|
|
SERVOPRO Plasma (k2001)
The SERVOPRO Plasma is designed for continuous monitoring of nitrogen in argon, helium or both. Its unique plasma emission detector provides an accurate, highly stable and reliable measurement. It uses a new micro-processor platform that offers enhanced connectivity, allowing you to remotely control the analyser from anywhere in the world.
- Unique Plasma emission detection
- Wide measurement range
- Lowest measurement range offers 10ppb resolution
Technology Used
Plasma Emission Detector - Servomex's unique non-depleting plasma emission cell offers an accurate, selective, and reliable measurement.
|
|
SERVOTOUGH Fluegas (2700) Combustion Gas Analyser
The SERVOTOUGH Fluegas measures oxygen and combustibles in flue gases to allow improved combustion efficiency and reduced emissions. The Fluegas gas analyser is designed to suit the most demanding needs of combustion efficiency applications in the Power Generation and Process Industries.
- Continuous measurement of Oxygen and / or combustibles
- Simple to operate and install
- Fully field maintainable
- High sensitivity sensor: ranges 0-500ppm to 0-2000ppm
- High range sensor: ranges 0-1500ppm to 6000ppm*
- Suitable for high temperature operation up to 1750°C (3182°F)
- *ranges up to 1 or 2% in certain applications
|
|
SERVOFLEX MicroMarine (5100 Marine)
The SERVOFLEX MicroMarine is an accurate, highly reliable portable gas analyser specifically designed for use in marine applications.
- Designed for measuring levels of oxygen or methane during gas freeing, cowing and other marine operations
- Meets the latest electrical and mechanical hazardous area safety requirements
- Accurate and reliable non-consumable sensors
- Backed by a worldwide support network
- No need for annual factory service
- Marine approvals: LR and DNV type approval, ABS Product Design Assessment.
|
|
|
|
|
|
VA-3000/VS-3000 Multi-component Analyzer
Product Overview
From environmental monitoring to developing new energy sources and chemicals for the new era, gas analysis systems are faced with needs and challenges that have changed dramatically over time. Responding to these new needs, HORIBA has developed the VA-3000, the versatile gas analyzer that's ready for the future. A single analyzer is now capable of measuring a wider selection of gas components utilizing many different types of sensor technology. Non-dispersive infrared (NDIR) modules are available to measure gases such as CO, CO2, NO, N2O, CH4, SO2 and others. A chemiluminescent sensor module may be included to measure NO or NOx with a standard converter. And four different types of sensor modules are available to measure O2 - galvanic, paramagnetic, zirconium oxide or magnetopneumatic. Designed to be compact and lightweight, the VA-3000 may have up to three sensor modules installed in a single analyzer case. This unique feature means the VA-3000 can be used today for a broad range of applications including research and development or environmental pollution monitoring, where efficiency and space-saving are crucial.
|
|
SERVOPRO 1440 Gas Analyser
The 1440D provides a convenient solution for the measurement of one or two of the following gases: oxygen, carbon dioxide, carbon monoxide and methane.
- Excellent stability and performance
- Low maintenance
- No electrochemical cells to replace or renew
- Variants suitable for flammable / toxic sample gases
- 19” rack, panel mount or bench-top case options
- Concentration and low flow alarms
Technology Used
Oxygen – Servomex’ unique paramagnetic cell, which offers a fast, linear, accurate, highly stable and selective response in a non-depleting rugged package.
Carbon monoxide (CO), carbon dioxide (C02), Methane (CH4) – Single beam, single wavelength infrared technology, which gives a highly stable, selective measurement.
|
|
SERVOPRO 4100 Gas Analyser
The 4100 is designed to meet the process control and product qualification needs of industrial gas producers and users.
