|
|
|
Free wheel with a cage with contact elements running on races primarily measured in inches
|
|
|
Free wheels with bearing incorporated, with same dimensions of bearings series 6200, available in version ZZ and 2RS
|
|
Drawn cup roller clutches are one-way clutches comprising thin-walled, drawn outer rings with a series of ramps on the inside diameter, plastic cages, springs and needle rollers. They can transmit torques in one direction and are radially compact. The roller clutches are available with and without a bearing assembly.
Drawn cup roller clutches give very precise indexing, since individual spring retention of each needle roller ensures constant contact between the shaft, needle rollers and the clamping surfaces. They allow high indexing frequencies due to their low mass and therefore the low moment of inertia of the clamping elements. They also have a low free-wheeling frictional torque.
Drawn cup roller clutches can be used in a wide variety of applications, for example as indexing elements, back-stopping clutches or overrunning clutches. The drawn cup roller clutch fulfils the overrunning or holding function as appropriate.
|
|
In this product group only the clamping elements are supplied, assembled into a cage or retainer.
This must be mounted between supporting inner and outer races which may be formed directly in the customer’s component or machine.
The races should be manufactured from the correct material and to the required specification and the whole assembly supported by the existing shaft bearings which must absorb all axial and radial loads.
Suitable lubrication and sealing also have to be provided.
|
|
RINGSPANN freewheels are an essential design element in the machine and automotive industry as well as aviation technology. Concerning know-how and technology RINGSPANN belongs to the leading manufactures of the world. The freewheel as an automatic driving element is preferred to conventional solutions because of its decisive advantages offered in respect of
operating safety
economics
higher degree of automatisation.
|
|
SIAM-RINGSPANN irreversible lock enables free driving of any machine element in both directions of rotation but locks any reverse torque from the the driven element to the driver.
Application:
Locking devices for steerable wheels
Rudder and control-surface locks in ships and aircraft
Non-return locking in shut-off and control valves
Locking adjustable devices in position
Securing hatches and windows
Ensuring that railway signals and points remain at their settings
Ensuring that settings are held in hydrostatic pumps
Cam adjustments
Locking and manual adjustments of gate opening and closing mechanisms
Locking of trolleys in hoist equipment
Securing aerials against angular shifts
Locking horizontal ball-bearing mounted spindles
Locking manipulator equipment
|
|
Free wheels with cams to be incorporated with obstruction radial reduced.
Couples from 48 to 460 Nm for tree of diameter 20 with diamètre50.
They count rollers of blocking between a line of balls and rollers, to combine dynamic heads, static, axial and radial.
Without maintenance, autonomous, lubricated with grease for normal conditions of use, they are used to lock a step back or to place from one drive to the other in a kinematics to multiple order.
External dimension identical to the bearings series 59.
|
|
The transmission is involved in the 2 directions of rotation and is locked in position. The origin of the movement can be manual or electric.
The bidirectional transmission involves the transmission towards the right-hand side or the left. If the movement of entry ceases, the irreversible one locks the transmission in the position of stop and the movement of exit is neutralized in the 2 directions.
|
|
Placed between 2 energy sources, the oversteer one couples or disconnects whatever the differential speed.
It is a relayage simple, instantaneous, autonomous, without control.
To 360.000 Nm, the active elements are with slopes, cams.
Under casing, lubricated with oil or grease.
During launching out of high-speed, the oversteer one disunites and protects slow speed.
|
|
| ... products without technical information |
| |
The Model ProSort SC series of sorters are belt driven sortation conveyors. The belt concept provides a reliable method of tracking packages to the divert stations. Take-away spurs may be skatewheel type or powered type slaved from the main sorter.
- Overall Widths: 18" single side only - 24", 30" & 36" single or double sided
- Bed-Roller bed with 1.9" dia. x 16 ga. rollers with ABEC-1 bearings spaced every 6". Mounted in 6-1/2" deep x 12 ga. powder painted formed steel channel frame
- High performance center drive with shaft-mounted gearmotor and variable speed controller, horsepower based on speed and length
- Belt Speed-Determined by application requirements, 300 FPM maximum
- Right hand, Left hand or Two-Sided diverts available
- Adjustable Floor Supports Available
|
|
The Model ProSort SRT is a sorter for small to medium sized items. Product is transported on multiple narrow belts. Rollers pop up between the belts to transfer items at right angles to the sorter.
- Right Angle Transfer
- Two-Sided Transfer
- High Sort Rates
- Close Transfer Locations
- Flexible Sort Locations
|
|
Multi directionnel transfer system X-RAILS
This system transfers the products without stopping.
The products can be oriented during the transfer. The angle of the transfer is adjustable from 0° to 90° to the right or left.
This system is for flat based products, e.g. cartons tray etc.
The maximum weight for the products is 100 Kg for a size of 600 x 600 mm.
Depending on the sizes of the products, there are two ranges of X-RAILS :
- L : for the larger products
- S : for the smaller (smaller roller pitch).
