|
|
Fuse-holder terminal blocks, polyamide insulating body, UL94V-0 flame behaviour..
To be mounted onto TH35 - 7.5; TH35 ? 15; G32 type rail, according to IEC 60715.
Version with mounted diode available.
|
|
Ferraz Shawmut offers the most extensive line of fuses worldwide. This line is matched by our line of fusegear. Amp-Trap® UL-CSA fuses line is supported by UltraSafeTM holders line and a complete range of power distribution blocks. For IEC low voltage fuses Modulostar® is a complete and innovative line of holders and disconnectors for ferrule-type fuses, Lindner encompasses numerous solutions of bases, holders, switch-disconnectors for DIN standard fuses, holders also for BS88 standard Blue Dot fuses.
Protistor® fuses for power electronics can be mounted in Modulostar® holders and disconnectors when they are of ferrule-type and in IP20 bases when they are of square-body type.
|
|
• Ratings to 16A, 250V ac
• For: 5 x 20mm & 6.3mm fuses
• Finger and tool release versions
• PC2 protection category
• Proud and low profile bezels
• Screw and snap to panel fixing
• Wide choice of terminals
• RoHS compliant
|
|
Bulgin’s extensive range of fuseholders are designed to give the degree of protection demanded in today’s sophisticated electronic equipment. Carrying world-wide safety approvals from UL, VDE, CSA, SEMKO and IMQ, all types are manufactured from high grade flame retardant nylon and polyester materials.
Designed primarily for 5 x 20mm and 6.3 x 32mm size fuses with protection against shock to categories PC1, PC2 and PC3. There's a choice of styles for in-line, PCB mounting and panel mounting (screw or snap fit) with terminal options for solder, 2.8mm, 4.8mm or 6.3mm tabs or PC spills.
Dust and waterproof designs provide a front of panel seal to IP68 in both 5 x 20mm and 6.3 x 32mm size fuses.
Fuse carrier styles include captive drawer, screw cap - with screw driver release, bayonet cap - with screw driver release and screw cap - with finger release.
|
|
_ Fuse holders
_ Type: for PCB or Panel Mounting
_ Fuse: 5x20mm , 6,3x32mm and 10,3x38mm
_ Rating: up to 16A-250Vac or 30A-600Vac
_ closing/cap: push-on fuse, screw cap or bayonet cap
_ fixing: soldering, screw, snap in or with hexagonal nut
|
|
Category PC1:
No integral protection against electric shock. If required, Designers / Manufacturers must provide additional protection against electric shock on equipment.
Category PC2:
With integral protection against electric shock. Fuseholders shall have live parts inaccessible to IEC 529 Standard Test Finger, when fully assembled, without fuse carrier or fuse in place and when fuse carrier, with fuse is being inserted or withdrawn.
Category PC3:
With integral protection against electric shock. Fuseholders shall have live parts inaccessable to IEC 529 1 mm dia. rigid test wire when fully assembled, without fuse carrier or fuse in place and when fuse carrier, with fuse is being inserted or withdrawn.
|
|
PORTAFUSIBILI FROM C.S AND PANEL
Type: for assembly from C.S or panel
Fuses: 5x20mm, 6,3x32mm and 10,3x38mm
Capacity: until to 16A-250Vac or 30A-600Vac
Graft/closing stopper: to pressure of the fuse, to screw or bayonet
Implantation: to knit, to screw, release or with hexagonal dice
|
|
Switch & Fusegears
SAFECLIP Fuse Holders provides economies in cost, size and installation time.
|
|
- No minimum order quantities
- Order fuses by the box, typically 100 fuses
- Same day shipment on in-stock products
|
|
| ... products without technical information |
| |
The DIALOG PLUS RACK series comprises the 700-1000-1500-2200-3000VA models and uses doubleconversion technology (VFI).
The load is powered continuously by the inverter with an EMI filtered, stabilised and regulated sinewave supply.
The input and output EMI filters considerably increasethe immunity of the load to mains disturbances andsurges, even on bypass.
