|
|
Fuel cells have the potential to revolutionize energy conversion and distribution in the medium and long term. Vehicle propulsion, stationary cogeneration of heat and electricity, and power supply in mobile applications are current focus areas of fuel cell technology.
SGL Group develops and commercializes carbon-based products for Polymer-Electrolyte-Membrane Fuel Cells (PEFC):
* Gas Diffusion Layers (GDL)
* Foils used as separator plates for fuel cells and redox-flow batteries (Expanded Graphite)
|
|
Teledyne Energy Systems, Inc. (TESI), is recognized as an industry leader providing innovative PEM fuel cell products, technology, and services.
TESI has one of the longest industrial histories in fuel cell research. Beginning almost 40 years ago with its early demonstrations of alkaline fuel cell systems, TESI and its predecessor companies have been at the forefront of creating high performing stack and system designs to meet real world applications. Industry leading demonstrations have included fuel cell stack and system technology with proven performance in tractors, manned submarines, utility vehicles, automobiles, and residential power systems. Today, TESI offers two distinct products within its Fuel Cell Group, Perry NG Series PEM fuel cell stacks and Teledyne FTU Series power systems.
|
|
|
Rew-Power©AIR is the first reversible fuel-cell hydrogen-air completely realized in Italy. Rew-Power©AIR is a prototype, on small scale, of one fuel cell (fuel-cell) in a position to directly trasfomare the chemical energy of hydrogen in electric power thanks to a chemical process much simple how much effective one, inverse electrolysis. Rew-Power©AIR has been developed for scopes only demonstrated to you and didatti to us.
|
|
|
Rew- Power© SERIES is constituted from three fuels cell in series. Every fuel cell (fuel-cell) is in degree, in the earlier stage, to work like electrolyzer, scindendo the molecule of the water in hydrogen and oxygen through electrolysis. In a second phase the device directly transforms the chemical energy of hydrogen in electric power thanks to a chemical process much simple how much effective one, inverse electrolysis. The platform and the tanks concur of having approximately 3V for amusing applications. Ideal to bind together to Hy STEP-UP© in order to recharge cellular batteries and.
|
|
|
Rew-Power©PLUS is an electrolyzer with portable fuel-cell from 1V with surface of 20cm2. The dimensions allow to have more current in escape from the reversible fuel-cell. The module fuel cell, in the earlier stage, is in a position to working like electrolyzer, scindendo the molecule of the water in hydrogen and oxygen through electrolysis. In a second phase the device directly transforms the chemical energy of hydrogen in electric power thanks to a chemical process much simple how much effective one, inverse electrolysis.
|
|
|
Rew-Power© MAXI is an electrolyzer with portable fuel-cell from 1V with active surface of 100cm2. The more powerful Rew-Power single stack, equipped than support platform. The module fuel cell, in the earlier stage, is in a position to working like electrolyzer, scindendo the molecule of the water in hydrogen and oxygen through electrolysis. In a second phase the device directly transforms the chemical energy of hydrogen in electric power thanks to a chemical process much simple how much effective one, inverse electrolysis.
|
|
|
The fuel-cell Rew-Power Double stack© is the first module reversible fuel-cell more stages. Two reversible fuel-cell elements PEM for greater power in output. Ideal for the application to prototypes, for research purposes, the realization of small installations and applications of small ransom. The reduced weight and the visibility in transparency concurred from the structure in Plexiglas® make of Rew-Power Double stack© the most useful device in case of difficulty in the finding of hydrogen, since with quantitative small you of distilled water it is in a position to producing to then usable hydrogen in the same device in modality fuel-cell. The module fuel-cell is in fact in a position to working like electrolyzer scindendo the molecule of the water in hydrogen and oxygen through electrolysis. In a second phase the device directly transforms the chemical energy of hydrogen in electric power thanks to a chemical process much simple how much effective one, inverse electrolysis.
|
|
|
|
|
|
"Rew Power© to assemble" is the first complete kit which enables you to easy mount and assemble your own Rew Power© reversible fuel-cell. The illustrated instructions manual leads you in a step by step fascinating experience towards energy of the future: make Rew Power© work as a PEM electrolyser and fuel-cell. All in one magic demo kit!
