|
|
Smart pressure transmmitter model APC-2000 ALW with Hart protocol/Profibus PA.
Smart pressure transmitters are applicable to the measurement of the pressure, underpressure and absolute pressure of gasses, vapours and liquids. Transmitters with direct or remote diaphragm seal are applicable to the measurement of the pressure and level (in open tank) of liquid. The active sensing element is a piezoresistant silicon sensor.
Transmitter can be programmed through:
- hand-held Hart communicator model KAP-03(Aplisens) or other
- PC with software Raport-01 or other
- local adjustment which allows setting of the following parameters: measuring range adjusted without pressure source, measuring range adjusted with pressure source, zeroing, measuring units, damping, type of characteristic, starting point of sqrt characteristic, display setting, factory setting.
User features:
- Piezoresistive sensor
- Measuring range: min. 0 ... 1 mbar; max. 0... 1000 bar
- Output signal: 4...20 mA, 0...20 mA, 0...5 mA + Hart, Profibus PA
- Intrinsic safety and explosion proof certificates
- Accuracy: 0,075%
- Process connection: 1/2NPT, M20 x 1,5; G 1/2";
flush diaphragm (G 1/2"; G 1"; M30 x 2); diaphragm seals;
|
|
Measurement systems using Endress Hauser's process pressure and differential pressure transmitters, with long-life ceramic measuring sensors, are the highly accurate and forward-looking alternative to conventional transmitters and pressure gauges with an electric output signal.
You can choose from a practical programme of systems for almost every task that involves pressure measurement. From the single measurement point to the interactive measurement facility with a connection to supervisory automation systems, we offer you the best solution. National and international approvals (e.g. EEx, ATEX, WHG, VbF, StEx, CSA, etc.) permit our systems to be used in all areas of application.
|
|
Industrial pressure transmitter
The PMP 1200 Series is a complete range of pressure transmitters designed to optimize the relationship between price and performance while providing flexibility from a standard production device.
Applications include general purpose industrial, refrigeration, oil & gas well head monitoring and control, compressor performance monitoring and static pressure measurements in flow applications.
Features & Benefits:
Ranges from 2.5 to 15,000 psig; 5 to 15,000 psia
±0.25% FS accuracy
Absolute and gauge format
NACE compatible with hastelloy C276 and 316L SS
Low cost, ex-stock delivery
Πmarked
UL/FM/CSA IS Class I, Div I, Groups A,B,C, and D
PTX 1240 Explosion-proof Class I, Div I
|
|
Compact and easy to integrate, the pressure transmitter GR is equipped with a ceramic cell being able to measure pressures going from -1 to 250 bar. It delivers a signal 4/20mA and is declined with cable output (IP67) or a connector DIN 43650 (IP65).
The transmitter GR type is dedicated to the integrators. The principal applications are the distribution of gas, water and the boilers industrial.
Available in version ATEX EEx ia IIC T5/T6, it can be installed indifferently in zones for gas 0,1 or 2 or zones for dust 20,21 and 22.
|
|
|
With diaphragms made of stainless steel (no more sealing problems) for all applications (hydraulics, pneumatics). Up to 600 bar in reliable SUCO quality. Unbeatable price/performance ratio.
|
|
The SP96 pressure transmitter is made with 316S.S. piezoresistive oil filled cells and is to be installed at the bottom of the tank. These transmitter's are made in 316 S.S. and provide a 4-20mA output signal. The SP96 is available in a great variety of pressure ranges and can also be ordered with a Zero and Span adjustment. This unit can be easily customized to handle a wide range of applications for different types of liquids, a variety of food industry applications, as well as for gases.
FEATURES
*Loop powered, 4-20mA signal output
*Measuring ranges from -14 tp 2900PSI (-1 to 200Bar)
*Absolute and gauge pressure ranges
*Low cost yet rugged and compact design- Body entirely 316 S.S.
*High accuracy, Excellent repeatability & Temperature compensated
*3A approved
For applications with aggressive mediums, the SPC98 with a ceramic sensor in an optional Hastelloy-C body is offered.
|
|
ST2000
ST 2000 pressure transmitters are a series of two-wire microprocessor-based, 4-20 mA instruments. The thick film ceramic sensor can measure gauge or absolute pressure with ranges of 0.2 to 460 bar (3 to 6700 psi).