- Easy to set up and operate
- Low maintenance
- Extremely stable and reliable sensors
- Can measure up to four gases simultaneously
- External analogue input facilities
- RS232 / RS485 serial data output
- Modbus TM communications
|
|
|
|
|
|
The FLAMCHECK portable combustion analyser system enables simultaneous quick and accurate measurements of the various chemical parameters bound to combustion with regard to industrial installations such as: Refineries; Steel industries; Power plants…
The gas sample is taken up through a probe and passed through a condensate trap and a solid particle filter, thereby avoiding any trace of humidity and dust.
The clean & dry sample is then directed to three electrochemical sensors allowing simultaneous measurement of the Oxygen (O2), the Nitrogen Monoxide (NO) and the Carbon Monoxide (CO) concentrations.
Advantages:
• Robust industrial design for daily use in harsh environments.
• High reliability of the measurements thanks to its automatic zero calibration (the time period between calibrations can be programmed).
• Automatic Condensate Recovery and draining
Enables optimum protection of the measuring cells.
• Automatic Protection of the measuring cells when highly concentrated or unusually high temperature samples are present.
• Data display on a large and interactive backlit screen for a user-friendly and simultaneous display of all parameters.
|
|
|
|
|
|
PG-250 Portable Multi-Gas Analyzer
Product Overview
The PG-250 is a portable stack gas analyzer that can simultaneously measure up to five separate gas components using the same proven measurement methods used in HORIBA's line of permanent CEMS. The PG-250 is ideal for CEMS certification testing (RATAs) or for use when stack gas emissions must be monitored periodically at one or multiple stacks.
The PG-250 uses non-dispersive IR detection for CO, SO2, and CO2; chemiluminescence (cross-flow modulation) for NOx; and a galvanic cell or an optional zirconium oxide sensor for O2 measurements.
The instrument can interface directly with a laptop computer through an RS-232C interface to record measured values. Major features include a built-in sample conditioning system with sample pump, fliters, and a thermoelectric cooler. An optional auxiliary thermoelectric pre-cooler (PS-200) is available to condition samples which contain excess water vapor.
The performance of the PG-250 has been tested and verified under the U.S. EPA ETV program.
|
|
SERVOFLEX MiniMP (5200 Multipurpose)
The SERVOFLEX MiniMP is a portable benchtop analyser with single or dual measurement and is an ideal solution for determining the composition of common gas mixtures in laboratories and light industrial applications.
- Suitable for accurately measuring levels of oxygen and carbon dioxide.
- All sensors use non-depleting technologies, maximising availability and reducing maintenance and running costs.
- Innovative construction gives a robust, single or dual measurement unit with space saving footprint.
- A range of sampling and power options to meet individual user requirements.
- Meets USFDA requirements for verification of medical oxygen USP and nitrogen NF.
|
|
|
|
|
|
Extrel builds Quadrupole Mass Spectrometers, Residual Gas Analyzers, APIMS sytems, Blister Analyzers and Bulb Crushers for Research, Development and Process Control. We build a range of standard, general purpose and application specific systems for research and industrial gas analysis. We have systems with ppm, ppb and ppt detection limits and for corrosive and non-corrosive applications.
--------------------------------------------------------------------------------
The MAX300-LG Benchtop Gas Analysis System: The MAX300-LG Benchtop Gas Analysis System is the latest addition to the Extrel CMS family of high performance gas analysis systems. It is designed with the high sensitivity and resolution and the flexibility needed to meet the challenges of the research laboratory and ruggedness and reliability needed on the production floor.
The MAX300-LG is unique in that it offers two separate software packages, either a true analytical software package or the Q5 Proces Control software, a true process control software package.
