|
|
|
|
|
|
P-TRAK® ULTRAFINE PARTICLE COUNTER
The TSI's P-TRAK® Ultrafine Particle Counter (UPC) - Model 8525 is a totally new approach to eliminating IAQ problems. This portable instrument detects and counts ultrafine or nanoparticles (smaller than 1 micrometer in aerodynamic diameter) that often accompany or signal the presence of a pollutant that is the root cause of complaints. It is now being used to track down some of the most difficult IAQ problems imaginable.
The P-TRAK UPC locates obvious pollutant sources such as boilers, furnaces, vehicles and also detects the not-so-obvious sources such as photocopy machines and printers. Use this instrument to detect the migration of toxic exhaust gases, malfunctioning office equipment, pinhole gasket leaks in boilers and a wide variety of other problems.
Features and Benefits:
- Real-time ultrafine particle counter
- Solves tough IAQ problems
- Easy to use
- Data log information
Applications:
- Check office equipment
- Clean room containment checks
- Filter checks
- Check fume hoods
- Check safety cabinets
- Vehicle emission migration
- Combustion leaks
- Control smoking areas
|
|
|
|
|
|
AEROTRAK™ HANDHELD PARTICLE COUNTER
The TSI AEROTRAK™ 9303 Handheld Particle Counter offers the most features and flexibility for customers interested in low cost and versatile handheld particle contamination monitoring. The 9303 features a sturdy and yet lightweight high-impact injection-molded plastic design for easy handling. The instrument is easy to configure using an intuitive keypad. The internal memory can store up to 1,500 sample records of particle count data which can be conveniently viewed on screen or downloaded using a USB port.
Features and Benefits:
- Size range 0.3 - 10 μm
- 0.1 CFM (2.83 LPM) flow rate
- Up to 3 channels of simultaneous data
I- SO 21501 compliant
- USB serial output
- 1,500 sample record storage
- 999 location labels
- Large 3.6-inch display
- On screen data review
- User selectable middle size channel
- Removable Li-ion battery
- Internal audible alarm
- Intuitive keypad menus
- High impact injection molded plastic
- Lightweight - only weighs 1.3 lbs (0.58 kg)
Applications:
- Particle contamination monitoring
|
|
|
Kanomax handheld particle counters are designed for cleanroom certifications. The Model 3887 3-channel particle counter is CE certified and ensures compliance with industry standards, such as ISO 14644-1. It is also perfect for initial assessment of indoor particulate levels and provides instant, repeatable levels of toxic parameters, VOCs and particulates.
|
|
|
Kanomax handheld particle counters are designed for cleanroom certifications. The Model 3886 measures 5 particle sizes simultaneously with optional multi-functions, such as air velocity, temperature, and humidity. Its low air velocity measuring function is suitable for laminar flow units.
|
|
|
The Model 3800 is a handheld condensation particle counter that detects ultrafine particles in many applications. With this advanced technology, users can implement nano-sized particle research in occupation and working areas. The Model 3800 is appropriate as a screening tool to evaluate filter performance and gasket leakage. It is also an optimal tool to detect black carbons, such as soot and smog, which are normal constituents of exhaust contaminants from combustion.
|
|
|
The Model 3900 is a CE certified 6-Channel Portable Laser Particle Counter with a high flow rate of 1.0 cfm. The Model 3900 has a large color touch screen and its user-friendly interface makes operation easy. In addition the Model 3900 offers multi-parameter measurements including airflow, air temperature, humidity, and differential pressure. It also includes a multi-standard operation mode to ensure compliance with industry standards, such as ISO 14644-1, Federal Standard 209E, British Standard 5295 and EC GMP.
|
|
Features the sensitivity of larger instruments and easy handheld operation. Counts two sizes of particles; the second size is user-selectable. Configure sample times from one second up to 24 hours. Automatic shutoff when the battery charge drops below a safe operating level to maintain power to preserve data.
-0.3 micron sensitivity (227B) or a 0.5 micron sensitivity (227A)
-Counts two sizes of particles
-Compatible with PortAll Version 2 software
|
|
From the MET ONE legacy, Hach Ultra continues providing superior sampling with high reliability for electronics and pharmaceutical cleanroom applications
|
|
PC 2400 PS Portable Sampler
The PC 2400 PS Particle Counter provides the user unequaled flexibility. The instrument operates as a Grab-Sampler for analysis of individual samples, and in continuous, On-Line mode for real time process monitoring. Windows based software provides instrument configuration, data acquisition, and reporting capabilities to meet the user's specific needs.
BENEFITS/FEATURES
- Laboratory or On-Line use
- Fully portable with carrying case
- Low maintenance sample cell
- User adjustable size ranges
- Automatic sample purge
- Up to 16 size ranges
- Easy to use Windows based software
|
|
|
|
|
|
Characteristics
The new STAUFF Laser Particle Counter I is a microprocessor-controlled 8-channel particle counter designed for monitoring the degree of contamination of mineral based hydraulic fluids. In contrast to other commercially available particle counters, the LasPaC I is characterized by a few special features. The readings from the LasPaC I will immediately indicate the condition of the hydraulic system, the data will be documented, and you will be able to intervene at an early stage in order to prevent wear and damage to the components in the hydraulic system. This does not only minimize repair costs, but also reduces overall equipment downtime.