ST 3000 Series 100 - Absolute
Honeywell ST3000 Series 100 absolute pressure transmitters are used in applications in which high accuracy in the vacuum range of pressure is needed to include low-pressure measurement in vacuum distillation columns, where energy savings are directly proportional to the vacuum in the column.
ST 3000 Series 100 - DP
Honeywell's ST 3000 S100 differential pressure transmitter can be used with any primary flow element to provide proven, repeatable flow measurement, from furnace combustion airflow rate to hydrostatic tank gauging.
ST 3000 Series 100 Flange
Honeywell's ST 3000 Series 100 flange-mount transmitters may be installed directly onto a tank flange and are offered with a variety of tank connections to include ANSI flange and sanitary connections.
ST 3000 Series 100 Gauge
For applications requiring direct connection to processes requiring small flange, small sanitary connections or 1/2" NPT, Honeywell offers the STG14T transmitter.
ST 3000 Series 100 In-Line
ST 3000 Series 100 in-line transmitters are used in applications including high-pressure measurement in boilers, fuel feeds and high-pressure reaction vessels, and can be installed in a wide variety of hazardous environments.
ST 3000 Series 100 Remote Seals
Honeywell's ST 3000 Series 100 remote seal transmitters demonstrate proven reliability in applications with a wide variety of secondary fill fluids for corrosive or high temperature process fluids.
ST3000 Series 100 Temperature
Honeywell transmitters demonstrate proven reliability in hundreds on installations in a wide variety of industries and applications. All ST 3000 transmitters can provide a 4-20 mA output, Honeywell Digitally Enhanced (DE) output, HART* output, or FOUNDATIONTM Fieldbus output. When digitally integrated with Honeywell's Process Knowledge SystemTM, EXPERION PKSTM, ST 3000 instruments provide a more accurate process variable as well as advanced diagnostics.
ST 3000 Series 900 Absolute
Honeywell's ST 3000 Series 900 Absolute Pressure Transmitters bring proven smart technology to pressure measurement applications in which high accuracy in the vacuum range of pressure is needed.
ST 3000 Series 900 DP
Honeywell's ST 3000 Series 900 Differential Pressure Transmitters bring proven smart technology to a pressure measurement applications, from furnace combustion airflow rate to hydrostatic tank gauging. It can be used with any primary flow element to provide proven, repeatable flow measurement.
ST 3000 Series 900 DP/GP
Honeywell's STD904 and STG90L transmitters are designed for applications where the highest accuracy is not required. STD904 transmitter applications include water flow for utilities. The STG90L gauge pressure transmitter is typically used for pressure in water and gas lines.
ST 3000 Series 900 Flange
Honeywell's ST 3000 Series 900 flange-mount pressure transmitters are offered with a variety of tank connections including ANSI flanges and sanitary.
ST 3000 Series 900 Flush Mount
Honeywell offers the STG93P transmitter for direct insertion in processes with the use of a 1" sleeve, welded into the process line. The primary application is pressure measurement in the head box of pulp and paper plants.
ST 3000 Series 900 Gauge
Honeywell's ST 3000 Series 900 gauge pressure transmitter applications include high-pressure measurement in boilers, fuel feeds and high-pressure reaction vessels in the petrochemical and hydrocarbon recovery industries or in any location where accuracy and reliability are crucial to safe, economical operation.
ST 3000 Series 900 Seals
Honeywell's ST 3000 Series 900 Remote Seal Transmitters are ideal for applications in which the transmitter must be mounted remotely from the process, including level measurement in pressurized vessels in the chemical and hydrocarbon processing industries, as well as flow measurement for slurries and high viscosity fluids in the chemical industry.
|
|
|
REOTEMP TRANS-P LINE Pressure Transmitters and Transducers all convert applied pressure to an electrical signal that can be interpreted by a computer or other interpretive device, where it can be used to display or control a process variable. Ranges from vacuum to 60,000 psi.
|
|
The manufacture of pressure transmitters is the core expertise of STS Sensor Technik Sirnach AG.
