|
|
- Hanging Platform: Creates a working platform around the edge of roofs and structures.
- Cantilever Platform: Used to provide a working platform and walk way around wall forms and partition walls.
|
|
Foldable scaffold system Multip for safe working places consisting of platforms with guard rails and access hatches assembled at the formwork also during transport.
* Formwork and working platform can be transported already assembled
* Repeated assembly of a number of many individual brackets, platforms and guard rails is no longer necessary
* Time profit by folding mechanism
* Safe and accordingly quicker operation with all system components
* Very much longer service life than traditional timber decking
* Purchase of timber for decking and guard rail is no longer necessary
* All safety at work directives are complied with
Technical Data
Design Load: 2,0 kN/m²
Platform width: 72 cm - Logo and Athlete
85 cm - Trapezoidal Girder Formwork
Platform length: 135 - 240 cm - Logo and Athlete
238 cm (ext.), 210 cm (int.)
from Diameter 7,00 m
|
|
The Transporter is Fraco's new multi purpose transport platform. It is the perfect access equipment to carry heavy building material including plasterboards, glazing panels, pallets of blocks and bricks, scaffold poles and so on.
• speed of 39 ft (11,9 m) per minute
• payload capacity of 8000 lbs (3630 kg)
• cabin length from 8 ft 4 in (2,5 m) to over 16 ft (4,9 m)
• loading volume of 568 ft 3 (16,1 m3)
|
|
Transport platform
SAFI introduced this year a new line of transport platforms with payload from 600 to 2000kg. this new hoist has been developed to transport both goods and persons.
The main feature of the new hoist are: manoeuvring either with a control panal aboard or with a remote control at the ground, double speed and a new access entry.
The introduction of this model made a great impact into the market.
|
|
Designed to satisfy the needs of masonry contracting companies, the FRSM-20K work platform combines safety, sturdiness and capacity for mid- to large-size job sites.
Used with one or two masts, this system of cantilevers, bridges and forward extension allows users to benefit from over 130 different configurations. Ideal for construction projects up to 80 ft (25 m) in height, the FRSM-20K also distinguishes itself when comfort, safety and performance in high altitude are required.
Its lifting hook mechanism calls for minimum maintenance and gives the FRSM-20K all the power required. Assembled with one mast, this system offers:
* a maximum length of 48 ft (14,6 m);
* a load capacity of 10 000 lb (4 540 kg);
* a lifting speed of 7 ft (2,1 m) per minute.
|
|
The youngest member of Fraco's family, the ACT-4 work platform combines safety, quickness and flexibility. It distinguishes itself by its multi trade profile and it represents the best choice for specialized contractors such as masons, repointers, glaziers, painters, plasterers, and general contractors involved in inspection, renovation, building maintenance, etc.
Used with one or two masts, this system of cantilevers and bridges is the solution to vertical access problems encountered during construction projects and other special works.
The endless screw mechanism of the ACT-4 allows quick elevation and exact positioning of the platform. Assembled with one mast, this system offers:
* a maximum length of 47 ft (14,3 m);
* a load capacity of 4 000 lb (1 815 kg);
* a lifting speed of 16 ft (4,9 m) per minute.
As another benefit, the ACT-4 has the ability to share its mast sections with the heavier model, the ACT-8; this is a new way to maximize your investment.
|
|
Designed to satisfy the needs of small- to mid-size construction companies, the FRSM-1500 work platform combines safety, lightness and mobility for all residential projects or small- to mid-size job sites or tight access areas.
This versatile platform represents the ideal tool which allows masons, painters, roof sheeters and cladders, glaziers and other professionals, to realize works of inspection, maintenance and restoration, or different types of facade projects. It can also be used for special applications.
Its ball and track mechanism calls for minimum maintenance and gives the FRSM-1500 a smooth, quick and silent operation. Assembled with one mast, this system offers:
* a maximum length of 28 ft (8,5 m);
* a load capacity of 1 500 lb (680 kg);
* a lifting speed of 14 ft (4,2 m) per minute.
|
|
The ACT-8 work platform combines safety, power and flexibility. It distinguishes itself by its versatility and represents the best choice for contractors specialized in repointing, glazing, E.I.F.S., curtain walls installation, metal framing, etc.
Used with one or two masts, this system of cantilevers, bridges and forward extension is the solution to vertical access problems encountered during inspection, restoration and maintenance of buildings and structures. It is also an access solution for industrial projects.
The endless screw mechanism of the ACT-8 allows elevation at variable speed and an exact positioning of the platform. Assembled with one mast, this system offers:
* a maximum length of 50 ft (15,2 m);
* a load capacity of 8 000 lb (3 630 kg);
* a lifting speed up to 39 ft (11,9 m) per minute.
|
|
|
|
|
|
Single mast climbing work platform
As a leader in the production of mast climbing platforms, today SAFI has a range of products which covers from the smallest single mast climbing work platform for small restoration work with the “JOLLY JUNIOR” to large twin mast climbing work platforms for heavier constructions work like the “VISION 4000”, for working surfaces over 100m high and 35m long.
