|
|
Peak 99.9995% H2 Generator
Trusted technology that has been proven successful in our CFH Range of Hydrogen Generators has now been incorporated into the design for our new Peak Hydrogen Generators.
Safety Features such as a Self- Check for internal leaks on Power- Up, Dual Safety in the form of pressure control and a mechanical pressure switch as well as forced air ventilation eradicate the risk of Hydrogen escaping into atmosphere.
The Hydrogen Generators also benefit of an automatic water loading pump, which loads water automatically from an external tank, allowing for easier and less frequent re-fills of de- ionised water.
The new smaller design of this generator range safes valuable space in your laboratory.
|
|
|
Hydrogen Generator LM Series belong to high-tech products in which the solid polymer electrolyte (SPE) that is the most advanced technology for producing hydrogen in the world is adopted. The generator generates pure hydrogen directly with electrolytic separation of pure water (deionized water) by a SPE cell. There is none of alkali solution to use. It can be used as hydrogen container replacement in many places and is safe, reliable, practical, easy to operate and carry.
|
|
The benefits of using hydrogen as a GC carrier gas are proven; faster analysis, improved resolution and longer column life. And, with the price of non-renewable helium increasing at a rapid rate, hydrogen is now a more cost-effective and environmentally friendly choice of carrier.
The Parker domnick hunter H-MD hydrogen gas generator features intelligent control and multiple fail-safe alarms to facilitate safe and fast analysis. In addition, purities higher than that achieved from bottled gas supplies ensure greater productivity, reduced bottom-line costs and higher quality GC data and analyses.
Parker domnick hunter also offers LCMS nitrogen gas generators which are designed to specifically match the gas requirements of individual LCMS instruments to facilitate optimum performance.
A range of zero, clean dry and CO2 free air systems are available and are approved for use with all major analytical instrumentation manufacturers, so compatibility, quality and reliability is assured.
|
|
Peak Scientific UHP Nitrogen Generators utilize a “Pressure Swing Adsorption” (PSA) method to extract pure Nitrogen from air. Unwanted gases are selectively adsorbed from compressed air into a porous Carbon Molecular Sieve (CMS) material.
This generator range has been developed specifically to produce a continuous supply of UHP Nitrogen for your Gas Chromatograph Applications. The NG Range only requires an electrical supply for operation and once installed, only minimal maintenance is required at regular intervals.
Our Range of High Purity Nitrogen Generators is available with or without internal air compressors and in various flow rates ranging from 250cc/min to 4L/min.
|
|
|
|
|
|
The nitrogen generator was designed spécifi quement to meet the requirements of flows, gas purity and pressure for instruments LCMS. it can be used for evaporations of samples. The nitrogen is produced by using membrane technology, to separate effi cacement the nitrogen of the other gas molecules present in the air ambiant.la falls of pressure is only of 1 bar, making easier the connection of the generator to your own network of compressed air.
Advantages
Improvement of the performances of the instrument the guaranteed constant purity of nitrogen improves the stability of the system and ensures of the reproducible results.
Improvement of the effectiveness of the laboratory volumes of relatively high gas required by instruments LCMS make a food by bottles inappropriate for these applications.
More important economy Return on investment < 1 year. No the hiring of bottles, not of infl ation of price.
Reinforced safety the produced nitrogen with low pressure and room temperature eliminates the dangers associated with the bottles with high pressure and handling from liquid nitrogen. Simple installation the generator can be installed easily. Do not require electricity and can be installed directly on a wall to optimize the place in the laboratory.
|
|
|
|
|
|
ISO 20' CONTAINERISED CYLINDER FILLING PLANT - TURN KEY
Iso 20' workshop container
The whole of the components is entirely mounted within a modified container serving as technical workshop divided in two areas with three access doors and a control board with digital display. The container is equipped with a dismountable metallic roof, an air cooling system as well as inside and outside lighting. Among other features, we may point out the special outdoor paint consisting in a primer surface treatment and finishing enamel coat .
The container represents an excellent protection against intrusions of any kind (dust, rain, thefts, and so on), it allows CPO units to be operated every door closed. Designed to be used outdoor, their ventilation system guarantees the efficiency of the whole device whatever the environment temperature and moisture conditions are.
