|
|
BW Technologies by Honeywell announces the arrival of the latest portable multi-gas solution – the GasAlertMax XT. Simultaneously monitoring for hydrogen sulfide (H2S) carbon monoxide (CO), oxygen (O2) and combustibles (%LEL), the GasAlertMax XT features a non-intrusive integrated sampling pump and SmartSample diaphragm pump technology. By offering one-button operation, the GasAlertMax XT provides ease of use and simple compliance to industry safety standards. Tamper-proof, user adjustable options enable the instrument to be customized to suit your specific application.
The GasAlertMax XT is ideally suited to a range of applications and customers including confined space entry, oil and gas, marine and shipping, utilities, wastewater treatment plants, power generation and municipal needs.
Powered by rechargeable batteries that provide enough power for an entire 13 hour shift, the compact GasAlertMax XT comes with standard event logging and datalogging. Calibration is simple with an automatic procedure. The GasAlertMax XT is compatible with the BW MicroDock II automatic test and calibration system. Multi-language support is available in English, French, German, Spanish and Portuguese.
For more information on the GasAlertMax XT, visit www.gasmonitors.com.
|
|
Compact Multi-gas Detector for H2S, CO, O2, Combustibles
The QRAE II is a full-featured, compact, one- to four-sensor gas detector for detection of combustibles, oxygen, hydrogen sulfide, and carbon monoxide. Key features include easy-to-change, externally accessed battery packs (available in rechargeable and alkaline versions), a water-resistant case and a new state-of-the-art O2 sensor technology with extended life.
Key features include:
Patented SPE O2? Oxygen sensor
Best EMI/RFI immunity technology for products in its class, eliminating radio interference
Easy access to sensors, filter and battery compartment without exposing electronic components to potential damage
Big graphic display for easy overview of gas type and concentration
Alkaline adapter and Lithium-ion battery pack
Rugged housing withstands harsh environments
|
|
|
FirstCheck is the very first multi-gas to combine complete VOC and toxic gas detection from 1 ppb up to 10,000 ppm with traditional multi-gas sensors for oxygen, hydrogen sulfied, carbon monoxide and explosive gas detection.
|
|
The MultiRAE Plus combines a PID (Photoionization Detector) with the standard four gases of a confined space monitor (O2, LEL, and two toxic gas sensors) in one compact monitor with sampling pump. The MultiRAE Plus gets the job done in more circumstances than any other gas detector. The MultiRAE Plus is quickly and easily changed from a sophisticated technician instrument to a simple text-only monitor. The same monitor can be used as a personal monitor, a hand-held sniffer, or as a continuous operational area monitor.
The MultiRAE Plus detector can be made wireless with the use of RAELink. This allows real-time monitoring information from the detector to be integrated into an existing AreaRAE system. A wireless, RF (radio frequency) modem allows detectors to communicate and transmit readings and other information on a real-time basis with a remotely located AreaRAE base controller up to two miles away.
This product has ATEX approval.
|
|
The SafeLog 100 datalogging single gas monitor is designed for today’s demanding work environments.
It is rugged, lightweight, and features a large four digit display with backlighting and pulsating warning horn and visual alarms.
The SafeLog 100 is protected in an impact resistant ABS housing to take the punishments of real life work conditions.
The unit is powered by a user replaceable 9 volt battery that will supply 100 hours of continuous operation.
User flexibility is as simple as selecting from ten different interchangeable electrochemical sensors. The SafeLog 100 measures gas concentration at one sample per second. With an extended memory capacity, it datalogs 60 plus hours (continuous or multiple sessions) of 1 minute historical data.
|
|
The ppbRAE 3000 is the most advanced handheld volatile organic compound (VOC) on the market. Its Photoionization Detector’s (PID) extended range of 1 ppb to 10,000 ppm makes it an ideal instrument for applications from HazMat/Homeland Security, industrial hygiene, to Indoor Air Quality and military applications.
The patented sensor provides the following unique features:
- a 3-second response time
- extended range up to 10,000 ppm with improved linearity
- humidity compensation with inbuilt humidity and Temperature sensors
Key Features
- Proven PID technology
- Real-time wireless data transmission with built-in RF modem or
Bluetooth.
