|
|
For fuel cell applications, pure hydrogen generators are not a very good solution as they are bulky, heavy and expensive. Fortunately a fuel cell can run very good on a hydrogen rich stream rather then pure hydrogen. Therefore a fuel processor consisting of a reforming reactor in combination with a shift and prox are a more favorable solution. Also the low storage density of hydrogen or the lack of sufficient hydrogen infrastructure can be a driving force to choose for a more compact on-board fuel processor. Moreover on-board reforming gives a choice to use several (green) fuels, such as methanol, ethanol, biodiesel and DME. In certain stationary fuel cell applications similar needs for on-board reforming exist.
OEM's who need to adapt their products to the new technology of fuel cells are often not well experienced in fuel cell and reforming technologies. HyGear with its extensive experience in reforming technologies and fuel cell system integration can be a partner in developing the required solutions.
|
|
In the last years COELMO® started the developing of new generating sets using Proton Exchange Membrane (PEM) fuel cells fed by hydrogen. COELMO®’s hydrogen-fueled products create high quality, reliable power and offer the security of standby, emergency or uninterruptible power where it is needed most.
COELMO® has developed a backup power generator fed by pure hydrogen for indoor operation. H2POWER – BPG120 is a fuel cell generator powered by Ballard's fuel cell technology.
COELMO® is now developing a natural gas-fueled 2kW combined heat and power generator for the residential market H2POWER – CHP200.
|
|
| ... products without technical information |
| |
... see all the products in the category
Fuel cells
|
The standard production of Induction systems has been therefore enriched with the construction of prototype systems that express our growth in the direction of applied research, and that allow to develop innovative solutions in the induction heating sector.
Induction’s main objective is the application and development of innovative solutions in medium and high frequency induction heating, allowing maximum system reliability together with high technological content.
The personalization of Induction systems, together with Customer interaction, assures an enduring relationship over time, and professional service during the product’s entire lifecycle.
The Induction production line-up is able to satisfy all standard and special requirements of industrial induction heating, by means of an innovative technology that allows to obtain an electrical efficiency close to the theoretic limits.
Induction converters are medium frequency static generators, applied to series or parallel resonant circuits, whose use allows heating though magnetic coupling.
In spite of different circuit solutions, Induction converter performance is assured by continuously updating projects for the tuning of new constructive solutions. Furthermore, the development of control and adjustment power components is in continuous evolution, while all applications are compliant with the norms in force in the area of machine directives.
|
|
| ... products without technical information |
| |
The FX/MX102 is a single-chip device to extract single periodic signals from very high random-noise environments.
Using patented autocorrelation techniques the MX102 will enhance the input signals signal-to-noise ratio by as much as 8.5dB and provide a digital output signal centered at four times (x4) the input frequency.
The amplitude of non-periodic components of the signal is substantially reduced. The patented autocorrelator compares the incoming signal to itself; the more elements of the waveform that are seen as periodic, the higher the energy at the microcircuit output.
The FX/MX102 cascades two autocorrelators, each one improving the signal-to-noise ratio.
|
|
| ... products without technical information |
| |
Electron and Ion Beam
Power Supplies
KSI offers rugged designs intended for difficult applications with frequent arc-over events, providing high performance and high reliability:
- Application specific designs up to 200 kV and 20 kW
- Soft switching resonant topologies for high efficiency, compact size, fast dynamic response, and low stored energy
- Analog, RS-232, or custom I/O interface
- Closed-loop emission current control
- Single or dual filament; fine and/or coarse control
- Low ripple, tight output regulation, and highly accurate repeatability
- Protected against open and short circuits, arc's, overtemperature, overvoltage, and other fault conditions
- Universal input and PFC available
- UL, TUV, CSA agency approval available; CE mark and/or RoHS compliance available
|
|
The LASERGAS nitrogen generator is a truly high range generator thanks to sophisticated technology and exceptional performance.
This unique gas generator is capable of producing nitrogen at very high pressure. It is available in various versions with different outputs, purity and pressure ratings.
The LASERGAS nitrogen generator can be used in any area of industry requiring a medium or high pressure nitrogen supply, or whenever intermittent demand requires large reserves of nitrogen to be kept ready for rapid consumption.
|
|
The Triathler luminometer is a compact, portable, manual instrument for measuring
samples in various vial sizes up to 20 mL in volume.
Key characteristics:
• Large dynamic range, (200 CPS to 50,000,000 CPS)
• High sensitivity, 0.6 10-15 mol/ml ATP
• Portable or regular laboratory use
• 32 character alphanumerical display
• RS-232 port to send out results to a PC or a printer
• Software for MS WindowsR to download the results to file or MS Excel worksheet is included
• 1.5 " head-on PM tube makes very high counting sensitivity possible
|
|
The high voltage generator KNH35 / KNH65 is a robust, all-round supply unit for the Eltex DC charging electrodes and other high voltage applications in industry and in laboratories.
The generator delivers a maximum of 30 kV / 60 kV and is available both with negative and positive polarity.
Versatile use
• Voltage or current constant operation selectable
• High output power with high efficiency
• Remote control and remote monitoring via analog and digital interfaces
(CAN bus, CANopen or Profibus)
• Easy installation
• Minimum space required
Safe operation
• Self-monitoring and alarm function
• Password security
• Programmable voltage/ current limits
• Optional chopped operation
• Fail-safe operating data backup
• Sturdy steel enclosure
• Protection class IP54
Precise work
• Minimum output value deviations
• Good output value reproducibility
Easy operation
• Menu-assisted operation
• Two-line backlight display, messages in plain text
• Large operating keys
• Easy connection concept
|
|
|
|
see the results for the following category