* Digital pressure transmitter DTM :
- Pressure ranges from 0¡50 mbar and -1¡1000 bar available
- Accuracy pressure measurement ¡Ü 0.1%
- Interface RS485 or RS232
* Intrinsically safe pressure transmitter ATM / Ex :
- Pressure ranges from 0¡50 mbar and -1¡1000 bar available
- Approval according directive intrinsical safety II 1G EEx ia IIC T4¡T6
- Accuracy pressure measurement ¡Ü 0.1%
|
|
Applications:
- Hydraulics / Pneumatics
- Automation engineering
- General industrial applications
Special Features:
- Measuring rate up to 1 kHz
- Compact size
- Design with integrated Y-connector
- Version with internal DIP-switches for bus configuration
- Configuration software EasyCom CANopen
|
|
Applications:
- Machine building
- Machine tools
- Control and feedback control systems
- Hydraulics / Pneumatics
- Pumps/ Compressors
Special Features:
- Compact design
- Free of charge test report
- Certified quality
- Large stock program
Specifications:
- Pressure ranges: 0 ... 1 bar up to 0 ... 600 bar relative, 0 ... 1 bar up to 0 ... 25 bar absolute
- Non-linearity 0.25 % BFSL or 0.5% BFSL
- Signal outputs: 4...20 mA, 0...10 V, 0...5 V, 1...5 V, 0.5 ... 4.5 V and more
- Process connections: G 1/4 DIN 3852-E, G1/4 B, G1/4 female, 1/4 NPT, 7/16-20 UNF and more
- Electrical connections: DIN connector A and C, M12x1, 2m cable
|
|
- -100mbar to 2500 Bar
- 4-20mA, 0-20mA, 0-5 VDC or 0-10VDC Output Signals
- Input Voltage 24VDC
- Combined Error ±0.25 %FS , ±0.5 %FS
- Over Pressure FS %150 ( 2 times )
- Operating Temperature - 40°C +125 °C
- Electric connection M12 connector, five Pin bendix connector
HIRSCHMAN
- Process connection G1
- Cover material: 304,316 stainless steel
|
|
ST2000
ST 2000 pressure transmitters are a series of two-wire microprocessor-based, 4-20 mA instruments. The thick film ceramic sensor can measure gauge or absolute pressure with ranges of 0.2 to 460 bar (3 to 6700 psi).
ST 3000 Series 100 - Absolute
Honeywell ST3000 Series 100 absolute pressure transmitters are used in applications in which high accuracy in the vacuum range of pressure is needed to include low-pressure measurement in vacuum distillation columns, where energy savings are directly proportional to the vacuum in the column.
ST 3000 Series 100 - DP
Honeywell's ST 3000 S100 differential pressure transmitter can be used with any primary flow element to provide proven, repeatable flow measurement, from furnace combustion airflow rate to hydrostatic tank gauging.
ST 3000 Series 100 Flange
Honeywell's ST 3000 Series 100 flange-mount transmitters may be installed directly onto a tank flange and are offered with a variety of tank connections to include ANSI flange and sanitary connections.
ST 3000 Series 100 Gauge
For applications requiring direct connection to processes requiring small flange, small sanitary connections or 1/2" NPT, Honeywell offers the STG14T transmitter.
ST 3000 Series 100 In-Line
ST 3000 Series 100 in-line transmitters are used in applications including high-pressure measurement in boilers, fuel feeds and high-pressure reaction vessels, and can be installed in a wide variety of hazardous environments.
ST 3000 Series 100 Remote Seals
Honeywell's ST 3000 Series 100 remote seal transmitters demonstrate proven reliability in applications with a wide variety of secondary fill fluids for corrosive or high temperature process fluids.
ST3000 Series 100 Temperature
Honeywell transmitters demonstrate proven reliability in hundreds on installations in a wide variety of industries and applications. All ST 3000 transmitters can provide a 4-20 mA output, Honeywell Digitally Enhanced (DE) output, HART* output, or FOUNDATIONTM Fieldbus output. When digitally integrated with Honeywell's Process Knowledge SystemTM, EXPERION PKSTM, ST 3000 instruments provide a more accurate process variable as well as advanced diagnostics.
ST 3000 Series 900 Absolute
Honeywell's ST 3000 Series 900 Absolute Pressure Transmitters bring proven smart technology to pressure measurement applications in which high accuracy in the vacuum range of pressure is needed.
