|
|
SMD FUSES FF 470
The Bussmann SMD Tron is designed to EIA-PD-100, DWG SOPM-7243.
A high temperature body material is capable of surviving a 60 second exposure to a temperature of 215°C. Because the SMD Tron is totally sealed, it can be subjected to cleaning by a wide variety of aggressive solvents.
PICOFUSES PF 257
The PF 257 fuses are designed to safely interrupt 50A at 125V ac. This excellent performance is achieved at power factors as low as 97%. Competitive components claim similar short circuit interrupting ratings, but at 100% power factor - a condition that rarely exists in real world applications. In addition PF 257 fuses are capable of interrupting a 300A fault at 125V.
MICROFUSES FF 785
At 250V ac, the 0.5 to 3A PC-TRON can safely interrupt 50A; at 125V ac, the 0.5 to 5A versions can interrupt 10.000A.
This high breaking capacity makes the PC-TRON subminiature fuse ideal for line-side protection of power supplies.
CYLINDRICAL FUSES CT 515
5x15mm glass fuses are available with axial leads. The fuse is available with an optional sleeve of flexible fluoropolymer (UL flammability rating VW-1). The tube will self-extinguish within one minute.
|
|
Decription:
DIN rail mount transient voltage surge suppressor system for ac or dc voltage using diode or
MOV technology.
Dimensions:
See Dimensions illustration.
Construction:
Suppressor Module: 20% glass-filled PES (Polyethersulfone) case with 110 copper terminals with electroless tin plating.
DIN Rail Mount Holder: 15% glass-filled PBT (Polybutylene terephthalate) case with electroless tin-plated CDA 7025 interface clips lubricated with fluoroether grease, copper box lugs and stainless steel DIN rail springs.
Agency Information:
UL Recognized (UL 1449) for ac products, (UL 497B) for dc products, CSA Approved.
|
|
Full Range current-limiting fuse are designed to address the interruption at extremely low currents in addition to interrupting rated maximum interrupting current. The IEEE Std C37.40 -1993 (3.1.41) defines a full-range fuse as "A fuse capable of interrupting all currents from the rated interrupting current down to the minimum continuous current that causes melting of the fusible element(s), with the fuse applied at the maximum ambient temperature specified by the manufacturer." Therefore, the GE Full Range fuse is one of the best alternatives for equipment protection. These fuses can be used indoors and outdoors without any protecting enclosure.
Features and Benefits:
Better low-current clearing ability
High interrupting capacity
Noiseless operation
UL Listed
Fast current-limiting operation
No vents or special reinforced compartments required
|
|
9F59 "T, W & V" series Under Oil (OSP)
Backup current-limiting fuses are designed to be used in series with another protective device (such as an expulsion fuse) to give protection through the complete range. OSP stands for Oil Submerged Protector. These fuses are sealed against the ingress of oil. Each fuse is given a helium mass spectrometer leak test to prove the integrity of the seal.
Features and Benefits:
Complete oil-submergibility
Prevents violent transformer failure from high-fault currents
Proven field performance
100% factory-tested for hermetic seal
Designed and tested for expected transformer duty cycles
Product Scope:
From 8.3 to 23kV
From 40 to 300A
|
|
CHIP FUSE TF16AT - Chip Current Fuses (Anti Pulse)
- Small and light chip current fuses for the secondary circuit.
- Excellent in anti-pulse characteristics.
- Original construction and manufacturing method stabilize fusing characteristics.
- Able to reduce an occupied area.
-Low power consumption and less voltage dropping due to exceedingly low internal resistance.
- Suitable for overcurrent protection of circuit block in small electronic devices.
- Suitable for both flow and reflow solderings.