Seemingly similar to any other 20 feet container, the CPO workshop container facilitates considerably the conveyance of the plant (pass for fork-elevator, bolt-on ISO corners). In addition to that, it can easily be loaded on an adapted trailer improving the mobility of the equipment to such a point that it can be operated from a spot to another without being taken off the trailer.
|
|
Claind’s nitrogen generators satisfy all laboratory analysis and industrial process needs with very few exceptions.
The range includes compact generators with built-in oil-free compressors, medium and high pressure generators for industrial applications, and special generators for OEM applications.
Claind’s nitrogen generators are based on PSA (Pressure Swing Adsorption) technology for maximum reliability and gas quality. Claind has also patented the Fast Purity system, the most significant innovation in the world of PSA technology in recent years.
|
|
|
|
|
|
KOFLOC Nitrogen Gas Generator MNT SERIES (2.5NL/min-20NL/min)
KOFLOC Nitrogen Gas Generator MNT SERIES is a small, low-cost nitrogen generator with a small compressor, allowing it to be used anywhere with just a 100 VAC power supply. The adsorbent (molecular sieving carbon selectively adsorb a large amounts of oxygen under high-pressure condition, quickly removing oxygen carbon dioxide and moisture out of air, leaving only the high purity nitrogen gas as the final product. The adsorbent material releases oxygen when depressurized. High-purity nitrogen gas can be produced continuously by PSA (pressure swing absorption), which is a method of alternately pressurizing 2 adsorption vessels.
FEATURES
♦ Fully automatic
♦ Compact
♦ 100 VAC power supply
♦ High-purity and dry (–55˚C or less) nitrogen gas can be obtained
♦ Aluminum pressure vessels
♦ Quiet operation
♦ Quick startup
♦ High purity (99.999%) is also available
APPLICATIONS
* Substitution for nitrogen gas cylinders
* For heat treatment processes
* Semiconductor processes
* CA storage gas for fruits and vegetables
* Non-oxidization seal gas
* Explosion-proof or rust-prevention gas
* Seal gas for shipping
* Blanket gas for synthetic fibers and melted spinning
|
|
|
|
|
|
The Parker domnick hunter MAXIGAS range of nitrogen gas generators has been developed to allow users to produce nitrogen gas on-site, without the need for traditional high pressure cylinder or liquefied gas supplies.
A Parker domnick hunter MAXIGAS nitrogen generator can help save up to 90% on nitrogen gas costs and can easily form the basis of a complete central nitrogen supply for several application including MAP (modified atmosphere packaging) gas flushing, pressure transfer and blanketing (of food stuffs and raw materials).
The MAXIGAS generators produce nitrogen gas from a virtually free resource %u2013 air. Designed to operate from compressed air, the generators deliver a continuous, uninterrupted supply of nitrogen gas at purity from 97%-99.999%.
The MAXIGAS systems offer the safest, most convenient and economic source of nitrogen available. The compact, modular design allows easy upgrading of the system as production capacity expands.
At 10 ppm oxygen content flow rates vary from 1.3 Nm3/hr to 6.5 Nm3/hr. At 1% the corresponding flow rates available are 11.8 Nm3/hr %u2013 59.1 Nm3/hr.
|
|
The LASERGAS nitrogen generator is a truly high range generator thanks to sophisticated technology and exceptional performance.
This unique gas generator is capable of producing nitrogen at very high pressure. It is available in various versions with different outputs, purity and pressure ratings.
The LASERGAS nitrogen generator can be used in any area of industry requiring a medium or high pressure nitrogen supply, or whenever intermittent demand requires large reserves of nitrogen to be kept ready for rapid consumption.
|
|
Peak N2 Generator for LC/MS
The NM30LA Nitrogen Generator is Peak Scientific Instruments' proven solution for customers requiring Nitrogen for their LC/MS Application.
Specifically designed to supply LC/MS/MS analysers, the NM30LA produces nitrogen gas at the required flow rates, purities and pressures for these instruments.
The produced nitrogen gas is filtered down to 0.01micron and passed through an Active Carbon Filter to minimize the risk of contamination.
All of our gas generators for LC/MS are phthalate free.
Quiet in operation the NM30LA utilises separation technology to selectively remove oxygen, moisture and other gases to leave clean, dry, phthalate free
nitrogen.