The strong point of all the models is the modular composition, both height-wise and lengthwise, which means enormous saving on construction site costs.
There are many versions for all types of machines : single mast, twin mast , wheel mounted for road or construction site use and special versions.
All models had the ministerial authorizations before the machine directive of 1997 and several international certificates such as the German TUV GS , the French ATS, the Italian OCE.
After the introduction of new regulations in the European Community all equipments were conformed to the safety standards and obtained the European certification from Italian and International boards with the related CE mark.
|
|
|
Designed to fulfill your needs, FRACO’S FRSM-8000 Hydraulic Mast-Climbing Work Platform is a surprisingly powerful and efficient tool for all contractors who want to lower their costs and become more productive and profitable. Increase your earning power by 30-40%!
|
|
|
FRACO’S FRSM-3000 Hydraulic Mast-Climbing Work Platform is a surprisingly powerful and efficient tool for all contractors who want to lower their costs and become more productive and profitable. Increase your earning power by 30-40% with this towable self-contained platform! Each unit can carry up to 1,360 kg (3,000 lbs.) of LIVE load! Highly flexible on its freestanding trailer, the 3000 is perfectly designed for working heights of up to 11 m (35 ft) without being anchored to the wall.
|
|
Mast climbing work platform are a handy and efficient alternative to traditional scaffoldings.
Suitable for:
- Facade maintenance and repair
- Bricklaying
- Facade insulation
- Window installation
- Facade refurbishment, plastering and painting
- Ship building and restoration
- Roof restoration
- Industrial plants
- Demolitions
|
|
|
|
|
|
Twin mast climbing work platforms
As leader in the production of mast climbing platforms, today SAFI has a range of products which covers from the smallest single mast climbing work platform for small restoration work with the "JOLLY JUNIOR" to large twin mast climbing work platforms for heavier constructions work like the "VISION 4000", for working surfaces over 100m high and 35m long.
The strong point of all the models is the modular composition, both height-wise and lengthwise, which means enormous saving on construction site costs.
There are many versions for all types of machines : single mast, twin mast , wheel mounted for road or construction site use and special versions.
All models had the ministerial authorizations before the machine directive of 1997 and several international certificates such as the German TUV GS , the French ATS, the Italian OCE.
After the introduction of new regulations in the European Community all equipments were conformed to the safety standards and obtained the European certification from Italian and International boards with the related CE mark.
|
|
CHARACTERISTICS:
It comes supplied of series with:
- slowly in rubber antislide
- vaschetta door objects
|
|
The ALTA "L" platform is intended for temporary applications for lifting people and their working equipment - at unlimited heights. It is designed particularly for lightweight applications, such as painting and decorating, refurbishing, jointing and repairs, etc. ...
The complete system consists of the working platform equipped with two electric TIRAK® hoists and the support wheels, suspended by means of steel wire ropes from a suspension structure.
|
|
Working platforms for roadway drivages
dhms working platforms for roadway drivage operations are designed for drilling and shotfiring, arch setting and support assembly work.
The platforms are suspended from a twin overhead rail track and can be moved using climbing trolleys or self-advancing systems. Four compressed-air hoists built into special trolley units are used for raising and lowering the platform.
A modular design system means that each platform can be adapted to a wide range of roadway profiles.
Special features:
Deployable in gradients of up to 13.5 degrees
Easy to assemble
Modular design allows rapid adjustment to different roadway profiles
Robust construction with high loading capacity.
|
|
|
Doka folding platforms K are pre-assembled, ready-to-use scaffold platforms with standardised system components for all construction jobs, compliant with both EN 12811-1 for working platforms and DIN 4420 for protection platforms.
|
|
|
|
|
|
The working scaffold LAB 130 meets these demands. It is a practical working and safety scaffold, which is delivered in stacks and ready for use.
The LAB 130 complies with the German DIN standard 4420 and it can be applied up to scaffolding group No. 4 (300 kg/m²).
* The LAB 130 can be used right from the stack: Just fold up the guard-railing, attach the scaffold to the crane, fold down the brackets, lift the scaffold and suspend it.
* The integrated stacking aid and anti-slipping protection guarantee an efficient and safe transport.
* The LAB 130/240 and the compensation platform fit crosswise on every truck. This reduces transport costs. The platform height of approx. 30 cm allows to stack up to 7 platforms.
* Different platform lengths of 340 cm and 240 cm and the versatile, crescent-shaped corner platform allow to adapt to every building shape.
* The compensation platform 240 allows to close gaps up to 2.00 m.
* You can choose between loop suspension, shoe suspension or tube suspension.
* The platform is planked with durable, non-slipping aluminium on a hot-dip galvanized steel frame construction.
* The guard-railings are provided with an integrated protective grille and with easy-to-handle railing extensions (also with protective grille) - to be applied as safety-catch scaffold.
|
|
P3D Platform Increased Safety
Compliant with standrad NFP 93.351
Automatic locking of the lower parts of the platform
Fixing with secured pegs
Bracing of panels up to 8.50m
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
