|
|
CRX-series (Electric stand-on reach truck)
CRX 15 - Electric AC; Cushion; Load capacity: 1,5t
CRX 18 - Electric AC; Cushion; Load capacity: 1,75t
CRX 20 - Electric AC; Cushion; Load capacity: 2,0t
CRX 25 - Electric AC; Cushion; Load capacity: 2,5t
Benefits of the CRX series:
The Clark electric stand-on reach-truck, the CRX 15-25, is the perfect equipment for close quarters and a comfortable alternative to high-lift stackers. Everywhere where things get tight and high, your best bet is on the stand-on reach-truck. Simple, robust and reliable engineering with lifting heights up to 7.5 meters.
|
|
Series 2120
Basic capacities from 1500 kg to 3000 kg
Series 2121
Basic capacities from 1500 kg to 3000 kg
Series 2125
Basic capacities from 3000 kg to 4500 kg
Series 2130
Basic capacities from 3000 kg to 4500 kg
Series 2005
Basic capacities from 4000 kg to 6000 kg
Series 2131
Basic capacities from 4500 kg to 7000 kg
Series 2006
Basic capacities from 9000 kg to 10000 kg
Series 2004
Basic capacities from 12000 kg to 15000 kg
Series MU
Basic capacities from 3000 kg to 7000 kg
|
|
The SLT 30/35 is a very narrow aisle forklift truck that can increase your warehouse size by 50%. It enables you to be more efficient in product storage without adding on to your warehouse. Landoll Corporation also offers cold storage solutions.
**Landoll Corporation is located in Marysville, KS USA specializing in Very Narrow Aisle Forklift solutions for warehousing operations. The Landoll produced Bendi and Drexel SwingMast forklifts provide maximum utilization of storage space by reducing aisle size while still performing the jobs of a front loading forklift. This includes loading and unloading trailers, going from dock to rack, climbing ramps and working in a variety of operations. These trucks stack 60" aisles with lift heights up to 36'. Verry Narrow 64" Aisles versus Wide 144" Aisles = 12 warehouse rows vs 8 rows = 50% increase in storage. Landoll Corporation has been in business since 1963 offering Quality Products to Quality People**
|
|
The Landoll B3/30 - The Bendi articulating forklift stores standard pallets in aisles from 1676 to 1828 mm wide. This new range features a Curtis control system consisting of Separately Excited Traction Controls, Hydraulic Controller, foot accelerator and DC to DC converter. Capacities at a 24" (600 mm) load center are 3,000 lbs (1363 kg). Lift heights are available to 360" (9.14 M). The main features of the new control system include:
- Easily programmed for specific customer's needs regardless of application
- Extended motor life and optimized power usage
- Ramp restraint safety feature automatically limits speed down ramps
- Regenerative braking
- Selectable "Economy Mode" feature increases single charge run time by 25%.
|
|
Very narrow-aisle (VNA) articulating Bendi electric forklift truck Landoll
3,000 lb. (1363 kg) to 4,500 lb. (2045 kg) capacity
The Bendi 4 wheel articulating forklift stores standard pallets in aisles from (72”) 1.8 to (84”) 2.13 M wide depending on model and lift height. This 4 wheel model range features an AC control system and Motors for Traction and Hydraulics. Four new models are available with this new control system: B30AC - B40AC - B45AC – and B45AC-HL. Capacities at a 24" (600 mm) load center are 3,000 lbs (1363 kg) to 4,500 lbs (2045 kg). Lift heights are available to 433" (11 M).
|
|
Warehouses designed for these high-throughput lift trucks achieve immediate cost savings and long-term efficiencies. Compared to conventional forklifts, a Raymond®Swing-Reach truck's high-level pallet handling and case-picking capability could triple your storage capacity
Maneuvers in very narrow aisles with unmatched throughput
Twin tubular mast design provides optimum rigidity when traveling loaded and elevated.
