|
|
|
|
|
|
The MicroDock II is the world’s most advanced, compact and affordable automatic calibration, testing and data management system for portable gas detection equipment. Compatible with BW’s GasAlertMicro 5, GasAlertMicro 5 PID, GasAlertMicro, GasAlertMicroClip, GasAlert Extreme and GasAlertClip Extreme family, the MicroDock II is expandable to up to 10 docking modules (including up to 6 charging units).
- Fully automatic “hands-free” calibration & functional bump test
- Automatically verifies performance of audible and visual alarms
- No computer required
- Entirely self-contained
- Fully portable
- Lightweight and mobile
- Operates via line power or a set of four C-cell batteries
- Add additional self-contained docking modules to system via simple, plug-in connections-no external pressure transducers or gas lines necessary
- Simplify record keeping
-Verify proper performance
- Reduce maintenance costs
- Multiple MicroDock II systems can be connected via a LAN
- Multi-language support in English, French, German, Spanish, and Portuguese
|
|
The new CheckBox IMH automates the routine gas (bump) testing, calibration and management of Crowcon portable gas detectors and facilitates the traceability and routine maintenance of instruments. Capable of operating with up to 10 instrument interfaces, CheckBOx IMH is available for use with the Tetra, Triple Plus Plus and Gasman products.
* Automatic gas (bump) testing
* Automatic calibration
* Can use single gases or quad mixtures
* Up to eight gas inlets
* Five or ten instrument interfaces
* Accommodates pumped or non pumped instruments
* Data and event file uploading
* Stores and controls configurations
* Records all activities
* Provides reports and certificates
|
|
The DS2 Docking Station provides the ultimate flexibility for managing your gas monitors wherever you use them. The DS2 gives you all of the benefits of consistent automated calibration, record keeping, battery recharging and instrument diagnostics for your monitors to limit your liabilities and safety hazards. Two way wireless and/or ethernet connectivity enables you to link up to 100 stand-alone Instrument Docking Stations (IDSs) from remote locations anywhere in your facility and relay the data back to one central database for total instrument management. A graphical user interface tool (DSSAC) allows an administrator to view operations on each Docking Station from a network computer, making it easy to track instruments, print reports, set events and change parameters for any location.
|
|
GasCal 1100 Gas Dilution Calibrator
The Ecotech GasCal 1100 Gas Dilution Calibrator performs precise
gas dilution calibrations, ozone analyser precision checks and gas
phase titrations using an optional internal ozone generator. It is
ideal for stand alone use or incorporation into ambient air or emissions
monitoring systems.
• Single and multipoint calibrations can be performed using precise mass flow controllers
• Perform gas phase titrations (U.S. EPA Method) and ozone precision checks using an internal ozone generator (option)
• Parameter setup and output via inbuilt LCD and keypad or an external PC
• External remote control possible via data acquisition system or suitable gas analyser
• Mass flow controller zero stability drift less than 0.6 % full scale per year
• Optional Carry case allowing the GasCal-1100 to be securely carried from location to location
• Optional purge facilitates flushing of calibration gas lines
|
|
PORTACOUNT® RESPIRATOR FIT TESTER
The PORTACOUNT® PRO and PRO+ Respirator Fit Testers Deliver Fit Testing You Can Trust.
Fit testing the right way means you’re improving your risk management program while providing the best possible protection for your workers. Equally important, you’re complying with all regulations. In fact, there are specific OSHA-accepted quantitative fit test protocols written for
PORTACOUNT fit testers in the OSHA regulations. The PORTACOUNT PRO Respirator Fit Tester is more than a piece of equipment. It’s peace of mind.
No other fit tester can quantitatively fit test all types of respirators – gas
masks, SCBAs, respirators, even N95 disposable (filtering-facepiece)
respirators. If the mask requires fit testing, count on the PORTACOUNT PRO+ fit tester to provide the fastest and easiest OSHA-accepted fit test method.
It’s More Than a Fit Test. It’s Someone’s Life.
|
|
| ... products without technical information |
| |
|
|
|
|
From CAD to mesh generation for analysis, ANSYS ICEM CFD provides sophisticated geometry acquisition, mesh generation, mesh editing, a wide variety of solver outputs and post-processing. ANSYS ICEM CFD is the only Universal pre-processor for analysis including FEA, CFD and other CAE applications such as particle transport and computational electro-magnetics. Used for engineering applications such as computational fluid dynamics and structural analysis, ANSYS ICEM CFD's mesh generation tools offer the capability to parametrically create grids from geometry in multi-block structured, unstructured hexahedral, tetrahedral, hybrid grids consisting of hexahedral, tetrahedral, pyramidal and prismatic cells; and Cartesian grid formats combined with boundary conditions. ANSYS ICEM CFD is the swiss army knife of meshing, our product vision is to provide a variety of flexible tools that can generate "any" type of mesh on "any" type of geometry for "any" solver or "any" application.
Key Features:
Intuitive built-in geometry creation and highly automated functionality for the modification and repair of imported CAD data.
Ability to work with both NURBs and faceted geometry types like STL or existing meshes.
Robust tools for creating all mesh types: hexahedral, tetrahedral, prism, pyramid, quad, tri or bar elements.
Highly tolerant of imperfect/overdetailed CAD data containing sliver surfaces, gaps, holes and overlaps (Patch Independence)
Smoothing, coarsening, refinement, element type conversion, linear or quadratic element support.
More than 100 CFD/CAE solver interface formats.
File based transfer of CFD and structural results for Fluid structure interaction simulations.
