|
|
The ANDITORK bottle or jar opening tester is specially designed to measure opening torques for bottles and jars. It is equipped with a grip plate that holds products from 10 mm to 200 mm in diameter. The rubber-coated gripping fingers are adjusted quickly using a travel knob. Torque readings can be made by tightening or loosening it, and the RS232 output can be used to save the data to a PC.
If the cap has a safety ring, the test can be carried out using the ANDITORK Star, which measures both the break (first peak) and the opening torque (max torque).
|
|
|
|
|
|
Desktop-torque meter with memory and output signal for checking the opening and close torque of screw caps of bottles, glas jars, cosmetics etc.
For applications in beverage, cosmetic and pharmaceutical industry etc.
Measuring range 0 - 2.000 Nm / 5.000 Nm / 10.00 Nm
Resolution 0.001 Nm / 0.01 N
- 2 selectable modes: Real Time: to display load transients
Peak: to capture the peak force achieved during a test
- Display the opening or closing torque (clockwise and counterclockwise torque)
- 3 selectable units: Nm, kgfm, Lb.in or Ncm, kgfcm, Lb.in
- Clambs containers from Ø 20 to 180 mm (smaller Ø on request)
- Programmable high/low setpoints for go/no-go testing with color-coded indicators (orange, green, red) in the LED display and relais outputs
- Storage of 1000 values for recall:
· on the display
· for data transfer to a PC
· for printing with report
- Torque measuring unit with high internal measuring frequency
- 3 output signals: RS 232, analog, Mitutoyo Digimatic
- 2 Models: - DTX2A mains operation
- DTX2B battery and/or mains operation
- Torque meter for fast, accurate measuring
- High repeatability
- Easy to use
- Manufacturers certificate with measured values is included
|
|
|
|
|
|
Mecmesin's range of manually-operated Digital Torque Testers provide a simple and cost effective method of measuring low-level torques.
From packaging and toys, to high-tech automotive controls and medical devices, Mecmesin testers can help assesses the quality and usability of any rotating component.
Orbis
Perfect for any small rotary component, this rugged, lightweight and portable tester is ideally suited to both laboratory and production environments. The versatile mounting table sits atop an integrated digital torque sensor and grips the base of your sample.
The tester features high sampling-rate electronics for accurate peak torque capture, offering a greater level of accuracy than mechanical spring-type testers.
Summary.
Clockwise & Counter-clockwise Digital Torque Capture
Compact, Portable & Affordable
Clear Digital Display & Intuitive Controls
6N.m (50 lbf.in) Capacity
Water Resistant (rated to IP54)
Data Output for Easy Export of Results
Mains or Battery Powered
Versatile Mounting Table
Graphical interrogation of results with Dataplot Software.
Tornado
The Tornado features the same basic design and functionality as the Orbis tester, but with a range of advanced features, including pass/fail alerting, on board memory and a tamper-evident closure testing facility. The Tornado is also available in a range of capacities from 1.5N.m to 10Nm.
Tornado features.
Range of Capacities; 1.5N.m (13lbf.in), 3N.m (26lbf.in), 6N.m (50lbf.in), 10N.m (90lbf.in)
On-board Memory; up to 500 readings
Audible/Visual Tolerance Alerting
Tamper-evident Closure Testing; Characterise Both'Slip'& 'Bridge'Torques
|
|
DTX2 series are torque measurement system for the screw-caps of cosmetic, food and beverage containers.
The operation is very simple and it is possible to achive high repeatability and accuracy.
|
|
The TMI series cap torque testers includes low cost measuring instruments to capture two directional PEAK forces as well as sophisticated devices with data memory, USB output and USB Flash-Card connection to store data. The high-end versions are able to capture multi peak in order to check pilfer proof caps.
> 0,5% accuracy and 1000Hz Peak detection
> Multi-Peak for pilfer proof caps
> Rugged, heavy and splash water proof (IP44)
> Memory and USB-Interface
> OK/NG-indication with colored LED's
> Interface for USB-Flash Card
|
|
|
|
|
|
CapStar II is a simple and easy to use digital torque tester. The accurate information provided can then be stored in the internal memory, and downloaded to a printer or computer.