Dual I-beam construction and a wide footprint keep the operator's platform rock-solid, even at the highest elevations.
intelliguide™ wire guidance option relieves the operators of steering responsibilities in very narrow aisles, freeing the operator to concentrate on load handling tasks.
Raymond's patented intellispeed™ control system provides smooth coordination between travel speeds and load height and weight, and automatically governs the appropriate maximum speed.
Large loads up to 48" deep by 108" wide can be handled in aisles as narrow as 68".
|
|
|
|
|
|
48 V three wheel counter balance truck for loading/unloading, stacking and internal transportation, ideal for warehouses and terminals. The ET series includes a wide programme of optional extras to meet most handling requirements. As well as seven models ranging from 1.25 to 2.0 tonnes there are also a number of different tyre configurations.
Great User Comfort: The ET series is designed with the driver in mind. Plenty of space and the controls are logically placed for quick and precise operation.
Reduced noise: What distinguishes the ET series from its rivals is the extremely low noise level. A carefully thought out design, from motor suspension to driving platform, reduces the noise experienced by both the driver and those in the vicinity.
Car influences: Well thought out controls make the job easier. Controls infl uenced by the motor industry make the ET series natural to work with.
Flexible design to suit customer requirements: The series also contains four different mast designs, including a newly developed free lift mast for best possible visibility. There are in addition several different configurations of cabs for the ET series.
Flexible computer: The computer in the ET series controls the vital functions of the truck and permits large numbers of individual settings.
Safety: Lift and tilt lock, reduced speed for sharp corners etc. The ET series has a number of safety solutions that reduce risk of damage or injury to goods, trucks or staff.
|
|
CAPACITY: 1.5t - 2.0t
ELECTRIC SIT-DOWN 3 WHEEL: AMX~BMX SERIES
Powerful AC induction drive motor for top level performance and low maintenance.
3 types of regenerative braking recharging the batteries when:
Accelerator is released
Switch back (reverse shift)
Brake pedal activated
Low and wide floorboard for easier on and off.
Convenient hinged side access cover provides fast access to power steering and hydraulic motors and pumps.
Easy opening, all steel, swing up battery cover.
Overhead guard with full lattice top design and angled front cross member offers exceptional upward view for the operator.
|
|
Looking for IC power without the emissions? Our electric cushion & pneumatic tire range is your answer. These versatile lift trucks are designed for high-productivity environments that demand compact maneuverability and clean-running, cost-efficient operations.
1.3 ~ 2.0 Ton Capacity Three-Wheel Electric - AC
Model Power Capacity Load Center Rated Power
EP13TCA Electric 1250 (kg) 500 (mm) 2 x 4.5 (kW)
EP15TCA Electric 1500 (kg) 500 (mm) 2 x 4.5 (kW)
EP18TCA Electric 1750 (kg) 500 (mm) 2 x 4.5 (kW)
EP20TCA Electric 2000 (kg) 500 (mm) 2 x 4.5 (kW)
|
|
3,000 - 4,000 lb Capacity
Electric Three-Wheel Cushion Tire
Tight-squeezers. The N-Generation 100% alternating current (AC) 3-wheel electric forklift truck is designed for fast travel speed, efficiency and reliability in warehouse, shipping and other applications that require exceptional maneuverability. This truck is especially popular with operators who frequently load and unload containers and delivery trucks, and who need to maneuver in tight aisle spaces or under low overhead clearances.
Model type power capacity
FB16NT 3 Wheel 36V/48V 3.000
FB18NT 3 Wheel 36V/48V 3.500
FB20NT 3 Wheel 36V/48V 4.000
|
|
AMX~BMX
FEATURES & BENEFITS
- 3-wheel maneuvering.
- Excellent visibility.
- ACdrive technology.
Capacity: 3,000–4,000 lbs
|
|
General description
Electric Counterbalanced Lift Truck
When hard-working manufacturing, industrial and commercial applications require top-notch material handling performance, our electric counterbalanced lift trucks can help get the job done. Whether you're handling costly materials or shipping products on an extremely tight schedule, these lift trucks offer the functionality you need to stay competitive.
