|
|
|
|
|
|
A system for the filtration of air in the workplace capable of eliminating oil mist and smoke caused by a variety of metal machining applications.
This solution has a very broad range of possible applications: machining centers, lathes, grinders, millings, screwings…
Thanks to the specific characteristics of the material used, the Newton line assures an extremely high filtration efficiency according to the regulating norms.
The opacimetric tests and lab analysis guarantee reliability and efficiency for the 2 versions available:
95% for the version in which the air is directly conveyed externally to the plant
99.97% for the version in which the air is recycled within the plant.
The Newton line is the ideal answer for:
For the Equipment of Oversize machine tools
5000 m3/h each unit.
Centralized Systems
Modularity is one of the main advantages of the NEWTON line, becoming the most important element for high throughput oil mist filtration systems. By combining several units together it is possible to reach considerably high air flows.
Losma is therefore able to offer tailor made solutions, ideal for centralized systems.
|
|
Use
Reel for the unwinding of the squash-resistant flexible hose in different diameters depending on the vehicle type, supplied with mechanical movement only for fixed or centralized working places or sliding on the extruded duct mod. EC for the positioning near to the vehicle.
The system is designed for the localized extraction from exhaust pipe with suitable rubber or stainless steel AISI 304 intakes resistant to the temperature coming out of the motors.
Technical characteristics
The main components of the ATN series of winders are:
• galvanized steel reel fitted with a special guide to ensure that the hose is correctly wound onto the reel;
• epoxy-painted steel retainer disks fitted to either side of the reel;
• drive system: mechanical TGA hose with various diameters for different requirements;
• EV metal sheet fan (for ATNV models) with various power ratings depending on the required workload.
|
|
Reversit is an exclusive and innovative system of suction and filtration of dusts as a result of professional applications. Designed and realized with the most modern technologies available, it appear to be the only product in his kind for the special structural configuration that allows it to reach very high efficiency of filtration and to mantain them unchanged in time, observing the most strict environmental protection rules.
The modular structure that make Reversit different, starting from three basis structures, in addition to garantee reduced overall dimensions allows a full personalisation of the units depending on the pollutant and on the system demands.
All the versions are planned to be created and certified in accordance with Atex directives.
|
|
|
|
|
|
High-level control of welding fumes
Push-pull systems are the solution when source extraction and hoods are not an option, such as working areas with crane transportation, plants where large pieces of metal are fabricated (and arms are impractical) or workshops where various welding processes take place at continuously changing locations. The push-pull system has been designed especially for heavy industry.
Control your background concentration
Welding fumes rise due to heat. At a certain level – due to the cooling process - the same temperature level will be reached and a fume layer arises. The push-pull system moves this layer in a controlled way at a particular height (usually between four and six metres) where the air is being filtered and re-circulated. This way the smaller particles cannot cool down and return to working level. Which means: less fine dust on your work floor.
Ductwork, the main aspect
The main aspect of the push-pull system is the ductwork. Ductwork can be installed in all kinds of settings, U-shaped or paralleled. To determine the most effective system for your surroundings, you need to consider all aspects; the welding process, the height at which the welding fume layer develops, overall volume and the general construction of your workshop.
BENEFITS: optimum control, prevents accumulation of welding fumes, less fine dust at your work floor, heated air stays within the workshop, thus energy saving, suits almost every heavy industrial working environment.
|
|
|
|
|
|
Smoke and Dust Collector for CNC Laser and Plasma Cutters
The GSP (Gold Series Package) unit is completely assembled and ready to run. The fan, cleaning system, filters and controls are factory assembled.
* 7.5 HP side mount fan rated for 2,500 CFM at 10" w.c.
* Four(4) HemiPleat® HE fire-retardant cartridges with 325 sq. ft. of media each
* Automatic, reverse pulse cleaning system for long cartridge life, prewired to Photohelic® controls.
* Modular construction allows component orientations to be changed
* Spark trap inlet to protect cartridges
* Easy to remove dust drawers
* Easy open access door to cartridges
* Tool-less cam-lock cartridge removal
* View port in sound enclosure to check fan rotation
* Sprinkler Kit
Specifications
* NEMA 4 rating on electrical enclosures
* Cleaning system requires 10 CFM clean, dry compressed air at 90 PSI
* Rugged 10 & 7 ga. construction
* Housing rated for ±25" w.c.
