|
|
A full series of flexible solution drives that are versatile and extremely easy to use, featuring control for high performance and unbeatable advantages in their scalability and compact size.
|
|
|
|
|
|
These electrical machines are expressly designed and manufactured for military, aeronautics and other purposes where high performances and reliability are required. They are constructed in the singleblock 2 ball bearings version and on coaxial 4 ball bearings version with couplement joint and basement.
They are available in both version: synchronous and asynchronous with 1% slip or 2% slip.
On request the electric drive panel is supplied.
GENERAL TECHNICAL DESCRIPTION
Asynchronous motor with cage or selfstarted syncronous motor by means special rectifier bridge.
Selfregulated 400 Hz alternator brushless type
Drip proof : IP 21 (others upon request ).
In according to the following international standards IEC 341 , CEI 23 , VDE 0530 , MIL STD 704 , BS2G 219 , AIR 2021 E.
Construction available on request in according to the radio suppression standards : MIL STD 461,
GA EG13E , VDE 0875 grade N or K ,MIL 16910A .
Continuous duty S1
Insulation class : rotor H , stator F
Double impregnation; protected by a antimildew varnish.
Three phase voltage 115 / 200 or 120 / 208 V (others upon request).
TYPICAL PERFORMANCE
VOLTAGE REGULATION : ± 0.5% from no load to full load
WAVEFORM :THD < 2% (total harmonic distorsion) line to line and line to neutral with linear balanced load
(THD < 1% upon request).
RECOVERY TIME : < 60 ms
OVERLOAD CAPACITY : 110 % 1h ; 125 % 10 min ; 150 % 2 min
|
|
Wide range of input frequency. Can convert pulse input's to a mA/V output.
In lower frequencies can also be used as an divider.
|
|
EDS1100 Series Special For Drawing Machine Frequency Inverter
1 independently constitute dual frequency digital PID control system
2 To identify rolling diameter of line-receiving tray aotomatically
3 Automotic identification of mechanical transmission ratio
4. Automatic identification of diameter of cable
5. Automatically adjust PID parameters
6. Automatically track speed of mianframe, and after power on it will go to zero point pf tensity balance bar
|
|
Is a user-configurable crystalbased PLL integrated circuit. It includes a digital phase detector, op-amp, VCXO and additional integrated functions for use in digital synchronization applications.
Applications:
- Frequency Translation
- Clock Smoothing
- NRZ Clock Recovery
- DSLAM, ADM, ATM, Aggregation, Optical Switching/Routing, Base Station
- Low Jitter PLL's
Features:
- Output Frequencies to 65.536 MHz
- 5.0 V or 3.3Vdc Operation
- Tri-State Output
- Holdover on Loss of Signal Alarm
- VCXO with CMOS Outputs
- 0/70° or -40/85°C Temperature Range
- Ceramic SMD Package
- RoHS/Lead Free Compliant
|
|
|
|
|
|
AF-300 Mini Micro Drive
5540The AF-300 Mini Drive is a compact, but powerful and easy to use AC variable frequency drive. The drive is available in its standard configuration that includes built-in dynamic braking control, single turn potentiometer for speed reference and LED display.
Features and Benefits
* Simplified dynamic torque vector control
Provides step response and low speed control
* High starting torque
Capable of carrying heavy loads like conveyers and mixers
* Compact design
Fit easily into a limited space
* Available with built-in EMC Filter
Provides CE Compliance in compact design
* Automatic energy-saving function
Reduces motor loss and electric costs
* Predictive maintenance features
Drive cooling fan run time and alarm at recommended replacement and Internal Capacitor predictive alarm calculates expected life and can alarm for recommended replacement
* PID control function
Decreases difference between measured value and target value during instrumentation control of fans and pumps
* Soft-switching IGBTs
Allows use with standard general purpose motors
* Optional Modbus RTU RS485
Allows low cost system integration using the RTU protocol with the addition of the RS 485 Option Card
* Inrush current control circuit
Allows use of smaller upstream peripheral equipment such as fuses, circuit breakers, and contactors
* Compliance with major international standards
Assurance of smooth integration with global equipment requiring CE, TUV, UL, CUL
|
|
Frequency inverters for 3-phase asynchronous motors from 0.18 to 2.2 kW
Description
100... 120 V / 200... 240 V single phase
200... 230 V 3-phase, 50/60 Hz
Speed regulation by flux vector control
Speed range from 1 to 20
Protection of drive and of motor
Robustness even in severe environments from -10 to +50°C
Through wiring and connection using captive screws: simple replacement of electromechanical solutions
Compact, side by side mounting
DIN rail mounting possible
Integrated class B EMC filter or available as an option
Very low leakage current of drive compatible with 30 mA differential circuit-breaker for assured protection of personnel
Baseplate mounted version available
|
|
Frequency inverters are used for electronic speed control on machine drives. The needs of the market are wide and varied, and we can offer a homogeneous range of standard products for everything from simple speed control to complex applications with high requirements in respect of drive behaviour and functionality. Our drives are reliable in respect of operation, flexible in terms of application, easy to commission and meet high standards of quality. We can provide a solution to suit any requirement in the power range between 0.25 and 400 kW.
