|
|
GfG is a world leader for gas detection and measurement technology. For over 40 years GfG has specialized in designing, developing and producing the safest and most reliable equipment and sensors available.
GfG offers an extensive range of portable monitors and fixed systems. The product range includes sensors, the world´s smallest gas monitors, micro-processor controlled multi-gas detectors and computer aided system solutions. GfG provides diverse solutios for Toxic, Explosive and Oxygen gas detection in air and water.
GfG equipement is used in a variety of applications and industries including automotive, chemical industries, landfills, steel industries, hospitals, mining, public utilities, food processing, research institutes, universities and wherever the protection of life and property is needed.
|
|
ENOTEC, as one of the world’s leading suppliers of flue gas measuring and analyser systems, is your competent partner for complete emission and process analyser systems ranging from a single probe, from our own production, to an individually designed system using our own analysers together with O.E.M. products, through to turnkey emission and process projects.
Process and emission measuring systems from ENOTEC are used worldwide in refuse incineration, crematoria, power-generation, and all kinds of other industrial combustion and process engineering.
For each task ENOTEC develops individual concepts from the sampling and treatment of measuring gas up to the analysing/measuring unit and the logging/recording. ENOTEC co-operates with all qualified blue-chip suppliers of analysers and selects for each case the instruments, which are optimal in performance and value.
|
|
|
We use ours and other brands analyzers for CO-NOx-SO2-NH3-CO2-O2-DUST-TOC. Fast loop up to 5 points of emission with single set of analyzers make possible to execute measures with high level sensors and low costs. All the equipment communicate with the acquisition data PC with various communication industrial protocols. The systems are equipped with full diagnostic for monitoring the correct operations of all the components and for the environmental conditions.
|
|
|
|
|
|
Gasmonitor Plus is just one of Crowcon’s control panel range. This flexible, rack based, microprocessor-controlled unit is used throughout the world, both onshore and offshore. Gasmonitor Plus provides the cost-effective solution to your system requirements.
Features:
Simple to Use
• All the day to day functions are available from the front panel
• The unique bar graph display per channel provides an instant representation of gas concentrations
• Common alarm LEDs on the display card mean that the whole rack status can be checked at a glance.
Flexible Architecture
• System is limitlessly expandable
• System customisation is achievable with minimal wiring
• Designed to industrial standards, Gasmonitor Plus will integrate fully with existing rack mounted protection systems on site
• Optional relay modules can be used to provide up to a total of 84 output relays per rack.
• Sixteen of these relays can be voted to activate from a combination of the three levels of alarm per channel
Other controllers in our fixed gas monitoring range include:
Vortex 1 to 12 channel control system
Gasmaster 1 to 4 channel control system
Gasflag Single channel control system
CellarSafe CO2 monitoring system
Ditech modular gas and fire detection and extinguishant control system
|
|
|
MSA offers a complete range of safety related modular control systems, for all system sizes and applications, designed to process the input signals of gas detectors and other devices. In alarm conditions appropriate actions are triggered by the controller.
|
|
|
|
|
|
World leader in stack gas monitoring systems for more than 40 years and pioneer in FTIR technology, ABB Analytical is offering an inexpensive and forward-looking system with the ACF-NT (former Advance Cemas FTIR) multi-component emission and process monitoring system.
Continuous, quantitative and selective measurement of HCl, HF, H2O, CO, CO2, SO2, NOX, NH3, N2O, O2, TOC and NMHC (other gases on request)
Maximum 12 measuring components (standard), simple upgrade on request
Proven hot wet extractive measurement technique
High stability, accuracy and reliability through proven FTIR technology
Fully integrated TOC and O2 analyzer modules (optional) according European Standard EN12619
Unique air-driven injector pump, no moving parts, low condensate to handle
Low ownership, maintenance and installation cost through multi-component measurement technology with only one sampling system
Complete pre-engineered system, modest space requirement, compact and modular system design
Clear-text status messages and user-friendly operator interface on a large back-lit display
Measured value and status signal transmission via analog and digital outputs and via Modbus or Profibus
Remote control and remote maintenance via Ethernet or modem
Integration and display of signals from other detectors (e.g. dust, mercury, flow, pressure, temperature)
|
|
|
|
|
|
Gasmet™ CEMS is used for continuous emissions monitoring in waste incinerators and cement plants. In addition, various process monitoring applications are also possible. Typically, concentrations of H2O, CO2, CO, SO2, NO, NO2, N2O, HCl, HF, NH3, O2 and TOC (Total Organic Carbon) are continuously measured with the Gasmet™ CEMS. The Gasmet™ CEMS has been also certified by TÜV (17th BlmSchV) and MCERTS. It also fulfills the requirements of QAL 1 according to EN 14181 and EN ISO 14956.
Overview
Gasmet™ CEMS is a modular construction that typically comprises of Gasmet™ CX4000 FTIR gas analyzer, heated sampling unit, industrial PC and a ZrO2 – oxygen analyzer which are installed in an air-conditioned cabin. All modules are 19’’ rack mounted in pull-out shelves for easy accessibility & service. Gasmet™ CX4000 FTIR gas analyzer can also be equipped with a TDL (Tunable Diode Laser) O2 - measurement module.
