|
|
The console-controlled range of MultiTest-x test frames display load, displacement and speed. Simple test programs can be created and stored.
The MultiTest-x has been designed specifically to meet the requirement for ease of routine use in QC laboratories, or production environments which are often not ideal areas for using a PC. |
|
Mecmesin offer a range of sophisticated Computer-controlled Test Frames. The Multi-test-i is available in a range of capacities to accommodate all your testing requirements, from the entry level MultiTest 1-i through to the advanced twin column test frames that have been specifically designed to test large or high load samples or products.
Intelligent loadcells mounted to the test frame allow the MultiTest-i to download data directly to a PC via the serial port at a rate of 2000 times a second. If your test requirements change then the MultiTest-i can easily be upgraded with a different load cell suppliers that meet your new testing requirements.
Emperor, Mecmesin’s powerful yet user-friendly professional control software, provides both a simple platform for routine analyses on the factory floor, as well as an advanced platform for sophisticated laboratory test routines. Programmable functions include running a test to a pre-determined force/torque, displacement, time or to break, as well as graphical interrogation of results.
Applications
The MultiTest-i range of motorised test stands can be used for many different applications including:-
Compressive testing
Deformation testing
Extension testing
Materials testing
Medical device testing
Packaging testing
Spring testing
Tensile testing
Textile testing
Top-load testing
Mecmesin offer a wide range of standard grips and fixtures, to hold your specimen. Alternatively, a custom-built fixture can be designed for your specific application. |
|
| The Vortex is a twin-column motorised torque industrial testing machine. Speed is set with a rotary potentiomer controller. Either speed or total rotation is indicated on an LCD display. Torque is measured by a `smart` static torque transducer and displayed on an AFTI. |
|
The DFS-II is a system used for testing the force on the tip of the tool of a wire bonder and in some die attach bond heads as well. The DFS-II system scope professional displays a wave form that permits the user to establish whether there is excessive vibration, impact force or unwanted movement on the bond head as it touches down on the surface of the DFS-II Sensor. The wave form can then be printed on the on board professional printer for hard copy recording.
This is a perfect tool for calibration, troubleshooting, setup and verification of machine operation. Both force and time duration can be measured in actual units (force in grams and time in milliseconds) without the need of conversion charts or extra calculations. The DFS-II can be used with wedge bonders of any type (automatic, semiautomatic and manual) and of any manufacture. Maximum force measured by the sensor is 500g.
Contact us at mailus@hybond.com for more information. |
|
The LCIC-WIM is the 2nd generation to our popular line of Force gage Interface Card that thousands of them are being used all around the world. The LCIC-WIM samples the Load Cell in a rate of 52,000 samples per second so, it fits all dynamic weighing and force measurement applications.
The package includes also our unique LCIC-WIM Professional monitor utility which is a vital tool for analyzing dynamic load/force applications. It allows to collect the data, showing the results in graphic mode or save it for later use in excel etc.
The communication with the LCIC-WIM is via USB or RS232/485 so, it can be used with almost any PROFESSIONAL PC or other professional computer.
|
|
| For precise repeatable and reproducible measurements, test stand is necessary in order to keep same test condition. It also negates the need for heavy manual labor when applying large forces, and makes the task of obtaining measuremnets more efficient. |
|
the simple BAT Stand
BAT 750
To insure the correct positioning of the force gauge in relation to the sample to be tested, the simple BAT Stand is the ideal solution.
the simple BAT Stand
Basic motorized test stand
BATDRIVE
The BATDRIVE basic motorized test stand is a force gauge support designed to test samples at a regular speed; it is especially well suited for small parts, and for tests requiring low force levels (less than 500 N).
Basic motorized test stand
The 1 to 5KN test machine
STENTOR
The STENTOR 1000, 2500 and 5000 are designed to carry out tests for all applications in which the displacement speed is specified by a standard, together with all applications in which the speed can have an influence on the measurement itself.
The 1 to 5KN test machine
The 5 to 50KN test machine
ATLAS
The ATLAS 5 to 50 KN test machine is designed to carry out tests in all cases where the force necessary is greater than 5 KN. |
|
To carry out a precise, repetitive torque measurement,
it is often necessary to use a torsion test stand.
The TWIST, a 1 to 12 NM torsion test stand with combined Torque/Angle measurement provides this function.
The torsion meter enables torsion tests to be made on various samples such as springs, or metal or plastic parts.
It is made up of a horizontal, rigid test stand, with two rails to provide precision guidance.
Its calculating power enables it to record values coming from 2 different sensors simultaneously, monitor the set points and make a calculation for each channel.
On its display, it shows a Torque/Angle graph curve.
