|
|
|
Reliable measurement of ppm combustibles (CO + H2) or carbon monoxide (CO) together with oxygen, allows the user to determine and maintain the optimal O2 set point for the process. This results in improved product throughput, increased safety, longer equipment life, lower emissions and maximized fuel efficiency.
|
|
|
|
|
|
The Rapidox 3100 provides fast and accurate analysis over a wide oxygen range using a rugged, long-life zirconia sensor. It is available in models to measure just oxygen, or oxygen plus either CO or CO2.
Easy to use and simple to calibrate using your choice of any two gases, the Rapidox 3100 offers the high performance and flexibility usually found only in much more expensive products.
The Rapidox 3100 incorporates a powerful and silent linear piston pump for remote sampling of gas. From the display to the outputs, all features are fully programmable using the keypad on the front panel. Connections are made using 6/4mm flexible tubing to the front panel input and output unions and the front panel includes a flow gauge allowing the user to control the rate of gas flow into the analyser.
The Rapidox is supplied with powerful Windows software for easy data-logging and graphing. Just switch on and start measuring...
- Bench mounted zirconia oxygen analyser with internal sensor & sample pump
- Rapid response long-life sensor
- Easy to calibrate using any two gases
- Fully programmable audible alarms with signal output
- Sample flow rate adjustable from 0 to 4 litres per minute
- Suitable for applications where the gas must be sampled remotely
- Gas is sampled through flexible tubing connected to the front of the analyser
- Perfect for analysis of room air and difficult to access locations
- Perfect for static gas applications
- Suitable for gases up to 150°C
|
|
The analyser ARELCO ARC model 2008 IR MP-R is a compact and reliable instrument for specific measurement of CO2 or CO or CH4 in gas blending. The instrument is based on non dispersion infra red method (NDIR)
The touch sensitive display allow the user to see very quickly all parameters: gas contents, analogue output range, alarms status… and to get access to the menus.
The 2008 IR MP-R model is 19” rack type and integrates some data storing facilities, automatic calibration function. All data are available on digital interface RS232.
The IR technology requires a dry gas. The instrument could be couple to a gas dryer and speciel filter especially for measurement on flue gases.
|
|
KIMO, French manufacturer of measuring instruments, designed and developed AQ100 to meet with requirements of new regulations on CO2 air detection.
Key features of AQ100: easy and friendly use, large display, accurate measurements, CO2 / temperature probe.
- CO2 : from 0 to 5,000 ppm
- temperature (integrated inside the probe) : from –20 to +80°C
AQ100 is supplied with calibration certificate.
|
|
|
|
|
|
|
The MICRO III, with its small dimensions of only 4,7 x 8,8 x 2,5 cm, is the ideal gas detector for personal protection. It weighs only 70 g, but yet offers the loudest alarm in its class (95dB). Easily placed into the shirt pocket or put on the belt you get the sixth sense for gas hazards for more than 5000 hours on a single battery (AA). The MICRO III uses the Smart-sensor technology, which means that if your detection requirement changes, the MICRO III can be easily adapted to the new measurement task by pre-calibrated, user replaceable sensors. The MICRO III is available for the following gases: oxygen, hydrogen sulfide, carbon monoxide, sulfur dioxide, nitrogen monoxide, nitrogen dioxide, chlorine, chlorine dioxide, hydrogen chloride, hydrogen cyanide, ammonia, ethylene oxide, phosphine, silan, phosgene, hydrogen and ozone. For gas sampling an optional pump, which has its own power supply, can be attached to the detector. The durablitly, ease of use, and low maintenance of the MICRO III is an investment for many years.
|
|
GfG is a world leader for gas detection and measurement technology. For over 40 years GfG has specialized in designing, developing and producing the safest and most reliable equipment and sensors available.
GfG offers an extensive range of portable monitors and fixed systems. The product range includes sensors, the world´s smallest gas monitors, micro-processor controlled multi-gas detectors and computer aided system solutions. GfG provides diverse solutios for Toxic, Explosive and Oxygen gas detection in air and water.