- Design for service Easy access to lamp and sensor in seconds without tools.
- Big Graphic display for easy overview of gas type, Correction Factor and concentration.
- Field interchangeable battery pack in second’s without tools.
- Integrated Flash Light for better view in dark conditions
- User friendly screens including plot view chart view
- Built-in full RAE Systems 350 compounds correction factors list measure more chemicals than any other PID
- Multilanguage support with 10 languages encoded
- Rugged housing withstands use in harsh environments
- IP67 Waterproof design for easy cleaning and decontamination in water
- Strong protective removable Rubber Boot.
|
|
2020ppbPRO, stable, linear, and rugged hand-held portable photoionization detector, is equipped standard with a new high performance 10.6 eV lamp, and has an optional 11.7 eV lamp for ionizing chlorinated compounds. The UV lamp is easy to remove and has a new lamp condition assessment indicator for cleaning or replacement.
Textured grip and large keys make the 2020ppbPRO easy to carry and use, even while wearing triple-layer gloves. The large 8-line backlit display is easy to read with large fonts. Flexible operation to meet monitoring requirements User selectable interval time (1 to 900 seconds) Display readings in ppb, ppm, or mg/M3.
2020ppbPRO is Intrinsically Safe to North American and ATEX standards for use in potentially explosive environments. Expanded internal datalogging for up to 200 hours of 1 minute interval sampling points. Zero calibration through the use of an activated charcoal multi-use pre-filter tube by Dräger. Dedicated calibration key.
|
|
Most Reliable Handheld VOC Monitor
The MiniRAE Lite is the most reliable handheld volatile organic compound (VOC) monitor on the market. Its photoionization detector’s (PID) range of 0 to 5,000 ppm makes it an ideal instrument for applications ranging from environmental to construction.
Proven PID technology
The patented sensor provides the following unique features:
- 3-second response time
- range up to 5,000 ppm
- humidity compensation
Designed for service - Easy access to lamp and sensor in seconds without tools
• Big graphic display for easy overview of concentration
• Field-interchangeable battery pack, replacable in seconds without tools
• Integrated flashlight for better visibility in low light
• Multi-language support with 12 languages encoded
• Rugged housing withstands use in harsh environments
IP-65 design
Strong, protective removable rubber boot.
|
|
The MiniRAE 3000 is the most advanced handheld volatile organic compound (VOC) on the market. Its Photoionization Detector’s (PID) extended range of 0 to 15,000 ppm makes it an ideal instrument for applications from industrial hygiene, to leak and hazmat detection..
The patented sensor provides the following unique features:
- a 3-second response time
- extended range up to 15,000 ppm with improved linearity
- humidity compensation with inbuilt humidity and Temperature sensors
Key Features
- Proven PID technology
- Real-time wireless data transmission with built-in RF modem or Bluetooth.
- Design for service: Easy access to lamp and sensor in seconds without tools.
- Big Graphic display for easy overview of gas type, Correction Factor and concentration.
- Field interchangeable battery pack in second’s without tools.
- Integrated Flash Light for better view in dark conditions
- User friendly screens including plot view chart view
- Built-in full RAE Systems 350 compounds correction factors list measure more chemicals than any other PID
- Multilanguage support with 10 languages encoded
- Rugged housing withstands use in harsh environments
- IP67 Waterproof design for easy cleaning and decontamination in water
- Strong protective removable Rubber Boot.
|
|
Detects up to 50,000 PPM VOCs, including methane, in fugitive emissions or environmental applications. At just 8.1 lb, the MicroFID is the smallest and lightest data logging Flame Ionization Detector (FID) available. One tutor key prompts you through basic operations. Critical data is displayed and logged in less than 3 sec within the concentration range of 0.1-50,000 PPM. A simple two-step calibration holds for a full workday. The MicroFID ergonomic design includes a built-in handle and a rubberized keypad that can be used while wearing protective equipment. Replaceable and rechargeable battery packs operate for as long as 15 hours. The MicroFID is classified as Intrinsically Safe for both North America and Europe .
