|
|
|
The Strain Gage Knowledge Base is a compendium of technical information related to the application of Vishay Micro-Measurements strain gages, installation accessories and instruments in the making of precision strain measurements.
|
|
Chatillon® DFE Series
The Chatillon® DFE Series is a compact, easy-to-use force gauge designed for economy applications without compromising functionality. Ideal for handheld or test stand applications, the DFE is available with capacities from 2 lbf (1 kgf, 10 N) to 500 lbf (250 kgf, 2500 N). The DFE features an integral loadcell with a measurement accuracy of better than 0.25% full scale. A large, easy-to-read, high resolution dot matrix LCD display supports a variety of standard gauge functions including normal and peak readings, high/low limits, setpoints, pass/fail results, statistical results, loadcell actuation and direction. Loads are displayed in ozf, gf, lbf, kgf and N units. The display can be inverted and displayed results may be "hidden" from the operator. The DFE gauge may be specified with or without RS232 serial communication. All DFE Series force gauges come with a carrying case, battery adapter/charger, testing accessories and NIST Certificate of Calibration with data. Uncertainty data per ISO/IEC 17025 is supplied standard.
Standard Gauge Measurement Functions
Normal Tensile and Compression Measurement
Peak Tension and Compression Measurement
Pass-Fail Limits
High & Low Setpoint Limits
Statistical Calculations
|
|
Simple digital force gauge : CENTOR FIRST
Simple and yet complete, the CENTOR First force gauge uses efficient technology to simplify force measurements, in tension and compression ...
Graphical force gauge : CENTOR EASY
Simple and complete,the CENTOR "Easy" is the best instrument for measuring in the workshop.The screen provides simultaneous readout of the current and maximum values as well as...
Advanced graphic dynamometer : CENTOR STAR
The CENTOR "Star"has many functions.It will become your preferred force measurement tool.The graphic screen displays the complete Force=F(t) curve ,...
Two sensors force gauge : CENTOR DUAL
It has all the functions of an STAR force gauge, but its calculation power enables it to record values sent by 2 different sensors simultaneously
|
|
Mecmesin digital force gauges are state of the art instruments, specifically designed to measure force in tension and compression (push or pull) with optimum precision and performance.
The Advanced Force Gauge (Mark 4) is the most versatile and fully-featured instrument offered by Mecmesin. The AFG comprises of 10 different models ranging from 2.5N to 2.5KN with the added ability of 1st peak and ultimate peak hold. The bi-directional interface (RS232, Mitutoyo, Analogue) ensures full data transfer between PC's, data-loggers and Mecmesin stands. All AFG's feature superb accuracy at ±0.1% of full scale and a sampling rate of 5,000 times per second.
The BFG (Basic Force Gauge) range of rugged, flexible and reliable instruments are designed for easy operation and outstanding force measurement performance - all at a budget price. A precise and reliable instrument, the BFG features accuracy at ±0.25% of full scale and a sampling rate of 1,000 times per second.
The CFG (Compact Force Gauge) is a pocket-sized, lightweight and low-cost force gauge, ideal for performing elementary tension and compression testing. The CFG is available in 3 capacities and features include a data sampling rate of 10Hz, accuracy of ±0.5% and versatile measurement options lbf, N, ozf, kgf and gf, with a resolution of 1:1000 or better.
Used either handheld or combined with a test stand and accessories they offer a complete testing solution for a virtually limitless range of tension and compression applications.
|
|
FGV-X / FGE-X DART Series
Our workhorse gauge just got better! Faster, smarter, easier to use!
The 1000 series, with its fast 1000 Hz update rate, is able to capture the highest force peaks. With variable display update rate and the same superior accuracy as the DFS series, these new gauges feature unique 180 degree flip displays, permitting the user to read the display right-side up. Additional enhancements are; dual direction keypad, variable baud rate for SPC applications, selectable force direction indication, and selectable power on/off settings.
Designed to ergonomically fit in the palm of your hand, the rugged, all metal construction of the FGE-X and FGV-X permit accurate measurement and display of compression and tension forces up to 100 pounds. (up to 1,000 lbs using the FGV-1000HX)
The FGV-X Dart Series gauges include RS-232c, RS-232 cable, analog outputs, (analog cable is extra) as well as an overload output signal for gauge protection.
|
|
| ... products without technical information |
| |
Federal Signal introduces the SemiStat® Status Indicator. Designed to meet the needs of the OEM market, the SemiStat is an attractive, easy-to-install and economical status indicator.