2 Internal Air Compressors make the NM30LA a stand- alone, self- suffcient Nitrogen Generator, independent from external air sources.
|
|
|
|
|
|
Specifically designed to operate LCMS Instruments manufactured by Applied Biosystems/ MDS Sciex, the AB-3G produces Nitrogen and Dry Air through 3 independent outputs in the required flow rates, purities and pressures to cater for the requirements of all available Applied Biosystems/ MDS Sciex LCMS Models, including the new API5500.
The AB-3G essentially combines two separate gas generator systems in one unit, with the source and exhaust gases (Dry Air) being generated using one system and the curtain gas (Nitrogen) being generated by the other. The AB-3G utilises proven membrane technology that selectively removes oxygen, moisture and other gases to leave clean, dry, phthalate free Nitrogen and Dry Air.
To ensure this new generator model, meets Peak Scientific’s high expectations with regards to reliability and performance, Peak Scientific has tested these new models extensively at our manufacturing plant and with end users around the world to ensure reliability and longevity of the systems.
Applied Biosystems/ MDS Sciex have further approved these products to supply Nitrogen and Dry Air to all of their LCMS Applications.
Peak Gas Generators are unique in that they are simple to install and easy to use. After initial installation and set up, the generator will operate continuously with virtually no operator involvement and optimum performance can be maintained with an annual service visit. Elimination of the purchasing process, storage and movement of cylinders will also significantly reduce the time and costs associated with supplying gas to an LCMS System.
|
|
|
|
|
|
One of Peak Scientific’s best known and loved products is the NM20ZA Nitrogen Generator. This generator model was designed in the year 2000 to cater for the requirements of Applied Biosystems/ MDS Sciex LCMS Applications.
However, time does not stand still and as Applied Biosystems/ MDS Sciex have further developed their applications, more and more gas was required- so much so, that the NM20ZA could no longer cater for the requirements of all API Models, but was limited to the range up to the API4000.
As such it was time for Peak Scientific to let the NM20ZA grow up and redevelop it in such a way that it could provide curtain, source and exhaust gas to the entire range, including the latest API5500.
The result is the brand new ABN2ZA Nitrogen Generator. Like the NM20ZA, which is still going to be available, this new model provides a source of Nitrogen gas as well as 2 independent supplies of clean, dry air.
With the ABN2ZA based on proven technology, it selectively removes oxygen, moisture and other gases to leave clean, dry, phthalate free Nitrogen and Dry Air. Two internal air compressors make this unit independent from in- house air supplies and fitted castors allow the user to easily position the unit in the lab. The unit has further been approved by Applied Biosystems/ MDS Sciex to supply curtain, source and exhaust gas to their LCMS Applications.
|
|
|
|
|
|
CHARACTERISTICS
Compressor of air integrated 99,999%
N2 flow: 3L/min and 5L/min
Interface LCD of piloting and hour meter
Indication of maintenance by a luminous indicator
ADVANTAGES AND ECONOMIES
Conceived specifically to meet the requirements of flows and purities of the analytical instruments
Increase in the analytical performances
Increase in the effectiveness of the laboratory
Reinforced safety
More important economies
Simple installation
Recommended and approved by the manufacturers of instrumentations LCMS
APPLICATION
Produced nitrogen high purity starting from compressed air.
Replace the nitrogen bottles for the following applications:
- LCMS/MS
- DETECTOR ELSD
- EVAPORATION Of SAMPLES
Principle of operation
The nitrogen is produced by using membrane technology, starting from a network of compressed air without oil or pre treaty of a mini pressure. of 110 psi.
The fall of pressure is only of 10 psi (0.5 bar), weakest of the market, making easier the connection of the generator to your own network of compressed air.
The membrane functions on the principle of the selective permeation, or oxygenates it, the steam and CO2 which are fast gases crosses the membrane, while the nitrogen, gas slow, continuous to circulate in the form of gas flow inside the membrane.
|
|
Peak N2 Generator for API LCMS
The NM20Z is a self contained Gas Station designed specifically for the API Analyser Range. It is a plug and play system, fully tried and tested. You will be operational in minutes and running analysis without interruption.