It provides the simplest, most versatile system for dealing with the most wide-ranging torsion tests in the workshop or in the laboratory. |
|
IMADA has wide range of attachment for various applications.
We also can produce special attachment as customized version.
Please request special gripping fixtures. |
|
| ... products without technical information |
| |
The ELT-400 is an innovative professional tester for evaluating magnetic radiation exposure in the workplace and in public spaces. The device was developed for use by health and safety officials in industry, by insurance companies and by service-industry users.
The ELT-400 handles almost all of the required measurements in the low to medium frequency range with accuracy and ease. The device is comparable to professional sound level meters, which are commonly used in the workplace to protect against excessive noise exposure.
Options
Use as an active probe with a three-channel analog output for analysis applications involving an oscilloscope specifications or spectrum analyzer specifications.
|
|
Imagine a rooftop with several mobile radio systems and a TV professional transmitter nearby. How can you tell what each system is contributing to the overall field exposure level? When it comes to different areas such as occupational safety, the general public and the home, the relevant field levels can vary. Which field sources are at stake? What is the corresponding fieldstrength?
The SRM-3000 answers these questions, directly on site. With its triaxial probe, the SRM-3000 measures the electromagnetic field selectively, by service and frequency, regardless of where the radiation is coming from. You can view the results as a field strength or as a percent of the legal limit. It provides an immediate summary of all sources with their field strengths, right on the spot.
Narda’s Selective Radiation Meter SRM-3000 is highly portable, battery-powered and immune to interference so you can take it with you wherever you go. It covers the frequency range of main interest from FM radio to 3rd generation mobile radio systems. The SRM evaluates the field strengths it measures in accordance with the applicable regulations, and delivers results as a field strength level or as a percent of the legal limit. No PC is required for this operation. |
|
We offer the world's largest range of EMC Transient & Impulse test solutions for compliance or 1st article testing. Innovative transient/impulse industrial test systems from a few 100 volts to over 100 kV, tailored specifically for your industry. Specialists in avionic, CE immunity, telecommunication, and component test equipment.
|
|
| Product quality, output and yield of manufacturing processes can be improved considerably when problems related to static electricity are identified and dealt with effectively. Electrostatic fieldmeters are appropriate measuring tools to simply identify static electricity problems. |
|
Electromagnetic Interference (EMI) is the disruption caused by an electromagnetic field. EMI can cause equipment lock-up, sensor parametric errors, undesirable process variations, erratic response, software errors, and even component damage.
|
|
The Narda Broadband Field Meter NBM-550 has been designed to measure electromagnetic field strengths in the vicinity of industrial transmitters and industrial centers, and to evaluate and record the results in the context of human safety standards. Particular attention has been paid to ease of use. The instrument can be operated with one hand by anyone – left-handed or right-handed. The probes are isotropic, i.e. equally sensitive in all directions, so users do not need to worry about the direction the radiation is coming from.
The result data memory holds up to 5000 results along with date and time information. A GPS receiver (option) plugged into the basic unit and connected via USB gives the NBM the capability to store position data for each measurement. Instead of handwritten notes, voice comments can also be recorded. All the data can be uploaded to a PC and managed using the PC software supplied with the instrument. Measurement reports are therefore very easy to generate.
The basic unit and the probes are separately calibrated at the factory. The probe calibration data are stored in an EPROM in the probe itself. The NMB basic unit retrieves this automatically via the intelligent probe interface, and takes it into account in the results. |
|
DIRIS has been developed by Socomec over the last 10 years. It is a complete system for the operation of low and high voltage electrical networks and offers measurement and monitoring of electrical values, energy metering and management (electricity, water and gas), command and professional remote control of equipment and network protection.
3 new, highly-innovative products are being added to this range: the DIRIS A20, A40 and A41
Application:
All industrial or commercial LV/HV electrical installations
Original features and advantages:
The DIRIS A products meet all the requirements of installers and users:
- Easy to fit (compact casing, plug-in terminal blocks suppliers)
- Extremely accurate with high quality measurements using an ASIC component developed by Socomec
- Optimum readability with backlit, high-resolution LCD display
- Direct access to data via 4 or 6 large keys
- Board can be upgraded with additional modules (communication, harmonics, alarms) providing long-term value for your investment |
|
The Electric Field Meter EM03 is a small, compact unit for measuring static electrical charges with digital display in Volts. The mode of function of the instrument is based on the influence principle.
When measuring static charges, the distance between the instrument and the object is selectable between 1 and 20 cm.
The integrated micro-computer automatically converts the measured field strength over the preselected measuring distance (distance between test object and measurement electrode) into Volt, allowing charges up to 200 kV to be measured. |
|
| ... products without technical information |
| |
|
|
see the results for the following category