|
|
|
|
|
|
Inverter ESM and Agy-EV series
Inverter ESM series
The ESM are advanced technology Inverters , featured by an extreme easiness of use and by a very good quality/price ratio.
They are available in 18 sizes , from 0,37 kW up to 2,2 kW in single phase version and from 0,37 kW up to 22 kW in three phase version, for output frequencies up to 240 Hz (1000 Hz by request )
Three on-board functions and relatively few parameters make their programming extremely easy.
An EPM module, on purpose designed for this series of Inverter, will store the setting parameters on a programmable chip, placed on the front panel of the unit and easily replaceable in case of a modification.
Inverter Agy-EV series
They are General Purpose Inverters , destined to the speed variation of AC motors , where high starting torques and/or very low speeds are needed.
Available in a big number of sizes , for output power from 30 kW up to 200 Kw (other lower kWs are available by request ), the following versions can be delivered:
1. Agy-EV and 4A , for three phase supply 230 ÷ 480 V , 50/60 Hz , up to 200 kW
2. Agy-EV 5, for three phase supply 575 V , 50/60 Hz, up to 140 kW.
The wide range of options and fittings allows a great flexibility of configurations for different applications.
The Agy-EV Inverters can be interfaced to the following field buses :
PROFIBUS, CANopen and DeviceNet.
|
|
The Honeywell NX Series drives have been built on the principles of Software and hardware modularity. The power unit utilises the most sophisticated semiconductor technology, with highly modular construction that can be adapted to a customer's specific requirements.
Typical power options include input and output filters, brake resistors together with IP21 (NEMA1) and IP554 (NEMA12) enclosure types.
Two types of control units are available - the standard sensor-less vector control unit, which has performance that is usually sufficient for most applications. The closed loop vector control unit has servo type performance for more demanding applications - e.g. cranes, lifts, multiple synchronised drives.
|
|
|
Frequency converters specif cally developed for the drive of a high frequency spindle. Innovative technology combined with our spindles leads to a high measure of operating safety and reliability. We guarantee optimal performance.
|
|
Speed – Commander frequency converter
The SPEED COMMANDER is a static FREQUENCY CONVERTER for infinitely variable speed control of three-phase motors
Range of power :
* 0,75 kW - 1,5 kW / 1 x 230 VAC
* 1,1 kW - 11 kW / 3 x 400 VAC
|
|
|
|
|
|
b maXX 1000 - Frequency converter
In designing the b maXX 1000, Baumüller has focused on providing a range that is consistently easy to use. The b maXX 1000 offers an integrated EMC filter as standard, for compliance with the applicable EU standard (EN 55011A/Second Environment).
Numerous protective and overload functions, such as phase failure detection on the line and motorside, ensure error-free operation. Comprehensive control and data management constantly provides a precise overview of the current drive status.
The b maXX 1000 is also equipped for wide-ranging applications, thanks to its 15 different preset speeds. Its adjustable pulse width modulation, from 1 kHz to 15 kHz, also means that it emits barely any noise during operation.
It can achieve a rotating field frequency of between 0.1 Hz and 400 Hz, meaning that even multi-pole machines can be operated in a high speed range.
The b maXX 1000 can be connected to CANopen, the premier open fieldbus system.
