|
|
|
|
|
|
The MICRO III, with its small dimensions of only 4,7 x 8,8 x 2,5 cm, is the ideal gas detector for personal protection. The single gas detector with ATEX certification weighs only 75 g. It detects reliably oxygen, hydrogen or many toxic gases like hydrogen sulphide, ammonia, ozone, carbon monoxide, etc. The current gas concentration is shown on a large display. With a loud alarm of 95 dB and a changing frequency the small single gas detector is audible even in noisy environments. Simultaneously, two bright and alternately flashing LEDs indicate a gas alarm. Three alarm levels and the battery alarm provide comprehensive protection.
With a permanent operation of 24 hours a day a single AA battery powers this instrument for up to 9 months. The long-life smart sensors allow the change to other gases without any problems, since the detector recognizes the new sensor type. A high-performance pump (as per ATEX) for gas sampling can be easily attached, ensuring to detect gas hazards in confined areas.
Gases to be detected: O2, H2S, CO, NO, NH3, HCN, HCl, SO2, H2, C2H4O, SiH4, PH3, COCl2, NO2, Cl2, O3, ClO2.
|
|
Hydrosteel 6000 is the ultimate portable monitoring tool for sour, HF and high temperature corrosion and diffusible hydrogen damage in steel.
The intrinsically safe instrument is totally non-intrusive and with minimal test surface preparation, and no consumables such as grease required, reliable measurements can be made within a minute.
Measurements can be taken from small pipes and large vessels, at any orientation and at any temperature up to 500 °C (932 °F), with a single probe.
|
|
DirectSense IAQ Monitors from GrayWolf make proactive indoor air quality surveys efficient and easy to conduct. Optimize the balance between facility energy efficiency and occupant health & comfort. Identify potential IAQ issues before they become problems and respond immediately to complaints with the highly accurate, extremely advanced and the most intuitive portable IAQ meters and test instrumentation available today.
This IAQ meter is designed for both walk-thru surveys and for long term (hours/days/weeks) trend logging: the 2 modes necessary for thorough Indoor Air Quality investigations.
|
|
|
The Kanomax IAQ Monitor 2211 features quick start-up and high accuracy in measuring carbon dioxide and carbon monoxide concentration levels in the environment. Temperature and humidity are also simultaneously measured in ah handy lightweight design.
|
|
The Casella CEL Microtherm Indoor Air Quality instrument is designed to monitor and record the indoor environment of storage facilities, factories, office or general workplace environments.
The overall instrument is compact and portable, allowing it to be transported and operated by a single person. Power is supplied from the mains, re-chargeable battery pack (option) or a combination of both. The fully integrated comprehensive software enables the user to archive data and generate reports automatically
|
|
Quest Indoor Air Quality Monitors provide you with a single source diagnostic tool for recording, reporting, charting, and analyzing your indoor air quality data.
Typical Applications for Indoor Air Quality Monitors include:
IAQ Complaint Investigation and Mitigation
Air Exchange Rate Measurement
HVAC System Performance Monitoring
HVAC System Balancing
Mold Investigation and Remediation
Health and Comfort Assessment
|
|
| ... products without technical information |
| |
PM100-G - Fiber Optic Power Meter
Simple optical power and loss measurement
PM100-S - Fiber Optic Power Meter
Simple optical power and loss measurement
PM200 - Fiber Optic Power Meter
Link certification and reporting tool
FO600 - FiberMeter Optical Power Meter
FO610 - High Power FiberMeter Optical Power Meter
Ideal for testing and certifying in both Multimode and Single Mode applications
|
|
Ideal for link qualification, the FiberBasix 500 series comprises the ELS-500 Light Source and the EPM-500 Power Meter. These instruments come with pass/fail thresholds (LED indicator) and a memory capacity of 1000 data items.
Applications
Link-loss characterization (ELS-500 Light Source)
LAN/WAN certification (ELS-500 Light Source)
Link-loss characterization and LAN/WAN certification (EPM-500 Power Meter)
Key Features and Benefits
Error-free testing features: automatic wavelength recognition, and no offset nulling required
Data transfer to a PC via USB connection
One-touch storage of results for all wavelengths at once (on the EPM-500)
Complete reporting software
|
|
|
The OP510 was specifically designed for applications where cost effective solutions for measuring, monitoring and logging of insertion loss or power fluctuations are needed. The OP510 is a small (4"x2"x1.25") desk friendly module designed such that minimal movement and bending of the reference- and test cables is necessary. This results in stable, accurate and repeatable measurements.
|
|
Two FasTesT ports: a three-wavelength singlemode port, including either 1625 nm or 1490 nm, and an optional two-wavelength multimode port, for a total of up to five wavelengths
Visual IL and ORL pass/fail analysis
Compatible with both the FTB-400 and FTB-200 platforms
FTTx ready: allows for the testing of passive optical networks (PONs) at 1310 nm, 1490 nm and 1550 nm, the three wavelengths recommended by the ITU-T (G.983.3) for PONs
Three-year warranty and recommended calibration interval, error-free testing and minimized training time
|
|
|
Luna Technologies' Optical Backscatter Reflectometer (OBR) delivers unprecedented inspection and diagnostic capabilities for the fiber-optics industry. Luna's state-of-the-art OBR provides isolation of faults and problems well before final test, saving hours in rework and hard dollars in yield loss.
|
|
|
Insertion Loss and Return Loss measurement for all four FTTX wavelengths. The 'no mandrel' method combined with concurrent dual-wavelength measurement makes this instrument the most efficient tool in FTTX component verification.
|
|
| ... products without technical information |
| |
|
Kanomax anemometers can measure a wide variety of parameters to test ventilation rate. The parameters include air velocity, airflow, static pressure, temperature, and humidity of the indoor environment.
|
|
|
|
|
|
Specially developed for the supervision of clean-rooms, the CPE 300 is dedicated to measures of low pressure andor depression of air or neutral gases from 0/+10 Pa to -1000 /+1000 Pa.
