highly resistant to the stress produced by hammering which, however, at peak value, should not exceed the maximum dynamic pressure of 20 bar. The maximum permitted static pressure is 35 bar.
|
|
HM Serie:
Air-oil heat exchanger with tank and filter, used for the cooling of hydrostatic transmissions, especially on cement trucks and concrete machines. Power supply voltage of intake fan exclusively 24 V DC.
|
|
AIR-OIL HEAT EXCHANGERS -SERIES AP WITH HYDRAULIC MOTOR :
This type of exchanger has been designed for use on movable machines where battery feed is insufficient or when exchangers with direct current supply are inadequate to produce high thermic yields. The radiative unit is of aluminium because this material is a very good conductor; providing high thermic yields and relatively compact over-all dimensions. Thanks to the particular construction of the radiative unit the exchangers of the series APL cope well with water hammer conditions which, at peak values, must not exceed the minimum allowable dynamic pressure of 20 bar. The maximum allowable static pressure is of 35 bar.
|
|
Oil/air heat exchangers
type LKI-HYD
Low noise level
High performance
Low cost
With this new generation of Universal Hydraulik LKI oil-coolers, the manufacturers have succeeded in reducing the noise level. These coolers are ideally suited for mobile installations - for the cooling of hydraulic or lubricating oils.
|
|
Air oil cooler with hydraulic motor and industrial hydraulic systems
An air oil cooler fitted with a hydraulic motor for heavy duty applications with high cooling requirement. The Oiltech LHC air oil coolers are designed for industrial as well as mobile applications. Maximum cooling capacity 130KW at ETD 40°C
|
|
|
New in the range of the exchangers air/oil LDC for capacities of cooling up to 130 kw with a delta of 40°C These heat exchangers OILTECH have electric motor with D.C. current LDC.
|
|
AIR-OIL HEAT EXCHANGERS WITH ALTERNATING CURRENT ELECTRIC FANS - SERIE AP:
Today the use of air in hydraulic equipment is more and more common.
The benefits are: No water supply required Totally independent of plummed systems Reduced running costs in comparison with the water-oil exchangers, even if initial investment is higher
Residual warm air can be used for heating
With air-oil heat exchangers the radiator unit is of aluminium for minimum conduction.
|
|
HA Serie:
Standard air-oil combined two-circuit heat exchangers used for cooling compressors from 7.5 to 160 kW. Radiator in aluminium alloy, vacuum braze welded, with high-efficiency turbulators on the air side. Power supply of fan only in AC, blowing ventilation.
|
|
SELF-CONTAINED COOLING UNITS:
The RAS cooling units were engineered and manufactured to substitute the former GAR and OCS series with an uncomplicated and compact product. The units are made up of an aluminium air-oil exchanger and a single electric motor which operates both the oil circulation gear pump and the cooling fan.
|
|
DIRECT CURRENT AIR-OIL HEAT EXCHANGERS:
This series of heat exchangers is particularly useful in cooling oleo-hydraulic plant on mobile machinery as it is fitted with direct current 12 or 24 V electric fans. The cooling element is in aluminium, a material of high thermal conductivity, which provides high thermal yield from relatively contained dimensions. The particular conformation of the radiant block is such that APL series heat exchangers are highly resistant to the stress produced by hammering which, however, at peak value, should not exceed the maximum dynamic pressure of 20 bar. The maximum permitted static pressure is 35 bar.
|
|
HM Serie:
Air-oil heat exchanger with tank and filter, used for the cooling of hydrostatic transmissions, especially on cement trucks and concrete machines. Power supply voltage of intake fan exclusively 24 V DC.
|
|
AIR-OIL HEAT EXCHANGERS -SERIES AP WITH HYDRAULIC MOTOR :
This type of exchanger has been designed for use on movable machines where battery feed is insufficient or when exchangers with direct current supply are inadequate to produce high thermic yields. The radiative unit is of aluminium because this material is a very good conductor; providing high thermic yields and relatively compact over-all dimensions. Thanks to the particular construction of the radiative unit the exchangers of the series APL cope well with water hammer conditions which, at peak values, must not exceed the minimum allowable dynamic pressure of 20 bar. The maximum allowable static pressure is of 35 bar.
|
|
Oil/air heat exchangers
type LKI-HYD
Low noise level
High performance
Low cost
With this new generation of Universal Hydraulik LKI oil-coolers, the manufacturers have succeeded in reducing the noise level. These coolers are ideally suited for mobile installations - for the cooling of hydraulic or lubricating oils.
|
|
Air oil cooler with hydraulic motor and industrial hydraulic systems
An air oil cooler fitted with a hydraulic motor for heavy duty applications with high cooling requirement. The Oiltech LHC air oil coolers are designed for industrial as well as mobile applications. Maximum cooling capacity 130KW at ETD 40°C
|
|
| ... products without technical information |
| |
... see all the products in the category
Axial fans
|
| ... products without technical information |
| |
|
|
