|
|
|
|
|
|
AirClean Systems PCR Combination Workstation
AirClean®Systems PCR workstations with UVTect™ microprocessor control, allow you to maintain a Class 100 clean work area during PCR preparation. The AC600 Series LFUV Model has a built-in 254 nm ultraviolet light that allows the operator to irradiate tubes, flasks and pipettes between amplifications. The 254 nm ultraviolet light will effectively destroy potentially contaminating DNA and RNA within minutes. UVTect™ monitors the life of the bulb to ensure proper levels of irradiation.
The workstations feature a unique interlocking sash with a safety overlap to prevent gaps. The sash also has a safety switch that automatically turns off the ultraviolet light and activates the blower and fluorescent light when the sash is raised. This revolutionary uni-body design provides unmatched user protection from harmful ultraviolet rays during the sterilization process. HEPA filtered units have a built-in monitoring system to alert the user when to change the HEPA filter.
|
|
BIGNEAT's PCR UV workstation efficiently protects against contamination by bathing PCR aparatus in sterile air and limiting the risk of contamination from the operators arms, or from equipment bought into the otherwise sterile environment.
Powerful UV lamps are combined with optical reflectors to ensure uniform intensity distribution of the sterilising UV radiation.
1. Superb all round vision
2. Electronic filter saturation indicator
3. Quiet operation
SPECIAL BIGNEAT FEATURE: Fan speed increases when door is opened to maintain air velocity to 0.45 m/s at the front access aperture.
Available 800mm wide as PCR UV cabinet, or as a UV sterilisation cabinet (no HEPA filtration)
|
|
POWERFUL UV DECONTAMINATION
The UV lamp insures a full decontamination of the entire work surface, enclosure walls and PCR equipment.
AN ERGONOMY OF QUALITY
The ergonomy of the working apertures is unique. It enables the protection of the handling while allowing the operator to have access to the entire surface of the enclosure.
ENCLOSURE SIZE ADAPTED TO ALL PCR EQUIPMENT
The Biocap™ enclosures have been sized to receive tube racks, pipettes, minicentrifuges and thermocyclers.
PROTECTION OF THE OPERATOR
The enclosure is 10 mm thick so as to insure a full protection against UV and B rays.
AUTOMATIC SHUTT OFF OF THE UV LAMP
The UV lamp switches itself off automaticaly if the door is opened by accident while the lamp is still active.
*PCR is a patented process owned by Hoffmann-La Roche
|
|
AirClean Systems AC600 Series Ductless Workstations
Our most economical workstation for operator and environment protection. Safely remove toxic vapors, gases, fumes and particulate.
Ideal for:
General chemistry involving small volumes of common chemicals
Tissue staining and processing; e.g. histopathology, cytology
Gluing operations
Solvent cleaning of electronic parts
Soldering applications
School demonstration workstations
Forensic applications - containment of fingerprint powders and chemicals such as ninhydrin and cyanoacrylate
Animal necropsy
Standard Features:
AirSafe™ automatic safety controller
Integral base with deep spill lip
No ducting required
Minimal installation - plugs directly into a standard 110V or 220V electrical outlet Extremely quiet operation < 49dB
All thermoplastic construction with application specific sash, base and enclosure material
Available in “low-profile” or tall version 32” or 48” widths with nominal 24” depth
UL, CSA and CE listed
|
|
The fume cabinet, fume hood and extraction chamber all in one.
Ideal where complete freedom is required to work on several processes at once and where ease of visibilty is essential. Where fumes spread rapidly, for example in draughty working conditions, the Cleancab™ can enclose the source, enabling fumes to be captured before they contaminate the workplace.
Cleancab™ fume hoods: -
Have a shatterproof clear polycarbonate hood
Utilise a chemically resistant base
Include an integral airflow valve
Are heat resistant
Are ESD safe
Are easily cleaned
|
|
| ... products without technical information |
| |
|
The LISA wall-mounted distribution boxes suit applications where low space is available.
|
|
KITS
Amphenol Fiber optic provides termination kits for maintenance on cable assemblies and terminating cable assemblies on single or multiway butt joint and expanded beam connector. These kits contains all necessary tools to terminate connector.
To use the kit with benefits, a minimum training is required.
OTHER FIBER OPTIC PRODUCTS
As part of our Total System Support policy, Amphenol expertise and support are at your service from R&D to prototyping and production of transmission links as well as special devices and cabling or repairs.
|
|
|
The PSSR Universal Patch and Splice Sliding Rack Mount Panel is an excellent choice for applications requiring an extremely compact and easy-to-use design. It is used to patch, or to patch and splice fibers and to provide cross-connection capability. It accommodates up to 24 connections and can use a wide variety of connector types. The panel can be installed in either a 19” or a 23” rack and occupies only 1.75” 1U of rack space. Splice trays and internal fiber management are housed in a sliding drawer that latches securely in both the open and closed positions. Jumpers can exit either to the left or right at the front of the panel.