ST 3000 Series 900 DP
Honeywell's ST 3000 Series 900 Differential Pressure Transmitters bring proven smart technology to a pressure measurement applications, from furnace combustion airflow rate to hydrostatic tank gauging. It can be used with any primary flow element to provide proven, repeatable flow measurement.
ST 3000 Series 900 DP/GP
Honeywell's STD904 and STG90L transmitters are designed for applications where the highest accuracy is not required. STD904 transmitter applications include water flow for utilities. The STG90L gauge pressure transmitter is typically used for pressure in water and gas lines.
ST 3000 Series 900 Flange
Honeywell's ST 3000 Series 900 flange-mount pressure transmitters are offered with a variety of tank connections including ANSI flanges and sanitary.
ST 3000 Series 900 Flush Mount
Honeywell offers the STG93P transmitter for direct insertion in processes with the use of a 1" sleeve, welded into the process line. The primary application is pressure measurement in the head box of pulp and paper plants.
ST 3000 Series 900 Gauge
Honeywell's ST 3000 Series 900 gauge pressure transmitter applications include high-pressure measurement in boilers, fuel feeds and high-pressure reaction vessels in the petrochemical and hydrocarbon recovery industries or in any location where accuracy and reliability are crucial to safe, economical operation.
ST 3000 Series 900 Seals
Honeywell's ST 3000 Series 900 Remote Seal Transmitters are ideal for applications in which the transmitter must be mounted remotely from the process, including level measurement in pressurized vessels in the chemical and hydrocarbon processing industries, as well as flow measurement for slurries and high viscosity fluids in the chemical industry.
|
|
- Gauge measurements
- Ranges in steps of 0...1 bar up to 0...400 bar
- Output signal: 4...20 mA two-wire
- 0...10 V tree-wire
Applications
Pressure measurement of liquids and gases
Machines & apparatus, manufacturers of pumps,compressors and
cooling plants, transport & lifting equipments, boiler manufacturers, heating & air conditioning etc
Main attributes
Materials wetted by process of stainless steel
External (P31) or internal (P30) separating diaphragm
Stainless steel housing, mode of protection IP 65
Simple mounting and commissioning
|
|
Turn Down:
The UniTrans enables with its maximal 1 : 20 Turn down an adaption to applications also at great changes of the measuring range (e.g. a 100 bar transmitter can be turned down to 5 bar).
As IS - pressure transmitter the UniTrans can perfectly meet the hardest requirements of industrial pressure measurement.
Configuration:
With the easy-to-use menu, the user can set parameters such as language, unit, zero point, span or inverted signal. The UniTrans also offers the possibility of a tank linearisation with up to 32 holding points.
Multifunctional display:
The optional display can be adjusted mechanically and electronically, thus guaranteeing many display variations and an optimal reading from different directions. Bargraph and trend are permanently displayed. Only a minor modification of the case is required in order to be able to read the display from above. All standard units can be displayed. Two further lines are available for entering additional text (e.g. min./max. values or temperature at the sensor).
|
|
SST77 series SMART differential pressure transmitters are
microprocessor-based instruments that combine the analog signal
advantages (4h-20 mA) together with the flexibility of digital
communication (Bell 202 standard FSK) using HART® protocol.
They can be remotely configured by a universal hand held terminal
(HHT) or by a PC with a dedicated interface and Spriano software.
Moreover, it is possible to locally configure the instruments (zero
and span) by means of 2 pushbuttons and to display the data on
the wide LCD display.
The SST77 transmitters measure differential pressure with spans
from 1,125 to 20000 mbarwith a static pressure up to 100 bar.
The pressure measuring element is a piezoresitive sensor. It is
possible to choose a variety of sensors to satisfy all process
conditions.
The Spriano measuring cell contains the sensor and transmits
pressure to the electronics. Thermal drift is compensated using
the temperature signal generated by a PTC thermistor integrated
in the sensor itsself.
Based on these readings the microprocessorgenerates the 4h-20
mA analog output "two wires system" and displays the pressure
measurement on the LCD.
Some of the main characteristics of this microprocessor-based
transmitter, are:
- Wide rangeability.
- Automatic temperature compensation.
- Digital communication using HART® protocol.
|
|
The differential pressure transmitter of type series 692 with proved, unique ceramic technology, features calibrated and amplified sensor signals which are available as standardized voltage or current outputs.
