|
|
We can supply MOBILE BOAT HAULERS and MOBILE BOAT TRAILERS for handling and transporting, dry-docking and launching boats with a weight up to 1500 ton.
Our Company can design, manufacture and supply the most appropriate travelift, and also guarantee direct after-sale and spare parts service, with highly skilled staff, even for equipment of other manufacturers.
Our staff consists of persons who can boast a 30-year experience in this field.
We are presently fabricating 4 units of Mobile Boat Hauler MBH 820 , each of them with a capacity of 820 ton., to date the biggest ever, worldwide !
|
|
We can supply MOBILE BOAT HAULERS and MOBILE BOAT TRAILERS for handling and transporting, dry-docking and launching boats with a weight up to 1500 ton.
Our Company can design, manufacture and supply the most appropriate travelift, and also guarantee direct after-sale and spare parts service, with highly skilled staff, even for equipment of other manufacturers.
Our staff consists of persons who can boast a 30-year experience in this field.
We are presently fabricating 4 units of Mobile Boat Hauler MBH 820 , each of them with a capacity of 820 ton., to date the biggest ever, worldwide !
|
|
Picture : Mobile Boat Hauler MBH 820 - Max carrying capacity 820t
We can supply MOBILE BOAT HAULERS and MOBILE BOAT TRAILERS for handling and transporting, dry-docking and launching boats with a weight up to 1500 ton.
Our Company can design, manufacture and supply the most appropriate travelift, and also guarantee direct after-sale and spare parts service, with highly skilled staff, even for equipment of other manufacturers.
Our staff consists of persons who can boast a 30-year experience in this field.
We are presently fabricating 4 units of Mobile Boat Hauler MBH 820 , each of them with a capacity of 820 ton., to date the biggest ever, worldwide !
|
|
Picture : Mobile Boat Hauler MBH 260 - Max carrying capacity 260t
We can supply MOBILE BOAT HAULERS and MOBILE BOAT TRAILERS for handling and transporting, dry-docking and launching boats with a weight up to 1500 ton.
Our Company can design, manufacture and supply the most appropriate travelift, and also guarantee direct after-sale and spare parts service, with highly skilled staff, even for equipment of other manufacturers.
Our staff consists of persons who can boast a 30-year experience in this field.
We are presently fabricating 4 units of Mobile Boat Hauler MBH 820 , each of them with a capacity of 820 ton., to date the biggest ever, worldwide !
|
|
We can supply MOBILE BOAT HAULERS and MOBILE BOAT TRAILERS for handling and transporting, dry-docking and launching boats with a weight up to 1500 ton.
Our Company can design, manufacture and supply the most appropriate travelift, and also guarantee direct after-sale and spare parts service, with highly skilled staff, even for equipment of other manufacturers.
Our staff consists of persons who can boast a 30-year experience in this field.
We are presently fabricating 4 units of Mobile Boat Hauler MBH 820 , each of them with a capacity of 820 ton., to date the biggest ever, worldwide !
|
|
Description of the equipment
Marine Hoist is designed for handling sailboats, motor boats, pleasure boats and yachts with tall masts.
The design considers, although boats are bulky, that they are fragile at the same time especially with the mast up. To strike a mast is not only expensive but time consuming and somewhat precarious, and Paolo De Nicola for all these reasons offers a “C” shape hoist. This type of structure is open at one end permitting the yard to haul, dry dock and launch boats with their masts intact.
With the boat dry docked maintenance, fitting out and repairs can easily be carried out with a subsequent decrease in costs.
The “ELIDRA” has a main structure, translation and steering system, hoisting apparatus, engine and operator’s cab.
|
|
|
|
|
|
ASCOM S.p.A., to world more leader for than 30 years in specialized lifting equipment for yards, road, rail, transfer and manufacturing sectors!
ASCOM custom designs and builds lift equipment with load capacities from 20 up to 1000 metric ton.
