|
|
The ANDITORK bottle or jar opening tester is specially designed to measure opening torques for bottles and jars. It is equipped with a grip plate that holds products from 10 mm to 200 mm in diameter. The rubber-coated gripping fingers are adjusted quickly using a travel knob. Torque readings can be made by tightening or loosening it, and the RS232 output can be used to save the data to a PC.
If the cap has a safety ring, the test can be carried out using the ANDITORK Star, which measures both the break (first peak) and the opening torque (max torque).
|
|
|
|
|
|
Desktop-torque meter with memory and output signal for checking the opening and close torque of screw caps of bottles, glas jars, cosmetics etc.
For applications in beverage, cosmetic and pharmaceutical industry etc.
Measuring range 0 - 2.000 Nm / 5.000 Nm / 10.00 Nm
Resolution 0.001 Nm / 0.01 N
- 2 selectable modes: Real Time: to display load transients
Peak: to capture the peak force achieved during a test
- Display the opening or closing torque (clockwise and counterclockwise torque)
- 3 selectable units: Nm, kgfm, Lb.in or Ncm, kgfcm, Lb.in
- Clambs containers from Ø 20 to 180 mm (smaller Ø on request)
- Programmable high/low setpoints for go/no-go testing with color-coded indicators (orange, green, red) in the LED display and relais outputs
- Storage of 1000 values for recall:
· on the display
· for data transfer to a PC
· for printing with report
- Torque measuring unit with high internal measuring frequency
- 3 output signals: RS 232, analog, Mitutoyo Digimatic
- 2 Models: - DTX2A mains operation
- DTX2B battery and/or mains operation
- Torque meter for fast, accurate measuring
- High repeatability
- Easy to use
- Manufacturers certificate with measured values is included
|
|
|
|
|
|
Mecmesin's range of manually-operated Digital Torque Testers provide a simple and cost effective method of measuring low-level torques.
From packaging and toys, to high-tech automotive controls and medical devices, Mecmesin testers can help assesses the quality and usability of any rotating component.
Orbis
Perfect for any small rotary component, this rugged, lightweight and portable tester is ideally suited to both laboratory and production environments. The versatile mounting table sits atop an integrated digital torque sensor and grips the base of your sample.
The tester features high sampling-rate electronics for accurate peak torque capture, offering a greater level of accuracy than mechanical spring-type testers.
Summary.
Clockwise & Counter-clockwise Digital Torque Capture
Compact, Portable & Affordable
Clear Digital Display & Intuitive Controls
6N.m (50 lbf.in) Capacity
Water Resistant (rated to IP54)
Data Output for Easy Export of Results
Mains or Battery Powered
Versatile Mounting Table
Graphical interrogation of results with Dataplot Software.
Tornado
The Tornado features the same basic design and functionality as the Orbis tester, but with a range of advanced features, including pass/fail alerting, on board memory and a tamper-evident closure testing facility. The Tornado is also available in a range of capacities from 1.5N.m to 10Nm.
Tornado features.
Range of Capacities; 1.5N.m (13lbf.in), 3N.m (26lbf.in), 6N.m (50lbf.in), 10N.m (90lbf.in)
On-board Memory; up to 500 readings
Audible/Visual Tolerance Alerting
Tamper-evident Closure Testing; Characterise Both'Slip'& 'Bridge'Torques
|
|
DTX2 series are torque measurement system for the screw-caps of cosmetic, food and beverage containers.
The operation is very simple and it is possible to achive high repeatability and accuracy.
|
|
The TMI series cap torque testers includes low cost measuring instruments to capture two directional PEAK forces as well as sophisticated devices with data memory, USB output and USB Flash-Card connection to store data. The high-end versions are able to capture multi peak in order to check pilfer proof caps.
> 0,5% accuracy and 1000Hz Peak detection
> Multi-Peak for pilfer proof caps
> Rugged, heavy and splash water proof (IP44)
> Memory and USB-Interface
> OK/NG-indication with colored LED's
> Interface for USB-Flash Card
|
|
|
|
|
|
CapStar II is a simple and easy to use digital torque tester. The accurate information provided can then be stored in the internal memory, and downloaded to a printer or computer.