It is also able to work as a motion control slave, due to its integrated protocols.
|
|
|
Now you can get the complete “package” from Mitsubishi – we develop, engineer, manufacture and service AC variable frequency drive packages. Our package contains a complete variable frequency drive assembly with options selected from an extensive menu, including circuit breakers, contactors, plug-in options, pilot devices and much more – all mounted and wired in a robust enclosure. Our packaged drives come to your facility with “As Built” documentation, pre-tested and ready for installation and wiring.
|
|
|
Many industrial applications as well as naval power systems require a power supply with a frequency of 60Hz even in countries using 50Hz in general. The PILLER UNIBLOCK UBSF is a unique frequency converter, that combines the benefits of a robust synchronous generator with state of the art control features for most reliable and efficient operation.
|
|
|
Electronic Controllers are today standard for highly sophisticated drives. The WEG electronic program contains specific electronic controllers for Single-Phase Motors and for all D.C. Motors. All versions are robust controllers for industry purposes to be fitted in the switch cupboard. With regard to the general technical progress in the technology of semiconductors and microchips, our electronic controllers will be permanently improved.
|
|
SIMOVERT MASTERDRIVES/SIMODRIVE 611 universal
Standard drives with integrated safety relay
Together with the Siemens synchro-servomotors or asynchro-servomotors, the frequency converters SIMOVERT MASTERDRIVES and SIMODRIVE 611 universal offer powerful and cost-effective drive solutions for all industrial sectors. Their compact and modular design makes them ideal for a wide range of applications, such as applications in the printing, packaging, textile, wood and glass industries.
The standard drives support a Safety start inhibit with a safety relais integrated in the frequency converter. A "Safety stop" function can be implemented when this is used in conjunction with an external RC circuit .
|
|
Output components for motor protection and the improvement of system reliability, availability and functionality. Deployed at the output side of frequency inverters, these filters ensure reliable operation by avoiding expensive downtimes of installations, manufacturing plants, machinery and
a vast array of other industrial and domestic motor drive applications due to premature motor damage. An appropriate output solution will even allow the deployment of unshielded motor cables, the use of multiple motors in parallel on the same drive or the retrofit of modern drives in existing installations with old motors and unshielded cabling.
|
|
|
|
|
|
FOVT dV/dt Output Filters
Features:
dV/dt Output filter
* Three phase output filter for converters.
* Minimizes frequency converter dV/dt values.
* For long motor cables.
* Reduces motor heating.
* Increases motor life.
General specifications
* Maximum operating voltage: 550Vac ± 15.
* Operating frequency: DC - 60Hz.
* Hipot test voltage:
- L/N-›PE: 3000Vac 2s.
- L-›N: 2250Vdc 2s.
* Application class: HPF Acc. TO DIN 40040
* (-25ºC/+85ºC/95% RH, 30d).
* Flammability class: UL 94 V2.
* Inverter switching frequency: 4-16kHz.
* Max. motor cable length: 50m.
Fast switching between inverter IGBTs causes high voltage ramps (> 4.000V/µs) whcih may be even higher in the motor windings. Fast switching also tends to shorten motor life and limits maximum cable lengths.
Using a PREMO dV/dt EMC filter we guarantee the maximum peak voltage will stay under 1.000V/µs, with a dV/dt value < 500V/µs.
Suppressing voltage peaks like this will also reduce EMI interference from the converter, will increase its life and improve its performance.
|
|
EMC Technique
EMC is an important factor for the operational reliability in machinery and plants and ensured the compliance with valid norms and standards.
European norms and standards require manufacturers and users to comply with a set of EMC limitations.
KEB designs, manufactures and supplies a comprehensive range of input/output filters and chokes to comply with all international standards as well as to improve operating conditions.
KEB experts in the field of EMC offer advice and support during the selection process of suitable products. For on-site testing a mobile EMC service is available.
Competent consultation and mobile EMC-measuring means provide the options and optimisation on location - in short - they save in different uses the dependable compliance of the monetary requirements.
|
|
|
|
|
|
Unidrive SP Modular 45kW – 1.9MW
200V/400V/575V/690V
Modular high power performance AC drive
The Unidrive SP Modular Drives Range offers the same advanced feature set as the panel mount drives but with additional power system fl exibility. Drive modules may be arranged to provide a common DC bus system with or without an active input (regenerative, 4 quadrant operation). Very high current motors may be controlled using a multi-drive modular arrangement.
