|
|
|
|
|
|
Super high-speed sampling at 2000 times/second. Digital hold and peak hold functions. Ideal for measuring the dynamic phenomena of loads, pressure, torque, tension, etc.
The AD-4532B is equipped with a 2D (5-level) comparator function. This function makes it possible to determine the acceptability of the total result by performing a sequential comparison while shifting between the upper/lower limit in five levels using a time axis or an external input (trigger). The AD-4532B is ideal for use in measurements such as a press-in operation, which require changes in the comparison value as time elapses. The five comparators can also be used separately. The comparator judgment is indicated by a highly intuitive, tricolor (Orange/Green/Red) LED on the measurement data display.
The AD-4532B also features a chatter-prevention function. If bouncing of the comparator value occurs repeatedly near the upper/lower limit, a heavy burden will be placed on the relay circuit and other parts. To prevent this, the AD-4532B has a function to set the hysteresis width and time.
The AD-4532B comes equipped with an analog amplifier voltage output (±10V), a D/A analog voltage output (±10V), a comparator output and a Modbus-RTU input/output. In addition, we offer an optional BCD output, RS-232C input/output, D/A analog voltage/current output (±10V / 4-20mA) and Ethernet. The upper/lower limit setting, the zero compensation function and the hold function can be executed via Modbus-RTU.
Please see the AD-4532B catalog for further details.
|
|
The LCIC-WIM is the 2nd generation to our popular line of Load Cell Interface Card that thousands of them are being used all around the world. The LCIC-WIM samples the Load Cell in a rate of 52,000 samples per second so, it fits all dynamic weighing and force measurement applications.
The package includes also our unique LCIC-WIM Monitor utility which is a vital tool for analyzing dynamic load/force applications. It allows to collect the data, showing the results in graphic mode or save it for later use in excel etc.
The communication with the LCIC-WIM is via USB or RS232/485 so, it can be used with almost any PC or other computer.
|
|
A truly measured roll force is crucial in achieving correct roll gap settings, true force distribution from operator side to drive side of your mill and supervision of the backup bearings and roll eccentricity. The Millmate Roll Force System incorporates all these essential features.
The Millmate Roll Force System consists of a Millmate Controller (MC 400) and two load cells with matching units. The various types and the wide load range of Millmate Roll Force load cells cover practically all conceivable roll force measurement applications.
|
|
The DFS-II is a system used for testing the force on the tip of the tool of a wire bonder and in some die attach bond heads as well. The DFS-II system scope displays a wave form that permits the user to establish whether there is excessive vibration, impact force or unwanted movement on the bond head as it touches down on the surface of the DFS-II Sensor. The wave form can then be printed on the on board printer for hard copy recording.
This is a perfect tool for calibration, troubleshooting, setup and verification of machine operation. Both force and time duration can be measured in actual units (force in grams and time in milliseconds) without the need of conversion charts or extra calculations. The DFS-II can be used with wire bonders of any type (automatic, semiautomatic and manual) and of any manufacture. Maximum force measured by the sensor is 500g.
Contact us at mailus@hybond.com for more information.
|
|
IMADA has wide range of attachment for various applications.
We also can produce special attachment as customized version.
Please request special gripping fixtures.
|
|
|
|
|
|
Hand-held torque meter with separate sensor for measuring the torque of screws, components, screw and plug connectors, drive shafts etc.
Mains and battery operation with memory and output signal
Measuring range 0 - 0.5 Nm/2.000 Nm/5.000 Nm/10.00 Nm
Resolution 0.001 Nm/0.01 Nm
- Two selectable modes: Real Time: to display load transients
Peak Modes: to capture the peak force achieved during a test
- Display of opening or close torque (clockwise and counterclockwise torque)
- 3 selectable units: Nm, kgfm, lb.in or Ncm, kgfcm, lb.in
- Programmable high/low setpoints for go/no-go testing with color-coded indicators (orange, green, red) in the LED display and relais outputs
- Storage of 1000 values for recall:
· on the display
· for data transfer to PC
· for printing with report
- torque meter with high internal Sampling rate
- 3 output signals: RS232, analog and Mitutoyo Digimatic
- 4 different torque sensors available
- The torque sensors of models HTG2-10 and HTG2-10 NC includes an additional supporting handle for better operation
- Torque measuring unti for fast, accurate measuring
- High repeatability
- Easy to use
- Manufacturer`s certificate with measured values is included
|
|
Simple and yet complete, the CENTOR First uses efficient technology to simplify force measurements, in tension and compression.