The LCD digital read-out clearly displays the peak torque of each test. Preferred units of measurement may be selected from a list of seven options. Statistical analysis of sigma, mean and range is also available when the data is printed out.
Container to be tested are located in adjustable jig capable of clamping circular or custom bottles and jars from 10 mm to 130 mm in diameter. Child resistant closures, much used in the pharmaceutical industry, can also be tested.
CapStar II is housed in a rugged, drip proof ABS housing with wipe-clean, touch sensitive controls. CapStar II is portable, battery powered and can be used with an optional mains battery charging unit. The screen displays a warning when the batteries need replacing or charging.
To save power CapStar II switches off automatically if no key is pressed within a specified pre-set period.
|
|
| ... products without technical information |
| |
The LCT-01 is the world's most popular portable Load Cell Tester.
It is a stand-alone portable hand-held device that was especially designed to help technical people immediately analyze the condition of strain-gage based load-cells.
The LCT fits all common types of load-cells available in the market today: four wires, 6 wires (with sense) and all rated gain outputs.
It provides the user with the essential data needed about the conditions of the tested load-cell, such as physical distortion (possibly caused by overload, shock load or metal fatigue), and electrical conditions (bridge resistance, shielding and resistance to ground).
The LCT allows the user to test the load-cell whether it is installed or removed. The unit is fully computerized and battery operated. A 16 x 2 alphanumeric LCD display guides the operator through all test stages and clearly displays the results.
|
|
|
For axial loads, load cells are commonly used. Where a standard cell is not available or will not perform, Teledyne Brown may be of assistance. We will design and manufacture a Custom Load Cell to unique requirements such as harsh environments, limited space, or high-overload conditions.
|
|
|
Load Pin Transducers (also known as Shear Pin Sensors) measure loads using a strain gage element sensitive to shear loads. Using a laboratory calibration traceable to NIST, shear strain is related to load. Typical sizes range from 5/8 inch to 3.5 inch diameter. Two-component output is available for applications where loads are in the X & Y planes.
|
|
|
It is often the case that torque in a rotating shaft can be measured with a stationary, reaction torque sensor at some point in the powertrain. This is due to the existence of an equal and opposite force (torque) necessary to hold the drive and driven equipment in place.
|
|
|
Bonded foil strain gages are the time-honored standard for measuring torque and force on mechanical components. Based on many years of experience with this proven technology, Teledyne Instruments offers a variety of torque sensors and load cells for factory, laboratory, and field testing.
|
|
|
|
|
|
A&D's pipette accuracy testers provide a simple, precise, and cost-effective means for managing the accuracies of your pipettes by yourself.
The testing procedure is based the gravimetric method, which is the most commonly used test for the accuracy of variable-volume pipettes and is recommended by the ISO8655. In the gravimetric method, pipette volume is determined based on the mass value of the distilled water dispensed from the pipette. The high precision, accuracy, and speed of A&D's balances therefore ensure as effective testing as possible.
A&D’s pipette accuracy testers are equipped with various devices to facilitate your testing. Firstly, the evaporation trap, which prevents the evaporation of the dispensed water by maintaining high humidity inside, can minimize errors due to loss of evaporation. Secondly, the entire pipette accuracy tester set can be packed in a portable carrying case. This makes it easy to perform tests on-site, instead of collecting all the pipettes at one site for testing. Finally, the WinCT-Pipette software automatically converts mass values into volumetric values using the liquid temperature and barometric pressure previously entered. It is also possible to print an A4 or letter-size report including test conditions, data, judgment results, etc.
Three models are available depending on what volumetric range is to be measured. With A&D’s pipette accuracy tester, you can now easily and correctly screen out pipettes that need adjusting or repairing, eliminating the unnecessary costs of having all your pipettes inspected regularly by an outside contractor.
Please see the Pipette Accuracy Testers catalog for further details.
|
|
|
|
|
|
Laboratory volume standard Seraphin Test Measures
Laboratory Measures Series C: Bottom Drain Slicker Plate Measures
These small drain bottom measures are designed specifically for accurate testing of small meters and testing the accuracy of other measures in a metrology laboratory. Specifications and outstanding features include a neck that is machined perpendicular to axis so that excess liquid can be sheared off by sliding a slicker plate across the top of the neck; a stainless steel quick closing butterfly drain valve and an overflow trough.