GfG equipement is used in a variety of applications and industries including automotive, chemical industries, landfills, steel industries, hospitals, mining, public utilities, food processing, research institutes, universities and wherever the protection of life and property is needed.
|
|
GfG is a world leader for gas detection and measurement technology. For over 40 years GfG has specialized in designing, developing and producing the safest and most reliable equipment and sensors available.
GfG offers an extensive range of portable monitors and fixed systems. The product range includes sensors, the world´s smallest gas monitors, micro-processor controlled multi-gas detectors and computer aided system solutions. GfG provides diverse solutios for Toxic, Explosive and Oxygen gas detection in air and water.
GfG equipement is used in a variety of applications and industries including automotive, chemical industries, landfills, steel industries, hospitals, mining, public utilities, food processing, research institutes, universities and wherever the protection of life and property is needed.
|
|
|
|
|
|
Q-TRAK™ Indoor Air Quality Monitor
Model 7565
Providing a comfortable, safe and healthy indoor environment is an increasingly important concern. Good air quality increases concentration and productivity. It can also reduce lost days due to absence. TSI’s Q-TRAK IAQ Monitor provides quick, accurate information to assess key IAQ parameters.
Features and Benefits
• Measures CO2, temperature, humidity, and CO
• Calculates dew point, wet bulb and percent outside air
• Displays up to 5 measurements simultaneously
• One instrument with multiple plug-in probe options
• User-selectable logging intervals and start/stop times
• Store up to 38.9 days of data collected at one-minute log intervals
• TRAKPRO™ software provided for data logging, analysis and documenting results
- Perform single-point tests for quick building surveys
Easy to Use
The Q-TRAK features a menu-driven user interface for easy operation. On-screen prompts and step-by-step instructions guide the user through operation and field calibration. The Q-TRAK also features an ergonomic, overmolded case design and a keypad lockout to prevent tampering during unattended use.
|
|
FireBoss 100 Carbon Monoxide Sensor
FireBoss 100 Carbon Monoxide Sensor -All CO sensors are not alike. The FireBoss toxic 0-25-100-500 ppm CO sensor line has been re-designed and enhanced over a period of two decades of underground mining use, and has evolved as a tough, dependable product with exceptionally long-term stability. Others are often plagued with temperature problems and short life expectancy. We frequently observe sensors still working on their first electrochemical cell after 5- 8 years of grueling service.
|
|
|
The 300 Series of analyzers use the Gas Filter Correlation (GFC) NDIR technique to measure trace level and stack level concentrations of CO, CO2, and N2O. The GFC technique rejects potential interferents, such as water, and allows unprecidented sensitivity. From background monitoring to air separation, the 300 Series is the best value for precision IR monitoring.
|
|
The CO-measuring system was developed according EU regulations for controlling the concentration of the limit values of carbon monoxide (CO) and nitrogen (NO) if applicable.
The warning-system can be connected to the tunnel DCS.
|
|
|
|
|
|
The new Serinus 10 Ozone (O3) analyzer is the next generation in
gas monitoring technology.
The Serinus 10 Ozone analyzer uses proven non-dispersive
ultraviolet (UV) absorption technology to measure O3 in ambient air
(LDL <0.5ppb, Range 0-20ppm). Combining several new technical
advances and innovative features, the Serinus delivers Ecotech’s
renowned performance and excellent value.
Superior performance
• U.S. EPA approved
• New zero volume fittings and flexible Teflon® tubing improves system integrity
• Advanced diagnostics and status indicator deliver better instrument status information
• New removable flash memory stores eight years of data, including up to 16 individual parameters and event logs
Lower Cost of Ownership
• More affordable to purchase, operate and maintain
• Utilises low cost consumables, spare parts and accessories
• Reduced power usage and a lower carbon footprint
Reduced Maintenance
• Remote diagnostics and maintenance functions including calibration, parameter set-up, operational status etc.
• Standardised components reduces the cost of spare parts, accessories and consumable items
• New “dual particulate filter” can reduce scheduled maintenance calls by up to 50%
|
|
The Tocsin 900 provides ultimate system flexibility for larger gas detection systems up to 255 detectors in size. The Tocsin 900 control panel is compatible with the Tocsin 102A and 103A range of Toxic, Flammable and Oxygen detectors. To compliment the system a range of accessories, calibration sets and audio visual alarms and addressable outputs are available. Full control through the system software is available to group, zone or vote detectors. Detectors can be calibrated and interrogated from the control panel. Assign tags to sensors and set rising, falling, latching or non-latching alarms. Eight RS485 ports allow configuration of eight single ended cable runs of up to 32 sensors or four double ended loops for greater cabling integrity.