A big display shows the force measured in tension or compression in the unit selected by the operator: newtons, kilograms or pounds. The bar graph completes the measurement.
The 3 keys make it very easy to use this force gauge and access the essential functions: measurement of the peak tension or compression value, resetting to
zero, and changing the measuring units. It is an ideal tool for basic tests during production. Its metal casing, protected by an elastomer overmould, gives it
exceptional strength.
The internal sensor stands up to an overload of 200% of its maximum capacity.
Simple, precise, robust, supplied with its own carrying case, mains adaptor and certificate, ready for use, it is the basic tool for force measurement.
|
|
|
|
|
|
Using the Centor technology, the Centor W Easy TW digital torque gauges have a very large graphic display and show a maximum amount of information for more efficient measuring: they show the current reading and the peak value at the same time, and a bar graph to show the operator whether they are close to their maximum capacity. If necessary, the backlighting can be used to further enhance reading comfort.
Mounted with a non removable wrench torque sensor, it allows you to measure very big torques with easily without too much force. Ideal to check the bolts, tools, screw ... in production or quality with accuracy. Its advanced measurement chain enables it to use a sampling rate of 1,000 Hertz with a resolution of 1/10,000 FS and a total error of less than 0.5% FS.
Many other functions complete the possibilities of the gauge:
- the Set point functions can be used to carry out “OK, NOK” tests: a symbol appears on the display.
- The fully programmable RS232 output sends the data to a PC.
- A digimatic output can be used with Mitutoyo statistical printers.
|
|
The E100 SBT Series Strain Gauge Base Mounted Transducer has a substantial easily mounted body, which houses the shaft and strain gauge assembly. The shaft is mounted on its outer end in a ball race, ensuring accurate torque measurement. A chuck accommodates simple adapters which can be supplied with standard square dimensions, or machined to suit specific applications.
|
|
Besides having all the functionalities of the CENTORW Easy, the CENTOR W Star torque gauge provides handy further possibilities: the graphic display shows the
full graph Torque = C(t). This gives you a general overview of the current test.
The torque gauge is able to make several types of calculations on demand (break point, first peak, average, torque at time T, etc.).
It is equipped with a special sensor recognition system. This means that a single instrument can read different sensors (several capacities, Force
or Torque).
Furthermore, it is possible to freeze its configuration to avoid handling errors.
It is the most versatile instrument designed for all tests in industrial surroundings.
|
|
|
The DRBT-100 bench mount torque tester has a wide torque measurement range and come complete with two spring rundown joints and a protective carrying case. The tester can store 800 data points and allows the user to enter high / low torque limits for Good/NG indication during testing. Built-in statistical calculations allow the user to review min, max, and average values for a series of up to 30 torque readings.
|
|
This newly designed, numerical control torquemefer is capable of carrying out right-hand and left-hand torsion tests including at break.
It can be mounted till three different torque-celles always mounted and ready to work.
It is a freestanding structure with precision ball-type guides.
It is supplied with a computer and touch screen with new 24-bit microcontroller. Our system uses severo/ cards to control the axes, sensor, and cells that are connected via CanBus to enable displacements to position or force at a feedback speed of 1000 Hz. Load cell reads are effected 1,000 times per second. Minimum indexing is 1/32,700 (this can be increased on request).
|
|
Features and Benefits
This Electronic Torque Meter/Calibrator is an all-in-one unit can be used as both an accurate torque wrench and as an accurate torque tool tester
Easy to learn and use
Four to eight times more accurate than a conventional torque wrench or tester
Accuracy to .5% with bench mounted transducers
"Plug and play" torque transducers
Versatile all-in-one unit can be used as both an accurate torque tool tester
First peak of torque mode allows hand calibration of click type torque wrenches
Memory for traceability
Standard rechargeable 9 volt battery
Product Details
Height 1-1/4"
Length 7-1/4"
Width 3-1/4"
|
|
|
|
|
|
Measuring System PHYSIMETER® 906 MC-B
The measuring system PHYSIMETER® 906 MC-B has been designed for the determination of the mechanical parameters force or torque on the basis of wire strain gauges. The instrument can be supplied with an integrated or an external sensor. For the power supply a block battery of 9 V is required (standard article) or alternatively a plug-in power pack (option). For easy handling the instrument is provided with the functions On/Off, reset and indication of peak value (upper and lower measuring value). In the standard version of the instrument the load introduction takes place at the bottom. Upon request, the load introduction can also be effected on the top of the instrument. The ergonomically designed housing, made of anodised, high-strength aluminium, is provided with threaded bores at the front side so that an unproblematic connection to the ERICHSEN testing machines is guaranteed - as it was also ensured when using the preceding models of the tensile and pressure testing instruments. The instrument is perfectly suitable for mobile as well as for stationary applications.
|
|
- Ergonomically-designed and advanced style.