Various application-specific pressure and electrical connections and housing materials suitable for different media can be provided.
|
|
The differential pressure transmitters of the Type 694 series incorporate a proved ceramic fulcrum lever technology. They deliver calibrated, temperature-compensated sensor signals, available as standard voltage or current outputs.
They are ideal for registering low air flow in air conditioning systems and for the measurement of fine pressures in environmental, laboratory and clean-room applications (air and non-corrosive gases).
|
|
The pressure transmitter of product range type 663 have calibrated and temperature compensated sensor signals which are available as voltage output.
The amplified linear voltage output signal, can be connected directly into an electronic control system.
The transmitter can be mounted directly due a pcb board or with a 2.5 mm plug connection.
|
|
These compact OEM pressure transmitters type series 511 meet the highest specification for mechanical stress, EMC compatibility, and operational reliability, which means that this range is particulary suitable for all demanding industrial applications.
This sensor utilises a ceramic technology, developed by Huba Control and for the last 10 years, in millions of applications, used in combination with unique integrated electronic design, means that the type 511 series has a high degree of accuracy for all temperature ranges. These units are available in small or production quantities, with an excellent price to performance ratio.
|
|
MEASURING CHAMBERS AND WETTED PARTS MATERIALS
Measuring chambers:
- SG74BA: forged steel UNI Fe 50.
- SG74BX: stainless steel AISI 316. Nuts and bolts: in carbon steel. Fulcrum diaphragm: elgiloy.
Force bar: stainless steel AISI 316. Gaskets: viton - teflon.
MEASURE SENSING ELEMENT
Type: double membrane capsule. Material and filling fluid: see codification. Spans range:
- B: 12 h- 60 mbar.
- R: 6 -5- 20 mbar.
The span is adjustable with continuity within the range limits. Measuring range of capsule: ± 100% of max. span. Limits of the working static pressure: -1 h- 35 bar Limits of unilateral overpressure: -1 h- 35 bar. Limits of ambient temperature: -40 h- + 100°C. Temperature limits of process fluid: -40 + + 120°C.
ACCURACY (% of span)
Linearity and hysteresis errors: ± 0,5%.
Repeatability: < 0,15%.
Dead zone: 0,05%.
Zero drift for variation of the supply pressure: 0,15%/ 0,1 bar. (1)
Zero drift for variation of ambient temperature: 0,06%/ CC. (1)
Zero drift for variation of static pressure: 0,2%/ 35 bar (1)
|
|
OEM Relative pressure transmitter Type 503
0 ... 2.5 - 25 bar
The relative pressure transmitter of type series 503 with proved ceramic technology features, adjusted and amplified sensor signals which are available as standardized voltage outputs. Designed for large batch production in OEM applications.
Pressure ranges:
0 … + 2.5 bar
0 … + 4 bar
0 … + 6 bar
0 … + 10 bar
0 ... + 16 bar
0 ... + 25 bar
|
|
SET46 transmitters, complete with diaphragm in AISI 316, measure relative or absolute pressure in measuring spans between 0,035 and 31,5 bar. The pressure measuring element is a piezoresistive sensor. It is possible to choose between sensors to satisfy the process conditions. The sensor, protected from the process fluid by diaphragm, generates a signal corresponding to the actual pressure and is complete with a PTC thermistor which also transmits the temperature of the the measuri ng cell to the electronic system. On the basis of these two values and of the configured parameters the electronic system generates a standard output signal (4 to 20 mA, two wires system) and displays all the necessary data on the LCDdisplay.Theoperating parameters can bechanged by means of the two push buttons that are below the LCD display. Among the relevant characteristics of this microprocessor based transmitter, are the following :
- wide rangeability for the measuring span (abt. 1 to 10)
- automatic temperature compensation in the measuring cell.
|
|
Relativ and differential pressure transmitter Type 402
0 ... 3 - 50 mbar
The pressure transmitters of type 402 with their proven ceramic fulcrum lever technology have adjusted, temperature-compensated sensor signals that are available with voltage outputs.
They are ideally suited for registering fine air flow in air conditioning technology and for measuring fine pressures in the environmental / medical technology sectors.
Pressure ranges
0 … 3 mbar
0 … 5 mbar
0 … 10 mbar
0 … 30 mbar
0 … 50 mbar
|
|
| ... products without technical information |
| |
|
