|
|
Description A swiveling leveling foot for stable positioning on uneven floors
Material Fiberglass reinforced nylon
Color Black (other colors on request)
Pack Quantity 10 pieces |
|
These machine mounts may be used in generator sets, power presses, motors, pumps, machine tools, etc...
They guarantee different degrees of stiffness in the three main axes.
Among that serie of mounts there is a range specially designed for marine applications. |
|
Egaña has included some new products in its wide range of machine leveling feet, available in several sizes.
Apart from the standard adjustable machine mounts of HIGH OR LOW PROFILE (In STEEL or STAINLESS) used for all type of machines, there are other types of mounts:
CAM SERIE gives a very good solution for shear and stamping machines and for injection machines.
POLYURETHANE SERIE (In STEEL or STAINLESS) is commonly used for presses and plastic injection machines that work with oils and with corrosive liquids.
(Available with socket in Polyurethane and Rubber (65º).
WEDGE MOUNTS are indicated when perfect levelling is requested. (Big bedplate machinery).
EGAMOUNT serie can be used for the isolation of noise and vibration for generators, tool and production machinery, presses.... They are specially indicated when it is necessary to avoid considerable horizontal movement. Their horizontal stiffness is greater than their vertical stiffness. |
|
Adjustable feet
Thanks to BÜLTE’s new adjustable feet, you can test the qualities of an entirely plastic product.
Designed for supporting and levelling machinery and various devices, the adjusting feet consist of a single, integral part : a screw and an injection moulded nylon foot.
We provide three models:
“round”: Ø 25 mm foot
“round”: Ø 30 mm foot
“octagonal”: 30 mm wrench foot
Height adjustment is by means of an hexagonal section moulded as part of the foot (13 mm A/F).
We supply dimensions M5, M6, M8, M10 and M12, and thread lengths of 10 to 80 mm.
The advantages of the adjustable foot lie in its nylon material, overall weight and resistance to chemicals.
In addition to black which is the standard colour, these parts are available in a wide range of colours.
The standard materials used are Nylon PA6 and polyamides glass filled. Other materials are available on request.
This product thus provides an inexpensive alternative to conventional plastic/metal feet.
|
|
Shock & Antivibration machines feet allowing the following performances:
Insulation of the shocks and vibrations
Integrated levelling
Improve machine stability
Anchoring no require
Load by feet 10 to 10.000 kg
Broad range for all the aplications |
|
Fabcel® LeveLers are designed to permit fast, simplified precise leveling of all types of equipment and will compensate for up to a 5° tilt in the mounting surface. Furnished with the patented Fabcel® pad, they control shock, vibration and noise and will not allow equipment to creep or walk.
Model SW and SWB Swivel-type LeveLers compensate up to 10° tilt each side of the centerline in order to adjust for uneven bearing surfaces. The base of the Swivel LeveLer is designed to assure solid support. The Swivel LeveLer is zinc plated and gold iridited to resist rust. Model SWB is furnished with a 2" long adjusting bolt. The Swivel-type LeveLers can be furnished with the patented Fabcel® pad to control shock, vibration and noise and will not allow equipment to creep or walk. |
|
| Machine feet and bases available in many specifications 303, 304 and 316 Grade Stainless Steel, Die Cast Zinc, Zinc Plated - Nuts, Washers and Neoprene Pads also available |
|
SUROSOL®: the solution stability of your machines.
SUROSOL® is a range of adjustable feet and bases for machines, conceived to reduce the vibrations, to compensate for the unevennesses and to remove the disadvantages of the sealing of the machines. SUROSOL® allows an establishment and a setting fast level which support the mobility of your park machine. |
|
| For equipment that is installed in active seismic areas, our seismic restraints may be used to secure equipment to the ground. These attractive, high strength stainless brackets attach to our leveling components to form a rigid connection that minimizes the accumulation of seismic accelerations. |
|
| The VIBROSTOP TSZ damper was designed for the isolation of large machinery, with significant weight and unfavourable ratio between the height of the centre of gravity and the base area, without fear of their falling. Loads range from 2000 to 20000 daN. |
|
Precision, height adjustable, vibration damping machine mounts for accurate, efficient and economical machine installation
Typical applications:
Machine tools, rubber and plastics machinery, printing and packaging machinery. |
|
UNISORB® Novibra®¹ Anti-vibration Mounts
The Novibra® product line includes various rubber to metal bonded anti-vibration mounts. Natural rubber is used, generally loaded in a combination of shear and compression to achieve the most effective levels of vibration isolation and to ensure long life for the mounts and machinery mounted on them.
UNISORB® Novibra® Mounts are available in a wide range of shapes and sizes which vary according to the application. Many models are available from stock. |
|
The guiding System guarantees a silent lifting operation and a high stability also in it's highest working position. In the accessories you will find table foots, joining beams and table plate holder to mount a complete frame. The construction of the joining beam is made to place a roll container below the table (overhead clearance 590 mm).
Max. load 1'500 N (3'000 N) per table leg
please check also the maximum system load
Stroke 150 - 500 mm
minimal length 637 mm
max. bending moment static Mb: 1'000 Nm
max. bending moment dynamic Mb dyn: 150 Nm
Colour: RAL 9006 silver aluminium
Please ask for other solutions and enlarged accessories
|
|
| ... products without technical information |
| |
|
|
see the results for the following category
