|
|
Atmosphere controlled bell furnace
Designed for aluminising and coating of steel alloy components
Complies with international aerospace standards
Operating temperature : 1200°C
Maximum process temperature 1150°C
Uniform operating zone within the retort : 1500mm (diameter) x 1150mm (high)
Maximum charge weight : 2500kg
Power rating : 250kW
Supplied with 2 walking hearths and an overhead furnace transfer system
Fully programmable gas system with vacuum purge facilities |
|
Bell furnace for heat treatments:
normalizing
annealing
tempering
Plant design according to Customer requierments by team of qualified engineers
- Construction and assembly undertaken by specialised personnel
- Plant commissioning and production assistance on a "Turnkey" basis
- After-Sales Service
- Repair and maintenance intervention on site
- Supply of spare parts
- Technical consultancy services, including operating improvment and calibration |
|
| This Wellman Furnace is used for annealing, brazing, stress relieving, oxide reduction and sintering. Vacuum or controlled atmospheres are available. |
|
REMOVABLE COVER WITH BOGIE HEARTH FURNACE FOR OVER HARDENING
Electric furnace
Power : 900 Kw
Temperature : 1150°C
COVER FURNACE WITH 2 BOGIE HEARTS
Electric heating
Annealing under atmosphere
Power : 300 Kw
Loading capacity : 4000 Kg
Temperature : 950°C |
|
Electric Bell Furnace
The Lindberg Rod Overbend (RO) Element Bell Furnaces give you flexible, efficient performance in a variety of heat-treating applications. The fast heating rate, heavy load capacity, and reliable operation help you achieve fast turnaround and high productivity. The furnace is very simple and economical to operate, and is available in a wide range of sizes.
Features / Benefits
Standard endothermic atmosphere system
Emergency nitrogen gas purge circuit activates on power failure or loss of atmosphere
Atmosphere tight continuously welded hood assembly
Low watt-density RO elements for long life
RO elements have round cross-section for excellent long-term stability with minimal resistance to change
Easy-loading chamber
Complete, pre-wired free standing control panel with disconnect switch
SCR power control
Excess temperature instrument
Designed to meet FM, IRI, OSHA, and NFPA requirements
Ceramic fiber block insulation reduces power consumption and boosts your productivity and efficiency with faster thermal cycling and reduced heat loss
Guide posts to ensure proper alignment of heating bell on base
Applications
Annealing
Austempering
Carbonitriding
Carburizing
Hardening
Martempering
Preheating
Solution Treating
Stress Relieving
Tempering
Normalizing |
|
| ... products without technical information |
| |
... see all the products in the category
Furnaces
|
RAD-CON Inc. specializes in bell-type batch annealing furnaces for the ferrous and non-ferrous, wire and strip industries. RAD-CON is a global leader in bell-type batch annealing technology, with installations worldwide.
Our vacuum purge system rapidly reduces the contaminant levels to facilitate the brightest finish possible. Systems can operate using 100% hydrogen or a mixture of hydrogen and nitrogen to accommodate a variety of alloys. RAD-CON’s team of engineers, metallurgists, and technicians work closely with non-ferrous customers to support and optimize their cycles based on the needs of copper and brass annealing.
|
|
RAD-CON Inc. specializes in bell-type batch annealing furnaces for the ferrous and non-ferrous, wire and strip industries. RAD-CON is a global leader in bell-type batch annealing technology, with installations worldwide.
RAD-CON is the premier choice for Cold-Heading Quality wire producers. The 100% Hydrogen Super-High Convection™ system along with the AC/APEx™ atmosphere control system increase productivity while lowering operating costs. These innovative and proven technologies coupled with economical solutions to customers’ applications make RAD-CON the preferred brand for CHQ.