Automated batch processing through an intuitive scripting framework.
|
|
The ANSYS Fatigue Module adds the capability to simulate performance under anticipated cyclic loading conditions over a product's anticipated life span. Incorporating both Stress Life and Strain Life analyses with a variety of mean stress correction methods, including Morrow, Smith-Weston-Topper (SWT) and no mean effects, the Fatigue Module provides contour plots of fatigue life, damage, factor of safety and stress biaxiality. Additional results include rainflow matrix, damage matrix, fatigue sensitivity and hysteresis.
For Stress Life the fatigue module supports the following fatigue types:
Constant amplitude, proportional loading
Non-constant amplitude, proportional loading
Constant amplitude, non-proportional loading
For Strain Life the fatigue module supports the following fatigue types:
Constant amplitude, proportional loading
Non-constant amplitude, proportional loading
|
|
VISI Progress is dedicated software for the design of Progressive Dies and Press Tools. Industry specific functionality provides a more productive and efficient design experience. Helping the designer with intelligent decisions will reduce the potential for error and greatly improve manufacturing productivity.
|
|
|
|
|
|
Pro/ENGINEER Fatigue Advisor
Ensure reliability
Products subjected to repeated cycles of loading and unloading can fail, even if the stresses are well under safe values - a condition known as fatigue. Pro/ENGINEER Fatigue Advisor can bolster product reliability by enabling engineers to simulate and improve the fatigue performance of their designs. This reduces design iterations and costly test programs, while improving product durability. Improve your verification and validation processes with Pro/ENGINEER's advanced fatigue analysis capabilities.
Benefits
- Conduct fatigue analysis, evaluating performance measures such as life, damage, and factor of safety
- Use durability characteristics in design studies to optimize for product life
- Better understand product durability in real-world settings by specifying repeated standard loads
- Make optimal design decisions, incorporating considerations of scheduled obsolescence
- Improve product quality, reduce unplanned after-market service and warranty expenses, and avoid costly product recalls
|
|
| ... products without technical information |
| |
|
|
|
|
The demands made of particle size analysis are constantly increasing. This is also reflected in the greater requirements made in the new standard ISO 3310. In order to adapt our test sieves to these new requirements, RETSCH has developed a completely new manufacturing process that guarantees a previously unattained quality and consistency in sieve production (200 x 50 mm, 200 x 25 mm, 203 x 50 mm (8"x 2")). In addition, a logistic manufacturing system makes it possible to record each and every material used in the process.
Product Advantages
- one piece construction and fabric-transition without any grooves to prevent cross contamination (no solder, no residues, etc.)
- a high degree of corrosion resistance and ease of cleaning due to high-alloy stainless steel (specification: 316)
- 15% lighter than traditional sieves while at the same time increasing the free sieve area
- previously unattained product quality due to fully automatic production and extensive optical inspection with optimum design
- innovative resistance welding technology guarantees permanently tight sieve fabric
- maximum stability and optimum sealing when used in sieve stacks
- clear and precise labeling of the sieves with full traceability based on individualized laser engraving
|
|
Retsch sieve shakers are used in research & development, quality control of raw materials, intermediate products and end products, and in production control. The AS 200 series enables every user to select a suitable device according to his individual requirements, profile and budget. The AS 200 control meets the highest standards in quality assurance and offers a microprocessor-controlled measuring and control system, patented and unique throughout the world, for constant vibration. It can be calibrated, and ensures for the first time 100% reproducibility of sieving results, and not only for one device, but all AS 200 control units one to another. This provides the prerequisite for monitoring inspection, measuring and test equipment according to ISO 9000.
Further models: AS 300 control, AS 400 control
|
|
With the sieve shaker AS 450 RETSCH have designed their first siever for 400 mm and 450 mm sieves which operates with a three-dimensional sieving motion. It can be used for dry and wet sieving. The optimized electromagnetic drive allows for an amplitude up to 2.2 mm which renders the separation process much more effective than with other sieve shakers of this type.
- Suitable for dry and wet sieving
- Measurement range 20 μm to 125 mm
- High sieve loads (up to 20 kg)
- Excellent separation efficiency even with short sieving times
- Electromagnetic drive for high loads
- Digital parameter setting with controlled amplitude
- Mobile operation panel for comfortable handling
|
|
With their innovative and practical features, the new generation of FRITSCH Sieve Shakers satisfy all requirements for accurate and reproducible sieving analysis and even exceed requirements in many areas.
These instruments offer maximum comfort and precision with automatic amplitude control, programme selection, control and evaluation software as well as high-quality sieve stack tensioning system.
The top model ANALYSETTE 3 PRO can be integrated into any quality management system according to DIN EN ISO 9000:2001 as a testing instrument thanks to state-of-theart electronics and maximum reliability.
FRITSCH Sieve Shakers are available for sieves up to 450 mm in diameter for dry, wet and micro-precision sieving. The automatic sieving analysis is performed by the free control and evaluation software AUTOSIEVE.
|
|
| ... products without technical information |
| |
Test Accessories for
- Electrician
- Laboratory and Education
- Test and Measurement Equipment
- Electronics
The complete product range for measuring, testing, connecting and experimenting
Our Safety Test Accessories are touch-protected according to IEC / EN 61010-031:2002
|
|
| ... products without technical information |
| |
sf-Test Points, M16x2
Specially designed as a measuring point in a system; for measurement, control and service as well as venting valve and for taking test samples.
|
|
| ... products without technical information |
| |
Wind blower for environmental check/test stand technology after Kunden-Spezifikation. Special fans in axial and radial building method.
Blower for aero-dynamic tests for Environmental test/test of facilities according tons more customer specifications. Special fan in axially and centrifugal Design.
|
|
| ... products without technical information |
| |
... see all the products in the category
Blowers
|
|
Rosenberger offers a wide product range for applications in industrial test & measurement such as RF high-precision connectors and adaptors, test accessories and test components.
|
|
| ... products without technical information |
| |
|
|