For trouble-free measurement of soil gases where the response factor consistency of an FID is mandatory, or where methane must be included in the total reading, the MicroFID has no equal.
|
|
The Argweld® Titanium Purge Monitor has been specifically designed for indicating oxygen levels in Argon gas for weld purging.
It is believed to be the worlds first purpose designed and built Titanium Weld Purge Monitor.
It measures and clearly indicates actual oxygen levels in parts per million (or percent) down to 10 parts per million, (0.001%), on an alpha-numeric display.
The unit is menu driven by four buttons on the front panel and has an internal alarm with high and low oxygen levels which can be set on the front panel.
A unique new low cost sensor is used which has very little maintenance requirement and tests have shown that is should have up to a five year life.
An optional software package is available to allow a computer to be used to store and print results and graphs etc for quality control purposes.
Titanium Purge Monitor Features:
Small, light, portable and inexpensive.
Automatic fault finding diagnostics.
Measures and indicates down to 10 ppm (0.001%)
Unique fast response sensor with expected 5 year life.
Optional PurgeLog 2000 Software for data acquisition.
Specifically developed for weld purging of titanium.
Low repair, refurbishment and recalibration costs.
Operation with any welding equipment as well as orbital welding equipment and welding enclosures.
Ideal for welding stainless steel in ultra clean applications.
Internal Alarm and security pin code facilities.
Push Button operated menu.
No pump needed and no moving parts to go wrong.
Weld Start/Stop Facility.
|
|
The Argweld® Weld Purge Monitor.
Keeps waiting time to a minimum:
The monitor can tell the operator exactly when the oxygen level is low enough to commence welding. No estimating or guesswork is involved, so no time is wasted waiting for the correct level to be reached.
Measures the content of oxygen in the purge gas to indicate when it is safe to carry out a weld.
Saves on excessive use of inert gas:
The exact oxygen content is given, so no more inert gas than necessary has to be used to ensure that the weld will be free of oxidation.
Prevents weld failures:
Premature starts on welds are avoided, high quality is ensured.
Highly portable:
Its small size makes is easy and very convenient to use in all purging situations.
Titanium / Duplex / Stainess Steel:
The MKV monitor can be used to weld Titanium, Duplex and Stainless Steels.
Low cost:
The monitor is available at low relative cost and is a perfect accessory for use with any pipe purging system or argon welding enclosure.
Continuous monitoring of oxygen levels:
A continuous read out of the oxygen level is given, even when welding is taking place. This can avoid unforeseen purge problems that could cause quality failures after the weld has been started.
Calibration and Certification:
Our instrument is supplied calibrated and certificates for Industry Standards are included. Re-calibration is available to operators at any time. Continuous calibration on the front of the instrument is provided.
Extra range:
The MKV monitor indicates Oxygen levels down to 100 parts per million (PPM) 0.01% and measures accurately down to 0.1%.
|
|
AreaRAE Steel is the first ATEX certificated Wireless Monitor in Europe with up to 5 simultaneous gas sensors including Toxic Industrial Chemicals. It runs licence-free communication and RAE Systems can show over 2.500 installed base.
The AreaRAE Steel is housed in a welded stainless-steel enclosure, it is rugged, portable and weather-resistant, making it suitable for harsh environments. Ideal for hazardous materials and other emergency response monitoring applications, strategically placed AreaRAE Steel monitors can be used to quickly establish a perimeter, allowing first responders to back off to a safe position and monitor readings from up to 3 kilometers away.
The photoionization detector (PID) in the AreaRAE Steel can measure parts per million of volatile organic compounds (VOCs). In addition, it can be equipped with a lower explosive limit (LEL) sensor, an oxygen sensor, and one or two electrochemical toxic sensors for measuring specific substances such as hydrogen sulfide or chlorine.
An integrated wireless modem transmits real-time gas measurement data to a base station, which employs a standard Windows-based PC running ProRAE Remote software.