Technical Data
* Microprocessor-controlled 8-channel particle counter for contamination monitoring of mineral based hydraulic fluids
* Laser sensor cross-section: 500 x 500 %u03BCm
* Maximum concentration: 24,000 p/ml at a flow rate of 25 ml/min (ISO 4406 Code 23)
* Calibration according to ISO 11 171 (1999):
4 to 70 %u03BCm(c) relating to ISO 4406 (1999) and SAE AS4059 Rev. D (2001)
* Calibration according to ISO 4402 (1991):
2 to 100 %u03BCm relating to ISO 4406 (1987) and NAS 1638 (1964)
|
|
DirectSense IAQ Monitors from GrayWolf make proactive indoor air quality surveys efficient and easy to conduct. Optimize the balance between facility energy efficiency and occupant health & comfort. Identify potential IAQ issues before they become problems and respond immediately to complaints with the highly accurate, extremely advanced and the most intuitive portable IAQ meters and test instrumentation available today.
This IAQ meter is designed for both walk-thru surveys and for long term (hours/days/weeks) trend logging: the 2 modes necessary for thorough Indoor Air Quality investigations.
|
|
|
The Kanomax IAQ Monitor 2211 features quick start-up and high accuracy in measuring carbon dioxide and carbon monoxide concentration levels in the environment. Temperature and humidity are also simultaneously measured in ah handy lightweight design.
|
|
|
|
|
|
The MICRO III, with its small dimensions of only 4,7 x 8,8 x 2,5 cm, is the ideal gas detector for personal protection. The single gas detector with ATEX certification weighs only 75 g. It detects reliably oxygen, hydrogen or many toxic gases like hydrogen sulphide, ammonia, ozone, carbon monoxide, etc. The current gas concentration is shown on a large display. With a loud alarm of 95 dB and a changing frequency the small single gas detector is audible even in noisy environments. Simultaneously, two bright and alternately flashing LEDs indicate a gas alarm. Three alarm levels and the battery alarm provide comprehensive protection.
With a permanent operation of 24 hours a day a single AA battery powers this instrument for up to 9 months. The long-life smart sensors allow the change to other gases without any problems, since the detector recognizes the new sensor type. A high-performance pump (as per ATEX) for gas sampling can be easily attached, ensuring to detect gas hazards in confined areas.
Gases to be detected: O2, H2S, CO, NO, NH3, HCN, HCl, SO2, H2, C2H4O, SiH4, PH3, COCl2, NO2, Cl2, O3, ClO2.
|
|
The Casella CEL Microtherm Indoor Air Quality instrument is designed to monitor and record the indoor environment of storage facilities, factories, office or general workplace environments.
The overall instrument is compact and portable, allowing it to be transported and operated by a single person. Power is supplied from the mains, re-chargeable battery pack (option) or a combination of both. The fully integrated comprehensive software enables the user to archive data and generate reports automatically
|
|
Quest Indoor Air Quality Monitors provide you with a single source diagnostic tool for recording, reporting, charting, and analyzing your indoor air quality data.
Typical Applications for Indoor Air Quality Monitors include:
IAQ Complaint Investigation and Mitigation
Air Exchange Rate Measurement
HVAC System Performance Monitoring
HVAC System Balancing
Mold Investigation and Remediation
Health and Comfort Assessment
|
|
| ... products without technical information |
| |
SB1// D94.61:
• For automatic defrosting of industrial refrigeration plant, commercial
visicoolers and display counters.
FEATURES:
Pre-set number of defrost cycles per day: 1, 2, 3, 4, 6.
Adjustable defrost period with variable profile cam.
Independent power supplies for synchronous motor and for switches
High contact rating (SPDT).
Safety guard for wiring terminals in accordance with CEI 23 – 11 (for
SB1).
ENEC – 03 approval
SB3// D94.63:
• For automatic defrosting of industrial refrigeration plant, commercial
visicoolers and display counters.
FEATURES:
From 1 to 12 defrost cycles per day thanks to non detachable tabs.
Defrost time easily adjustable from 1 to 56 minutes.
Fan delay easily adjustable from 0 to 15 minutes (for SB3.82).
Independent power supplies for synchronous motor and for switches.
High contact rating (SPDT).
Safety guard for wiring terminals in accordance with CEI 23 – 11 (for
SB3).
ENEC – 03 approval.
|
|
The Saia® Control Components product range covers electronic timers, counters, control relays and energy meter.
Saia® Switzerland as the company location signifies, means a commitment to the quality of the components which are used by our customers.
|
|
|
Allen-Bradley offers the broadest range of relays and timers worldwide. They are designed, manufactured and tested to meet the most demanding worldwide standards and ratings. One-stop shopping saves you time and money, lowering your total cost of ownership. Our General Purpose Relays and Timers offer reliable design, quick replacements, panel space-saving and solutions. Our Industrial Relays and Timers are designed for heavier-duty applications, large loads, long life and safety circuits. Use our main menu to see the latest line-up of Relays and Timers that offer increased functionality, flexibility and performance.
|
|
|
Tabor has been a source for innovative counter/timers setting new standards for frequency and time measurements since the 1960s. The current product line features solutions spanning from low level to the most complex measurement applications.
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