Features
24V DC or 110/230V AC Options
Control up to 255 detectors
Digital Addressable Detectors
User configurable alarms
Add extra alarm relay outputs
RS485 I/O
On Board event logging
Download event memory and panel set up to PC
|
|
The Tocsin 900 provides ultimate system flexibility for larger gas detection systems up to 255 detectors in size. The Tocsin 900 control panel is compatible with the Tocsin 102A and 103A range of Toxic, Flammable and Oxygen detectors. To compliment the system a range of accessories, calibration sets and audio visual alarms and addressable outputs are available. Full control through the system software is available to group, zone or vote detectors. Detectors can be calibrated and interrogated from the control panel. Assign tags to sensors and set rising, falling, latching or non-latching alarms. Eight RS485 ports allow configuration of eight single ended cable runs of up to 32 sensors or four double ended loops for greater cabling integrity.
Features
24V DC or 110/230V AC Options
Control up to 255 detectors
Digital Addressable Detectors
User configurable alarms
Add extra alarm relay outputs
RS485 I/O
On Board event logging
Download event memory and panel set up to PC
|
|
|
The HORIBA Advantage combines advanced combustion technology with a unique, patented design. HORIBA first introduced analyzers for emission and air monitoring in 1964. Today, HORIBA Jobin Yvon is the only company that offers the experience of HORIBA combustion analyzer technology and over 180 years of expertise and experience in optics and spectroscopy.
|
|
Monoxor® III
The Monoxor III offers service technicians the easiest and most affordable way to locate CO in ambient air as well as stack gases.
Bacharach's Monoxor III is a continuous sampling instrument that quickly and accurately measures levels of CO between 0 and 2,000 ppm. In addition, the Monoxor III is supplied with a stainless steel probe and five feet of tubing to sample CO found in flue gases of residential furnaces, combustion appliances, commercial and industrial boilers.
An optional wireless IrDA printer provides a permanent record of the detected CO level.
|
|
CO Check is the convenient, dependable way to detect and measure dangerous carbon monoxide (CO) in both residential and commercial/industrial applications.
The instrument combines superior accuracy and reliability with simple, one-hand operation. Intuitive "stoplight" LEDs and an audible alarm alert you to the danger level of CO present, while the large easy-to-read LCD provides a precise readout of the exact CO level. A protective holster case with belt clip adds to your convenience.
CO Check is a natural companion for GAS-Mate combustible gas leak detector, since both enhance heating system safety. For accurate, reliable CO detection in a convenient, affordable package that has all the features you need, CO Check is the tool for you.
|
|
Features:
- Measures ambient CO and ambient CO2.
- Datalogs up to 255 records with variable sampling time from 1-10 minutes.
- Records time and date.
- Prints to optional printer using infra-red emitter.
- User adjustable alarms for CO and CO2.
- Long life Ni Mh batteries changed in situ with charger.
- Internal pump for fast measurements in room air or ducts.
- Long sampling hose for 'silent' sampling of high profile / public areas. Complete with SGAFP probe, spare spigot, fast charger, manual and carry cas
|
|
KIMO, French manufacturer of measuring instruments, designed and developed AQ200 for CO/CO2, hygrometry, temperature and pressure control.
Key features of AQ200 :
- easy and friendly use: large display, browsing joystick
- multi-probe innovating system: can be used with 3 probes :
- CO / temperature: from 0 to 1,000 ppm and from -20 to +80°C
- CO2 / temperature: from 0 to 5,000 ppm and from -20 to +80°C
- CO2 / temperature / hygrometry: from 0 to 5,000 ppm, from -20 to +80°C, from 5 to 95%RH
- 3 interchangeable measuring modules: individually calibrated and automatically recognized by the instrument :
- 1 climatic conditions module (hygrometry, air pressure and temperature)
- 1 thermocouple temperature module (4 channels)
- 1 current / voltage module
AQ200 can measure and store up to 8,000 values, which can be saved on your PC, via wireless communication system.
|
|
| ... products without technical information |
| |
| ... products without technical information |
| |
CMS-2 Carbon Monoxide Monitor/Alarm
The CMS-2 is a field portable carbon monoxide monitor and alarm for respirator air supply. If CO exceeds 10 ppm, it triggers a warning light, and a high-decibel audible alarm. The rugged case with comfortable carrying handle, protects the monitor from minor impacts. Used by blasting and painting contractors for field operations.