The UPS can power the load for long periods (usingbattery extension packs) or provide sufficient runtimeto allow shut-down of the protected computer systemsusing the PowerShield³ software, supplied as standard,for Windows 95, 98, 2000, Me, XP, 2003, Mac OSx, 9.x, Linux, NT 4.0, Novell operating systems.
For outstanding power protection and communicationDIALOG PLUS RACK is the best solution for sensitiveand "mission-critical" applications.
|
|
Available in 6 & 10 kVA single-phase output, suitable for 19-inch racks (3U), the Linear Plus RM provides all the advantages of modern double conversion technology.
The Linear Plus RM offers many of the standard performance features of the Linear Plus but in a 3U version, making it ideal for installation in 19-inch rack space.
It is available in both single-phase input and single-phase output configuration and provides the security of a truly redundant parallel system whilst offering the highest degree of reliability for mission critical loads and applications.
|
|
|
|
|
|
Digital Energy™ Match
CE / UL LISTED
The Digital Energy™ Match 19" UPS provides cost-effective and near-perfect power protection for a wide range of 19" rack-mount applications. The units are equipped with RS232 and SNMP interfacing possibilities, allowing them to use the free GEDE software for all well-known operating systems. They are specially designed for typical rack-mount demands, like long backup times, high ambient temperatures, and high over-voltage protection. The attractive design allows front access for battery replacement.
As the batteries are front accessible, they can be replaced in an instant without removing the unit from the rack.
The Match 19" UPS is a microprocessor-controlled, line-interactive UPS. The high efficiency of this UPS leads to significant power savings over the lifetime of the product.
When sourcing a 19" rack-mount UPS from GE, you also get access to valuable services such as solution design, integration within networking environments, customization, maintenance, and training.
|
|
Liebert PSI - 60/50Hz: High-Level UPS performance and reliability for servers and network power protection in 1,000-3,000VA.
Liebert GXT 500VA to 10 kVA - 60/50Hz: True on-line UPS for networks, clustered equipment, and other critical applications. Protects against all power threats. Generator compatible. Internal SNMP capable.
|
|
|
|
|
|
Conceptpower DPA
Newave’s newest modular UPS design Conceptpower DPATM (Decentralized Parallel Architecture) with unique SAFE-SWAP-MODULES (SSM) addresses all the availability concerns related to power protection of mission critical applications. The move to high power density blade servers has caused a shift in the performance of advanced power protection systems. High power density, high efficiency and no power derating with leading loads have become the key features of modern UPS Systems.
Individual UPS modules with three-phase output powers from 10 to 50kVA (8 to 40kW) are plugged into an easily installed cabinet which contains all of the system's input and output distribution components. UPS modules are Safe-Swappable and can be quickly and safely added to the system without risk to the critical load for either N+n parallel redundancy or an increase in system capacity. Safe-swappable modules also facilitate rapid repair times, ensuring system reliability and availability are optimised in all circumstances.
Highlights at a glance
- High power density (200kW per rack); For floor space saving;
- DPA with Safe-Swap Modules (SSM); For premium power protection availability;
- Low Total Cost of Ownership (TCO); Cost saving during entire life-cycle;
- Flexibility / Scalability; Ease of power upgrade, pay as you grow;
- Enhanced Serviceability; Rapid fault recovery;
- Link to Newavewatch; Instantaneous fault recognition.
|
|
|
|
|
|
Digital Energy™ IT Series UL Listed UPS 600VA - 2kVA
Pure Sinewave Output, Line Interactive Tower and Rack Mounted UPS
The GE Digital Energy™ IT Series Rackmount and Tower UPS provide cost-effective, high quality power protection for a wide range of 19" Rackmount and Tower mount applications. The IT Series is a line interactive UPS that has pure sine wave output, which prevents downtime and equipment damage due to power outages, voltage fluctuations and transient surges. All GE Digital Energy™ IT Series UPS's are microprocessor-controlled and equipped with AVR (Automatic Voltage Regulation), making them ideal for server, data storage, networking, telecommunications, and point-of-sale applications.