RAD-CON also services other steel wire processors. RAD-CON designs the best possible solution for specific annealing requirements based upon the customers’ needs. Providing 100% hydrogen systems, nitrogen systems, direct-fired furnaces or radiant-tubes, RAD-CON has a design for any situation.
|
|
| RAD-CON Inc. specializes in bell-type batch annealing furnaces for the ferrous and non-ferrous, wire and strip industries. RAD-CON is a global leader in bell-type batch annealing technology, with installations worldwide. |
|
| LOI is the world leader in HPH (High Performance Hydrogen) bell-type annealing plants. More than 2,000 HPH annealing basis have now been installed throughout the world |
|
| ... products without technical information |
| |
A full range of manual shrinwrapping machines with the best ratio price/performance. Four models with the same features aimed at satisfying customers having different needs. Six working programs available directly by the electronic control panel that drive all machine functions.
Patented system with transparent hood to get both sealing and shrinking in one only operation (without tunnel); sealing at impulse adjustable blade, security thermostat with warning signal to find out troubleshootings, two working positions (sealing only or sealing+shrinking), sliding trolley and adjustable working surface, micropuncher included.
|
|
This model is the culmination of years of experience and knowledge gained by Minipack in its aim at optimising and improving airflow in its chamber machines .
Synthesis inox is ideal to pack pizza, bread, cookies and pastries.
The new worldwide patented ventilation system placed on machine rear allows a steady temperature without overheating.
Easy wipe clean due to absence of motors, of fans and felt on chamber botton, greater efficiency with different kinds of film; sealing + shrinking or sealing only modes, up to 20% power savings. |
|
| ... products without technical information |
| |
PPH 308 - Automatic bell spraying with rotating bell
The PPH 308 automatic bell atomizer use centrifugal force to ensure uniformity, deep penetration and spraying.
With their spraying fineness, transfert efficiency and ease of implementation and adjustment, the PPH spray guns guarantee both a high level of productivity and a superb quality finish.
The PPH 308, equipped with magnetic turbine has been designed for the electrostatic application of water or solvent-borne liquid paints in general industry.
Equipped with EC 65 bell specially designed for the application of high solids and metallic paints electrostatically.
|
|
| A closed loop current sensor consists of a Hall generator mounted in an air gap of a magnetic core, a coil wound around the core and a current amplifier.The current carrying conductor placed through the aperture of the sensor produces a magnetic field that is proportionate to the current. This field is concentrated by the core and sensed by the Hall generator. The Hall generator is connected to the input of the current amplifier, which drives the coil. The current through the coil produces an opposing field to that provided by the current through the aperture Thus the flux in the core is constantly driven to zero. The coil connects the output of the sensor. Therefore the output is a current proportional the aperture current multiplied by the number of turns on the coil. A sensor with a 1000 turn coil provides an output of 1mA per ampere. The current output is converted to a voltage by connecting a resistor to the output of the sensor and ground. The output of the sensor and ground. The output is scaled by selecting the resistor value. Closed loop sensors measure dc and ac currents and provide electrical isolation. They offer fast response, high linearity and low temperature drift. The current output of the closed loop sensor is relatively immune to electrical noise. They are the sensor of choice when high accuracy is essential. |
|
| The line of industrial current sensors offered by Sypris Test and Measurement covers a wide variety of features. Several of these sensors offer 4-20mA output levels, while some offer unidirectional voltage output. Many of these devices have clamping apertures, which means that they may be connected to existing cables, without having to break their circuit. Some of these devices only measure AC currents, while others measure various levels of AC and/or DC current, and provide a switched level detect output. All of these devices are panel mounted, and most have jumper adjustable full scale ranges. |
|
| An open loop current sensor consists of a Hall Sensor mounted in an air gap of a magnetic core. The current carrying conductor placed through the aperture of the sensor produces a magnetic field that is proportionate to the current. The field is concentrated by the core and measured by the Hall Sensor. Most open loop sensors contain circuitry to provide temperature compensation and calibrated high level voltage output. Open loop current sensors measure DC and AC currents and provide electrical isolation between the circuit being measured and the output of the sensor. Typically, open loop sensors cost less than closed loop sensors. They are preferred in battery powered circuits due to their low operating power requirements. |
|
* Hermetically Sealed Type:
A Hermetically Sealed Type motor utilizes windings of standard construction and insulation thickness. The windings are encased and Hermetically Sealed within the external shell casing on the outside and an internal tube or liner inside the bore. The Hermetically Sealed enclosure eliminates the possibility of water leakage into the winding. The liquid medium circulates between the rotor and stator liner providing lubrication and cooling to the bearings.
