|
|
Controlled Atmosphere Brazing systems for the Nocolok (aluminium) and CuproBraze (copper) processes.
SECO/WARWICK supplies:
-Small batch vacuum purge furnaces
-Semi-continuous systems for infrequent demand
-Continuous systems for large-lot production
Applications:
Heat exchangers for the automotive and HVAC markets:
RADIATORS - CONDENSERS – OIL COOLERS – EVAPORATORS – HEATERS – CHARGE AIR COOLERS
SECO/WARWICK worldwide is the exclusive supplier of CAMLAW equipment, service and parts.
|
|
SECO/WARWICK Corporation is a premier manufacturer of aluminium heat treat and melting furnace systems. Our product lines include:
- coil/foil/wire annealing furnaces,
- billet homogenizing furnaces,
- ingot pre-heat furnaces,
- solution heat treat lines for aluminium castings, extrusions and plate,
- reverb melting & holding furnaces
SECO/WARWICK is a full service supplier with manufacturing facilities in central Europe, beginning with initial support services – feasibility studies, facility analysis and planning – continuing through equipment manufacturing, system installation, furnace start-up and personnel training. SECO/WARWICK provides services through a worldwide network in the United States, Poland, UK, China, Russia and Belarus. The manufacturing facilities in Poland and the United States are ISO 9001 certified.
|
|
Wisconsin Oven Corporation manufactures the highest quality conveyor ovens for processes such as tempering, annealing, curing, preheating, and drying, and many others in almost every industry.
A Wide Variety of Oven Configurations: Wisconsin Oven manufactures a wide variety of belt conveyor ovens, including flat belt style, chain conveyors, chain-edge, mesh belt, serpentine, chain-on-edge, slat type, and other arrangements, as well as multi-tier conveyor ovens. We can also design an oven to accommodate your existing conveyor. Please contact us if you have a special requirement.
Belt conveyor ovens are commonly used in the shrink film packaging industry as shrink tunnel conveyor ovens. |
|
| Furnaces with room 1250°C with door with vertical opening. Standard sizes of 50 liters to 1000 liters. Possibility of inserting a ceramics or heat-resisting steel pulley block to work under gas of protection. |
|
chamber furnace with supports Furnaces & Ovens
Chamber furnaces 1100° c
Standard product range from 50 to 2000 liters. |
|
Universal precise electric furnace SNOL 360/1150 is designed for metals and other materials heat treatment.
• Micro processor temperature controller
• Chamber build from refractory bricks and ceramic fiber
• High quality thermoinsulation materials
• Vertical door opening
• Door safety switch
• Low power consumption
• One year limited warranty and later service
• Two years limited warranty for temperature controller and later service
|
|
Controlled Atmosphere Brazing systems for the Nocolok (aluminium) and CuproBraze (copper) processes.
SECO/WARWICK supplies:
-Small batch vacuum purge furnaces
-Semi-continuous systems for infrequent demand
-Continuous systems for large-lot production
Applications:
Heat exchangers for the automotive and HVAC markets:
RADIATORS - CONDENSERS – OIL COOLERS – EVAPORATORS – HEATERS – CHARGE AIR COOLERS
SECO/WARWICK worldwide is the exclusive supplier of CAMLAW equipment, service and parts. |
|
| Electric furnaces of 100°c with 1250°c for all types of treatment with or without controlled atmosphere. A whole range of furnaces of a capacity of 2 liters to 100 liters. |
|
Systema spa has got a Division for the production of gas ovens for heating, drying and dehumidification using its own exclusive technology with the gas burner BAF used with special heat exchangers in special steel: this Division is called Comex Group.
This new range of ovens offers great advantages because they can be designed on measure and on specific request of the client.
Ovens have been produced for the sectors of foundry, varnishing, food industry, wine production, dairy farming .
Our handling and varnishing systems with automatic control of the density, drying and handling of the materials have the advantage to guarantee a high quality and continuous cycle of the production.
With this new technology of ovens with gas heat exchangers there is also the advantage of a prompt investment return, because the thermal KW produced by the gas is economically more convient than the electric thermal KW, and with less problems of energy supply.
In fact, the natural gas or LPG is everywhere in quantity at a convenient price while the electric energy, in addition to be more expensive is difficult to be found in quantity for industrial productions.
Contact us to take advantage of this new technology. |
|
CF and CDF High Temperature Infrared Furnaces for Firing & Drying
The new Despatch CF and CDF Series infrared furnaces are ideal for process applications that require rapid ramp-up and cool-down rates as well as provide consistent quality—as required in photovoltaic cell production.
Very fast ramp rates optimize contact formation on silicon wafers with shallow emitters and silicon nitride coating. Rapid heating and cooling allows firing the contact through the silicon nitrate while rapid cooling prevents damage to the junction. The rapid heating and cooling requires faster belt speeds which enhances throughput as a secondary benefit.