- PRODUCT TRANSFER WITHOUT STOPPING
- MAXIMUM SPEED 2 METERS PER SECOND
- EASY TO CONTROL AND COMPACT
- TRANSFER ANGLES ARE ADJUSTABLE FROM 0° TO 90° TO THE RIGHT OR THE LEFT
- PRODUCT DIMENSIONS : FROM 250 x 250 A 600 x 600 MM - MAXIMUM WEIGHT : 100 KG
|
|
- Ideal for shipping and/or receiving operations with a high rate requirement and numerous divert locations are required.
- Can accomplish rates up to 90 cartons per minute when used with sortation belt conveyor running at 180 - 300 feet per minute.*
- Handles a wide variety of conveyables up 75 lbs., depending on system sort rate and design.
- (3) rows of wheels lift the carton onto a 45° powered or non-powered takeaway conveyor.
- Modular construction allows for many design possibilities, such as unlimited sorter lengths and countless divert configurations. The assembly is also easier to maintain.
- Designed to be used with Automotion's standard belt conveyor.
|
|
Specification
TRANSFER ARM: 7 ga. formed channel.
TRANSFER WHEELS: Frantz model 35Z on 3" wheel centers. Wheels are rated
at 50 lbs. capacity each.
STANDARD LENGTHS: 2', 3', 4', and 5'.
STRAND CENTERS: 18"
LIFT: Positive type lift with 1" of net lift.
BEARINGS: Heavy duty, lubricated, ball bearing unit with cast iron housings.
MOUNTING: Integral part of unit, with 15" top of wheel elevation (down
position). Unit designed to mount between conveyor frames
CAPACITY: Unit load not to exceed 500 lbs.
|
|
|
The FKI Logistex sorter line includes sliding shoe, tilt-tray, double-tray, and cross-belt sorters designed to enable high-speed, accurate throughput for a wide variety of package weights and sizes.
|
|
This system sorts individual materials to a designated place according to its own information specified by the bar-code or RFID attached to them by automatically distributing and collecting with the conveyor and sorter.
Those products are used for : Baggage Handling System ; Automated Postal Processing System and Logistics Processing System.
|
|
Features
High-speed, accurate sorting
Gentle sorting with little shock
Diverse cargo
Can use many sorting compartments
Specifications
Sorting system Pop-up system
Sorting capacity 5000 cases/h (varies depending on conditions like: cargo length and conveyor speed etc. )
Speed 36 46 61 76 91 100 m/min
Length MAX 100 m
Frame width 500 550 630 700 800 mm
Sorting direction Single-sided sorting
Cargo Carton cases, bottles, poly cases
Cargo dimensions 150 - 800(W) X 230 - 800(L) X MIN.30(H) mm
Cargo weight 1 - 30 kg/piece
|
|
|
Positioned just below the highest throughput sortation applications is HK Systems’ family of medium rate sorters. This group comprised of the High Speed Wheel, Steerable Wheel, and the Modular Plastic Belt sorters address customer applications where the case rates are traveling at or below 300 feet per minute. Each of these sorters is specifically designed to handle mid-level production needs while delivering the reliability, durability, and affordability required in today’s distribution environment. Sorter selection among these alternatives is based on product characteristics such as size, weight, and the features of the conveyor contact surface. Each design is modular permitting quicker and easier initial installations and future field modifications. The Modular Plastic Belt sorter allows for zero spacing between divert lanes and can handles products ranging from envelopes to cases.
|
|
|
Positioned with vertical axes.
|
|
Model-55
Three-roller bending machine
Orient
Making of rings, arcs, spirals with specified coils step lifting of tubes and profiles by 3-roller bending method.
Abilities
- 3 rollers drive
- Control of theoretical bending
radius
- Spiral step lifting control
- Work in vertical and horizontal
position
|
|
Three driving rolls
- Pyramid style design
- Bending capacity: pipe up to 4"; angle up to 80x80 mm (3"x3")
- Hydraulic adjustment of bending roll
- Combination horizontal-vertical working position
- Mechanical positive stop for consistent repostioning
- Digital readout
|
|
Type RB profile bending machines are used when aluminium or steel profiles are to be bent to the highest levels of quality, precision and productivity. These machines have particularly high flexibility and performance.
The variable clearances on the side rollers mean that these machines can be adjusted to fit the profile perfectly in each case. This leads to a noticeable improvement in bending quality but also to significantly higher bending performance than is found with conventional bending machines.
|
|
|
|
|
|
HYDRAULIC SECTION BENDING MACHINE MCP
The three roll double pre-bending section bender DAVI MCP is a technologically advanced machine that is most effective when bending regular sections such s a flat bar (flat or on edge), rectangular bars or typical T, UPN, angles or tubes with square or rectangular sections (in addition to stainless steel tubes, brass or copper or other materials). The heavy structure and sizing together with the complete range of accessories including a hydraulic traction device which makes the MCP particularly well adapted for making beams with sections of up to 500 mm. The lateral rolls are adjusted hydraulically and independently to permit the machine to perform the pre-bending operation.
The machine can be equipped with guiding rolls to compensate the deformations that occur during the bending process. The modular rolls made in alloy steel, are mounted on large diameter shafts, on auto aligning roll bearings (pre-lubricated) to obtain a high level of performance.
|
|
| ... products without technical information |
| |
|
|