The MAX 300-LG can be used in identifing multiple unknowns or for monitoring and controling multiple gas streams. It is an ideal tool to take a product from basic research, through the development laboratory, onto the production floor and into final test.
|
|
Product Overview
The TCA-31 Series analyzers measure the specific composition of gases using a heat conductivity method that utilizes the differences in heat conductivity among electrically charged bodies. The analysis and operations units are housed in a single on-site unit, making maintenance and inspection easy. With a high level of consideration given to safety, the TCA-31 Series comes in two types, a heat explosion type and an internal pressure explosion resistant type. The units can be used for H2 gas analysis in a variety of industrial locations, such as nitrogen refining plants, mining facilities, and petrochemical plants, and, as a meter for safe process management, offer a long operating life, accurate display, and safe operation.
|
|
SERVOTOUGH SpectraExact (2500) Process Gas Analysers
The SERVOTOUGH SpectraExact series of photometric process analysers offer single or dual component gas analysis to suit virtually any process, combustion or emissions gas analysis application.
They are designed for industrial environments with the emphasis on rugged construction, high performance and simple operation.
The SERVOTOUGH SpectraExact series of analysers are highly flexible and can be configured to suit virtually any process environment.
- On-line, real time process analysis
- High reliability, accuracy and stability
- Low cost of ownership and long maintenance intervals
- Single & multi-component analysis capability
- Easy integration with DCS and other control systems
- Suitable for field mounting in hazardous area locations
|
|
ADEV plans and produces probes for the analysis of oxygen to employ in the various industrial fields with problematic different applicative.
The range, based on sensors to zirconium oxide differs for temperature of employment, onerous length of immersion, background, applications and applications to low cost.
It is placed side by side to the extractive models, or to zirconium oxide that paramagnetic or electrochemical and allows the analysis of oxygen in the better solution, beginning from fractions than ppm in volume to 100%.
|
|
ADEV plans and produces probes for the analysis of oxygen to employ in the various industrial fields with problematic different applicative.
The range, based on sensors to zirconium oxide differs for temperature of employment, onerous length of immersion, background, applications and applications to low cost.
It is placed side by side to the extractive models, or to zirconium oxide that paramagnetic or electrochemical and allows the analysis of oxygen in the better solution, beginning from fractions than ppm in volume to 100%.
|
|
Advanced Gasmitter for biogas applications
NDIR-Dual Wavelenth Principle
OEM-Gastransmitter with improved characteristics
• Simultaneous measurement of CO2 and CH4
• No cross sensitivity to water steam and H2S
• Maximum long term stability due to high grade devices
on the PCB
• Fast response time
• Superior accuracy due to improved signal-to-noise-ratio
• USB and RS485 interface
• Linearized analogue output: 4...20mA / 0...8V
• Display for measurement range deviation: 2...22mA output
• Web based communication software
• Simple integration into analyzers and measurement systems
• Customizable to measure various combinations of gas
|
|
Conditioning Systems
Every kind of gas analysis, either fairly straight forward single component analysis or complex multi component process gas analysis require application specific sample gas conditioning systems. These systems must deliver continuously reliable process data even under varying ambient and/ or process conditions.
It is quite obvious, that stack testing has other requirements than engine emission testing, EPA methods testing or process applications in the food industry just to name a few.
Bühler delivers modular designed prefabricated systems as mobile or stationary stand alone or 19” rack mount solutions and assists in planning application specific gas analysis systems on panels, in cubicles or analyser shelter.
Sample Gas Conditioning System SCS 19
Complete system for 19" rack
One or two gas streams
Modular design
Probe and cal gas controller
|
|
This units provide completely pre-installed sample gas conditioning for continuous use and can excellently be integrated into gas analysis systems. Its compact construction means that it takes up only little space.The units are ready for use within a few minutes.This, at last, makes the usual time-consuming procurement of individual components and assembly superfluous. Examples of applications for sample gas conditioning units: flue gas and process gas conditioning.
The units are also available as portable systems.
|
|
With its intuitive and easy to use operator interface, the CheckMate II headspace analyser is an important everyday tool in any quality control process of modified atmosphere products or for nitrogen flushed pharmaceutical products.