Due to the scarcity of primary energy sources, the increase in polluting emissions, the growing energy demand and the increase in population, a reconsideration of the structure of our energy production and supply system is absolutely compulsory. One possible solution to the problems mentioned above may be provided by hydrogen. In order to obtain energy, hydrogen can be burned directly or used in a fuel cell; in both cases the environmental impact is minimal (the only emission is water) but in the second the advantage lies in high performances.
The fuel cells are devices that allow you to transform, without any combustion, the chemical energy of the fuel directly into electrical energy.
The hydrogen within the fuel cell is combined with air oxygen to produce a molecule of water and electricity.
|
|
|
|
|
|
Rew-Power© is the first reversible hydrogen fuel-cell completely manufactured in Italy!
Rew-Power©, in the new H-Tube packaging, is the complete fuel-cell kit to create and test the use of hydrogen obtained from distilled water and sun! 70 minutes of LED light hydrogen with only 10 minutes of sun! Rew-Power© was born to provide a useful support to individuals, businesses and schools at all levels to experience easily, economic and complete potential of PEM fuel cell technology.
Due to the scarcity of primary energy sources, the increase in polluting emissions, the growing energy demand and the increase in population, a reconsideration of the structure of our energy production and supply system is absolutely compulsory. One possible solution to the problems mentioned above may be provided by hydrogen. In order to obtain energy, hydrogen can be burned directly or used in a fuel cell; in both cases the environmental impact is minimal (the only emission is water) but in the second the advantage lies in high performances.
The fuel cells are devices that allow you to transform, without any combustion, the chemical energy of the fuel directly into electrical energy.
The hydrogen within the fuel cell is combined with air oxygen to produce a molecule of water and electricity.
|
|
|
|
|
|
Hy-Start©, in the new H-Tube packaging, is the complete fuel-cell kit to create and test the use of hydrogen obtained from distilled water and sun! 70 minutes of LED light hydrogen with only 10 minutes of sun! Hy-Start© was born to provide a useful support to individuals, businesses and schools at all levels to experience easily, economic and complete potential of PEM fuel cell technology.
Due to the scarcity of primary energy sources, the increase in polluting emissions, the growing energy demand and the increase in population, a reconsideration of the structure of our energy production and supply system is absolutely compulsory. One possible solution to the problems mentioned above may be provided by hydrogen. In order to obtain energy, hydrogen can be burned directly or used in a fuel cell; in both cases the environmental impact is minimal (the only emission is water) but in the second the advantage lies in high performances.
The fuel cells are devices that allow you to transform, without any combustion, the chemical energy of the fuel directly into electrical energy.
The hydrogen within the fuel cell is combined with air oxygen to produce a molecule of water and electricity.
|
|
| ... products without technical information |
| |
... see all the products in the category
Fuel cells
|
GORE-TEX HPR lining
Lightness
Sole PU+N (Contact heat resistance 300ºC)
ROBUSTA® Slip Resistance Coefficient: 0.28
Non Bending System
Available in S2 and S3
- Steel or non metallic toe-cap
- Steel or Kevlar insole
Shock Absorbant Effect
Etra wide last
Sizes from 35 to 50 (UK Sizes: from 2 to 15)
|
|
Water resistant and technical
The technology of Parabolic® soles by Lemaitre Sécurité combined with the Sympatex® membrane enable to propose safety shoes adapted to all terrains, comfortable, waterproof and breathable.
Regular quality checks ensure the constant quality of the Lemaitre Sécurité Sympatex® range. Each material is chosen with utmost care and is submitted to stringent tests before being used in production.
|
|
Antistatic
EN ISO 20345 S3
Composite non metallic toe cap to 200joule, lighter in weight and more comfortable
Water resistant leather uppers
Rubber sole unit for excellent grip
Breathable moisture wicking linings for extra comfort
Soft padding around tongue and collar areas
Completely non-metallic product, so suitable for areas such as airports,prisons, bonded warehouses etc where security screening occurs
Non metallic midsole providing puncture resistance
|
|
Benefits:
- extremely small total height
- easily compatible with CLEARPOINT® filters
- top-grade design
- all functional components are built-in and well protected inside the housing
- guaranteed drying, as humidity is removed in any case
- no alteration of the usual compressed air composition
- low purge air demand
- service-free, as there are no wearing parts in the dryer (merely the regular change of the filter elements is required)
- no ecologically undesirable drying agents
|
|
S u n s e p use diffusion prinziple for drying air, by a polymere microfibre hollow membrane. The sunsep-w can ensure a dewpoint up to -40°C. Outlet dewpoint depends on the inlet dewpoint temperature.