- Available in 24VAC/VDC
- Tri- or quad-color models
- Available in chrome (model SCC) or white (model SCB) finish
- 100,000 hour vibration resistant LED lamps
- Integrated sounder
- Surface mount
- Indoor use only
|
|
Format DIN 144x144.
Automat for centralising technical faults with 12 high luminosity leds, PC parameter settings and text display.
A "top of the range" product with all the functions of the J3000 with all the flexibility of PC programming.
Many additional functions.
Application: All industries including "high risk". This product is preferable in situations requiring sophisticated or different, channel by channel settings.
Simple, user-friendly PC software supplied. Bus RS422/485 Modbus/Jbus.
Selections by input channels
Output scheduler
Scheduling and processing of alarms and indicators
Text display with History and settings menu
|
|
The Series 725 Alarm Annunciator provides the ideal solution to all your alarm system requirements. This innovative and unique design gives exceptional flexibility, reliability and programmability.
- Only 145mm deep
- Fully programmable with power applied and without having to remove lightboxes, backplanes or alarm cards
- Proven, ASIC-based technology: fewer components means higher reliability
- Ultra bright LED's available in a range of six colours
- Surpasses the EMC and LVD directives.
With a range of three window sizes, six colours and a choice of bulbs or ultra-bright LED illumination, a format and size will be available to match your exact requirements.
Each individual alarm way is fully programmable from the front, using the integral programming module. This allows for many different features giving thousands of possible combinations.
Numerous relay outputs are included as standard to connect to external equipment and individual repeat relays can be supplied as an option. The ASIC technology utilised in this design has a proven track record in a wide range of industries around the world.
|
|
LN1000 Intrinsically Safe Annunciator provides a unique solution for problems with hazardous area alarm indication. The annunciator provides a visual display of the alarm status including 'first-up' information and can be mounted in the hazardous area for the benefit of operators working in any Zone.
The lightweight stainless steel construction gives a compact and simple to install modular unit which can easily be expanded by the addition of extra alarm cards.
Maintenance can be carried out live without the necessity of 'gas checks' or prior shutdown. Unlike flameproof, purged and type 'N' systems, installation is simple and relatively low cost.
Power to the annunciator is supplied from the safe area through a single Intrinsically Safe interface for up to 32 channels.
With the addition of a number of ancillary devices a complete intrinsically safe alarm and control package can be provided
|
|
The PEX7250 Explosion Proof Alarm Annunciator offers a vast range of features and benefits normally reserved for use in safe area annunciators only. The heart of the system is our field proven Series 725 Alarm Annunciator which is available in 3 individual window sizes 30mm x 30mm, 30mm x 60mm or 60mm x 60mm. Reliability of the system is vastly improved over conventional systems with the use of ASIC's (Application Specific Integrated Circuits) for each pair of alarms, removing any reliance on common control cards. The standard enclosure is copper free cast alloy, finished in a light grey two-part epoxy paint, making it ideal for offshore applications.
Systems are available in a range of formats and sizes and are certified for use in Zone 1 hazardous areas. All systems are automatically covered by our standard 5 Year Warranty.
|
|
Explosion Proof Alarm Annunciator from RTK Instruments
RTK Instruments’ PEX7250 Explosion Proof Alarm Annunciator, suitable for use in Zone 1 and Zone 2 hazardous areas, offers a vast range of features and benefits normally reserved for use in safe area annunciators only.
The heart of the system is RTK Instruments’ field-proven Series 725 Alarm Annunciator, which uses multi-redundant ASIC technology to greatly improve reliability compared with conventional systems. This high level of reliability is backed up by RTK Instruments’ 5 year warranty.
The PEX7250 Alarm Annunciator is available in a range of sizes and shapes from one to 56 points in a single enclosure, with a choice of three window sizes. Illumination is using high reliability, ultra-bright LEDs.
The standard enclosure is copper-free cast alloy and finished in a light grey two-part epoxy paint, making it ideal for offshore applications. A stainless steel enclosure is available as an option.
RTK Instruments is a leading global supplier of safe and hazardous area alarm, display and interface products and can provide specific application advice, as well as product recommendations and installation advice.
|
|
The RTK UC625 Alarm System, developed from the field proven P625 range of alarm annunciators, offers the latest in ASIC technology packed into an compact design for applications where panel space is at a premium.
However simple or complex your alarm requirement, the UC625 with compact packaging, ASIC Technology and "no master module" philosophy, will give the most cost-effective solution.
Programmable alarm sequence, signal duplicating relays, dual horn relays, LED display, proven ASIC technology and dual redundant universal power inputs make it ideal for all industry sectors.
|
|
Integral or Remote Logic Design
Expandable to 256 points
Choice of Lamp or LED displays
Optional internal pushbuttons
Fully "DIP" switch configurable
Optional ModBus Slave Serial Port
IEC61508 Certified
Repeat Relay Option
The Omni16C is the latest upgrade in the series of field-proven popular Omni16 alarm annunciators (previously sold under the CONLOG brand).