|
|
FIBRE MANAGEMENT IN CABINET, PATCH PANELS & DRAWER
Optical Fibre Splice Tray Lid
Managed with Radius Control and Dark Fibre Storage
Plain with Basic Storage Facility
Optical Fibre Splice Tray Hinge and Holder
Array Tray and Isolator Clips
Fibre Clips and Coupler Clips
Optical Fibre and Ribbon Fibre Splice Protector
900 Micron Buffered 15-Way Fibre Clip
Optical Fibre Flat Manifold
Strain Relief Boot - 900 Micron Fibre
Quick Panel Mount Strain Relief Gland and Slot In Version
900 Micron Boot and Short Buffered Fibre Boot
Optical Fibre Coiling Clip
Chain Plate
Optical Fibre Support Base, Network Saddle and Expandable Bracket
Dust Caps with Flexible Ties or Metal Chains
Optical Fibre Connector Cutout Adaptor and Cover
Snap Latch
8-Way SC Adapter
|
|
| ... products without technical information |
| |
Data and energy
Unrivalled worldwide, eks Engel presents a new Hybrid Splice Box inside the FIMP product line that makes it possible to combine data and energy.
Furthermore, a new version with a SC-RJ coupling which allows combining multimode, singlemode and POF in one plug will be presented. The front panel of the Hybrid Splice Box can be outfitted with up to four RJ45 Click&Snap-, or alternatively with two Smart Hole-Modules.
|
|
The inner values of the FIMPXL are really convincing and the installation is quite simple and done very fast.
FIMPXL is ready for splicing and it already contains splice tray, couplings, pigtails and cable gland. Regarding different couplings, you can choose from SMA, ST, SC, LC, FC-PC and E-2000. The front panel and the splice cassette can be removed for splicing and since the cassette is magnetic, it can easily be fixed onto a splice unit. The cassette has got a hole for splice units with a bolt.
The powder coated stainless steel housing is also magnetic so that the splice box can easily be affixed to another housing or to a switch cabinet in case of no different tray. Furthermore, FIMPXL has got a clip for DIN rail mounting (35mm) and a kit for wall fastening. Thus, there are space-saving and flexible solutions for mounting our FIMP.
|
|
Mit der Serie FIMP stellt eks Engel eine industrielle Kompakt-Spleissbox für bis zu 12 Lichtwellenleiterfasern vor. Die Box ist spleißfertig bestückt und integriert Spleisskamm, Spleissablage, Kupplungen, Pigtails sowie die Kabelverschraubung. Als Kupplungsvarianten stehen SMA, ST, SC, LC, FC-PC und E-2000 zur Verfügung. Alternativ ist die Spleissbox auch variabel bestückbar.
Durch seine gleichermaßen kompakte wie robuste Bauform und dem Gehäuse in Edelstahl ist die Spleissbox für den Einsatz im rauen industriellen Umfeld prädestiniert. Zur schnellen und problemlosen Montage wird die Spleissbox per Clip auf eine 35 mm-Hutschiene befestigt. Zudem ist ein Kit für die Wandmontage erhältlich.
|
|
|
The OP104 is a modular approach to passive components. By packaging couplers, splitters, WDM, isolators and polarizers into a rugged module test setups can be better organized with less 'floating' fiber and coiled up patch cords.
|
|
Up to 24 channels (48 fibers).
For installation in 19" racks in distirbutors acc. to ISO /IEC 11801, ISO / IEC 24702 and EN 50173 family. Ready to accept all common types of factory or on-site assembled cables. Especially suited to accept our factory assembled OSI PreCONNECT® cabling system.
Two types are available:
fixed installation
telescopic complete-pullout
|
|
|
|
|
|
The CEFEM dust SAFEBLOC ATEX is a cut-off and lock device intended to be used in areas with risk of explosion: zone 21 and 22, for dust "D", according to the EU directive 94/9/EC.
It complies with standards and regulations to ensure the safety of operators involved in the emergency break, the break for mechanical maintenance and the safety break beside any low-voltage circuit terminal.
They are composed of an IM switch disconnector, with a visible cut off, controlled by a right side handle, lockable by three padlocks on OFF position.
A position indicator (ON / OFF or I / O) allows you to view at one glance the position of the switch.
The cut-off system is clearly visible to the operator through a glass window triplex.
These 2mm thick boxes steel are very robust.
A double lock prohibits the opening of the door when the switch is ON and the closure of the switch when the door is open.
Further functions can be equipped according to your specifications: push buttons, lock, cable glands, instrumentation, etc…
Application:
All industries dust ATEX: zone 21 or 22
Cement, Mining, Quarrying, Steel, Paper, and Sugar.
|
|
|
|
|
|
The CEFEM steel SAFEBLOC switch Disconnector is a cut-off and lock device. It complies with standards and regulations to ensure the safety of operators in industry, where the risk is permanent.
The SAFEBLOC enclosure includes a position indicator (ON / OFF or I / O) for a better guarantee of safety.
The cut-off system is clearly visible to the operator and is maintained whatever the circumstances.
These boxes can be installed on machines or close to each engine.
The security features are multiple:
The switch contacts are visible when the switch is open, the mechanical indicator allows to view at one glance the position of the switch, double lock prohibits to open the door when switch is ON and the closure of the switch when the door is open, the handle is lockable by 3 padlocks on ON position.