The LCD digital read-out clearly displays the peak torque of each test. Preferred units of measurement may be selected from a list of seven options. Statistical analysis of sigma, mean and range is also available when the data is printed out.
Container to be tested are located in adjustable jig capable of clamping circular or custom bottles and jars from 10 mm to 130 mm in diameter. Child resistant closures, much used in the pharmaceutical industry, can also be tested.
CapStar II is housed in a rugged, drip proof ABS housing with wipe-clean, touch sensitive controls. CapStar II is portable, battery powered and can be used with an optional mains battery charging unit. The screen displays a warning when the batteries need replacing or charging.
To save power CapStar II switches off automatically if no key is pressed within a specified pre-set period.
|
|
| ... products without technical information |
| |
|
This tester can perform the continuous DTUL or VSP test automatically for 120 specimens by the robotized mechanism.
|
|
RKA 5
Automatic Softening-Point Test according Ring & Ball Method
Ready-to-Go Unit to determine the temperature at which a substance attains a particular degree of softness.
Suitable for bitumen & bituminous binders, filler aggregates used in bituminous mixtures, binders for paints and varnishes and resins derived from naval stores.
|
|
TMI's Melt Flow Indexer is a NEW and AFFORDABLE tabletop instrument that tests the melt flow resistance (MFR) of a wide range of thermoplastics. The tester conforms to all National and International melt flow resistance standards, including BS EN ISO 1133 and ASTM D1238. Any temperature within 120°C-450°C (248°F-842°F) can be accurately controlled.
FEATURES
- Built-in microprocessor maintains temperature control to within ±0.2ºC (±0.4ºF), with rapid ramp-up to set point.
- Temperature fluctuation is ±1% of set temperature.
- Extruded material automatically cut-off by built-in scraper mechanism at preset intervals, ontrollable to ±0.01 seconds.
- Clear multi-line LCD display and tactile-feedback membrane keypad allow fast, accurate input of test parameters and provide continuous display of settings during testing.
|
|
Centering Testers
Quick and precise setting
- High accuracy of < 2 ìm
- Stationary dial gauge
- High-quality components
- Precise kinematics
- Available in three different models: C0-S, C0 and CIII
|
|
Now in its fourth generation, the Loom Laser series Thread-Break Detection system uses cutting-edge laser and microprocessor technology to provide protection from thread breaks in any weaving environment.
Thread breaks are detected when the CPU senses small changes in the light received by the photocell (receiver). The system is programmed to differentiate between actual thread breaks and false signals generated, for example, when a dust particle or an insect passes through the beam.
Lasers can be strategically placed at critical points-the whiproll, back shed, front shed, or on the lay-to give complete thread-break coverage.
The advanced capabilities of the LL-2000 Loom Laser can detect threads as small as 30 microns on looms operating between 120 and 600 rpm. At the same time, the system is immune to changes in ambient light, and can withstand vibrations up to 14mm in amplitude at the surface of the receiver sensor.
|
|
|
The OBR 4400 takes the industry's first ultra-high resolution OTDR with backscatter-level sensitivity designed for component- and module-level reflectometry to the next level. With a small, easily transportable platform, the capability to "see" reflections out to 2 kilometers with no dead zone, and integrated temperature and strain sensing, the OBR 4400 gives you the ultimate in fiber diagnostics. The OBR 4400 uses swept-wavelength coherent interferometry to measure minute reflections (< 0.0003 parts per billion) in an optical system as a function of length with spatial resolution less than 50 microns. This provides the user with precision reflectometry and unprecedented optical-module inspection and diagnostic capabilities by providing the ability to locate and troubleshoot splices, connectors, fiber bends and breaks, insertion loss points, track polarization, verify PM components and more.
|
|
Up to 24 channels of Return Loss Measurement. The high resolution reflectometer measures Return Loss from 10dB to 72dB.
The OP930 supports a CW source mode. For the Return Loss measurement the laser sources are pulsed in the nanosecond region. For certain measurements a continuous modulated (CW) light signal is a required.
|
|
The most versatile, complete light source available with up to three singlemode wavelengths on a single port, or four wavelengths (two multimode and two singlemode) on two ports.
