|
|
Plate heat exchangers
type PWT
The plate heat exchangers type PWT form an addition to our product range in the field of oil-water heat exchangers. In some cases they represent a cost-effective and space-saving alternative to the standard smooth pipe heat exchangers.
Description
Soldered plate heat exchangers are assembled from stamped special steel plates and connected by means of a copper shim and a special soldering process. Stamping creates a highly turbulent flow in the chambers between the plates, which enables excellent transfer of the heat. The type PWT plates stand out by their following characteristics:
Plates and connections made from special steel 1.4401
Connecting elbows and internal thread and keying surfaces.
|
|
Water oil coolers are used in many stationary hydraulic and lubricating systems to optimize the oil temperature. Water oil coolers are especially suitable in environments where water is easily accessible. The extremely quiet water oil cooler is ideal for indoor use where the cooling water cannot ice-up. The surplus energy from the heated cooling water can for instance be used to heat other water.
Off-line cooling and oil filter system
In all modern hydraulic systems, off-line oil cooling and filtering is becoming increasingly popular as the system can operate around the clock independently from the main system to avoid differences in pressure and flow conditions.
We supply both brazed plate and bolted plate heat exchangers. The main difference between these two propducts is that the bolted plate products have gaskets which enables you to change the plates easily.
|
|
Plate Heat Exchangers
Soldered and bolted plate heat exchanger
- PWT
- TL
Up to 30 bar oil pressure and from 25 to 3 000 l/min. oil flow. Operating temperature from -100 to +195 degrees. Soldered plate coolers are available from 10 - 200 plates. Bolted plate coolers are highly flexible and easy to clean thanks to the modular system.
|
|
Bolted plate coolers are ideal for sea water and specialist applications.
They are designed for use with special fluids or large capacity applications.
The main difference between the Brazed Plate and Bolted Heat Exchangers is that the Bolted Heat Exchangers have gaskets. A benefit of these heat exchangers is that they can easily be adapted by adding or replacing plates.
Flow ranges: 10-4600 m3/h
Working pressure: 10 - 25 bar
Temperature range: -20°C - +180°C
Connections: DN25-DN500 Weld neck, flange or threaded
|
|
Oil/water Heat Exchanger
Tube Bundle
Extremely compact as well as large construction series
AM
EKM
ECM
CM
SSCM
UKM
UKTM
with and without integrated aluminium ribs. Up to 35 bar oil pressure, cooling capacity from 1.5 to 300 kW, respectively 25 to 1 500 l/min. oil flow. Optionally with bypass valve for pressure peaks. Simple to clean.
|
|
| ... products without technical information |
| |
|
RFC and RFI chillers are used for cooling of little process and machines. With pump and tank intergrated they are very compact and easy to use.
|
|
|
|
|
|
Outstanding price-performance ratio
Air-water coolers are compact industrial cooling systems cha-racterised by a very special price-performance ratio. The cooling units are primarily used in applications where cooling to no more than 5 to 8 °C above the ambient temperature is required. The units are robust, uncom-plicated, technical refined and absolutely reliable in operation as all components are perfectly matched to one another, with all piping and wiring completely connected.
Eco-friendly yet cost-effective!
As freshwater is no longer needed, the costs for water supply and wastewater are dis-pensed with.
A consistently high cooling-water quality
is guaranteed by the closed cooling-water circuit, protecting the cooling channels against pollution and lime deposits.
Heat exchanger
The louver package is a parti-cularly robust design compri-sing copper pipes with alumi-nium louvers.
Pump and ventilator
Centrifugal immersion pump, housing and impeller made of brass, shaft made of Grade 1.4057 special steel. The ventilator wing is mounted on the free shaftend of the pump.
Tank
Tank made of welded and matt brushed VA sheet, Grade 1.4301.
|
|
Water cooling
AKG W Range
Brazed copper brass cooler.
Operating pressure 4 bar.
Driven by a three-phase motor.
Ideal for water-cooling!
Eight different sizes cover a wide performance range.
* Volume flow approximately 10 … 200 l/min
* Cooling power up to 130 kW
* Dimensions approximately 450 x 360 up to 1200 x 1100 mm
* Delivery deadlines on request
|
|
Almeco offers solutions for:
* Adiabatic cooling
* Dust and odor suppression
* Air humidification
* Adiabatic boosters (a capacity increase for dry coolers)
These installations use high pressure misting techniques and are used in a wide range of industries: agriculture, textiles, steel, print shops, …
Adiabatic boosters
Where normal dry coolers fail (for example due to high temperatures during the summer months), adiabatic boosters can supply additional cooling.
|
|
| ... products without technical information |
| |
|
The Electric H2O media filtration system is designed to economically improve the efficiencies of water cooled HVAC systems. This filter will remove suspended solids to 5 microns nominally from your system. Media filtration will extend the life and improve the operating efficiencies of your cooling towers, chiller condensers and heat exchangers. Our system complements your chemical treatment program by removing suspended contaminants. A proactive water treatment program that includes our filtration can provide a significant return on your investment.