- Rugged die-cast aluminum housing excellent for noise protection.
- Various output functions (For models with the functions only).
- Peak-hold function for all models.
- Various functions unique to the digital gauges.
- Various attachments and a carrying case.
|
|
The MTA is a hand-held Torque/Angle Analyser suitable with all our transducers (NST, B and SB models). Easy to start and use it offers tool testing, graphing capabilities and a graphical menu for easy navigation.
The MTA allows you to set up and create tool tests and save the readings so that you can export the data to a PC for documentation.
It’s the ideal solution for organizing and storing test data for ISO and SPC documentation.
|
|
It is a torque checker to control electric screwdriver, air driver, and torque driver.
The measuring joints included with I-8 series and never like as ordinary screwed ones but brings you a stable measurement by its low friction. Needlessness to rewind the joint helps you to saves a lot of time.
|
|
Verify torque settings and repeatability of hand tools, power tools, and pulse tools.
Features:
Dual transducers for testing a broader range of torque
Three modes of processing torque signals:
1. Peak: records & displays highest torque peak
2. First Peak: records & displays first torque peak
3. Track: displays all torsional strain applied to transducer in real time
|
|
CS1 series offers variable models with full scale of +/- 10 Nm à +/- 2000 Nm
* Easy to install
* Sensitivity ± 1.5 mV/V
* Reapetability ± 0.1 %
* Linearity and hysteresis ± 0.25 %
* Fixing by threadings
* Protection IP54 or IP67
Applications :
* Measure of static couple
* Screw drivers tools.
|
|
In connection with PE- (Piezo Electric) or DMS (Strain Gage) Transducers, our torque-measuring imstruments permit the:
- Torque-Adjustment, Supervision and Control of rotational Screwdrivers
- Control and Calibration of Hand-Torque-Wrenches
- Torque-Control of stationary Screwdriver-Spindles mounted in an assembly station
- Torque-Verification and Documentation of the assembly quality
All measuring instruments of the series DME allow the truly high-dynamic measurement of torque-values, when used in connection with the corresponding transducers. They are intended for the manual use in different application-areas, such as: supervision, control and torque-adjustment of screwdrivers; control and calibration of mechanical torque-wrenches; control of integrated -screwdriver-spindles and finally for verification and documentation of the assembly-quality in acordance with DIN EN ISO 9001 quality requirements.
|
|
The Torque Checker is an equipment for control of transferrable torque in toolholders of types Hydralic-, Shrink- or Collar chucks.
Increase your production and produce with high security by using the Torque Checker
Torque Checker will avoid:
- Damaged parts
- Damaged tools
- Damage of the machine
|
|
|
TorqueStar Opta is the equipment of choice for the measurement and collection of torque data in the manufacturing environment. TorqueStar Opta's range of software features can be individually specified to give a configuration most suited to the requirement, from a simple no-frills readout to a comprehensive audit tool with display of torque curves and specialist measurement routines.
|
|
BalTec (UK) Ltd can offer a wide range of torque measuring equipment, from 0.1 Nm to 200 Nm, especially designed for easy calibration of your tightening tools along the assembly line or in the laboratory.
Doga torque equipment will improve your manufacturing quality and is suitable with screwdrivers and torque wrenches.
Model EZ20 Torque Tester
- Measuring range 0.1Nm - 20Nm.
- Accuracy +/- 0.5%.
- 500 measuring memories.
- Manual and auto reset.
- RS232 output for PC transfer.
- Mini/OK/maxi torque limits.
- Peak - first peak - track signals
|
|
The ANDITORK bottle or jar opening tester is specially designed to measure opening torques for bottles and jars. It is equipped with a grip plate that holds products from 10 mm to 200 mm in diameter. The rubber-coated gripping fingers are adjusted quickly using a travel knob. Torque readings can be made by tightening or loosening it, and the RS232 output can be used to save the data to a PC.