Key Features
- Up to five sensors (PID, LEL, O2 and two electrochemical toxic gas)
- Loud buzzer and large, extra-bright warning light
- Large LCD display and keypad
- Rugged, weather-resistant stainless-steel housing
- Built-in sampling pump
- Interchangeable Li-ion or alkaline battery pack
- Continuous operation via AC source
Applications
- HazMat and Emergency Response
- Refineries and Petrochemical Plants
- Power Plants
- Pulp and Paper Industry
- Marine and Offshore Wells
|
|
LumaSense offers the maket quality photoacoustic-based gas monitoring solutions. The Photoacoustic Multi-gas Monitor 1314 is a highly accurate, reliable and stable quantitative gas monitor. Its measurement principle is based on the photoacoustic infra-red detection method. This means that the 1314 can measure almost any gas which absorbs infra-red light.
Selectivity is achieved through the use of optical filters. By installing up to 5 optical filters in the 1314, it can measure the concentration of up to 5 component gases and water vapor in any air sample. Detection limit is gas-dependent, but is typically in the ppb region. The accuracy of measurements is ensured by the 1314's ability to compensate for temperature and pressure fluctuations, water-vapor interference and interference from other gases known to be present (Cross-compensation). Reliability of measurement results is ensured by regular, automatic self-tests.
|
|
The Aries roaming air monitoring system is ideal for industrial hygiene applications including use in clean rooms, plant floors, and office areas. Designed for in-situ monitoring of ambient air, this complete, turnkey system includes:
- integrated cart, notebook data system, and 12 volt battery all designed to be wheeled from location to location
- 80 meter pathlength gas cell and powerful AutoQuant quantitative analysis software for low level detection of ambient gases
|
|
Combining state of the art sensing technology with a sleek design the IAQPoint accurately measures CO2, temperature and humidity levels and ensures the right amount of fresh air is supplied to all parts of a building where people are present.
With its BACnet, LON, Modbus and FLN digital output capabilities, the IAQPoint is simple to install and integrates easily into existing Building Automation Systems.
By simultaneously monitoring three parameters in one unit ; CO2, temperature and humidity , the IAQPoint dramatically lowers the overall installation cost by reducing the amount of required wiring and use of a simple snap-fit mounting kit.
|
|
GfG is a world leader for gas detection and measurement technology. For over 40 years GfG has specialized in designing, developing and producing the safest and most reliable equipment and sensors available.
GfG offers an extensive range of portable monitors and fixed systems. The product range includes sensors, the world´s smallest gas monitors, micro-processor controlled multi-gas detectors and computer aided system solutions. GfG provides diverse solutios for Toxic, Explosive and Oxygen gas detection in air and water.
GfG equipement is used in a variety of applications and industries including automotive, chemical industries, landfills, steel industries, hospitals, mining, public utilities, food processing, research institutes, universities and wherever the protection of life and property is needed.
|
|
The Tocsin 900 provides ultimate system flexibility for larger gas detection systems up to 255 detectors in size. The Tocsin 900 control panel is compatible with the Tocsin 102A and 103A range of Toxic, Flammable and Oxygen detectors. To compliment the system a range of accessories, calibration sets and audio visual alarms and addressable outputs are available. Full control through the system software is available to group, zone or vote detectors. Detectors can be calibrated and interrogated from the control panel. Assign tags to sensors and set rising, falling, latching or non-latching alarms. Eight RS485 ports allow configuration of eight single ended cable runs of up to 32 sensors or four double ended loops for greater cabling integrity.
Features
24V DC or 110/230V AC Options
Control up to 255 detectors
Digital Addressable Detectors
User configurable alarms
Add extra alarm relay outputs
RS485 I/O
On Board event logging
Download event memory and panel set up to PC
|
|
GfG is a world leader for gas detection and measurement technology. For over 40 years GfG has specialized in designing, developing and producing the safest and most reliable equipment and sensors available.
GfG offers an extensive range of portable monitors and fixed systems. The product range includes sensors, the world´s smallest gas monitors, micro-processor controlled multi-gas detectors and computer aided system solutions. GfG provides diverse solutios for Toxic, Explosive and Oxygen gas detection in air and water.