Key Advantages
- Low need for maintenance
- No span calibrations required (automated span checks possible)
- Hot-extractive-sampling; no sample loss or change of composition
- Capability to water soluble compounds like HCl, HF, NH3, etc.
- TOC (Total Organic Carbon) measured with FTIR – no need for a separated FID
- Fully automated measurement system with comprehensive safety functions
- Ready for future requirements - new compounds can be added without any hardware changes
- Fully modular system built to customer specification
|
|
|
|
|
|
Gasmet™ In-Situ analyser consists of a sample cell inserted into the stack or duct, heated steel mounting flange and the rugged GICCOR™ interferometer unit in an IP65 enclosure that is directly attached to the flange.
Gasmet™ In-Situ offers a cost-effective alternative for extractive systems in continuous emissions & process monitoring where multiple compounds are monitored. Typically, concentrations of H2O, CO2, CO, NO, NO2, N2O, SO2, HCl, HF, NH3, CH4 are continuously monitored with a single Gasmet™ In-Situ. In addition, different VOC’s can be measured as individual compounds. There is no need for any span calibrations; only zero calibration with instrument air every 24 hours. Measurement results can be transmitted with analog 4 – 20 mA signals or with a digital protocol (MODBUS, PROFIBUS etc.).
By combining powerful FTIR technology with rugged in-stack measurement cell, the Gasmet™ In-Situ offers increased analytical capability and reduced cross-interference effects when compared with other types of in-situ analysers.
|
|
|
|
|
|
The Tekran® Series 3300 Mercury Continuous Emissions Monitoring System (CEMS) represents the only system proven for both accuracy and reliability.
Building on over twelve years of experience in mercury measurement , Tekran has leapt to the forefront of the Mercury CEMS industry, leveraging its experience with cold vapor atomic fluorescence and pure gold preconcentration. In reliability, system availability and analytical accuracy, Tekran's CEM systems have outperformed all competitors in EPA and private tests in wet and dry stacks.
Series 3300
Key Features
- Construction materials selection is based on years of experimentation and the ability to withstand harsh stack gas conditions.
- Patented technology separates mercury into elemental and ionic species, while removing interfering acid gases without the use of chemical reagents or solid sorbents.
- The system provides real-time feedback to optimize your mercury reduction technologies.
- Minimum detectable limit for total mercury of less than 0.05 ug/m3, with rapid response time to changes in concentration.
- Insensitive to the presence of SO2, NOX, CO, HCl and all other common combustion by-products.
- Unaffected by particulate in sample stream.
- Low-cost Calibration eliminates the need for expensive mercury calibration gas cylinders.
- No chemical reagents required.
|
|
LAND has a range of stack gas emissions analysers suitable for measuring a wide range of pollutant gases. These analysers are for stack emissions monitoring of CO, O2, NO, NO2, NOx, SO2, SO3 & CO2 in flue gas.
These gas analysers can operate stand-alone or form part of an automated measurement system (AMS) or continuous emissions monitoring system (CEM).
|
|
REGARD is a state-of-the-art microprocessor-driven, modular gas monitoring system.
Each card is fully configurable for all types of transmitters and gases, using the on-board push buttons. The gas concentration is displayed on a LED display and status LED’s allow a quick overview on the condition of the system.
|
|
|
|
|
|
Product Overview
As a turn-key CEMS supplier, Horiba accepts total responsibility to ensure that our systems meet all customer and compliance requirements. Horiba offers more than 50 standard versions of the ENDA-4000 series. Each system features an XS analyzer or an XE analyzer, as well as a sample conditioning system. Either analyzer can be combined with a standard sampling system, a flow monitor, and an opacity monitor to provide a flexible, powerful, and totally cost-effective integrated system.
The field-proven sample conditioning system uses a two-stage sample drying technique to deliver clean, dry sample into the analyzers, thus ensuring accurate measurements with minimum loss of gases to be measured. All systems include automatic calibration, calibration gas injected at the probes, and a sample line temperature controller installed in the cabinet. Probe blowback capability is optional.
Product Features
Measurement up to five gases.
No optical alignment required.
No routine maintenance required.
Highly reliable with technology proven in thousands of installations.
Manufactured under strict ISO 9001 certification.
|
|
|
|
|
|
The DirectSense Ultra-Mini PC based advanced environmental monitors include USB enabled multi-sensor probes and a Mobile PC platform.
Measure ppb range volatile organic compounds (VOCs), Carbon Dioxide, CO, °C/°F, %RH and an additional specific gas for IAQ applications with a single probe. Alternative probes allow you to simultaneously measure up to 5 specific toxic gases (H2S, O3, NH3, SO2, NO2; choose from 21 specific gas sensors) and/or ppm range VOCs, air velocity, differential pressure, particle concentration and other parameters.