High Accuracy Neck Series M: Bottom Drain Graduated Neck Measures
These small drain bottom measures are The "High Accuracy" type neck has at least 1.5% of the prover volume and a smaller diameter to achieve greater neck volume resolution. This Series M Prover has all the outstanding features of the Series J. Due to the greater resolution it is a favorite of laboratory meterologists. Seraphin® Series M provers come standard with a three piece S/S ball valve. Our Series M & C provers are sent to a NVLAP facility for calibration to assure NIST traceability with uncertainty values. Other types of calibration are available.
|
|
|
Moving up in the heavyweight class, Seraphin® produces heavy duty provers for testing tank trucks, containers, testing tanks and large volume meters. These are all made with the same accuracy and attention to detail and quality as the smaller test measures. A prover has a bottom drain and a graduated neck . Seraphin® provers are easy to use, reliable, and low cost way to measure the output accuracy of liquid metering equipment. All Seraphin® provers are manufactured of type 300 Stainless Steel eliminating the interior coating required of carbon steel models and therefore are corrosion resistant over an indefinite period of time. Many Seraphins® are still in use after decades of use. They are built and calibrated to the latest OIML R-120, Measurement Canada, API and NIST handbook 105-3 standards. Seraphin's® provers are used world wide and are considered the de-facto leader in the industry.
|
|
|
The Seraphin skid prover system is made up of a precision volumetric stainless steel Prover connected to a pump-off system and mounted on skid. The prover drain valve is plumbed to piping that can be routed via butterfly valves to a gravity drain or to the pump. A manual hose reel, with hose and nozzle, is connected to the pump. The hose is used to route the petroleum to an above ground storage tank or up into a tank truck.
|
|
TMC Modal Shaker
To provide the turnkey Modal test solutions to our customers,
TMC Solution produces the components for the total modal
test system,including the impact hammers,signal generators,
accelerometers,signal conditioners,modal shakers,modal
power amplifiers,High speed dynamic data acquisitions and
Analysis systems,etc.
TMC Solution offers series of modal shakers from 10N to
1,000N,specially designed for the vibration environment
testing and modal analysis.To excite high efficient thruster
force,shakers are driven by rare-earth permanent magnets.
The special design of the modal shakers is characterized
by wide usable frequency,long stroke,light weight,smart size.
Features:
Wide Frequency Range
Light weight,smart size
High Efficiency,rare-earth magnets
Use as small scale vibrator or modal shaker
Applications:structural vibration experiments,dynamic structural simulations,fatigue testing of
parts,modal test/finite element modal analysis
|
|
|
|
|
|
The OROS 3-series analyzers are flexible enough to handle your measurement, whatever the application. These instruments overcome most of the measurement obstacles with their wide frequency span from milliHertz to 40 kHz and the extensive 140 dB dynamic range. Thanks to these attributes, OROS 3-Series analyzers are the right choice for all your NVH activities.
Whatever the method you are using, Impact hammer or SiMo/MiMo shaker excitations, FRFs are acquired confidently. A set of innovative tools such as node path sequencer and preview of averaged coherence dramatically speeds up modal data acquisition.
Acquire, Store, Analyze and Report is your everyday work in noise and vibration tests and R&D? Automotive, Aerospace, Consumer, Industry and Energy are demanding domains where you get more and more data to measure while delays for the results delivery are getting shorter. Focusing on your time to result challenge, OROS offers breakthrough noise and vibration analyzers, the OROS 3-Series. From 2 to 32 channels these comprehensive instruments offer powerful real-time analyses associated with a disk data recorder packaged in portable and professional units.
|
|
Vibration Analysis
Component vibration design requires full-field information of single component and assembly modes.
The Dantec Dynamics vibration measuring systems replace single point accelerometers and sensor attachment, or mass loading, delivers three dimensional vibration modes including in- and out-of plane components of the vibration within seconds after the test.
3D High Speed Correlation System Q-450
Dynamic measurements of full-field 3D displacements
and subsequent analysis of strains.