All models feature the most advanced ergonomic designs available, to speed maintenance and minimize downtime. With the push of a button, the entire chamber lowers for easy accessibility—no disassembly or expensive service calls for cleaning and maintenance. All electronic components are situated at eye level for easy and safe access. |
|
The use of induction furnaces for heating material that must undergo subsequent deformation by hot pressing, is now a consolidated practice that offers great advantages with respect to traditional heating systems such as gas furnaces, resistance or radiant panels furnaces, etc.
The great advantage in the pressing sector, where the heating process for work material is required continuously, is the total absence of pre and post operation downtimes. Other advantages include rapid reaction times to any temperature variation, rigorous reproducibility of operation parameters, easy automation of the entire line, easy adaptability to the different production needs of presses, hammers, forging machines, etc.
The electrical power required by the induction system depends on production needs, on the temperature, and on the cross-section and the type of material being heated. With regards to this last aspect, we would like to emphasize that furnaces can be built for any metallic material ( ferrous or non ferrous ) and of any cross-section ( circular, squared, tubular, flat, etc. ). |
|
Pit furnaces ELTERMA S.A. Seco/Warwick Group Poland are used in the following heat treatment and heat-chemical treatment:
- Gas carburizing
- Carbonitriding
- Normalizing
- Hardening
- Tempering
- Annealing.
The range of their application is very wide; they can be used for heat treatment of small components in the high volume production as: gear wheels, cogs, sleeves, shafts, rings, bolts, pipes, casting moulds. They are also used in heat treatment of heavy loads (individual production), as subassemblies for example. the components of the undercarriages, rolled rolls.
Available design versions of pit furnaces manufactured by ELTERMA S.A.:
- Pit retort furnaces (to work with the controlled atmosphere) and non-retort furnaces (to work with the natural air atmosphere)
- Pit retort furnaces with the closed bottom retort (for load treatment which weight is up to 3.000 kg) and with fixed hearth (for load treatment within the range of 3.000-15.000 kg)
- Alternative variants of the heating systems – electrical and gas ones.
Every time, the elements of the technological line are established in accordance with the Client’s requires and conditions of the technological process.
For more information please contact: B.Tustanowska@elterma.com.pl
|
|
Gas or Electric Heat
Wisconsin Oven Corporation designs and manufactures Electrically Heated and Gas Fired Pit Furnaces. A Pit Furnace is ideal for solution treatment, tempering and the heating of any densely packed load carried in a cylindrical basket. We offer designs for basket diameters to 48" and maximum temperature ratings to 1,400°F. |
|
Pusher furnaces ELTERMA S.A. Seco/Warwick Group Poland are the optimum design solution for the heat treatment and heat-chemical treatment processes of mechanical components for mass and high volume production.
Complete unit consists of:
- electrically or gas heated heating chamber
- the chamber of load cooling to the ambient temperature and the loading and unloading devices .
Both the whole transport of the load inside the furnace and the other functions are fully automatic, controlled by the programmable logical controller and the computer system enables to archive and identify individual load according to strict standard requirements for the automotive industry.
Elterma S.A. offers product with optimal solution of the chamber for controlled cooling of the load, the critical value for the whole heat treatment process of the components. Combined transport system of the load in the furnace consisting of the hydraulic pushers and chain pushers meets the optimal requirements as for the quality of the operation, reliability and gives more free room in the shop floor.
For more information please contact:
B.Tustanowska@elterma.com.pl |
|
Technical data :
Types : 4,5/650S 17/650M 48/650L
Max. temperature : 650°C 650°C 650°C
Frequency: 50Hz 50Hz 50Hz
Voltage : 3x400V 3x400V 3x400V
Power : 3,5 kW 6 kW 9 kW
Weight of the furnace : 120 kg 280 kg 450 kg
Useful dimensions Ø95 mm Ø140 mm Ø250 mm
of the retort H 200 mm H 300 mm H 400 mm
Useful dimensions Ø 150 mm Ø 250 mm Ø 350 mm
of the furnace : H 250 mm H 350 mm H 500 mm
External dimensions : W 600mm W 690mm W 840mm
(±10%) H 940mm H 1100mm H 1400mm
D 700mm D 790mm D 945mm
Equipment :
- Metallic casing containing the insulated ceramic fibre (according to directive 97/69/EC).
- Heating by cartrige heaters.
- Inner parts of the furnace made in stainless steel.
- Turbine for air convection integrated at the bottom of the furnace.
- Digital temperature control unit (sizes 17/650M and 48/650L are equipped with a system of temperature control by cascade, master/slave).
- Rack for 2 retorts mounted at the side of the furnace.
- Retorts with turbine for gas circulation (for sizes 17/650M and 48/650L). |
|
Depending on the type of charge loading and workpiece geometry, there may be dead zones around the charge not seeing any flow or surfaces exposed to most of the cooling gas. To solve this problem, Ipsen has designed a rotary hearth for vertical furnaces whose speed of rotation can be adjusted in line with cooling requirements. This eliminates uneven gas flow distribution.
|
|
Rotary hearth furnaces ELTERMA S.A. Seco/Warwick Group Poland are used mainly in the following processes:
- Hardening
- Annealing
- Preheating before forging
- Preheating before hardening in the press.