The new Fujitsu Ultra-Mini Vista OS mobile PC sports a swiveling, touch screen and easy-to-use keyboard. A built-in camera is great for photos (or panoramic videos) that attach to data files on-site. It's easy to carry (in-hand or in shoulder pouch) for spot-checking and spot-logging, yet it fits easily into GrayWolf's hard-shell security case for unattended trend logging.
Plug in any of GrayWolf's USB enabled DirectSense probes and you have a very powerful monitor, with features not available from any other instrument:
•On-board video help
•On-board sensor info (basic sensor care, cross-interferences, etc)
•On-board parameter details (typical sources, typical background levels, government guidelines, etc)
•On-board application related documents
•In-situ text notation
•In-situ audio notation and much more
Measurements collected in the field can be analyzed, and reports on the data and field collected note with the included WolfSense® PC software. Create tables and histograms comparing measurements from various locations in seconds. Even automate the entire reporting process with GrayWolf's optional Advancaed Report Generator software.
|
|
|
|
|
|
The New DUSTTRAK™ II and DRX Aerosol Monitors
The Revolution in Real-Time Dust Monitoring Has Arrived: Forget everything you knew about aerosol monitors. The new DUSTTRAK II and DRX monitors are light years ahead of any other. The DUSTTRAK™ DRX monitor, for instance, is a new laser photometer that simultaneously measures both
mass and size fraction – something no other monitor can do. When it comes to worker comfort and productivity, as well as risk management, don’t you want the best? The new DUSTTRAK II and DRX aerosol monitors simply leave everyone else in the dust.
These new DUSTTRAK DRX laser photometers simultaneously measure mass and size fraction – something no other monitor can do. Both the desktop and handheld monitors are continuous real-time 90° light-scattering laser photometers that simultaneously measure size-segregated mass fraction concentrations corresponding to PM1, PM2.5, Respirable, PM10, and Total PM size fractions. They combine both particle cloud (total area of scattered light) and single particle detection to achieve mass fraction measurements.
Real-Time Dust Monitoring Takes A Giant Leap Forward.
|
|
|
Kanomax portable dust monitors are optimal tools for real-time monitoring of worker exposure to airborne contaminants, such as dust, smoke, fume, and mist. They measure particle concentrations of PM 10 and PM 2.5. The Piezobalance Dust Monitor Model 3521 is a unique respirable aerosol monitor, providing direct mass concentration of particulates using Piezobalance technology.
|
|
|
Kanomax portable dust monitors are optimal tools for real-time monitoring of worker exposure to airborne contaminants, such as dust, smoke, fume, and mist. They measure particle concentrations of PM 10 and PM 2.5. Digital Aerosol Monitor Models 3431 is compact, respirable aerosol monitor which utilizes the light scattering method to convert dust count into mass concentration.
|
|
| ... products without technical information |
| |
Power test systems are made for single-phase and three-phase power quality testing applications. Record and analyze power at any base frequency from milliHertz to 800 Hz, and still add any of the unique DEWETRON capabilities - video, GPS, additional analog sensors, etc. POWER QUALITY is as an add-on to just about any DEWETRON system, so please look at any of our multifunction systems as a platform.
|
|
Features:
- Mixture Viscosity
- Tool Condition
- Optimum Feed Rate
- Pump or Fan Flow
- Beginning or End Process
- Obstructions
- Overloads
- Loss of Load
|
|
Patented Autophase technology actually corrects common wiring errors. Analog and network models available. Click on the appropriate series to see details below...
...or select data sheets in PDF format from this list.
The AutoPhase Advantage
AutoPhase makes power transducer installation simple.
There are over 40 ways to wire up a 3 phase, 4 wire kW transducer. For example, reversing the orientation of a CT flips the output waveform, tricking ordinary watt transducers into thinking there is a 180 degree phase shift. Or if CT and voltage inputs are mismatched, the transducer thinks there is a 120 degree phase shift. Either way, you have a problem.
AutoPhase identifies the phases and polarity automatically and corrects for the error in software. This eliminates flashing "ERROR" lights, tedious and dangerous reconnecting of inputs. AutoPhase even tells you which CTs are reversed and which phases are mismatched!
|
|
Terasaki offers a cost effective solution for the measurement ofthe main
electrical parameters in electrical distribution networks.
The selection of the parameters to be measured can be easily visualised with the help of a clear and concise LED display.
Simple to set up with programmable CT. ratio from the front of the meter-Available in panel mounted and DIN rail mounted versions.
The fourth display allows simultaneous reading of two different parameters
Monitors the cubicle temperature
TheTEMM range offers a comprehensive selection of multifunction
meters to suit any application.
|
|
MV substation control unit
Description
Easergy T200I integrates within a single unit, all functions to remote control an MV substation:
Management of 1 to 16 switchgear/circuit breaker
Uninterruptible power supply 24 or 48 Vcc
Fault passage indicator
Current measurements
MV network reconfiguration automation functions
Local display and control
Large catolog of protocols:IEC 870-5-101 and 104, DNP3, Modbus and various customer owned protocols
Various transmission systems: Ethernet, RS232, Radio, PSTN, GSM, GPRS, private line...
|
|
| ... products without technical information |
| |
|
|