Applications
The Unidrive SPM drives are suitable for applications in both commercial and industrial applications where power scheme flexibility and regenerative energy saving provides an operational advantage.
Benefits
Unidrive SP Modular offers maximum power system design flexibility. Drive modules can be connected together in a variety of ways to create common DC bus systems, active input systems for returning excess energy to the power supply and parallel drives for high power motors. All drive modules are compact for easy handling.
Modular building blocks
The Unidrive SPM range comprises key modules that can be combined elegantly to achieve your design criteria with maximum economy.
|
|
|
Baldor Drives now offers a complete solution to your motor control needs. From basic analog soft starts to full fledged Vector technology, Baldor offers high performance products in an easy to use interface. Drives start at 0.37kW and continue up to 600kW (800Hp). Custom controls can be built up to 1125kW (1500Hp). Each control is designed and manufactured to be the most reliable on the market. Baldor also offers drives from IP20 open type through to fully enclosed IP66 hosedown type units.
|
|
|
|
|
|
Affinity
Dedicated HVAC/R Drive for Building Automation and Refrigeration
1.1kW to 132kW (1.5hp to 200hp) 200V / 400V / 575V / 690V
IP20 (NEMA 1) and IP54 (NEMA 12)
Affinity – A dedicated HVAC/R drive
Affinity is Control Techniques’ dedicated HVAC/R drive, designed specifically to meet the needs of consultants, contractors and owners of commercial buildings. A comprehensive product line incorporates special drive functionality and accessories to simply and efficiently solve your HVAC/R applications.
Drive for a sustainable future
Affinity addresses the challenges for both today and the coming years. It is created with more than 30 years of drives experience and based on new research that considered the current and future issues and trends in the HVAC/R industry. Affinity incorporates the features you need to be at the forefront of building technology in relation to sustainability, reliability, communications and performance.
Helping you to save energy, day after day
Affinity allows you to minimise wasted energy throughout your buildings by optimising the pump or fan speed to match the environmental conditions within the building. This helps to reduce your energy costs and your carbon footprint. Software tools help to analyse the potential energy savings and can provide the justification to make the capital investment with a known payback period.
|
|
|
|
|
|
Commander SK
General Purpose AC Drive
0.25kW to 132kW (0.33 to 200HP) 100V / 200V / 400V / 575V / 690V
COMPACT TO FIT...
Commander SK is a compact drive -
A compact footprint with space saving features.
Commander SK gives you back valuable space with its compact footprint and extra features that can eliminate the requirement for additional components such as EMC filters.
In simple applications the onboard PLC feature saves you money by removing the need for an external PLC and power supplies. Integrated fieldbus options minimise the need for external I/O to interface with the drive.
SIMPLE TO USE...
Commander SK is an easy drive - easy to connect, easy to configure and easy to install.
Easy to connect - All connectors are generously sized and clearly labelled.
Easy to configure - The configuration settings you need for most applications are detailed on the front facia of the drive.
Easy to install - Flexibility allows you to install the drive in the best way for your application: All drive sizes can be mounted on a flat surface; DIN rail fixing integrated on small sizes; Provision for through hole mounting is standard above 4kW. This allows the heat from the drive to be dissipated externally meaning the size of the cubicle can be greatly reduced
Power to perform
Commander SK performs - Reliable and productive with exceptional motor performance as you would expect from a Control Techniques drive.
|
|
|
|
|
|
Unidrive SP
Free Standing
Fully Engineered Cabinet Drives
90kW to 675kW (150hp to 1000hp)
380 to 690V 3 phase
Unidrive SP Free Standing is a range of compact AC drives for high power motors in the range 90kW to 675kW.
The hard work has been done
Unidrive SP Free Standing drives are fully engineered and tested drive cabinets for AC input AC motor output configurations. Proven design and international approvals release your engineering resources to focus on your application.
Ideal for fans, pumps, extruders
Unidrive SP Free Standing drives are suitable for higher power applications, both commercial and industrial.
