|
|
The MicroDock II is the world’s most advanced, compact and affordable automatic calibration, testing and data management system for portable gas detection equipment. Compatible with BW’s GasAlertMicro 5, GasAlertMicro 5 PID, GasAlertMicro, GasAlertMicroClip, GasAlert Extreme and GasAlertClip Extreme family, the MicroDock II is expandable to up to 10 docking modules (including up to 6 charging units).
- Fully automatic “hands-free” calibration & functional bump test
- Automatically verifies performance of audible and visual alarms
- No computer required
- Entirely self-contained
- Fully portable
- Lightweight and mobile
- Operates via line power or a set of four C-cell batteries
- Add additional self-contained docking modules to system via simple, plug-in connections-no external pressure transducers or gas lines necessary
- Simplify record keeping
-Verify proper performance
- Reduce maintenance costs
- Multiple MicroDock II systems can be connected via a LAN
- Multi-language support in English, French, German, Spanish, and Portuguese |
|
The DS2 Docking Station provides the ultimate flexibility for managing your gas monitors wherever you use them. The DS2 gives you all of the benefits of consistent automated calibration, record keeping, battery recharging and instrument diagnostics for your monitors to limit your liabilities and safety hazards. Two way wireless and/or ethernet connectivity enables you to link up to 100 stand-alone Instrument Docking Stations (IDSs) from remote locations anywhere in your facility and relay the data back to one central database for total instrument management. A graphical user interface tool (DSSAC) allows an administrator to view operations on each Docking Station from a network computer, making it easy to track instruments, print reports, set events and change parameters for any location.
|
|
| ... products without technical information |
| |
| The 100 to 200 CFM unit is our smallest conditioner and is conveniently designed to run on a 15 amp 115 volt power source. This unit does not require compressed air or ultra pure water (tap water is generally fine). The interior and exterior are constructed of corrosion-resistant stainless steel. Low watt density heaters also contribute to the unit's durability. |
|
| ... products without technical information |
| |
| ... products without technical information |
| |
| The 100 to 200 CFM unit is our smallest conditioner and is conveniently designed to run on a 15 amp 115 volt power source. This unit does not require compressed air or ultra pure water (tap water is generally fine). The interior and exterior are constructed of corrosion-resistant stainless steel. Low watt density heaters also contribute to the unit's durability. |
|
The WinTest® DMA application software meets the challenges of Dynamic Mechanical Analysis (DMA). When coupled with special fixturing, such as environmental chambers and our new DMA tensile grips, our ElectroForce® series of test instruments are the ideal platform for advanced viscoelastic property measurement of:
- Elastomers
- Biomaterials
- Gels
- Foods
- And more! |
|
ATEasy is a rapid application development framework for functional test, ATE, data acquisition, process control, and instrumentation systems. ATEasy provides all the necessary tools to develop and maintain software components, from instrument drivers to complex test programs. It is designed to support and simplifies ATE projects with long life cycles. With ATEasy, test applications are faster to generate and easier to maintain.
|
|
* USBscope50 is a tiny PC based oscilloscope which connects via the USB port, combining the ease of use, portability and economy of PC based scopes with high performance normally associated with much larger bench oscilloscopes.
* USBwave12 is a new concept in USB function generator products. PC based function generators offer many user benefits including flexibility, ease of use and economy.
The USB interface has developed into probably the best and most widely implemented PC peripheral connection method and is a natural choice for the function generator.
* USBpulse100 is a new concept in USB Digital Pulse/Clock Generator products. PC based pulse generators deliver many user benefits including flexibility, ease of use and economy. They are an invaluable tool during design and debug of digital circuits and can be used to quickly test the behaviour of a circuit under different input frequency and duty cycle conditions.
* USBcount50 is a PC based frequency counter designed for maximum flexibility, ease of use and economy. It is an invaluable tool during design and debug of digital circuits and can be used to quickly to verify generated frequencies, pulse widths and duty cycles. |
|
IEDScout is a software tool for engineers working with IEC 61850 devices. It provides numerous useful functions needed in the substation or the laboratory.
IEDScout serves many applications with IEC 61850 devices, among them are:
* Testing
* Troubleshooting
* Commissioning
* IED Development
Download a free evaluation version on www.omicron.at |
|
| Designed to slip easily into the bed of a pick-up truck, Seraphin® Slip-On Volumetric Calibration Unit can speed the job of calibrating multiple fuel dispensing units, while at the same time, enhancing safety. The unit consists of three 5 gallon or 20 liter NIST compliant bottom drain provers individually plumbed to 80 gallon stainless steel transfer tanks. The 80 gallon configuration allows for up to 48 calibration tests before returning to the fuel station's storage tank for dumping. |
|
Richmond Technology fabricates and cleans custom cleanroom bags in a Class 100 cleanroom for absolute cleanliness.