3D Vibro-ESPI System Q-500
Enables complete 3 dimensional and highly sensitive vibration analysis of almost any component.
|
|
The most cost-effective, accurate, powerful entry into Structural Analysis available today.
Bobcat, built for:
Vibration Analysis
Transient Analysis
Acoustical Analysis
Modal Analysis with enhanced features
Swept Sine Analysis, with Tracking Filters
Signal Analysis with optimal displays
Simply making accurate measurements
|
|
ocket Colorimeter II Filter Photometer, user-programmable, 420 nm filter.
Generic Pocket Colorimeter II Instruments are intended for applications not included in standard analysis systems. They are available in a range of wavelengths appropriate for many custom calibrations. In addition to the factory absorbance calibration (0-2.5 A), the instruments offer two user-entered, two-point, linear calibrations, and provide a choice of either 0.00 to 2.55 or 0.0 to 99.0 for the display value.
|
|
This top-of-the-range multi-parameter photometer can save you time and money. If you need a simple, but professional meter measuring the most important constituents of water, especially in pools and spas, then the HI 93101 has been designed for you.
The housing of the HI 93101 has been designed to perfectly fit into the palm of your hand.
The meter weighs less than 300 grams and has a long battery life, ideal for spot checks. The microprocessor gives a low battery warning and shuts off the meter after 10 minutes.
HI 93101 measures bromine, cyanuric acid, iron, iodine, pH, free chlorine and total chlorine.
|
|
|
|
|
|
The model 68-50 Brightness & Color Meter makes measurement of brightness, color and opacity affordable in Production and QC applications. The Brightness & Color Meter measures color, color purity, degree of yellowness, degree of whiteness, color matching and color fastness. The TMI Brightness and Color Meter operates in accordance with CIE Publication No. 15.2 “Standard of Colourimetry” and was designed to meet ISO, ASTM, TAPPI and other International Standards.
APPLICATIONS
Applications of the instrument include paper, pulp, packaging, nonwoven, textile dyeing and printing, color printing, construction materials and ceramics, chemicals, paints, medicines, food, recycled pulp products and mineral industries.
FEATURES
* Large alpha-numeric display
* Single-button simplicity of operation
* RS-232 data output
* Stores up to 99 readings; auto-calculates mean value
* Built-in Printer
SPECIFICATIONS
* CIE 1931 (2 degrees)
* CIE 1964 (10 degrees)
* ISO 2469, 2470, 2471
* ISO 5631.1
* ISO 9416
* Tristimulus values: <1.00
* Chromaticity coordinates: <0.0100
* Xenon lamp provides diffused illumination in 30mm window in 150mm dia integrating sphere
* Illumination observation condition: Illumination d/o according to ISO 2469 is adopted, i.e. integrating sphere (150mm in diameter)diffused illumination on sample with vertical reception.
* Color measurement standard: Tristimulus values, CIE 1964/10°and CIE 1931/2°standard observer.
* Light source for colour measurement: Pulsed xenon lamp to simulate illuminant D65 and C, instantaneous illumination on sample with UV regulator.
* Measurement port: 30mm in diameter.
|
|
H Series Vibration Test System(water-cooled)
The H Series vibration testing system is ideal for screening of large sized
assemblies with high acceleration test requirements.The H series also
meets typical vibration test requirements of other large sized electronic
assemblies,automotive parts,aviation,avionics parts,satellites,aerospace
and millitary systems.The H series vibration is designed to meet millitary
and international test standards including MIL,ASTM,IEC,ISO,BS and JIS.
A wide diameter armature with high cross axial stiffness will allow for using
a proportioned head expander to test mulitiple specimens simultaneously
yet achieving good vibration transmissibility ratio.Other test requirements
including transportation vibration simulations for large size components
can easily be fulfilled by the H series.Options are available to meet
the most stringent test requirements for hazardous or explosive materials.
|
|
|
|
|
|
Series Vibration Test System
The ‘M1’ Series vibration testing system is ideal for screening of
small size assemblies with high acceleration test requirements and
can also meet typical vibration test requirements of other medium
sized electronic assemblies, automotive components, road navigation
units and home appliances. The ‘M1’ Series is designed to meet
military and international test standards including MIL, ASTM, IEC,
ISO, BS and JIS. A wide diameter armature with high cross axial
stiffness when coupled to proportional head expander to test
multiple specimens simultaneously yet achieving a good vibration
transmissibility ratio. Other test requirements including
transportation vibration simulation,combined vibration-environmental
test and seismic simulations for small size components can easily be
fulfilled by the ‘M1’Series.