With rugged and durable design features engineered for performance, our ET3000-ET4000 series of 3-wheel electric lift trucks improves material handling productivity in a full range of demanding manufacturing environments. Ideal for loading and unloading trailers, this lift truck offers top-notch maneuverability and visibility
7.000-12.000 lb Capacity Electric Cushion Tire
Model Capacity(lb) Top speed (mph)
ET3000 3.000 7.4
ET3500 3.500 8.9
ET4000 4.000 8.5
|
|
|
|
|
|
Rear-wheel drive, compact design, high performance, an ergonomically designed operator compartment. These are the
strengths of the Jungheinrich electric forklift trucks EFG 110k/110–115. The advantages: high manoeuvrability, optimum performance in confined spaces and a high level of operator comfort.
Low step for safe and comfortable entrance to the cushion mounted cab. The adjustable steering column and the threeway adjustable comfort seat offer individual adaptation to all operators. The comfort high roof is 2090 mm high and offers superior headroom (“container roof” with a height of 1970 mm is available as an option). Excellent all round visibility enhances safety; the ergonomically positioned hydraulic levers to the right of the driver’s seat in SOLO-PILOT control (separate levers) or MULTI-PILOT control
(all functions in one lever) for optimum handling. With a clear text indicator the comfort display highlights all important vehicle data, for example operating hours, battery charge and brake system. The system also stores all relevant service data. Low steering and lever operating forces and a familiar automotive pedal layout ensures safe operation. The encapsulated motor with Ac technology enables smooth acceleration, suitable for both indoor and outdoor operation.
High Productivity
|
|
The FBESF range is our smallest, most compact electric forklift - This 3 wheel design forklift is designed for light to medium product weights and product movements.
Its compact dimensions ensure it can navigate in tight production areas and rack and stack products in storage systems where operating aisles are at their minimum.
It is flexible enough to be used both inside and outside.
|
|
|
Toyota's 7FBEU Series 3-wheel electric elevates the idea of energy conservation to an entirely new level. Each subsystem is specifically designed to either conserve or regenerate power, maximizing productivity between battery charges. Furthermore, Toyota's Active Mast Control (AMC) system enhances lift truck load stability, assuring you that safety in your workplace comes first, with productivity coming in a very close second. Check out some of the features below to learn more about these great trucks
|
|
EP Electric Forklift Truck-J series
INTRODUCTION
The distinctive features of the new J series electric three-wheel forklift are as follows:
- Versatility of use due to compact design and minimal operating space requirements. Compact dimensions combined with superb maneuverability.
- High stability, both when stationary and cornering, due to long wheelbase, low centre of gravity and wide tyres.
- Economy of operation, resulting from minimized maintenance costs, e.g. Low-wear brakes.
|
|
Nissan's line-up of three and four-wheel, AC electric, sit-down models deliver exceptional performance with maximum energy efficiency. Powerful and energy efficient, Nissan's 100% AC series line-up offers incredibly fast travel and lift speeds, with plenty of features to help conserve power or maximize productivity. With AC brushless pump and drive motors, these lift trucks have fewer serviceable parts and longer service intervals, resulting in lower operating expenses and higher productivity.
3-Wheel TX Series: 3,000 / 3,500 / 4,000 lb. Capacities
|
|
M 700 EEx Zone 1
A compact and powerful three-wheel forklift, the M 700 EEx is a multi-purpose machine for ex-protected areas. A short base and powerful rear-wheel drive provide exceptional manoeuvrability.
|
|
The outstanding features of the HUBTEX ESW series 4120 fork-lift reach truck are a compact design and a most progressive technology. The ESW offers multi pack handling over conventional reach trucks to maximise stock rotation by a combination of high lifting capacities and long battery running times. The HUBTEX series 4120 with capacities from 3500 kg to 6000 kg is an alternative solution to conventional fork-lift reach trucks with restricted standardized capacities.
|
|
|
|
|
|
CAPACITY: 1.5 t - 1.75t
ELECTRIC SIT-DOWN 4 WHEEL: ABX SERIES
Powerful 11.5" drive motor for top level performance and low maintenance.