Available Literature:
23248 - CMS 1 & 2 Carbon Monoxide Alarms
|
|
|
|
|
|
The F2000IAQ-CO 60xx/80xx series monitor and controller is used to monitor and control room CO level, as well as room temperature with optional relative humidity detection and display. Other options for additional outputs can be provided with RS485 communication, up to 3 dry relay contact and analog outputs.
The F2000IAQ-CO-60xx/80xx can be used as a programmable logical controller to control CO level, temperature or humidity and also as a transmitter to other device, DDC/PLC controller or other automatic system. It provides RS485 communication interface with independent address to PC or other control system.
Features:
- Real time detecting and display CO level with range from 0 to 1,000ppm.
- LCD can display CO, temperature and optional humidity at the same time.
- Preset the 1st and 2nd alarm set points for CO level.
- Providing one 0-10V analog output or up to two dry contact relay outputs.
- Analog output with two alternatives; linearised over full range output or PID control output.
- Semiconductor sensor technology with long lifetime..
- Multiple functions and high performance with low price..
- Optional RS485-communication interface, 15 KV antistatic protection, independent address setup to connect to PC or other system.
|
|
|
|
|
|
The Tocsin 103 series of gas detectors are designed for cost effective safe area gas detection solutions. They incorporate micro processor technology to give a stable 4-20mA process signal output or digital addressable output. The addressable output option allows detectors to be networked on a single cable run giving dramatic reduction in installation costs. The in built processor can be used to pre-calibrate the sensor prior to installation. Alternatively calibration can be achieved on site via the Oliver IGD control panel or locally using a handheld PC device or laptop. A range of sensing technologies can be incorporated into the housing to provide the most appropriate detection method.
ATEX VERSIONS (TOCSIN 102) AVAILABLE
Available sensor types include
IGD’s own MKIII and Type B Pellistors,
Infra Red
Electrochemical Devices
Gas Detected Include
Flammable Gases
Carbon Dioxide
Carbon Monoxide
Nitric Oxide
Nitrogen Dioxide
Hydrogen Cyanide
Chlorine
Hydrogen Sulphide
Ammonia
Oxygen
Sulphur Dioxide
Hydrogen Chloride
ATEX VERSIONS ALSO AVAILABLE
|
|
D-G 102 PM Measuring System for CO
The CO-measuring system was developed according EU regulations for controlling the concentration of the limit values of carbon monoxide (CO) and nitrogen (NO) if applicable.
The warning-system can be connected to the tunnel DCS.
|
|
|
|
|
|
Series 9000 cross stack infrared, in-situ carbon monoxide monitors provide high accuracy and reliability, coupled with straightforward installation and setup and is suitable for a wide range of industrial combustion efficiency monitoring applications. This carbon monoxide monitor is designed to provide the operator with a fast response measurement, essential to the efficient combustion control of any boiler system.
Product Range:
Model 9100 Carbon Monoxide Monitor
Model 9200 MkII High Performance Carbon Monoxide Monitor
Features and Benefits:
Direct continuous measurement of Carbon Monoxide
True representative measurement - reading averaged across entire duct
Improved combustion control and efficiency savings
Low running and maintenance cost
High reliability - robust design
Simple installation - advanced alignment features
Over 20 years of experience in carbon monoxide monitoring - 4th generation product
The 9200 MkII has all the facilities of the 9100 with the addition of:
Clear stack, open path gas calibration
Automatic cell leak detection
4 gas cell, TUV approved measurement technique
Automatic duct pressure correction
|
|
| ... products without technical information |
| |
 see the results for the following category : Gas sensors |
|
|
