|
|
Advantages:
- Easy-fit basic frame
- Slim
- Easy connections
- Certain models may be delivered contained in a housing
- A wide range of options
Range :
- Several models and one range available on request
- Air flow rates: 500 to 80,000 m³/h
- BSH EC: Standardised coil in the SILENTHERME range, air flow rates: 1,000 to 10,000 m³/h
Use :
Circulates a fluid to warm or cool the air in commercial, industrial or healthcare facilities. May be ducted.
Description :
- Galvanised steel frame
- Various tube and fin types available
- Connections: tapped couplings with air bleed valves or smooth tubes
- A wide range of options
Features :
- Conception et dimensions et figées
- Nombreux modèles en stock
- Débit d'air de 200 à 80 000 m3/h
- Disposition verticale ou horizontale
|
|
The unit involves an exchange between 2 fluids: a primary fluid in the tubes (water or gas) and a secondary fluid on the fins side (air or gas).
This exchanger offers many options in terms of materials and construction: dimensions, type and materials used in the tubes, fins, etc.
|
|
Heating & Cooling coils
Thermofin’s MP and UG heat exchangers are custom made to meet your needs. By optimizing the mechanical and thermal design in accordance with your specific requirements, Thermofin’s team of enfineers and designers will insure you get the right equipment for the job.
|
|
Steam coils
Based on its vast experience in steam equipment and systems, Thermofin has developed its own steam coil design and selection software. Our control of the construction process, from design to fabrication enables Thermofin to offer the end user a variety of materials and arrangements, making our range of steam coils as diverse as your applications. Therefore, whether the steam is in vacuum or at high pressure, there is always a Thermofin steam coil that will satisfy your needs.
|
|
GEOMETRIES
Thermokey’s concept is to satisfy any type of application. A broad array of geometries are therefore available:
- 25x21,65mm with 3/8” or 5/16” tube
- 30x25,98mm with ½” or 3/8” tube
- 50x43,3mm with ½” or 5/8” tube
- 42x36,4mm with ½” or 5/8” tube
FINS
The fins can be supplied in aluminium, copper, tinned copper, prepainted aluminium, double coated or in stainless steel AISI 304; they are provided of spacing rings, these guarantee a perfect fin spacing and contact with the expanded tubes. A special high efficiency corrugated fin is used for a higher performance if compared to normal corrugated fins; a special extra high efficiency louvered fin is also available.
|
|
GEOMETRIES
Thermokey’s concept is to satisfy any type of application. A broad array of geometries are therefore available:
- 25x21,65mm with 3/8” or 5/16” tube
- 30x25,98mm with ½” or 3/8” tube
- 50x43,3mm with ½” or 5/8” tube
- 42x36,4mm with ½” or 5/8” tube
|
|
| ... products without technical information |
| |
Thalassa fan convector are reversible heating and air conditioning.
The offered range includes 4 models and 5 sizes, with powers from 5 kW cold production and 11 kW hot production.
Since there is poor residual pressure with this equipment (20 Pa), they are used preferably for direct blowing either hanging or wall mounted, with or without casing.
Easily integrated in any type of premises due to its discrete presentation and RAL 9010 epoxy painted frame.
Aircalo offers a wide scope of flow control customization.
|
|
|
|
|
|
Major 2
The Major 2 fan coil unit is designed to be mounted vertically on a wall or horizontally below ceilings to heat and cool homes, businesses and industrial and healthcare facilities. Not only does it combine the economic benefits of installing and operating a central boiler and chiller plant, it also allows individual temperature control in all rooms.
Available in six sizes and two models:
- CH: horizontal cased,
- CV: vertical cased.
Heating capacity: 2 to 20 kW
Cooling capacity: 0.6 to 8 kW
Air flow rates: 115 to 1300 m³/h
- Polymer casing with solid RAL 9010 finish,
- Two access doors lead to air bleed valve and control terminal,
- Water coil: two or four tubes or two tubes and electric heater,
- Condensate drain pan,
- Seven-speed motor (three factory-wired speeds) with balanced, double-inlet aluminium blower wheel,
- Mounting bracket frame,
- Regenerative polyester fibre filter. Efficiency class: G3 (EN 779),
- Fully enclosed electrical junction box,
- A wide selection of control options.
|
|
Floor Standing Type
This space-saving design with a slim shape and smart vent line offers the least obstruction to the surrounding area.
* The unit can be easily installed on the floor along the wall or under the window. Maintenance is simple.
* This type can be hung on the wall for easier cleaning.
|
|
Terminal air heater
"Drawer-type" heaters, which are designed to be installed directly in an opening made in the duct, are built around stored elements. They are bent upon request and can be delivered in small series in a week.
For ducts diameter from 100 to 630 mm and rated from 500 W to 36 kW, the terminal heaters for circular ducts are assembled using elements kept in stock. They may be delivered in small series within 48 hours.
A series of self-controlled circular terminal heaters was developed to satisfy the desire of users for precise temperature control in each room. They can be controlled by electronic thermostats or remote industrial controllers. Many safety accessories are optionally available.
|
|
| ... products without technical information |
| |
Thalassa fan convector are reversible heating and air conditioning.
The offered range includes 4 models and 5 sizes, with powers from 5 kW cold production and 11 kW hot production.
Since there is poor residual pressure with this equipment (20 Pa), they are used preferably for direct blowing either hanging or wall mounted, with or without casing.
Easily integrated in any type of premises due to its discrete presentation and RAL 9010 epoxy painted frame.
Aircalo offers a wide scope of flow control customization.
|
|
|
|
|
|
Major 2
The Major 2 fan coil unit is designed to be mounted vertically on a wall or horizontally below ceilings to heat and cool homes, businesses and industrial and healthcare facilities. Not only does it combine the economic benefits of installing and operating a central boiler and chiller plant, it also allows individual temperature control in all rooms.