Type max. capacity Weight Microfilter (Prefilter)
Sunsep at 8 bar a without prefilter
(l/min) (kg) SWC M04-70 030 0,05 G 2 XP
SWC M08-100 70 0,26 G 2 XP
SWC M15-100 120 0,27 G 2 XP
SWC 01-150 200 0,39 G 2 XP
SWC 02-250 300 0,69 G 2 XP
SWC 02-200 400 0,45 G 2 XP
SWC 03-250 450 0,71 G 2 XP
SWB 01-100 200 0,22 G 2 XP
SWB 01-200 200 0,26 G 2 Xp
SWB 05-100 800 0,66 G 3 XP
SWF M06-400 025 0,12 G 2 XP
The regeneration air requirement quantity is 15-18%. Flow rate as well as the regeneration air requirement are dependent on the operating pressure, inlet temperature and the dew-point of the compressed air. The maximum permissible operating pressure is 8.5 bar min/max compressed air and ambient temperature: -20°C/55°C. Higher operating pressures available on request.
|
|
| ... products without technical information |
| |
|
|
|
|
The nitrogen generator was designed spécifi quement to meet the requirements of flows, gas purity and pressure for instruments LCMS. it can be used for evaporations of samples. The nitrogen is produced by using membrane technology, to separate effi cacement the nitrogen of the other gas molecules present in the air ambiant.la falls of pressure is only of 1 bar, making easier the connection of the generator to your own network of compressed air.
Advantages
Improvement of the performances of the instrument the guaranteed constant purity of nitrogen improves the stability of the system and ensures of the reproducible results.
Improvement of the effectiveness of the laboratory volumes of relatively high gas required by instruments LCMS make a food by bottles inappropriate for these applications.
More important economy Return on investment < 1 year. No the hiring of bottles, not of infl ation of price.
Reinforced safety the produced nitrogen with low pressure and room temperature eliminates the dangers associated with the bottles with high pressure and handling from liquid nitrogen. Simple installation the generator can be installed easily. Do not require electricity and can be installed directly on a wall to optimize the place in the laboratory.
|
|
| ... products without technical information |
| |
The HILCO ceramic membrane system is an ideal way to lower your oily-water waste disposal costs. The filtration system utilizes high-velocity fluid “crossflow” across the face of the membrane. The oil-free water passes through the ceramic membrane while the oily waste is concentrated in a process reservoir. Depending on the particular waste stream disposal, volumes can be reduced as much as 20x. The system is designed to accept three different micron-rated membranes (0.2 µm, 0.01 µm, and 0.005 µm) in order to meet all specific local discharge ordinances.
Features and Benefits include:
• High Packing Density
• Broad PH Range of 2-13
• Resistant to Thermal Shock
• Back Flushable
• Immune to Chlorine Attack
• Durable Ceramic Extends Lifetime
• High Surface Area to Unit Volume
• Compact Design
|
|
| ... products without technical information |
| |
Special sheet is manufactured with 1 ply and 2 ply Nylon Farbric Insertion used as Diaphragms for Oil, LPG and solvent resistant applications.
Diaphragm sheet is manufactured with high quality Nitrile Rubber Compound designed for long service. This rubber sheet is reinforced with 1 ply or 2ply Nylon fabric to provide strength. Recommended use for control valves, regulators, pumps etc. They can also be used as weather strip material.
|
|
Electronic switches and controls are operated simply and comfortably by the use of membrane switches with highest functional safety - printed with the modern screen printing technology.
Membrane switches excel due to their space-saving and compact construction, safe function, and last but not least by insensitivity to humidity and soiling. The boundless design possibilities are a further consideration.
|
|
|
... see all the products in the category
Inks
|
|
|
see the results for the following category : 