The CPE 300 presents the advantage to become integrated perfectly into walls and to answer to the standard of cleanliness thanks to its stainless case (brushed or with lacquered).
It is equipped with 2 visual and audible alarms, with 2 reversers relays, of a big electroluminescent display and a process of autocalibration which guarantees in the time an excellent stability and a reliability of the measure in low as in high scale.
Thanks to its digital communication (RS 232 and Protocol Modbus RS 485), it offers the possibility of showing alternately (in addition of the measure of pressure) two other parameters resulting from temperature, humidity, velocity or airflow external sensors (KIMO).
Two innovative systems to facilitate the maintenance on-site :
· Its measuring element benefits from the SMART PRO system. It is individually adjusted and is automatically recognized by the device. Thanks to this process, it is possible to replace the measuring element in a simple and fast way without return of the sensor to the factory.
· The calibration in front face : this system allows to proceed to the calibration of the device without un-mounting it.
The sensor CPE 300 is so always operational !
Join our distribution network all over the word....Contact us !
|
|
The P571 pressure sensor is a high stability, small diameter, stainless steel pressure sensor intended for use in pressure transducers and other OEM pressure measurement applications. Its thin-film metal strain gauge circuit enables a long-term stability of better than 0.1% per year. Options include Hastelloy, 500 Vac insulation resistance, integral sputtered thin-film RTD, as well as various optional specifications on TC Zero and TC Span.
The unique design can be used with an infinite variety of pressure fittings, which can be supplied by SMD or provided by the customer. Ideal for pressure transducers and transmitters as well as other pressure measurement applications including process control, hydraulic systems, general industrial, down-hole, pressure calibrators, Cenelec applications, aerospace, automotive and more.
|
|
|
SMD’s Peerless engineering team designs sensors for unique requirements and aggressive cost targets. Typical specialized requirements include small sizes, high temperature, low capacities, “Cenelec” dielectric, and overload proof sensors.
|
|
| ... products without technical information |
| |
Stop Time Measuring Instrument for safety measurements at power driven machines such as presses, shears and robots. The system is used to calculate the distance of the safety device. (2-hand control, light curtain ..)
Portable and solid equipment, built-in matrix printer
Free adjustable stop point
Standstill detection down to v < 1 mm/s
Measurement of maximum velocity
Measurement of velocity at stop point
ISO9000 calibration certificate
Traceability of measurement values
RS-232 interface for PC connection
Fast set-up time
Actuator to release no-touch safety equipment as option
|
|
The Safety and Motion Analyser Tool (Smart) is designed to enable key Safety Critical machine parameters to be easily checked.
Smart has many valuable features for stopping time measurement:
- Graphical result - a "fingerprint of the movement"
- Calculates minimum allowed safety distance
- Easy to analyse stopping characteristics and movement
- Shows how the stop distance can be optimised
|
|
|
|
|
|
ALMEMO® 2490-1L compact measuring instrument with more than 65 measuring ranges, with just one input, with memory for 100 measured values
ALMEMO® 2490-2L with 2 measuring inputs
Universal measuring instrument with 1 or 2 ALMEMO® input sockets, 8 channels, 4 internal function channels (e.g. differential values)
Memory sufficient for 100 measured values, can be called up and viewed in the display
High-resolution A/D converter, 16-bit, 10 mops
More than 65 standard measuring ranges
Support for ALMEMO® connectors with multi-point calibration, special linearization, and special measuring ranges
Generously dimensioned 2-row static 7 / 16 segment display including units
Easy and convenient to operate by means of 7 keys
Measuring functions : Measured value, zero-setting, sensor adjustment, saving of maximum / minimum values, memory for 100 measured values, cold junction compensation, and temperature compensation
Test functions : Segment monitoring, range monitoring, sensor breakage indication, battery voltage check and display
|
|
Clamping systems for measure machines as building set
The component fixing is especially critical in the measure technique. You must guarantee that the component is fixed on a measure machine without any bracing. Otherwise the measure results would be adulterated and this may have serious consequences.
The flexibility of the clamping systems is also very important. A remodelling must be fast and uncomplicated. This is an ideal territory for the clamping system “Spannfix” from THOME PRÄZISION.
A wide modular system affords the fast prepare and accommodate of devices. All parts are produced with high-class and hard anodised aluminium. In addition to a saving of time can be reached a saving of costs because of measure results and flexibility of the system.
Flexible, tough and easy. Our clamping system also solves your clamp jobs fast and faithful.
|
|
SecureLinx -Surge Protection for Security Products
Premiere Surge Protection for all your Security, CCTV, Access Control and Alarm applications
|
|
Weidmüller develops, produces and sells high-quality overvoltage protection and has established this field as its core line of business over the years. Our objective is always first and foremost to fulfil our customers’ application requirements. With our know-how, we have developed a programme which combines reliable overvoltage protection with affordable solutions: in low-voltage power supplies, I&C technology, telecommunication and industrial data processing.
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