Features
The Performance:
Specimen payload to 500kg(1,100lbs)
Excellent random performance meeting ISO standard with 3 sigma peak current rating
Armature diameters range from 240mm to 370mm(9.5 inch to 14.6inch)
Up to 51mm(2 inch) continuous displacement(pk-pk)
Test frequency up to 3,000 Hz
The Shaker:
Rugged trunnion design with bearing guidance
Air bag or elastomer isolator built-in reducing dynamic floor stress
Dual layer reinforced armature for high acceleration performance
Roller-truss flexure suspension system with high cross axial stiffness
The Amplifier:
Integrated with high performance amplifier
Modular designed amplifier
12 KVA power module with two self-reliant compact 6KVA sub-modules
High modulation switching frequency
High signal to noise ratio
Low total harmonic distortion
Individual power module operation indication light
|
|
| ... products without technical information |
| |
|
Test laboratories are confronted by a huge range of electrical and electronic products with vastly differing power requirements. Frequency and voltage combinations not available from the mains power outlet. Test samples that cause inadequate supplies to cave-in under load. PS3, from EMC PARTNER, solves these problems instantly. Convert the mains wall plug into a custom AC and DC power supply, changeable at the push of a button to any pre-selected frequency or voltage combination.. PS3 is flexible enough to perform EMC immunity tests for CE mark compliance yet stable and robust enough to drive magnetic field antennas. PS3 can be used for industrial, telecom, transport and a host of other applications. An innovative design incorporating the very latest technology, PS3 gives the right power right when it’s needed.
|
|
|
|
|
|
The GX1838 provides 8 output channels and three Voltage Rails. Each of the 8 output channels can be connected to one of the three voltage rails or set as Open. Voltage Rails A through C are used as voltage sources for the High and Low state. Additionally, the GX1838 offers a programmable DC electronic load capable of loading up to 500mA. The GX1838 occupies a single 3U PXI slot.
The GX7400 is a dual output programmable DC power supply designed for use in PXI systems. The GX7400 occupies three 6U slots and is controlled via the PXI bus. The AC power is provided using a panel mounted receptacle. The power supplies are fully isolated and can be externally connected in series to provide higher voltage. Each of the dual outputs can accommodate a programmable or a fixed power supply module.
The GT7404 is a low cost method of providing controlled power to interface and test target circuitry. The GT7404 permits +5V, +12V, -5V, and -12V power outputs present on the GTXI motherboard to be switched through a DB25 connector for use by the unit under test and interface circuitry.
|
|
The newest member to Hanna instruments Combo series of combination waterproof testers with advanced functions is HI 98121, designed for simultaneous pH and ORP measurements.
HI 98121 also reads temperature, which is continuously displayed on the dual level LCD.
An encapsulated external stainless steel sensor, positioned in close proximity to the pH electrode provides fast response. A fiber junction can be easily pulled out and replenished. And when finally spent, the pH electrode cartridge can be quickly replaced with the supplied electrode removal tool, reducing waste and cost.
HI 98121 works with common batteries and when turned on, displays the percentage of remaining battery life. The stability indicator ensures reliable readings.
Ergonomically designed for ease in handling, this meter will float if inadvertently dropped into water.
|
|
Feature:
- Microprocessor based for fast and accurate measurements.
- Special viewing angle designed of waterproof housing IP 67 rated.
- Large LCD display pH or Conductivity and Temperature Simultaneously.
- Simple to calibrate by one keyboard and automatic temperature compensation.
- Multi-functions with Data-hold, Max/Min and shows PTS after calibration.
- Low battery and consumption indicator. Auto power shut off after 10 minutes of non use.
- Easy to replace electrode module and the type of electrode would be recognized automatically and shown in display during insertion.
|
|
|
|