Applications
Link-loss characterization
Fiber identification
Key Features and Benefits
Can transmit with a wavelength-identification digital encrypted protocol so that any compatible unit can automatically use the proper calibration parameters
Autonomy of 120 hours
Instrument identification available in six languages
Highest output power in the industry
Three-year warranty and recommended calibration interval, for dramatically reduced cost of ownership
|
|
|
|
|
|
Features :
* 8 channels of user-selectable laser source modules
* ±3pm wavelength stability with ±0.003dB power stability
* Customer specified WDM DFB sources covering S, C, and L-bands at up to 20mW per channel
* Internal synchronous modulation to 500kHz
* Fiber optic switch modules available
* GPIB/IEEE488 and RS-232 interfaces
The FOM-7900B is a high-performance fiber-optic test and development platform with eight channels supporting plug-in laser source and fiber optic switch modules. This system provides a cost-effective solution for WDM and CWDM test applications including EDFA, SOA, and fiber optic component characterization.
Front panel plug-in modules are offered at user-specified wavelengths from 1475-1625nm including service channels at 1310, 1480, 1510, and 1625nm. Each channel can be tuned over a 1.7nm range with 0.001nm resolution. These sources can be customized to meet special requirements including fiber optic connector type, PM alignment and fiber, and center wavelength on ITU grid points.
For higher density WDM system requirements, up to 25 additional FOM-7900B mainframes can be linked together for a total of 200 channels, all controlled from a single GPIB address.
|
|
Small, lightweight OTDR-dedicated platform factory-configured to house any EXFO OTDR configuration. Takes EXFO’s world-renowned OTDR technology to the next level of user-friendliness.
Applications
LAN/WAN to long-haul OTDR testing
Key Features and Benefits
Tests up to four wavelengths
The industry’s fastest acquisition times
Multimode and singlemode testing
Shortest dead zones available
|
|
|
The OBR 4400 takes the industry's first ultra-high resolution OTDR with backscatter-level sensitivity designed for component- and module-level reflectometry to the next level. With a small, easily transportable platform, the capability to "see" reflections out to 2 kilometers with no dead zone, and integrated temperature and strain sensing, the OBR 4400 gives you the ultimate in fiber diagnostics. The OBR 4400 uses swept-wavelength coherent interferometry to measure minute reflections (< 0.0003 parts per billion) in an optical system as a function of length with spatial resolution less than 50 microns. This provides the user with precision reflectometry and unprecedented optical-module inspection and diagnostic capabilities by providing the ability to locate and troubleshoot splices, connectors, fiber bends and breaks, insertion loss points, track polarization, verify PM components and more.
|
|
Two FasTesT ports: a three-wavelength singlemode port, including either 1625 nm or 1490 nm, and an optional two-wavelength multimode port, for a total of up to five wavelengths
Visual IL and ORL pass/fail analysis
Compatible with both the FTB-400 and FTB-200 platforms
FTTx ready: allows for the testing of passive optical networks (PONs) at 1310 nm, 1490 nm and 1550 nm, the three wavelengths recommended by the ITU-T (G.983.3) for PONs
Three-year warranty and recommended calibration interval, error-free testing and minimized training time
|
|
|
Luna Technologies' Optical Backscatter Reflectometer (OBR) delivers unprecedented inspection and diagnostic capabilities for the fiber-optics industry. Luna's state-of-the-art OBR provides isolation of faults and problems well before final test, saving hours in rework and hard dollars in yield loss.
|
|
|
Insertion Loss and Return Loss measurement for all four FTTX wavelengths. The 'no mandrel' method combined with concurrent dual-wavelength measurement makes this instrument the most efficient tool in FTTX component verification.
|
|
The ultimate platform for network experts. Combines physical, optical, transport and datacom testing in a single box. Perform simultaneous acquisitions and fast data post-processing, and benefit from a scalable range of test applications and field-interchangeable modules.
Key Features and Benefits
Five configurations (two-slot, four-slot, seven-slot, eight-slot and bus protector), providing maximum flexibility for long-haul, metro, DWDM, high-fiber-count, Ethernet, SONET/SDH or DSn/PDH test applications
Pentium-powered, with up to 512 MB memory
Easy-to-read, high-resolution 12.1 inch TFT screen
Windows® operating system
Simultaneous acquisitions and fast data post-processing
|
|
| ... products without technical information |
| |
|
|