Main products are straddle carriers, gantry cranes on rails or tires, overhead cranes, boat hoists, self propelled trailers for these industries and more:
- civil works infrastructures: handling long concrete beams, concrete sections, bridge girders (steel concrete)
- fabrication yards: handling beams, pipes, hollow Core, walls, pillars, granite and marble blocks
- steel mills: handling plates, slabs or coils with slings, chains, magnetic spreader and other special attachments
- wind turbines: handling he upsets some blades, base, pedestal loading and transfer
- specialty equipment and materials: generator sets, piece of furniture fuel plants and refinery equipment
ASCOM provides engineering, design, assembly technicians, testing, training and maintenance around the world through to vast network sales assistance and after sales service centers.
To high value collaboration for an ideal partnership in material handling!
|
|
|
Portable Hoists designed for loading and unloading trailers. Capacity range to 15T. Comes with detachable steering tongue so it can be towed in and around your facility with ease.
|
|
|
|
|
|
|
Kleeco hoists have a long history dating back to 1967. Kleeco designed and built the original open-end marine hoist. That style quickly became the industry standard and remains so to this day. Today, under the ownership of Lake City Industries, Kleeco is once again on the cutting edge of mobile hoist development for marine and industrial applications. We are committed to being the best in our field. This means not only building a quality, reliable product, but also doing it with the finest and most capable components. It means attention to detail and quality craftsmanship from our staff, who will see the project through from beginning to end. It means listening to our customer and working hand in hand to design and equip their travel hoist to best fit their needs. It means supporting our machines and customers with parts support and service for years to come. Buying a mobile boat hoist is a major investment for your business. Our goal is to make sure that for your investment you are getting the best machine available today and that it will continue to be a reliable part of your operation for years to come. Compare us to the competition. We believe the quality and capability of our marine hoists and the post sale support can match or exceed our competitors. Call us today and give us the opportunity to show you that our Harbor Hoist is the right investment for you.
|
|
Straddle Carriers for hosting and transporting boats (Travellift) w ith load carrying capacities from 10 up to 800 tons and varying sizes designed to end customer requirements.
Project design for these machines represents an on-site test for companies in this specific manufacturing sector offering innovative technical and structural features. Eden Technology’s experts invented the Trollift, a straddle carrier with varying wheel gauge. This innovative technical feature allows shipyard and marina operators to optimize the dry-docking space available also minimising the space required for machine manoeuvring. These straddle carriers are controlled from a remote control unit, are fitted out with different types of steering and travel systems, and mount compact maintenance free components.
These machines can be both hydraulic or electric at client's choice.
|
|
The Straddle Carrier (also known as RGT-RUBBER TYRED GANTRY) is designed for lifting and transporting large and heavy loads.
A straddle structure on two legs supports the lifting appliances (trolleys and blocks).
The hoisting winches are positioned at the base of the legs (easily accessible), the wire rope spools on a single layer, ensuring longer life to the rope itself.
On the lower longitudinal elements the following are positioned:
• Control cab
• Thermal-engine group
• Wheel holder groups
|
|
PRONAL lifting cushions can be used to lift loads of over 70 tonnes and are particularly useful in areas such as civil protection, security and defence.
They are also used in maintenance operations on construction sites and in various industries for moving, blocking and handling operations... Made from elastomer-coated fabrics, the cushions are vacuum vulcanised at a temperature of 140°C, thus ensuring that they are extremely tough.
Advantages :
- easy to install, thin when empty,
- uniform lifting power,
- high degree of control during lifting, progressive lifting process,
- high lifting force.They are also used for maintenance purposes on site and in industries for some operations as moving, stalling, handling...
|
|
|
If an ECO-Jack toe jack can not be operated, the load can be lifted with an ECO-Jack AIR lifting bag ranging from 1.000kgs (2,200lbs) to 42.000kgs (92,800lbs). Fitting into the tightest areas with a collapsed height of 30mm (1.1-1.2inches), all models are light weighted and equipped with serrated lifting surfaces, markes centers, reinforced edges and safety instructions.
|
|
To be able to achieve a maximum lifting movement with only a minimum insertion space available, lifting bags are the appropriate tools to use. With 12 models, Holmatro has a lifting bag for every job. Thanks to their unique low profile edges the lifting bags can easily be inserted under all circumstances.