* Wet Winding Type :
A Wet Winding Type motor is one in which the motor windings are in direct contact with a liquid medium. The medium is clean, clear water. A pressure balancing system prevents exchange of the motor liquid medium and well water due to thermal expansion and contraction when the motor is operating. The liquid medium fills the inside of the motor and surrounds both the stator windings and the rotor. A completely waterproof insulation is used on the magnet wire used for the stator windings. The liquid medium inside the motor air gap and coils acts as a heat transfer device by circulating through the windings and transferring heat to the external casing. Dissipation of this heat occurs as the well water flows at a required velocity over the external case. As is the case in all submersible type motors, the internal liquid medium is also used for bearing lubrication. |
|
Multi-stage Vertical Turbine Pumps with bronze impellers and cast iron bowls. The lineshaft turbine pumps have above-ground discharge with water-lubricated lineshaft bearings. The column pipe coupling has bronze centering spiders with fluted-rubber lineshaft bearings. The bowls are vitra-glass coated in the waterways for improvedefficiencies. Capacities up to 10,000 GPM with heads to 150 feet per stage.
APPLICATIONS:
COOLING TOWERS, PRESSURE BOOSTING AND GENERAL WATER SERVICE. |
|
Bell & Gossett's complete line of in-line and base-mounted centrifugal
pumps can handle virtually any HVAC requirement. The pumps are
engineered for exceptional performance and rugged durability. They are
designed for easy maintenance and to be highly efficient. The pumps
provide reliable operation in a variety of applications, including hydronic
heating and cooling systems, industrial, refrigeration, cooling towers and
irrigation. All B&G pumps are manufactured at an ISO 9001-approved facility. |
|
Multi-stage Vertical Turbine Pumps with bronze impellers and cast iron bowls. The lineshaft turbine pumps have above-ground discharge with water-lubricated lineshaft bearings. The column pipe coupling has bronze centering spiders with fluted-rubber lineshaft bearings. The bowls are vitra-glass coated in the waterways for improvedefficiencies. Capacities up to 10,000 GPM with heads to 150 feet per stage.
APPLICATIONS:
COOLING TOWERS, PRESSURE BOOSTING AND GENERAL WATER SERVICE. |
|
- Model BPX brazed plate heat exchangers offer the highest level of thermal efficiency and durability in a compact, low cost unit.
- The corrugated plate design provides very high heat transfer coefficients, resulting in a more compact design.
- The unit's stainless steel plates are vacuum brazed together to form a durable, integral piece that can withstand high pressure and temperature.
- The BPX heat exchangers offer a compact design compared to shell and tube exchangers. |
|
GPX Plate and Frame Heat Exchangers :
GPX technology offers maximum efficiency in less space, with outstanding application flexibility.
Innovative plate design allows GPX heat exchangers to provide more heat transfer using less space. They perform with one-third to one-fifth the surface area of conventional shell and tube heat exchangers designed for the same application. |
|
| A Hermetically Sealed Type motor utilizes windings of standard construction and insulation thickness. The windings are encased and Hermetically Sealed within the external shell casing on the outside and an internal tube or liner inside the bore. The Hermetically Sealed enclosure eliminates the possibility of water leakage into the winding. The liquid medium circulates between the rotor and stator liner providing lubrication and cooling to the bearings. |
|
|