|
|
|
|
|
|
CTV-F2
Cooling Tower Vacuum Filter
Overview
The CTV-F2 Filtration System is specifically designed to work with Goodway's popular
CTV-1500 Cooling Tower Vacuum. In situations where the cooling tower water needs to be cleaned, filtered and returned to the basin, using the CTV-F2 in conjunction with the
CTV-1500 is the only way to go. This carefully engineered unit can handle the high flow and small micron filtration requirements typically encountered when cleaning cooling towers. A pair of reusable filter cartridges allows the operator to clean cooling tower water down to 5 microns. With quick lock lids, filters can be changed out in a matter of seconds. The integrated dolly enables the user to conveniently place the filters, with the Cooling Tower Vacuum, alongside the basin. Clean, filtered water can then discharged back into the tower basin at up to 50 gallons per minute.
Specs
Input Water Pressure: Maximum 30 PSI
at 50 GPM
Filters: Two reusable synthetic,
40 square foot, 5 and 60 micron media
Dimensions: 38" high x 20" wide x 20" deep Weight: 70 lbs net dry
|
|
| ... products without technical information |
| |
Water Delivery Hose
* The wall is constructed from a rigid PVC spiral encased in flexible PVC
* Stock sizes from 3/4” to 4”
* Black or translucent green
* Lightweight
* Flexible
* Weather resistant
* Durable
|
|
... see all the products in the category
Hoses
|
| ... products without technical information |
| |
IF - IntelliFlow Water Saver
IntelliFlow is designed to monitor the water coolant circuit in a resistance welding application. This computer controlled product can detect "cap off" conditions, display the flow rate, and display the water temperature.
- Detect and shut off water when the cap comes off
- Monitor and display coolant flow rate
- Monitor and display coolant temperature
- Monitors both supply and return coolant circuit
|
|
| ... products without technical information |
| |
|
|
|
|
Water cooling system
For every tonne of Aluminium cast some 330 KW of heat is produced. Normally this heat is removed by Water Cooling. With efficient re-use of water with minimal power usage, energy losses and hence costs are reduced with an enhancement in Aluminium product margin.
The Fives Solios cooling water system is designed with this philosophy in mind. We recognise and appreciate the critical nature of the system for the rest of the cast house. Our company has significant in-house expertise and specialist consultants utilising 30 years of cast house experience to enable us to offer a solution that will conform to our client’s enquiry requirements.
Keeping the Energy Balance low - Cost Effective Cooling the Fives Solios Way can be achieved.
We also have the ability to offer design alternatives to our customers employing high quality equipment with proven track records, features include:
The complete Central Process Water Cooling System Package. This includes Design, Supply, Install, Commission and Maintenance.
Close control of Water Temperatures.
Biological Control of Process Water.
Designs for variety of Weather Conditions from Iceland at -35°C to Oman at + 52°C.
Energy Management Control Systems.
N+1 Redundancy for 365 24/7 Continuous operation.
Options of " FREE COOLING " from Sea or River if locally available.
|
|
CASTALIA, the condensing absorption chiller with power modulation, (Systema S.p.A. patent-pending), for the production of cooling and hot water, can be used as a heating system in winter and as a cooling system in summer.
The installation of this brand-new product guarantees important energy savings in comparison with the traditional separated systems such as boiler and electric chiller.
CASTALIA is composed by a highly efficient premixed gas burner with modulation combined with an exchanger: the NOX emissions are very low.
There is the possibility to choose the equipment between 8 different models, with a heating capacity from 12.9 kW to 139.2 kW and a thermic performance of 107.4%.
The available cooling capacity range is 12.5 kW - 115 kW with a cooling performance of 103% that can reach 130% if we consider the energy recovery for the production of sanitary hot water.
|
|
|
|
|
|
We are glad to inform you that Systema S.p.A. has introduced in its range of products the "RENEWABLE ENERGY PACKAGE".
This complete product is an Absorption refrigerator-thermic System created for the external installation.
Its power supplyies can be:
- gas;
- hot water produced by solar concentrators and collectors;
- fume-steam heat recovery systems;
- fumes and hot water of a cogenerator.
Thanks to a cogenerator, Renewable Energy Package, becomes a CCHP system (combined cooling, heating and power) for the production of hot water, cooling water and electricity.
This preassembled OR ENBLOC package is composed by an Absoprtion Chiller, a cooling tower, a cool and hot water storage, pumps, filters, mixing valves and a control panel for the management of the complete system.
Systema S.p.A. designs, produces and commissions the Renewable Energy Package in its industrial plants.
One of the most important advantages is that our company offers a complete high-tecnology system to be installed outside, according to the particular requirements of the customer.
|
|
Escaldador of hot water showers.
Especially designed for products with leaf, divided and rallados.
Production from 1,000 kg/h to 15,000 kg/h.
Escaldador with two systems of cooling by water showers or air.
Developed to take care of the product and to optimize the consumption of water and steam.
|
|
| ... products without technical information |
| |
| ... products without technical information |
| |
|
|