Typical Applications for Custom Cleanroom Bags:
- Wafer transport carriers, boats, canisters
- Polycrystalline silicon (chunk)
- Polycrystalline silicon (granular)
- Clean aerospace assemblies
- Drive read-write heads (MR heads)
- Disc drive manufacturing
- Pharmaceuticals
- Medical devices
- Computer subassemblies
- Thin film disc
- Optical products
- Filters
- Device transport
- Materials, components, parts assemblies and miscellaneous items that are produced in cleanrooms |
|
Richmond Technology extrudes and converts two types of high strength polyethylene. These high strength materials provide superior physical strength characteristics while maintaining or improving contamination control properties. In most cases, the increased strength will allow significantly thinner materials to be used, which provides greater package flexibility and a greater value to the customer.
Designed for critical ultra-clean packaging applications, these polyethylene films do not contain any additives such as slip agents, antiblock, or antistats. The materials and processes have been designed to eliminate or reduce concerns of ionic contamination, outgassing, non-volatile residues, and particulate matter. |
|
| Richmond Technology engineers developed PFL-400 which provides a low moisture vapor transmission rate (MVTR) and excellent contamination control properties. It is a proprietary co-polymer/solid foil laminate with a barefoot polyethylene inner layer that is free of additives, slip agents, and antiblocks. This sturdy construction and a refined processing technique ensures reliable performance in a variety of critical applications. |
|
Richmond Technology engineers developed the CAV-40 product in response to the market demand for a high barrier clear film with excellent cleanliness characteristics. The proprietary outer layer delivers extraordinary moisture vapor barrier properties while the inner sealant layer offers outstanding cleanliness characteristics. None of the harmful process aids (i.e. slip, anti-block, etc.) used in traditional polyethylene sealant layers are present.
CAV-40 is the choice for clean transparent moisture barrier protection of sensitive product during transport and/or storage. |
|
ROM emulation is a powerful and versatile method of microprocessor testing. ROM emulation has emerged as the technique of choice for microprocessor test and diagnostic applications. A microprocessor-based board is tested by replacing the boot ROMs on the Unit Under Test (UUT) with memory emulation pods. Each pod handles eight bits of the data bus. Processors from 8 to 32 bits can be controlled with one to four pods (even the most advanced CPUs such as the Intel Pentium generally use only an eight-bit boot path). The emulator takes control of the UUT by resetting the processor and, under the test program's control (monitor program), exercises all functions on the board. Synchronization with the UUT is automatic and requires no additional hardware or connections.
|
|
Geotest's offers a large selection of PC, 3U and 6U PXI instrumentation chassis allowing test engineers to design system configurations specifically for automatic test equipment (ATE) systems, data acquisition, process control applications, and other industrial applications that require PC-based and PXI-based instrumentation.
|
|
Geotest offers a wide selection of digital I/O products that meet the demanding requirements of any functional test application. With test rates up to 200 MHz, pin counts that range from 32 to 512 pins per system, vector memory that ranges from 256K to 128MB per pin, and I/O levels that include TTL, PECL, LVDS, and programmable, Geotest has the right products for your custom application.
|
|
Geotest offers a wide selection of digital I/O products that meet the demanding requirements of any functional test application. With test rates up to 200 MHz, pin counts that range from 32 to 512 pins per system, vector memory that ranges from 256K to 128MB per pin, and I/O levels that include TTL, PECL, LVDS, and programmable, Geotest has the right products for your custom application.
|
|
The GX1838 provides 8 output channels and three Voltage Rails. Each of the 8 output channels can be connected to one of the three voltage rails or set as Open. Voltage Rails A through C are used as voltage sources for the High and Low state. Additionally, the GX1838 offers a programmable DC electronic load capable of loading up to 500mA. The GX1838 occupies a single 3U PXI slot.
The GX7400 is a dual output programmable DC power supply designed for use in PXI systems. The GX7400 occupies three 6U slots and is controlled via the PXI bus. The AC power is provided using a panel mounted receptacle. The power supplies are fully isolated and can be externally connected in series to provide higher voltage. Each of the dual outputs can accommodate a programmable or a fixed power supply module.
The GT7404 is a low cost method of providing controlled power to interface and test target circuitry. The GT7404 permits +5V, +12V, -5V, and -12V power outputs present on the GTXI motherboard to be switched through a DB25 connector for use by the unit under test and interface circuitry.
|
|
CTS Connect - Air Actuated & Manual Connectors
Manual Connectors
The CTS ConnectTM line of manual connectors are designed for durability and superior wear. These rugged connectors are designed with the operator in mind, featuring ergonomic actuating levers and optional comfort grip handles.
Air Actuated Connectors
CTS ConnectTM air actuated internal or external connectors effectively seal on smooth, rough or threaded circular features of a part. The connectors consist of an air-driven internal piston that compresses the durable proprietary seal material against the surface of the part. This creates a tight seal that meets all test pressure requirements, regardless of surface shape or finish |
|
|