ELTERMA S.A. manufactures the wide range of furnaces with a rotary hearth:
- in electrical and gas fired version
- for load up to 1.000 kg gross weight
- with manual and automatic loading of the charge.
ELTERMA S.A. rotary hearth furnace can be used in all processes where it is required the very good temperature distribution in the heating chamber and if the Customer needs the high capacity of the process at limited space of workshop.
For more information please contact:
B.Tustanowska@elterma.com.pl |
|
Rotary retort continuous furnaces are used to harden, carburize and carbo-nitride relatively small parts. Automatic loading and unloading make the continuous rotary retort system well suited for high production requirements. Selas rotary retort furnace systems are especially efficient in the production heat treating of automotive fasteners, ball and needle bearings, bolts, roller chain, nails, nuts, screws, sockets, and washers.
STANDARD MECHANICAL FEATURES
Fabricated alloy retort with load-conveying flights
Externally mounted retort support rollers
Gasketed removable rear plug assembly
Load feeder chute with flame deflector and continuous atmosphere ignition pilot
Atmosphere inlet and sample ports
Sight port for visual check of discharge |
|
| Small multifunction furnace up to 1150°c. PID controller and clock. Swiss made hight quality product. |
|
MINI OVEN “JOLLY”
This dryer is designed for the fast drying of serigraphic dissolvent ink or water ink on various applications. Easy operation and maintenance and high drying efficiency are the main characteristics of this machine.
Endowed of kappa for aspiring attack, mounted on 4
Self-locking wheels.
Dimensions: tape length 150 cm, Height from earth 80 cm, Weight 87 kg. |
|
Maximum operating temperature 750°C
Chamber capacities of 22, 112 & 324 litres
Heating is provided by resistance wire elements on both sides of the chamber
Powerful centrifugal fan and air guide system forces air over the elements & back through the chamber to ensure good thermal uniformity
Easy clean stainless steel inner chamber
Choice of PID controller or programmers
Applications in general industry include, low temperature ferrous metal heat treatment processes; annealing, tempering, normalising and stress relieving |
|
Atmosphere controlled bell furnace
Designed for aluminising and coating of steel alloy components
Complies with international aerospace standards
Operating temperature : 1200°C
Maximum process temperature 1150°C
Uniform operating zone within the retort : 1500mm (diameter) x 1150mm (high)
Maximum charge weight : 2500kg
Power rating : 250kW
Supplied with 2 walking hearths and an overhead furnace transfer system
Fully programmable gas system with vacuum purge facilities |
|
Bell furnace for heat treatments:
normalizing
annealing
tempering
Plant design according to Customer requierments by team of qualified engineers
- Construction and assembly undertaken by specialised personnel
- Plant commissioning and production assistance on a "Turnkey" basis
- After-Sales Service
- Repair and maintenance intervention on site
- Supply of spare parts
- Technical consultancy services, including operating improvment and calibration |
|
| This Wellman Furnace is used for annealing, brazing, stress relieving, oxide reduction and sintering. Vacuum or controlled atmospheres are available. |
|
We offer a wide line of hump type and straight through mesh belt furnaces and ovens for continuous blackening, brazing, annealing and sintering of light parts or assemblies in controlled atmospheres.
Belt widths range from 12" to 92" for processing temperatures up to 2100°F (1150°C). Silicon carbide, ribbon or tubular heating elements are available along with direct heated or muffle type designs. Water-jacketed coolers are shipped as complete sections. Air jet coolers can be provided for final cooling. |
|
Car Bottom Furnaces can be provided for annealing, normalizing and stress relieving bars, tubes, forgings, large weldments and castings and can be gas fired or electrically heated with either guillotine or bulk head doors. Sand or pneumatically operated mechanical car seals are available.
Tip-Up Furnaces are used where better atmosphere control and temperature uniformity are necessary. Alternate load/unload methods are available.
A Wellman direct gas fired Tip-Up Furnace with a car bottom hearth is shown below for normalizing alloy steel castings. This system combines the Tip-Up advantages of a tight seal and better temperature uniformity with the convenience of loading and unloading on a moveable car with a refractory hearth. |
|
| This Wellman Furnace is used for continuous hardening, tempering and annealing of irregular and randomly spaced loads such as forgings, casting and fasteners. |
|
Carbolite manufacture a large variety of standard laboratory furnaces chamber/box/muffle/tube) & industrial/heat treatment furnaces and our standard laboratory & industrial ovens and incubators. Also highlighted are examples of our custom designed and built solutions for laboratory and industrial applications, including heat treatment furnaces.
To access individual product information, please click on the link |
|
| Heat stations can be controlled from as far as 50 feet from the power supply with optional remote operator panels. In addition, solid-state or electromechanical switches can be provided to allow successive operations in two or more work positions. |
|
Electrically heated Pit Furnace for heat treating gun tubes for M1A1 Tanks.
Performance tests to verify heating rates and uniformity were performed at Wellman's factory prior shipment |
|
... see all the products in the category
Furnaces
|
|
|