Completely redesigned to take advantage of the latest technologies, this latest release offers backlit LED displays, and serial communications.
|
|
A16B Alarm Annunciator(604 600)
• Programmable with PC or other control devices
• Easy transitions between hardware / software configurations
• 3 port 2.5kVAC isolation
• High efficiency indicator LED’s in front panel
• Low power consumption
• DIN 19235 standard compatible signal functioning
• Removable signal labels
• Wide operation temperature range
The A16B is programmable industrial 16 channel alarm annunciator with different signalization options and compatible with DIN19235 standards. A16B alarm inputs interrogated with 24/110 AC/DC voltage. High isolation is provided between input, output and power supply circuits for maximum safety. A16B is DIP switch configurable and also programmable via Windows based software which allows easy and flexible configuration of input and output characteristics.
|
|
FEATURES
• Multicolored 10-bar (5 green, 3 yellow, 2 red) LED displays state of charge.
• The top LED illuminates only when the battery is properly charged.
• Double flashing red LEDs signal “empty” alarm at 80% discharge.
• Recognizes improperly charged battery.
• Both fixed and adjustable discharge profiles are available.
• Easy to install.
|
|
The Next Generation Partial Discharge Analysis System
The detection and monitoring of partial discharges (PD) is of vital importance because PD phenomena often precede an insulation breakdown of high voltage equipment leading to cost intensive outages and repairs.
The MPD 600 Partial Discharge Analysis System is a high-end, high-precision, modular acquisition and analysis toolkit for detecting, recording, and analyzing partial discharge events in many applications. Its versatility and robustness make the MPD 600 the ideal system for both laboratory and on-site measurements of partial discharge in any kind of electrical equipment such as transformers, rotating machines and cable systems (including HV and EHV cables).
|
|
|
The partial TLA dung measurement of electric motors and generators during the current enterprise is world-wide increasingly used. Thus isolation problems can in time be recognized and revision work be better planned.
|
|
|
Digital and Analog Partial Discharge measuring systems, including coupling capacitors, measuring impedance, noise reduction filters, calibrators, PD bridges, special software for PD evaluation and analysis. HV and LV filters. Shielded enclosures. Complete HV cable test sets. Power Cable Test Van for on-site PD fault location. Automatic PD systems for switchgear, surge arrestors, and transformer/motor windings. Ultrasonic PD Sensors.
|
|
| ... products without technical information |
| |
Electrical position indicators and combi switchboxes
Intelligent electrical position indicators with automatic commissioning and initialisation, available for quarter turn and linear actuators, field-bus capable combi switchboxes with integrated pilot valves, customer-specific special solutions, versions for OEMs and other makes available
|
|
Company COMPAUT offers a broad range of rules and meters of quality.
The majority of this whole of visualization can be delivered in 24:00
Among these rules, many models are perfectly compatible, as well mechanically as electrically, with the principal standards of the market.
You can thus come to replace those which you usually use, without same having to change the connectors, the whole for a price without comparison.
In addition, company COMPAUT points out that it carries out in its workshops the repair of the meters and the rules, some is the mark, and this within very short times.
N’ thus do not hesitate to entrust to us your defective products for a free estimate.
|
|
| ... products without technical information |
| |
| ... products without technical information |
| |
Using a rotating laser as their reference, the LS-B series receivers provide a machine operator the grade information needed for increased productivity!
LS-B2
In manual or automatic indicate mode, the LS-B2 provides precise grade management with 4 indicate leves from rough to super-fine grade. It features adjustable display lamp brightness for visibility throughout the day. The LS-B2 works easily with any machine, and its quick-release clamp allows simple setup from one machine to another. There's also an available cordless RD-2 remote display for grade indication right in the machine cab!
LS-B4
The LS-B4 provides accurate, one-person control at a price suitable for any budget. It features a bright 3-color display, selectable on-grade band widths, optional rechargeable batteries for cordless use, power-saving mode and auto-shut-off, compatibility with Topcon's RD-2 remote display, and more!
LS-B3
The LS-B3 offers the right combination of simplicity and technology to control all types of excavating. For fast setup without the need for extra hardware, it features a heavy-duty dual magnetic clamp - strong enough for even the toughest jobs. The LS-B3 has 9 grade indication channels and 3 on-grade positions to choose from, as well as auto-sleep, auto-shut-off, and more!
|
|
|