With the CheckMate II headspace analyser operator errors can easily be avoided due to the easy to use bar code recognition feature. The unit ensures that all important data is logged, such as operator name, product line, production date, batch number etc.
Data logging in a central database or on paper
The CheckMate II is available with an optional built-in printer ensuring that all logged data can be easily stored on paper. However, the data can also be transferred to a PC or server, either automatically via LAN or manually via RS232.
|
|
|
|
|
|
The CheckPoint II is a portable headspace analyser that gives operators and QC managers easy access to important information about the gas composition in modified atmosphere packages. In brief the CheckPoint II has data logging capabilities, the possibility to transfer data to a PC and an optional bar code scanner. Like its ‘big brother’ the CheckMate II, the CheckPoint II has a built-in intelligence to alert the operator to any quality problems with the gas content of the package. The CheckPoint II is ideal for small to medium volume production facilities or other situations where a portable analyser is useful.
The CheckPoint II is an easy to use headspace analyser that ensures the traceability of your modified atmosphere production - without relying on paper logs. The simple user interface ensures that line operators can easily be taught to use the CheckPoint II thus ensuring the shelf life of MAP packed products. With the optional built-in barcode scanner the traceability data of each product is easily stored together with other important information such as operator name, batch number etc. The more advanced features can be set up by the supervisor using the PC software.
|
|
|
|
|
|
CO2 & CH4 Infrared Gas Analyzer (Wall Mount) - IR600
In-situ Carbon Dioxide and Methane Detection Monitor
- Continuous monitoring of carbon dioxide or methane
- Dual wavelength infra-red sensors for long-term stability and accuracy
- Digital display with 4 to 20mA analogue output & alarm/control relay outputs
- Choice of ranges from percentage to trace concentrations
- Remote sampling as standard
IR600 in-situ analyzers continuously monitor carbon dioxide or methane in concentrations ranging from 100% down to ppm levels. Features include a dual wavelength sensor, remote sampling, digital readout, adjustable level relay outputs for alarm and control purposes, and minimal maintenance.
High performance is guaranteed by the infra-red sensor which makes use of a reference wavelength as well as a sensing wavelength, thus maintaining accuracy over long periods without the need to recalibrate.
An internal pump draws gas samples into the sensor through a particle filter from an intake which can be located at distances up to 30m from the monitor. The intake can be fitted with a moisture exclusion unit for use in wet environments.
A choice of seven concentration ranges from 0 to 100% down to 0 to 3000ppm (0.3%) is available for carbon dioxide monitoring and a choice of three, 0 to 100%, 0 to 30% and 0 to 10% for methane monitoring.
|
|
|
|
|
|
SERVOFLEX Mini Food Pack (5200 Food Pack)
SERVOFLEX Mini Food Pack is a small sample volume portable benchtop analyser especially designed to meet the needs of MAP/CAP testing in the food industry. Enables single or dual measurements for percent levels of oxygen and/or carbon dioxide.
For dependable quality control and checking of gas mixtures in Modified Atmosphere Packaging (MAP):
- Suitable for measuring % levels of oxygen (O2) and carbon dioxide (CO2)
- All sensors use non-depleting technology, maximising availability and reducing maintenance and operating costs
- Accurate, reliable and easy to use
- Customer pre-tested software offers ease of use, simple calibration and advanced features including datalogging to assist traceability
- Innovative construction gives a robust unit with a space saving footprint
- Rechargeable battery option
- A range of sampling accessories is available for taking measurement from rigid or flexible packs - including a can-piercing unit and semi-automatic extraction via an internal pump
|
|
|
Reliable measurement of ppm combustibles (CO + H2) or carbon monoxide (CO) together with oxygen, allows the user to determine and maintain the optimal O2 set point for the process. This results in improved product throughput, increased safety, longer equipment life, lower emissions and maximized fuel efficiency.
|
|
The analyser ARELCO ARC model 2008 IR MP-R is a compact and reliable instrument for specific measurement of CO2 or CO or CH4 in gas blending. The instrument is based on non dispersion infra red method (NDIR)
The touch sensitive display allow the user to see very quickly all parameters: gas contents, analogue output range, alarms status… and to get access to the menus.