This generator is also available with internal air compressors.
Features & Benefits
Three gas lines from one system
No more cylinders, regulators, re-ordering or safety issues
Quiet operation
Simple to install to any analyzer
No electrical requirements
Wall mountable
24 hour operation
|
|
SKID MOUNTED CYLINDER FILLING PLANT – TURN KEY
The CFO Line presents the same specifications than containerised versions (cf. CPO Line). Note that skid mounted devices must be settled indoor in a place sufficiently ventilated. Apart from that, they only can be operated on a static basis. Due to their higher sensitiveness to their environment, the operator will have to make sure the operation area is adapted and isolated.
|
|
The HMXT Generator design is a refinement of the proven TITAN™ HM and HS generators. New features provide added benefits for the user. A distributed I/O system using DeviceNet Network provides flexibility, additional operational data, and reduced installation time. A modernized human machine interface (HMI) permits easy operator access, data history, and remote operation. An efficient layout helps to reduce scheduled preventive maintenance time by up to 30%. In addition, the gas delivery pressure has been increased to 10 bar.
Ultrapure Gas
Ultrapure (99.9998%), on-demand hydrogen gas delivery at useable 10 bar pressure with no additional purification required
Pressurized, ultrapure oxygen (99.999%), free of hydrocarbons and other atmospheric contaminants, with
use of auxiliary purifier
|
|
|
|
|
|
This equipment is supplies generating a clean hydrogen gas and oxygen gas by high purity without any in impurities by adoption of ion exchange membrane type water electrolysis.
Water electrolysis by using ion exchange membrane, “Electric energy to convert directly into Hydrogen and oxygen.” “Gas Generation to control safely and easily.” “Gas Generation Reactor to be simple.”
Applications
For fuel cell
For various burnings
For hydrogen water manufacture
As a hydrogen source and an oxygen source of other usages
Features
The High Pressure Gas Safety Law in Japan is not applied.
Since gas supply power is 100-300kPa, The High Pressure Gas Safety Law in Japan is not applied to it.
Only pure water is needed as material.
If there are even a power supply and pure water, supply of gas is possible anywhere.
Therefore, a worker is free from conveyance and exchange of a cylinder.
High safety
There is very few of gas staying within equipment, so the equipmewnt operation is excellent in safety.
Clean gas
The solid ion exchanged film is used for this equipment as the electrolyte for water electrolysis.Therefore, pure water electrolysis is possible, without using a strong alkaline electrolyte like conventional equipment.Antipollution measures, such as alkali waste fluid processing, are unnecessary entirely as well as clean gas being obtained by that.
Easy operation
Only by turning switchON, the gas controlled by fixed gas pressure is supplied immediately.
Maintenance-free
Since it is clean gas, there is no clogging of a pipe or a nozzle, and periodical cleaning of a troublesome electrolysis tub is also unnecessary.
|
|
The H2 MAX3 Series is designed to satisfy the needs of industry.
This series of hydrogen generators is a true ambassador for Italian innovation and technology. Claind is the only Italian manufacturer of pressure electrolysis hydrogen generators capable of conforming to the strictest CE international safety standards (ATEX, PED).
Technical specifications
Output: from 0.5 to 30 Nm3/h
Delivery pressure: 15 bar (without auxiliary compressors)
Gas purity: 99.7% without deoxo, 99.999% with deoxo
CE certified (ATEX, PED)
BENEFITS
Safety: maximum operating safety.
Purity: Oxygen levels below 0.2% O2.
APPLICATIONS
Refuelling stations for hydrogen fuelled vehicles
Energy storage systems and research into renewable energy sources like peak shaving, UPS, and completely off-grid systems.