Further functions can be equipped according to your specifications: push buttons, lock, cable glands, instrumentation, etc…
Application:
In all heavy process industries: cement, mines, quarries, Steel, Paper, Sugar, Glass industry…
|
|
|
|
|
|
CHARACTERISTICS
Switche disconnectors :
IM from 40 to 500 A with right lateral handle and
visible cut-off.
Handle :
Lateral, isolated, red, lockable with 3 padlocks in
« open » position, can not be unfixed from the outside
of enclosure.
Connexions :
Up/Down or Down/Down connection with pre-cabling
of uper terminals using connecting bars starting from
160 A.
Double door interlock :
impossible to open the door when switch is « ON » and
impossible to shut the switch when door is open.
Visible cut-off :
through transparent polycarbonate lid.
Locking :
using isolating screws for locking of the lid, equipped
with hinges. (other lock on request).
Enclosure :
• box with 3 mm thick polyester fibre-glass reinforced,
Colour RAL 7035
• door made in auto-extinguishible transparent
polycarbonate, with no halegen, implemented with
internal hinges, 180° opening on left hand side,
• overall protection :
IP 55 with air vent.
IP 65 on request.
• auto-extinguishible material according to IEC 695
2-1 standards ; fire-proof according to UL94HB.
• temperature resistant : - 35° à + 120°C.
• IK10 shock resistant : 20 joules.
• 4 wall fixations.
Earth connexion :
using 2 earth connections inside the box.
|
|
Camfil Farr offers a wide range of housings in different versions i.e. galvanised or staniless steel. All Camfil Farr housings are always best in class products.
Example of advatages:
* Easy to install
* Modular construction
* No tools needed to change filters
* Gasket to seal between door and filter
* Clamping device for the filter
* Stable and secure design
|
|
|
Suitable for both liquids and gases, these housings are ideal for high flow corrosive applications with 1” to 2” line sizes. A variety of flange connections is also available and the housing can be supplied in exotic materials such as Monel and Hastelloy.
|
|
Filter Houses
The Preferred Choice
Braden filter houses are the preferred choice of OEM’s for new installations and the favorite choice of GT owners retrofitting their systems. With proprietary designs and numerous global manufacturing locations to satisfy local content requirements, Braden can provide an outstanding solution.
• Filter Houses
• Inlet Cooling / Heating Coils
• Evaporative Coolers
• Over 700 Filter Houses Built
|
|
AX-5000 Laser Glovebox Features:
- Turnkey, one-supplier solution
- Pulsed Nd:YAG welding laser 0.25-600W
- Multi-axis motion control system
- Closed-loop environment control
- CDRH, Class 1, eyesafe enclosure
- Standard, configurable and custom solutions
Based on the industry-leading AX-5000, Unitek Benchmark's laser glovebox systems offer precise control of moisture, pressure, and gas composition in the processing environment and are optimized for laser welding sensitive electronic packages such as implantable medical devices and semiconductors. Modular, configurable design ensures that we can meet any manufacturing need or budget.
|
|
Argweld® Flexible Welding Enclosures
The range of 'Flexible Welding Enclosures' has been designed for applications where a rigid chamber may not be economically viable or where space may be at a premium.
Typical applications include:
The occasional and production welding of titanium and nickel alloy components for the aerospace.
Medical instrument and surgical implant manufacturers.
The welding of stainless steel components.
Eliminate the expensive cleaning of discolouration.
Racing car industries.
Apart from the standard models, special enclosures are designed and manufactured to suit all applications.
Experience is available of nuclear and chemical industry applications for the handling of a wide range of products and materials, as well as in the pipeline industry with clam shell models to fit on and off pipes.
Advantages
Operator comfort and ease of use
Very low cost, yet high quality
Fast, easy purge
Bright, shiny, oxide free welds
Frees up valuable floor space
Fast delivery
|
|
| ... products without technical information |
| |
| ... products without technical information |
| |
|
|
|
|
BIGNEAT manufactures enclosures for containment of robotics systems, for OPERATOR protection (LAOP) or PRODUCT protection (LAPP).
For bio-hazard and bio-protection we offer several cabinet types. LABS cabinets offer both OPERATOR and PRODUCT protection at levels of sterility and protection for most drug discovery applications. For more sensitive, or more hazardous applications Bigneat manufactures cabinets to Class II design, providing protection to the essential requirements of BS EN12469:2000.
The need for these types of enclosure is increasing because of the demand in the Pharmaceutical industry for rapid throughput and reliability of biologically sensitive processes and associated bio-hazards - Bigneat is Europe's Number 1 supplier of Robotics and Laboratory Automation enclosures.
Typical applications include for cell culture, cell screening, drug discovery, gene assays, high-throughput screening, rapid microbiological detection systems.
Special features of Biological Cabinets:
. Ducted or recirculatory filtration models available
. Excellent access for maintenance and servicing
. Emergency stop control
. Lighting and UV lamps included
Options:
. Electrical sockets
. Used tips chute
. Leaded acrylic for radiochemistry applications
|
|
|
|
see the results for the following category : 