Low and wide side steps for easier on and off.
Convenient hinged side access cover provides fast access to power steering and hydraulic motor and pumps.
Steer axle supported in two large rubber mounts for smoother ride and road shock absorption.
Easy opening, all steel, swing up battery cover.
Overhead with full lattice top design and angled front cross member offers exceptional upward view for the operator.
Time tested, user proven, reliable, easy to service, GE SCR drive motor controller.
CAPACITY: 2.0t - 3.25t
ELECTRIC SIT-DOWN 4 WHEEL: BBX SERIES
The truck's dash display provides easy to read information to the operator and maintenance personnel.
Our open mast design affords the operator with good visibility for easier load handling and view of the area ahead.
Hand and foot controls are located for optimum operator convenience and are positioned to minimize obstruction for easier entry and exit from either side of the lift truck.
Full hydraulic power steering system is smooth and easy to operate with the double ended steering cylinder design.
Time tested, user proven, reliable, easy to service, GE SCR drive motor controller.
Lift off floor plate permits fast access for inspection of the brake master cylinder and drive motor.
A hinged side panel provides fast access to the power steering and hydraulic motors and pumps.
The easy opening, all steel, swing up battery cover and right hand slotted overhead guard permits fast battery exchanges and inspections.
Access to the motor controller and contactor panel is through a swing out steel access door.
CAPACITY: 3.5t - 6.0t
ELECTRIC SIT-DOWN 4 WHEEL: CBX SERIES
Low and wide side steps for easier on and off.
Convenient hinged side access cover provides fast access to hydraulic motors and pumps.
Steer axle supported in two large rubber mounts for smoother ride and road shock absorption.
Large palm-size control knobs.
|
|
Looking for IC power without the emissions? Our electric cushion & pneumatic tire range is your answer. These versatile lift trucks are designed for high-productivity environments that demand compact maneuverability and clean-running, cost-efficient operations.
Model Power Capacity Load Center Rated Power
EP10CA Electric 1000 (kg) 500 (mm) 9 (kW)
EP10HCA Electric 1000 (kg) 500 (mm) 9 (kW)
EP14CA Electric 1350 (kg) 500 (mm) 9 (kW)
EP14HCA Electric 1350 (kg) 500 (mm) 9 (kW)
EP15CA Electric 1500 (kg) 500 (mm) 9 (kW)
EP15HCA Electric 1500 (kg) 500 (mm) 9 (kW)
EP18CA Electric 1750 (kg) 500 (mm) 9 (kW)
EP18HCA Electric 1750 (kg) 500 (mm) 9 (kW)
EP20CA Electric 2000 (kg) 500 (mm) 10 (kW)
EP20HCA Electric 2000 (kg) 500 (mm) 10 (kW)
EP25CA Electric 2500 (kg) 500 (mm) 10 (kW)
EP25HCA Electric 2500 (kg) 500 (mm) 10 (kW)
EP28CA Electric 2750 (kg) 500 (mm) 10 (kW)
EP30CA Electric 3000 (kg) 500 (mm) 10 (kW)
|
|
3,000 - 6,000 lb Capacity
Electric Cushion Tire
All-around-runners. Our N-Generation 4-wheel electric trucks are known for speed and maneuverability, making them a preferred choice in work environments with narrow aisles, bulk storage areas, and where floor stacking is common. These trucks incorporate the latest in AC technology, delivering top travel speeds and increased energy efficiency.
Model type power capacity
FBC15N 4 wheel 36 V/48V 3.000
FBC18N 4 wheel 36 V/48V 3.500
FBC20N 4 wheel 36 V/48V 4.000
FBC25N 4 wheel 36 V/48V 5.000
|
|
BBX
FEATURES & BENEFITS
- Greater visibility.