The units are equipped with RS-232, USB and additional communications slots for add-on accessory communications cards. GE offers a wide variety of SNMP and communication cards to enhance the communication capabilities of the IT Series.
All IT Series UPS's utilize the GE IT Series MONITORing management and monitoring software. The IT Series MONITORing management and monitoring software has the capability to interface with all of today's software operating system platforms. The front panel, multifunction audible alarms and set of six (6) LED's allow for quick visual notification of UPS and battery status.
All IT Series UPS's have hot swappable, user-replaceable batteries. The attractive design of the IT Series allows for front access, facilitating battery replacement. All GE IT Series UPS units come in an attractive, black color scheme and carry a (2) two-year product warranty.
|
|
|
|
|
|
The highest precision for sensitive loads.
Designed to provide the highest precision thanks to its advanced double conversion technology, Active is the ideal solution for those sensitive loads which require a high level of regulation and for those electrical environments where the AC quality is poor. Also available in rack version, Active is a perfect investment to help deliver reliability and robustness to your loads.
Active, available in tower and rack versions from 700 - 3000 VA, features advanced double conversion technology for a maximum protection of your sensitive loads.
External battery packs for extended autonomies are an option, facilitating a modular approach to power management, allowing us to tailor your UPS solution as your loads requirements change.
Its tight output voltage regulation (+/-3%) and wide input voltage (160-276 V) make Active the right choice for sensitive loads and poor AC mains environments.
Active includes a comprehensive and user-friendly front panel which provides the user with information about the UPS status (faults, mode of operation) and parameters (load level, battery level) at a glance.
MopUPS Professional software is bundled with the unit, in addition to other connectivity elements (SNMP slot, RS232 and USB ports, volt-free contacts and RPO optionally, etc). Moreover, together with ManageUPS CIO software, Active is a perfect solution for distributed systems and remote locations.
|
|
GE's Digital EnergyTM GT Series UL UPS series provides high quality power protection in a cost effective package. The GT Series UL is a compact, true VFI (Voltage and Frequency Independent) on-line double conversion high performance device.
The UPS is designed to support and protect mission-critical applications and provide the user with high reliability power regardless of the mains power quality condition. All GT Series UL UPS are microprocessor controlled and equipped with RS232 communication and optional SNMP interfacing capabilities for all major operating systems. Extended run times are available with the optional battery pack.
|
|
The Powerware 5115 Rackmount UPS is a high-density power quality and backup power protection solution ideal for servers, storage systems, network equipment and other critical devices. Delivering basic surge protection and backup power, the Powerware 5115 Rackmount UPS additionally offers the best UPS power protection against five of the nine common power quality problems.
The slim design and wide range of UPS system installation possibilities make the Powerware 5115 Rackmount UPS the most versatile UPS power quality solution available.
|
|
Only 1U thickness (4.4cm)
The ELITE2005RM is an inverter which does not exceed 1U thickness. Very small it is very easily integrated in a bay 19 '' of small size.
Toric Tranformator
The ELITE2005RM is equipped with a toric transformer the purpose of which is to limit the electromagnetic radiation and to increase the output of the inverter.
Voltage regulator
In order to avoid inopportune commutations in battery mode, the ELITE2005RM is equipped with a very powerful voltage regulator. This regulator makes it possible the responsibility of be fed with a tension always very near to the face value.
Protection network RJ45
2 catches RJ45 are at your disposal to protect your chart network or your Modem chart against the storms and the electric shocks.
Intelligent communication
For an optimum safety, L '' ELITE2005RM is sold with a software of supervision and automatic fence of files to be installed on a PC or a waiter.
|
|
Inverter rackable, modular of 0,4KVA with 6KVA.
- Evolutionary in autonomy
- Redundant N+1
- Has fault tolerance (Hot swap)
- Available in ONE LINE and IN LINE
|
|
| ... products without technical information |
| |
... see all the products in the category
UPSs
|
|
|
see the results for the following category : 