Available in six sizes and two models:
- CH: horizontal cased,
- CV: vertical cased.
Heating capacity: 2 to 20 kW
Cooling capacity: 0.6 to 8 kW
Air flow rates: 115 to 1300 m³/h
- Polymer casing with solid RAL 9010 finish,
- Two access doors lead to air bleed valve and control terminal,
- Water coil: two or four tubes or two tubes and electric heater,
- Condensate drain pan,
- Seven-speed motor (three factory-wired speeds) with balanced, double-inlet aluminium blower wheel,
- Mounting bracket frame,
- Regenerative polyester fibre filter. Efficiency class: G3 (EN 779),
- Fully enclosed electrical junction box,
- A wide selection of control options.
|
|
Floor Standing Type
This space-saving design with a slim shape and smart vent line offers the least obstruction to the surrounding area.
* The unit can be easily installed on the floor along the wall or under the window. Maintenance is simple.
* This type can be hung on the wall for easier cleaning.
|
|
| ... products without technical information |
| |
hotset presents a wide product spectrum of hotspring® coil heaters:
- Starting with WRP / Micro up to WRP / Maxi with different lenghts and diameters.
- Brass-coil heaters or coil heaters with clamping mechanism as heating elements for different applications.
- Heating systems such as the hotcast® sealed heater (GMH) or the hotcone® heated nozzle (BMD).
- Special products such as hotslot® and hotslight®.
- As well as a wide spectrum of applications.
hotset was already in 1980 one idea ahead as they presented the first round coil heater (type WRP Ø 3.3). Since then further innovations have been made: WRP / Mini, flat and square coil heater (WRP / F resp. WRP / Q), WRP / Maxi as well as WRP / Micro.
This innovation as well as the humidity-resistant coil heaters according to I.P. 65 (WRP Ø 3.3 - WRP / F 2.2 x 4.2 – WRP / Q 3.0 x 3.0) emphasize the consequente alignment to new challenges.
|
|
Coil heaters
High quality minitubular heaters that assure the best with respect to safety and performance.
|
|
Examples for the use of a Helmholtz Coil system:
- generation of a 3 dimensional homogenous magnetic field
- active magnetic shielding from sub Hz to MHz frequencies
- specification of gradiometers
Some characteristics:
- large 1/1000 error free homogenous region (20x20x20 cm3)
- transportable unit (1hour installation)
- delivery including transportation box
|
|
| ... products without technical information |
| |
|
This line includes the production of epoxy coils based on the latest technologies. These coils can have one, two or more HT outputs. There are also other types of ignition coils that are used in different types of petrol-engine ignition systems.
|
|
MAGDOS LT is a solenoid-driven diaphragm pump with a state of the art microprocessor-controlled electronic.
The electronic provides power to the pump drive depending on the system´s pressure requirements thus reducing power consumption, noise level and heat generation. Due to the reduced heat generation MAGDOS LT operates at ambient temperatures of up to 45°C (113°F) depending on the chemical resistance of the wetted end material.
This dosing pump is available for a capacity range of up to 6 l/h and a maximum pressure of 6 to 16 bar. A flexible pressure adjustment is possible.
Double-ball check valves ensure high accuracy even at smallest flow rates.
MAGDOS LT solenoid-driven dosing pumps are especially suitable for water treatment and applications in the process industry. Due to the hermetically sealed design they are suitable for toxic and aggressive media.
|
|
The delta® pump is the first pump worldwide with controlled solenoid drive. The suction and pressure strokes are fully monitored and can be adapted to the individual application. The delta pump is equipped for almost any application thanks to numerous drive options as well as the connection via Profibus® or CANbus to the central control station. The pump is equipped with the option “Process Timer" and thus can be used as control centre in cases where otherwise programmable logic controllers would be required.
Advantages
* Flexible adaptation to the metering task ensuring optimal metering accuracy
* The integrated injection control optoGuard® detects hydraulic failures which can then be messaged via the optional relays
* High level of economy thanks to savings with regard to accessories such as e.g. pulsation dampeners, flow monitoring etc.
* High metering accuracy even at varying backpressure
|
|
| ... products without technical information |
| |
MAGDOS LT is a solenoid-driven diaphragm pump with a state of the art microprocessor-controlled electronic.
The electronic provides power to the pump drive depending on the system´s pressure requirements thus reducing power consumption, noise level and heat generation. Due to the reduced heat generation MAGDOS LT operates at ambient temperatures of up to 45°C (113°F) depending on the chemical resistance of the wetted end material.
This dosing pump is available for a capacity range of up to 6 l/h and a maximum pressure of 6 to 16 bar. A flexible pressure adjustment is possible.
Double-ball check valves ensure high accuracy even at smallest flow rates.
MAGDOS LT solenoid-driven dosing pumps are especially suitable for water treatment and applications in the process industry. Due to the hermetically sealed design they are suitable for toxic and aggressive media.
|
|
The delta® pump is the first pump worldwide with controlled solenoid drive. The suction and pressure strokes are fully monitored and can be adapted to the individual application. The delta pump is equipped for almost any application thanks to numerous drive options as well as the connection via Profibus® or CANbus to the central control station. The pump is equipped with the option “Process Timer" and thus can be used as control centre in cases where otherwise programmable logic controllers would be required.
Advantages
* Flexible adaptation to the metering task ensuring optimal metering accuracy
* The integrated injection control optoGuard® detects hydraulic failures which can then be messaged via the optional relays
* High level of economy thanks to savings with regard to accessories such as e.g. pulsation dampeners, flow monitoring etc.
* High metering accuracy even at varying backpressure
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