Much more compact
Unidrive SP Free Standing drives are up to 50% smaller and are significantly lighter than competitors’ ‘compact’ drive cabinets. This makes Unidrive SP Free Standing the obvious choice where space is a problem.
Proven reliability
Unidrive SP Free Standing utilises mass produced modules of proven design and reliability. The modules and cabinets are assembled using a sequential build process that eliminates build variation and provides consistently high quality. Excellent thermal and electrical design and computer modelling has ensured the drives have a long and productive life with trouble free operation.
Easy to maintain
Compact size and innovative design enables the drive modules to be easily accessed and removed for servicing or replacement. Standard modules ensure ready availability of components.
The Unidrive SP range
Unidrive SP Free Standing is a part of the Unidrive SP family of high performance drives: Unidrive SP Panel Mount 0.37kW - 132kW & Unidrive SP Modular 45kW – 1.9MW
|
|
With their cutting edge technology, the Gefran-Siei ARTDrive series of inverters incorporates all the needs of systems integrators, panel builders and machine manufacturers to guarantee the best control solutions in modern industrial automation systems.
A wide range of motor ratings, power supply settings and sector-specific configurations make this a universal solution for all control architectures.
|
|
|
|
|
|
INGEDRIVE® is a family of low- and medium-voltage, modular AC drives, for demanding single-motor or multi-motor applications. They can handle and control synchronous motors, asynchronous induction motors, and permanent magnet motors. These drives are suitable for four-quadrant operation, driving and braking in both rotation directions.
INGEDRIVE®’s modular design enables it to cover a wide range of powers and voltages while its intuitive structure makes it easy to use and maintain.
Years of experience have made it possible to incorporate advanced vector control via optic fibre for two-level rectifiers and inverters for low-voltage equipment and three-level ones for latest generation semiconductors, IGBTs, HV-IGBTs and IGCTs, the result being a safe, flexible and user-friendly interface.
INGEDRIVE® is available with powers from 250 kW up to 27 MVA, and from 400 V up to 4.16 kV, offering great performance, robustness, reliability, and long life expectancy.
The family’s energy-efficient design is a huge factor in reducing energy consumption.
|
|
- DIGIDRIVE SK: variable speed drive - 0.25 to 132 kW
Motor control : U/F Induction mode, open loop vector control mode
Main supply :
Single phase 110V up to 1.1 kW
Single phase 230V up to 2.2 kW
Three phases 230V up to 30 kW
Three phases 400V up to 132 kW
Three phases 575V up to 110 kW
Three phases 690V up to 132 kW
- UNIDRIVE SP: Universal Variable Speed Drive - 0.37 to 132 kW
Motor control : U/F Induction mode, open loop vector control mode, close loop vector control mode, servo, synchronous
Main supply :
Single phase 230V up to 1.5 kW
Three phases 230V up to 45 kW
Three phases 400V up to 132 kW
Three phases 575V up to 110 kW
Three phases 690V up to 132 kW
- PROXIDRIVE: IP66 Variable speed Drive - 0.37 to 7.5 kW
Motor control : U/F Induction mode, open loop vector control mode, close loop vector control mode, servo
Main supply :
Three phases 230V up to 4 kW
Three phases 400V up to 7.5 kW
|
|
Vacon variable speed AC drives
- a perfect choice
To choose the right Vacon variable speed AC drive for your needs, the experienced Vacon personnel is pleased to assist you in making the right decision. We know there are several issues to consider. Therefore, we have the know-how and willingness to help you to concentrate on the essentials.
What kind of an AC drive do you need?
|
|
Advanced AC Drives for Excellent Speed and Torque Regulation.
3G3RX Features:
- Open-and Closed-Loop Vector Control for high performance applications requiring excellent speed and torque regulation such as extruders, winders, and packaging machines.
- High starting torque: 200% at 0.3 Hz (Closed loop) allows zero speed load holding
- Combine AC drive with an encoder for feedback to perform low precision positioning applications.
- Overcurrent and Overvoltage trip suppression reduces nuisance tripping
- Restart Function allows automatic recovery from momentary power loss
- Built-in Radio Noise Filter lowers noise impact on other drives and equipment
|
|
... see all the products in the category
AC drives
|
|
|