The deflated height of our lifting bags is 22 or 25 mm. Using compressed air (maximum 8 bar), the largest model, the HLB 67, reaches a maximum inflation height of 520 mm. Another feature of the lifting bags is their ability to adjust to the lifting surface. The applied pressure is divided over a large surface compared to the use of hydraulic jacks.
|
|
The distinguishing feature of Vetter Mini Lifting Bags 8.0 bar/116 psi is the noiseless, jolt-free, and smooth lifting of the heaviest loads. They lift, push, press, prise and split, even on sloping surfaces. The surface profile improves grip on slippery ground such as grass, sand etetc.
They are produced in two versions. Both versions have a multi-layer construction which covers each side of the bag. This is either steelcord or aramide reinforcement.
|
|
INFLATABLE JACK
1-74 Ton
Highly flexible and lightweight jacks only require an air supply of 8 bar maximum. Any non-explosive gas or water can also be used for inflation.
Uninflated jacks are only 25,4 mm thick, making seemingly impossible lifting tasks routine.
Space age reinforced, multi-layer aramid construction, widely overlapping on all sides. Tested at 8 bar.
In rugged testing, jacks withstood tens of thousands of inflate/deflate cycles at 12 bar.
Large surface area and material flexibility allow jacks to lift loads on soft or ompressible surfaces without support cribbing being necessary.
|
|
The pneumatic aircraft lifting bags are designed so that their surface softly position to the contours of the aircraft and the pressure is optimally distributed over it.
With a maximum insertion height of 25 cm (10 inch) and a bag area of up to 14 m² the ALB are ideally suited to lift aircraft eveny up to 4 m/13 ft. (without any support from underneath).
The strong lifting power of up to 60 tons per bag and the enormous side stability, due to the space weave fabric having thousands of individual threads per square metre, ensure safe recovery.
|
|
for quick application in close space!
- Multi-layer design with Armid material.
- Fill time with 8 bar within seconds.
- Extensive accessories, like suitable case etc.
|
|
The distinguishing feature of Vetter Mini Lifting Bags 8.0 bar/116 psi is the noiseless, jolt-free, and smooth lifting of the heaviest loads. They lift, push, press, prise and split, even on sloping surfaces. The surface profile improves grip on slippery ground such as grass, sand etetc.
They are produced in two versions. Both versions have a multi-layer construction which covers each side of the bag. This is either steelcord or aramide reinforcement.
|
|
Lifting devices
Lifting - Freeing - Cleaving
Mustlift is able to lift safely heavy loads on the ground or in water. Their compact size, allowing to place them quite everywhere, is obtained by a simple vulcanization of a high resistant elastomer coated fabric. They can be used on irregular surfaces thanks to their positive grip surface.
Mustlift lifting bags can be inflated with air or water at maximum 8 bar.
High-pressure flat lifting bag, made from coated fabric (polyester or aramid) vulcalized in one operation. Lifts up to 76 T in the standard range. Anti-slide coating
|
|
Extruded Flat Lift Table
EF1-based, guided cylinder with four shafts for maximum rigidity. It is designed for lifting applications where other non-rotating cylinders cannot handle an overhung load and space is at a premium.
Four-shaft support withstands offset loads and moments.
Simple, efficient design provides economical alternative to other costly guided actuators.
Joins the EF family of products, so shares all the same benefits--long service life, low friction operation, fast delivery.
Convenient wide tooling mounting surface.
Intended for vertical lifting applications (should not be mounted horizontally or with tooling plates facing down).
|
|
|
|
|
|
LINAK has launched a wide range of lifting columns to be used in various sectors with the purpose of improving ergonomics at different kinds of workplaces.
LINAK lifting columns allow applications such as
desks
tables
beds
kitchen units and
heavy-duty industrial workbenches
to be raised, lowered or tilted by means of a button. With the LINAK lifting columns it is possible to install sophisticated motorised systems that provide optimum ergonomics at a modest price.
Compared to the lifting columns mentioned, LINAK does manufacture columns used for vertical lift of hospital and care beds where design, easy cleaning and ergonomics are important factors.
LINAKs several different types of lifting columns are for instance LC2, LP2, LP3, DL1, DL2, DL4, DL5 and DL6.
LP2 and LP3 are used in the hospital and care sector for height adjustment of e.g. stretchers, incubators and surgical chairs. The LC2 is a further development of the LP2 and LP3. Besides the applications mentioned above LC2 is also a good choise in more industrial applications.