GfG equipement is used in a variety of applications and industries including automotive, chemical industries, landfills, steel industries, hospitals, mining, public utilities, food processing, research institutes, universities and wherever the protection of life and property is needed.
|
|
The Tocsin 900 provides ultimate system flexibility for larger gas detection systems up to 255 detectors in size. The Tocsin 900 control panel is compatible with the Tocsin 102A and 103A range of Toxic, Flammable and Oxygen detectors. To compliment the system a range of accessories, calibration sets and audio visual alarms and addressable outputs are available. Full control through the system software is available to group, zone or vote detectors. Detectors can be calibrated and interrogated from the control panel. Assign tags to sensors and set rising, falling, latching or non-latching alarms. Eight RS485 ports allow configuration of eight single ended cable runs of up to 32 sensors or four double ended loops for greater cabling integrity.
Features
24V DC or 110/230V AC Options
Control up to 255 detectors
Digital Addressable Detectors
User configurable alarms
Add extra alarm relay outputs
RS485 I/O
On Board event logging
Download event memory and panel set up to PC
|
|
|
Dräger's line of single-gas measurement products keep you aware of one specifc gas's concentration consistently and reliably. The versatility of these products allow you to configure the product to meet your application needs.
|
|
|
The need to continuously and simultaneously measure the concentration of several gases arises frequently in industrial and community applications. For these kinds of measurements, GfG offers a complete product line to provide our customers with custom solutions.
|
|
|
Biosystems, LLC, a Bacou-Dalloz® Company, is a leading supplier of gas detectors, respiratory maintenance equipment and monitoring systems, worldwide. Founded in 1981, Biosystems is headquartered in Middletown, Connecticut.
|
|
Gas detectors E2606 are intended for air quality monitoring - control of combustible or toxic gas and oxygen concentration and prevention of gas leaks in confined spaces.
Depending on version the gas detector E2606 uses either advanced metal-oxide semiconductor or an electrochemical gas sensor. Concentration of combustible (methane, butane,hydrogen, etc) or toxic (carbon monoxide, VOC, freons, ammonia,H2S etc) gases or oxygen deficiency can be measured.
- Measuring range 0..1 %vol
- Temperature range -20..+50 °C, 5...95 %RH
- Output relay 230V, 2A
- Supply 230 VAC or 24 VDC
- Alarm setpoint 0,2 %vol
- Diffusion, flow-through and remote sensor versions
- Visual and audible alarms, adjustable output relay
- Linearized analog output 4-20 mA
- RS485 Modbus RTU interface option for direct Fieldbus networking
- Wall-mount
|
|
The OPASTOP® GP 2001 H is particularly adapted to the following applications:
• Continuous monitoring of dust emission concentration.
• Monitoring of filtration system emissions.
• Monitoring of flue gas opacity for maximum burner combustion.
A cone of light transmitted by fibre optic cable from a light source is shone into the measuring area from the scanner head. A fibre optic receiving cable transmits the reflected light from the suspended particles to a
photosensitive cell.
Four generations of equipment with over 30 years experience in the field
have given the GP 2001 H the following advantages:
• Reflection type measuring system, in-situ, giving:
• The best available sensitivity to low dust levels.
• Rapid response time.
• A single scanner head, completely separate from the electronics panel, giving :
• Easy to fit assembly.
• No scanner alignment required.
• High tolerance to temperature and vibration.
• Large back-lit interactive LCD screen, showing clear instructions
making it easy to understanding and use.
• Modulated light source eliminating parasitic light reflection.
• Modular design, enables easy maintenance and parts replacement.
• Automatic scale switch-over from low to high dust content enables a permanent reading of the measured value.
• Scanner head fits in place of all the preceding generations of OPASTOP® can replace all versions of GP 1000 H / GP 2000 H OPASTOP® scanner heads without modification.
|
|
|
HazardWatch is a modular Fire and Gas Detection System built using state-of-the-art industrial automation/control equipment to perform the requirements of an integrated Fire and Gas Detection System certified by Factory Mutual to be compliant to NFPA 72 (2002).
|
|
| ... products without technical information |
| |
|