* Weight of collector approximately 2,800 lbs
* Media area = 1,300 sq. ft.
* Efficiency = 99.99% on 0.5 micron
* Silencer designed for 75 dBA maximum .
|
|
|
Filter systems especially made for the laser industry. Suction systems for laser jobs with i.e.metal, wood, plexiglas and gum (cutting, welding, marking etc.)
|
|
Micro Air manufactures a complete line of portable collectors. from the M2150 media collector, for light duty or small volume applications to the MC1500 cartridge collector for heavy duty production.
Cartridge units utilize self-cleaning, high efficiency cartridge filters, that reduce filter replacement costs, as the filter elements are continually cleaned by compressed air. All Micro Air cartridge collectors utilize Micro Air's exclusive Roto-Pulse cleaning system. Because this cleaning system cleans the entire surface of the cartridge, it has proven to be far more effective, than the traditional reverse-jet system, thus extending filter life. Cartridge collectors can also be equipped with HEPA filters or Charcoal Modules.
|
|
| ... products without technical information |
| |
Water Delivery Hose
* The wall is constructed from a rigid PVC spiral encased in flexible PVC
* Stock sizes from 3/4” to 4”
* Black or translucent green
* Lightweight
* Flexible
* Weather resistant
* Durable
|
|
... see all the products in the category
Hoses
|
|
|
|
|
Acetylene Tag-A-Long™ Kit
Portable, Lightweight Oxy-Acetylene Cutting and Welding Outfit
This completely portable lightweight oxy-acetylene cutting and welding outfit weighs less than 32 lbs. and is ready to go where you need it. Compact design stores easily for road travel or when not in use. Ideal for general maintenance, farming, shop, and home use. All brass Oxygen and Acetylene regulators provide efficient and dependable control of gasses. Ergonomically balanced high density polyethylene carrier is extremely durable and includes hose wrap and covered accessories storage compartment. *Cuts up 6" (153mm) and welds up to 1/2" (13mm) with optional tips.
Medium Duty Outfit
Versatile yet economical,
this "HOBART" outfit includes many features found in more expensive outfits. The HOBART TOUGHCUT™ is perfect for a multitude of applications such as farm, ranch, hobby, automotive, refrigeration, light fabrication and repair. This outfit is designed for use with acetylene fuel gas but can operate on propane by simply changing to propane tips. *Cuts up to 6" (153mm) and welds up to 1/2" (13mm) with optional tips.
|
|
Cutting & Welding
3 Table Set-up:
10' Main Vacuum Table
8' (2.44m) Usable Welding Length
10' Filler Table
6x8' Cutting Table
|
|
| ... products without technical information |
| |
| ... products without technical information |
| |
|
|
|
|
Nachi Robotics' Servo Gun provides the best solution for spot welding with improved quality, equipment cost reduction, improved productivity and workplace environment, and weld control improvement. Automatic tip wear compensation provides software equalization. Synchronization of robot and gun yields shorter cycle times. Servo gun reduces peripheral and total life cycle costs. This means a cleaner weld in less time - at less cost.
Features & Benefits
Programmable Stroke Control
Cycle time is reduced
Electrode Pressure Control
Stabilized pressure is maintained
Electrode Position Correction
Automatic compensation for tip wear
Servo Controlled Electrode Motion Profile
Noise from tip impact is greatly reduced
Reduction of Expulsion and Burring
Improved weld spot appearance
Elimination of Gun Pneumatic Supply
Improved energy consumption
Missing Metal Detection
Gun Changers Supported
32 gun maximum and robot transition from 7 to 6 axes (and vice versa)
Robot Equalization Function
Gun's main body can be simplified
Zero Touch Teaching Function
Distortion of metal from gun impact is nearly eliminated
Gun Power Stand -Alone Function
Axis power can be separated from robot for test welding
External Control Signals
Manual operation of Servo Gun
|
|
|
Bug-o Gantry and Side Beam Units are custom designed assemblies that are used in a variety of applications such as automated seam welding, beam and stiffener fabrication as well as cutting applications such as stripping and edge preparation
|
|
| ... products without technical information |
| |
| ... products without technical information |
| |
Features:
-Superior Low Energy Control for Micro Welding
-Ultra Fast Closed Loop Control
-Single Phase Power Supply
-Three Feedback Modes for DC Welders
-Graphical Display and Intuitive DC Welder Monitoring
The UB25 linear DC welder provides unsurpassed levels of control for micro-miniature resistance welding. This DC welder power supply should be used for smaller applications where closed-loop feedback control and fast response times are required. Safety critical applications such as those found in the medical and automotive markets will benefit from UB25’s precision low energy control.