DL1, DL2, DL4, DL5 and DL6 are part of LINAK's DESKLINE® system for ergonomic sit/stand office desks. DL1, which set the standard of the market, is compact and avaiblable in more colours. The DL2 system offers a progressive speed control, meaning you have the same speed level both upwards and downwards. The DL5 and DL6 are further developing the DL1. DL4 is also called the DESKPOWER™ system.
At the touch of a button the DESKPOWER system can adjust desks within a range of adjustment from 60-125 cm at a high speed level irrespective of load. At the same time the noise level is extremely low.
|
|
Lifting columns are the ideal drive elements when a motor setting is required in addition to the stable guidance. The whole technology is integrated and not visible from the outside. These lifting columns do not need any additional coverings. Usually, no special electrical knowledge will be required for the commissioning. Various versions are available as standard for the application in the field of medical technology.
Several lifting columns can be combined and synchronised and offer further impressive application possibilities. The MultiControl-units can be linked by a BUS-system and enable the synchronization of maximal 32 lifting columns.
|
|
For guided lifting and lowering of the workpiece.
The lifting movement is effected power-supported by a hydraulic or electrical actuator against the weight of the workpiece.
The lowering movement is a defined lowering by use of the weight.
For maximum workpiece weights of 100 to 1,000 kg.
Maximum strokes from 200 to 940 mm.
|
|
|
|
|
|
LINAK has launched a wide range of lifting columns to be used in various sectors with the purpose of improving ergonomics at different kinds of workplaces.
LINAK lifting columns allow applications such as
desks
tables
beds
kitchen units and
heavy-duty industrial workbenches
to be raised, lowered or tilted by means of a button. With the LINAK lifting columns it is possible to install sophisticated motorised systems that provide optimum ergonomics at a modest price.
Compared to the lifting columns mentioned, LINAK does manufacture columns used for vertical lift of hospital and care beds where design, easy cleaning and ergonomics are important factors.
LINAKs several different types of lifting columns are for instance LC2, LP2, LP3, DL1, DL2, DL4, DL5 and DL6.
LP2 and LP3 are used in the hospital and care sector for height adjustment of e.g. stretchers, incubators and surgical chairs. The LC2 is a further development of the LP2 and LP3. Besides the applications mentioned above LC2 is also a good choise in more industrial applications.
DL1, DL2, DL4, DL5 and DL6 are part of LINAK's DESKLINE® system for ergonomic sit/stand office desks. DL1, which set the standard of the market, is compact and avaiblable in more colours. The DL2 system offers a progressive speed control, meaning you have the same speed level both upwards and downwards. The DL5 and DL6 are further developing the DL1. DL4 is also called the DESKPOWER™ system.
At the touch of a button the DESKPOWER system can adjust desks within a range of adjustment from 60-125 cm at a high speed level irrespective of load. At the same time the noise level is extremely low.
|
|
Electric Lifting Columns from LINAK
In the lifting column, the guide and electric linear actuator are integrated. With the electric lifting columns from LINAK it is possible to install the sophisticated motorised system that provides optimum ergonomics in a range of applications. Electric lifting columns from LINAK are designed to raise, lower or tilt:
beds (hospital beds, care beds and home beds)
desks
incubators
industrial workbenches
kitchen units
tables
stretchers
surgical chairs
and more
Lifting columns for hospitals, care, industry, office and home
Some series of electric lifting columns are in particular designed to meet the needs of the hospital and care sectors, the office furniture market, the industry and the comfort furniture market.
|
|
Light, elegant aluminium profile with a very quit run (<40db)
Are used especially in the medical sector (Ophthalmology, Ultrasound)
Columns of these types can also run in parallel (large tables, ergonomic work)
Big Advantage: Plug and Play
Most of our columns, we call Plug and Play. After receiving the column, attach it to the network power and with the delivered hand switch, you can use the column immediately.
Application: Adjustable chairs and tables, adjustable tables for computer, lecterns and so on
Force: up to 2200 N
Electric current: 230V / 50 Hz
120V / 60 Hz
100V / 60 Hz
Multifunction (all Electric current are possible in one column)
Custom Option: on request
EN 60601-1 certificated
All Materials are recyclable
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