If the cap has a safety ring, the test can be carried out using the ANDITORK Star, which measures both the break (first peak) and the opening torque (max torque).
|
|
|
|
|
|
Desktop-torque meter with memory and output signal for checking the opening and close torque of screw caps of bottles, glas jars, cosmetics etc.
For applications in beverage, cosmetic and pharmaceutical industry etc.
Measuring range 0 - 2.000 Nm / 5.000 Nm / 10.00 Nm
Resolution 0.001 Nm / 0.01 N
- 2 selectable modes: Real Time: to display load transients
Peak: to capture the peak force achieved during a test
- Display the opening or closing torque (clockwise and counterclockwise torque)
- 3 selectable units: Nm, kgfm, Lb.in or Ncm, kgfcm, Lb.in
- Clambs containers from Ø 20 to 180 mm (smaller Ø on request)
- Programmable high/low setpoints for go/no-go testing with color-coded indicators (orange, green, red) in the LED display and relais outputs
- Storage of 1000 values for recall:
· on the display
· for data transfer to a PC
· for printing with report
- Torque measuring unit with high internal measuring frequency
- 3 output signals: RS 232, analog, Mitutoyo Digimatic
- 2 Models: - DTX2A mains operation
- DTX2B battery and/or mains operation
- Torque meter for fast, accurate measuring
- High repeatability
- Easy to use
- Manufacturers certificate with measured values is included
|
|
|
|
|
|
Mecmesin's range of manually-operated Digital Torque Testers provide a simple and cost effective method of measuring low-level torques.
From packaging and toys, to high-tech automotive controls and medical devices, Mecmesin testers can help assesses the quality and usability of any rotating component.
Orbis
Perfect for any small rotary component, this rugged, lightweight and portable tester is ideally suited to both laboratory and production environments. The versatile mounting table sits atop an integrated digital torque sensor and grips the base of your sample.
The tester features high sampling-rate electronics for accurate peak torque capture, offering a greater level of accuracy than mechanical spring-type testers.
Summary.
Clockwise & Counter-clockwise Digital Torque Capture
Compact, Portable & Affordable
Clear Digital Display & Intuitive Controls
6N.m (50 lbf.in) Capacity
Water Resistant (rated to IP54)
Data Output for Easy Export of Results
Mains or Battery Powered
Versatile Mounting Table
Graphical interrogation of results with Dataplot Software.
Tornado
The Tornado features the same basic design and functionality as the Orbis tester, but with a range of advanced features, including pass/fail alerting, on board memory and a tamper-evident closure testing facility. The Tornado is also available in a range of capacities from 1.5N.m to 10Nm.
Tornado features.
Range of Capacities; 1.5N.m (13lbf.in), 3N.m (26lbf.in), 6N.m (50lbf.in), 10N.m (90lbf.in)
On-board Memory; up to 500 readings
Audible/Visual Tolerance Alerting
Tamper-evident Closure Testing; Characterise Both'Slip'& 'Bridge'Torques
|
|
DTX2 series are torque measurement system for the screw-caps of cosmetic, food and beverage containers.
The operation is very simple and it is possible to achive high repeatability and accuracy.
|
|
The TMI series cap torque testers includes low cost measuring instruments to capture two directional PEAK forces as well as sophisticated devices with data memory, USB output and USB Flash-Card connection to store data. The high-end versions are able to capture multi peak in order to check pilfer proof caps.
> 0,5% accuracy and 1000Hz Peak detection
> Multi-Peak for pilfer proof caps
> Rugged, heavy and splash water proof (IP44)
> Memory and USB-Interface
> OK/NG-indication with colored LED's
> Interface for USB-Flash Card
|
|
|
|
|
|
CapStar II is a simple and easy to use digital torque tester. The accurate information provided can then be stored in the internal memory, and downloaded to a printer or computer.
The LCD digital read-out clearly displays the peak torque of each test. Preferred units of measurement may be selected from a list of seven options. Statistical analysis of sigma, mean and range is also available when the data is printed out.
Container to be tested are located in adjustable jig capable of clamping circular or custom bottles and jars from 10 mm to 130 mm in diameter. Child resistant closures, much used in the pharmaceutical industry, can also be tested.
CapStar II is housed in a rugged, drip proof ABS housing with wipe-clean, touch sensitive controls. CapStar II is portable, battery powered and can be used with an optional mains battery charging unit. The screen displays a warning when the batteries need replacing or charging.
To save power CapStar II switches off automatically if no key is pressed within a specified pre-set period.
|
|
| ... products without technical information |
| |
|
|