|
|
Low Power Linear DC Welder with Built-in Monitor - UB25
Features:
- Superior Low Energy Control for Micro Welding
- Ultra Fast Closed Loop Control
- Single Phase Power Supply
- Three Feedback Modes for DC Welders
- Graphical Display and Intuitive DC Welder Monitorin
The UB25 linear DC welders (successor to the Unibond II) provide unsurpassed levels of control for micro-miniature resistance welding. These DC welder power supplies should be used for smaller applications where closed-loop feedback control and fast response times are required. Safety critical applications such as those found in the medical and automotive markets will benefit from UB25’s precision low energy control.
|
|
| ... products without technical information |
| |
| ... products without technical information |
| |
Faults in welding tongs or incorrect process parameters in welding can result in production line waste or defective parts. Checking the electrode force periodically permits spark malfunctions to be detected at an early stage so that repairs can be carried out in good time.
The new Type 9833A test sensor allows precise and reliable measurements to be carried out with minimal electrode gaps. The built-in charge amplifier simplifies the task of mounting and helps to ensure the reliability required by the automobile industry.
|
|
The quality of spot welding depends on the force applied by the electrodes as well as on the intensity of the welding current. Within such a control program, the measurement of the force applied by the electrodes is extremely important for ensuring constant production.
That is why we have developed this equipment to measure the closing force of the grips that may be used during the final stage or during periodic maintenance. The end-pieces are interchangeable and can be used to measure force with various shapes of electrodes, the minimum closing dimension being 0.12 in.
This new instrument leverages the robustness, quality and precision of the Centor instrument family, which are specially designed for mobile use in a production workshop.
|
|
|
|
|
|
Testweld™ Hand Held Electronic Force Gauge
An ergonomically designed hand held force gauge.
ADVANTAGES
User comfort "'Ergonomically" designed - for ease of use
One piece unit
Very high accuracy
Swivel head allows access to difficult to reach positions
As with all welding procedures, it is important to eliminate as many variables as possible in order to achieve optimum welding consistently over long periods.
Electrode force is one of the critical parameters in obtaining repeatable, reliable resistance spot welds.
Force can vary because of variable factory air pressure, water in the air lines causing air cylinders to deteriorate and loss of air pressure due to worn seals.
This self contained instrument uses a cell with a force sensor to provide accurate digital read out for auditing weld electrode forces.
Accuracy of this instrument is better than 0.2% and can be switched to read 0-2000 kg, 0-20.00 kN or 0-4400lbs.
In cases of difficult access the head of the swivel head gauge can be swiveled at least ±72º up or down and rotates at least ±90º. Once the desired position is reached it can be fixed by a simple hand tightened knob. A 90 mm long handle is provided for optional use with 2 mountain positions either in-line or at 90º.
A support wrist strap is attached to the gauge so that in the event that it is forced out of the operators hand by misaligned electrodes, it need not fall to the floor and be damaged.
|
|
| ... products without technical information |
| |
QS-AW Collision Sensor
The QS-AW is a dynamically variable collision sensor that operates on an air pressure system.
A regulated air supply provides positive, variable pressure to hold the collision sensor rigid during normal operation. At impact, the air chamber seal is opened, immediately signaling the system controller.
Factory-proven and engineered to withstand the harsh realities of these applications, QS-AW is the collision sensor specifically designed for arc welding, plasma cutting and laser cutting.
Key Benefits
-Positive, variable air pressure to hold the QS-AW rigid during normal operation, resulting in more accurate welds and cuts
-Permanent repeatability
-Detects angular, rotational and compressive forces
-Common mounting flange to work with a variety of torches
-Flat plate or stem mount available
-Built-in harsh environment shielding
|
|
|
|
see the results for the following category : 