The 2008 IR MP-R model is 19” rack type and integrates some data storing facilities, automatic calibration function. All data are available on digital interface RS232.
The IR technology requires a dry gas. The instrument could be couple to a gas dryer and speciel filter especially for measurement on flue gases.
|
|
AMETEK Western Research offers two high-performance tail gas analyzers, allowing the customer to choose the model they prefer. The model 900 ADA can measure H2S/SO2/COS/CS2 while installed remotely from the sample tap. When on-the-pipe measurement is required, the 880-NSL offers H2S/SO2 analysis with virtually no-maintenance due to its long lamp life and rugged design.
We also produce acid feed gas analyzers, pit gas analyzers, analyzers for TGTUs, and continuous emission monitors for the thermal oxidizer's stack.
|
|
The Monitor 90 Ecometers are used to measure gaseous inorganic chorine, fluorine or ammonium compounds.
They are ideal for process monitoring and emission control, and comply
to the requirements of the German emission control regulations
(BImSchV) - among the strictest in the world. The high system availability makes the Ecometer an ideal component of automatic control systems for emission control installations.
Advantages:
-Minimal reagent consumption
for low operating costs
-Low maintenance, with selfchecking and automatic recalibration
-Automatic correction for
sample pressure and temperature
-Low sensitivity to interference,
below statutory requirements
-High stability, with low standard deviation and drift
-Industry standard interfaces and outputs
|
|
The PowerMon Ionometer is a versatile applicable on-line measuring instrument, which is used for the monitoring of the legally prescribed limit value in the outlet of municipal and industrial purification plants.
Advantages:
-precise results
-connection of up to 100 external,
physical measuring sensors
-fully automatic operation
-easy, comfortable operation
-fast data transfer
-self-monitoring system
-remote maintenance and
network ability
-graphic user interface with interactive
Touch Screen operation
-update of the operating software or
download of data by USB stick
-minimum operating cost by small
reagent consumption
-second measuring point
without surcharge
-operation also possible
without housing
|
|
These analyzers and sensor assemblies are suitable for measuring fluoride concentration typically found in drinking water applications and are a simple, cost-effective solution for ensuring regulatory compliance in fluoridated drinking water.
Benefits:
- Low price
- Low maintenance
- No chemical additions
|
|
ANTEK's 9000F offers a cost-effective alternative to the common Wickbold method (oxy-hydrogen torch) of analysis, providing total fluoride determinations on gas, liquid, and solid samples safely within minutes instead of hours. It is far less expensive than ICP/MS; and, unlike other methods, the ANTEK 9000F is specific for fluoride without interference from other halides. The safe, non-hazardous ion specific detection method provides an analytical range from sub-ppm to percent levels.
Features & Benefits
- Specific for fluoride
- Sensitivity from sub-ppm to % levels
- Results in 5 to 15 minutes
- Non-hazardous operation
- Gas, LPG, liquid, and solid samples
|
|
FTIR Laboratory Spectrometer
Step up to the new MB3000 FTIR spectrometer from ABB.
It is the most reliable FTIR system in the market with the lowest cost of ownership. Combined with the intuitive Horizon MBTM FTIR software, the MB3000 will facilitate acquisition, processing and analysis of samples.
Easy to use and maintenance free, it will provide constant analysis results for years to come. The MB3000 offers ease of use, reliability and constant results in order to address the concerns of lab users.
|
|
Features:
- A modular industrial spectrometer designed for versatile external sample interfacing
- A selection of optimized gas cells
- Powerful AutoQuant Pro software
- High quality spectral reference libraries
- Assistance with method development, (including EPA and SEMATEC protocols)
|
|
|
|