- Products meet EU-RoHS requirements
|
|
Ferraz Shawmut offers the most extensive line of fuses worldwide. This line is matched by our line of fusegear. Amp-Trap® UL-CSA fuses line is supported by UltraSafeTM holders line and a complete range of power distribution blocks. For IEC low voltage fuses Modulostar® is a complete and innovative line of holders and disconnectors for ferrule-type fuses, Lindner encompasses numerous solutions of bases, holders, switch-disconnectors for DIN standard fuses, holders also for BS88 standard Blue Dot fuses.
Protistor® fuses for power electronics can be mounted in Modulostar® holders and disconnectors when they are of ferrule-type and in IP20 bases when they are of square-body type.
|
|
• Ratings to 16A, 250V ac
• For: 5 x 20mm & 6.3mm fuses
• Finger and tool release versions
• PC2 protection category
• Proud and low profile bezels
• Screw and snap to panel fixing
• Wide choice of terminals
• RoHS compliant
|
|
Bulgin’s extensive range of fuseholders are designed to give the degree of protection demanded in today’s sophisticated electronic equipment. Carrying world-wide safety approvals from UL, VDE, CSA, SEMKO and IMQ, all types are manufactured from high grade flame retardant nylon and polyester materials.
Designed primarily for 5 x 20mm and 6.3 x 32mm size fuses with protection against shock to categories PC1, PC2 and PC3. There's a choice of styles for in-line, PCB mounting and panel mounting (screw or snap fit) with terminal options for solder, 2.8mm, 4.8mm or 6.3mm tabs or PC spills.
Dust and waterproof designs provide a front of panel seal to IP68 in both 5 x 20mm and 6.3 x 32mm size fuses.
Fuse carrier styles include captive drawer, screw cap - with screw driver release, bayonet cap - with screw driver release and screw cap - with finger release.
|
|
Fuse-holder terminal blocks, polyamide insulating body, UL94V-0 flame behaviour..
To be mounted onto TH35 - 7.5; TH35 ? 15; G32 type rail, according to IEC 60715.
Version with mounted diode available.
|
|
Category PC1:
No integral protection against electric shock. If required, Designers / Manufacturers must provide additional protection against electric shock on equipment.
Category PC2:
With integral protection against electric shock. Fuseholders shall have live parts inaccessible to IEC 529 Standard Test Finger, when fully assembled, without fuse carrier or fuse in place and when fuse carrier, with fuse is being inserted or withdrawn.
Category PC3:
With integral protection against electric shock. Fuseholders shall have live parts inaccessable to IEC 529 1 mm dia. rigid test wire when fully assembled, without fuse carrier or fuse in place and when fuse carrier, with fuse is being inserted or withdrawn.
|
|
In-line
fuse holders
• HFA Series - In-line waterproof fuse holders for 1/4" x 11/4" fuses.
• HHT Series - In-line fuse holders for 5 x 15mm or 5 x 20mm fuses.
• HM Series - In-line fuse holders for SFE and 1/4" dia. x various length fuses.
• HR Series - In-line fuse holders for SFE and 1/4" dia. x various length fuses.
fuse holders for 1/4in x 7/8in to 11/4in fuses
• HFB - Waterproof in-line fuse holder for 1/4" x 11/4" fuses.
fuse holders for 1/4in x 7/8in to 11/4in fuses
• HFB-10 - Waterproof in-line fuse holder for 1/4" x 11/4" fuses.
fuse holders for 1/4in x 7/8in to 11/4in fuses
• HHB (Holder-with lead wires) - Universal in-line fuse holder for 1/4" x 7/8", 1" and 11/4" fuses.
fuse holders for 1/4in x 7/8in to 11/4in fuses
• HHB (Holder-without leads*) - Universal in-line fuse holder for 1/4" x 7/8", 1" and 11/4" fuses.
fuse holders for 1/4in x 7/8in to 11/4in fuses
• HRK-R - Universal in-line fuse holder for 1/4" x 7/8" to 11/4" fuses.
|
|
- No minimum order quantities
- Order fuses by the box, typically 100 fuses
- Same day shipment on in-stock products
|
|
| ... products without technical information |
| |
|
|