Industrial processes like annealing, noble metal welding, cooling of nuclear and other electrical power stations, food processing and pharmaceuticals.
|
|
|
Hydrogen offers tremendous advantages as a clean fuel source. Hydrogen, like electricity, is a clean energy carrier and when derived from renewable energy sources, hydrogen has the potential to provide an inexhaustible supply of energy without generating pollution or greenhouse gases of any kind. It can also be economical and have a relatively high margin of safety when properly produced, stored and dispensed.
|
|
* 500l/h of pure hydrogen at 8 bars without compressor
* System control fully electronic
* Unattended operation 100% static
Completely autonomous and 100% automatic, this equipment with a recognized reliability is perfectly studied to the enclosed sites particularities taking account their geographic locations, the difficulty linked to the electrical power supply and the communications means.
|
|
* Pure hydrogen production from 0,5 to 10 Nm3/h
* Adjustable pressure from 1 to 10 bars
* System control fully electronic
All the hydrogen generators series « BP MP » are skid mounted ; the control system is fully electronic and the cooling is through natural air.
|
|
# Chemical process with very easy use
# 3 m3 of hydrogen gas produce in less than 10 minutes
# Especially adapted to isolated regions
# Gas reserve possible
Easy to handle, this generator does not require any maintenance other than its cleaning after each hydrogen production operation.
|
|
- Light thermal mass heater: Comparing to conservative type brick furnace, there is lots of reduction in heat-up time, power consumption, and footprint.
- Stable gas generation: Tube type retort integrated in round heater can generate cracking gas stable.
- Safety feature: Excess temperature protection, over pressure, thermocouple burnt alarm, etc can maintain the system safe.
- Save footprint, easy operation: Operation switch install on front panel. Insulator got thinner and can realize less footprint.
|
|
|
|
|
|
Nitrosource
autonomous 100%, with a reduced maintenance, the Nitrogen generators Parker replace the bottles of gas and the liquid supply of nitrogen.
Applications: inertage, network of nitrogen, packaging of food products...
Based on membrane technology, Nitrosource is the nitrogen generator of evolutionary design, enabling you to extend the capacity of the generator on site without repurchasing a complete generator. It thus follows the evolution of the growth of your factory. It produces nitrogen in full safety 24:00 /24H, until 4000 Nm3/h.
Nitrosource® enables you to easily produce nitrogen on site starting from compressed air.
Nitrosource® is composed of a central processing unit which can be wide in term of capacity by the addition of 5 pennies units. Thanks to the design Master/slave, up to 11 central processing units and theirs under units can be connected between them and managed like a single generator.
Nitrosource integrates a station of filtration of compressed air of high-quality. This characteristic optimizes laquality of compressed air in entry of the generator, ensuring a great longevity of the hollow fiber membranes. The generator is equipped with a digital system of data management to record and communicate the parameters of operation such as the pressure, the flow and the residual concentration out of oxygen.
The equipment is deprived of parts moving, ensuring an operation without concern, durable and
almost without maintenance. The generator is ready to function as soon as the compressed air is connected.
Nitrosource offers an unlimited quantity of nitrogen to you and can be easily connected to an external reservoir of storage. This will enable you to absorb the peaks of consumption in your applications where the demand for nitrogen is variable.
Ideal solution to replace the nitrogen bottles or the liquid nitrogen supply.
|
|
Nitroflow BASIC
autonomous 100%, with a reduced maintenance, Generators Parker the nitrogen replace the gas bottles and the liquid nitrogen supply.
Applications: inertage, network of nitrogen, packaging of foodstuffs...
Based on membrane technology, Nitroflow BASIC is the nitrogen generator with the most compact, esthetic integrated compressor and silencer of the market (<55 dBa). it produces nitrogen in any safety 24:00 /24H, until 1,5 Nm3/h.
It integrates a piloting by microprocessor, a control and adjustment of the parameters of work on touch screen and an analyzer of O2 to visualize the nitrogen purity. The strong point of the system: the compressors have one lifespan longer than those of our competitors (patented exclusive system). 2 years or 8000 operating hours exclusive guarantee.
Ideal solution to replace a nitrogen bottle/day.
|
|
The Parker Balston Zero Air Generator can produce up to 30,000 ml/min of high purity zero grade air. Compressed air is pre filtered down to 0.01 micron and then purified using a state-of-art combined heated catalyst module.
There are no moving parts and no noise, making the generator extremely reliable and ideal to install in the laboratory. Simple and quick to install, the Zero Air Generator requires minimal maintenance just once a year.
The resultant air is free of total hydrocarbons (THC) to < 0.05ppm making it ideal for all FID applications. The low levels guarantee a low signal to noise ratio, ensuring a flat constant base line with no peaks or fluctuations.
|
|
| ... products without technical information |
| |
|
|