- Designed for operator comfort.
- Choose between high performance and standard models.
SPECIAL FEATURES
- Total AC power and controls for both the drive and hydraulic motors. The drive motor is transverse mounted.
- Integrated, on-demand power steering. The power steering runs off the main hydraulic motor which runs only when required.
- Auto Power-Off. If no functions are operated for 15 minutes, the power
automatically turns off.
- Tusk Operator Presence System PLUS senses when the operator leaves the seat and disables travel and basic hydraulics.
- Multi-purpose display unit integrated into the console with access to performance parameter programming and service messages. No special handset required.
|
|
CBX
FEATURES & BENEFITS
- Heavy-duty lifting capacity.
- High torque traction motor.
- Ease of serviceability.
|
|
General description:
3,000-6,500 lb Capacity Electric Cushion Tire
From food and beverage plants to chemical processing and textile mills, E3000-E6500 lift trucks offer the quality advantages required in these applications. Whether you're moving costly products long distances from warehouse to shipping or moving materials quickly across shorter distances, the value-added premium features, including a five pre-programmed performance mode that allows you to match your lift truck to specific performance requirements, provide control over your material handling
|
|
The Jungheinrich EFG D30 is designed for transporting heavy and bulky loads in comfort and safety over medium to long distances. If forward visibility is restricted, the cab can be electrically rotated up
to 180 degrees, giving the driver clear all-round visibility, enabling loads to be transported safely and without stress.
Using innovative AC technology has opened up new opportunities, providing a whole range of benefits for electric trucks:
- Outstanding productivity through maximum acceleration, travelling and lifting performance.
- Longer operating times through maximum efficiency and efficient energy recovery.
- Precise control and wear-free regenerative braking when the accelerator is released and energy is fed back to the battery.
- Enclosed, maintenance and wear-free AC motors (without carbon brushes) (IP 54 rating).
- This allows for faster turnaround between jobs over longer operating periods with a single battery charge.
|
|
Bring out the best in your operators. Give them more comfort and confidence with the new 4700 Series four-wheel electric lift trucks from Raymond.
Fits your operator and your operation
Packed with special features to boost operating efficiency, the 4700 Series is simple to learn and use, more maneuverable and more responsive than any truck in its class.
Controls have an intuitive, tactile, natural feel making operation easy and comfortable.
Raymond's exclusive ACR System™ helps lower costs through fewer parts and repairs, and increases productivity with better acceleration, and less downtime.
An open view mast and smooth hydraulics make load handling easier than ever.
Six preprogrammed performance speeds match individual applications and operator skill levels.
|
|
EP Electric forklift Truck-J series
The distinctive features of the new 4-5t/8800-11000lb J series electric four-wheel forklift as follows:
- Versatility of use due to compact design and minimal operating space requirements. Compact dimensions combined with superb maneuverability.
- High stability, both when stationary and cornering, due to long wheelbase, low centre of gravity and widetyres.
- Economy of operation, resulting from minimized maintenance costs, e.g. fully enclosed 3 phase AC asynchronous motors with high degree of efficiency maintenance free life.
|
|
Nissan's line-up of three and four-wheel, AC electric, sit-down models deliver exceptional performance with maximum energy efficiency. Powerful and energy efficient, Nissan%u2019s 100% AC series line-up offers incredibly fast travel and lift speeds, with plenty of features to help conserve power or maximize productivity. With AC brushless pump and drive motors, these lift trucks have fewer serviceable parts and longer service intervals, resulting in lower operating expenses and higher productivity.
4-Wheel BX Cushion Series: 3,000 - 8,000 lb. Capacities
4-Wheel BX Pneumatic Series: 3,000 - 5,000 lb. Capacities
|
|
M 700-4 EEx Zone 2
With a lift capacity of up to 3.500 kg, the M 700 EEx achieves high productivity levels. This truck has a proven global track record of reliable operation in harsh conditions while guaranteeing absolute safety in ex-protected areas.
|
|
|
|
