|
|
Features
- Extra Strong Support Post
- Large Active Bead Surface Area
- Precious Metals Used for All Components Mounted in Teflon Body
- Active and Reference Beads Matched by Size and Resistance
- Teflon Barrier Protects Active and Reference Beads
- Ultra Poison Resistant Active Bead
- Glass Coated Reference Bead |
|
| The Model S4000C Intelligent Sensor is a microprocessor-based professional transmitter designed for use with General Professional monitors' catalytic bead sensors. The unit features one person calibration and can virtually self-calibrate by simply activating a magnetic switching and applying gas. It is designed to monitor combustible gases and vapors within the lower explosive limit (LEL) and provide status indication and alarm outputs. Complies with ANSI/ISA 12.13.01-2000 performance requirements for combustible supplier of gas detectors. |
|
GasBadge Plus is a two-year, maintenance-free, single gas monitor ideal for personal protection from unsafe levels of oxygen, carbon monoxide, hydrogen sulfide, sulfur dioxide or nitrogen dioxide. The unit’s compact size and lightweight (2.5 oz. – 72 grams) allow it to be worn comfortably with a variety of clip attachments, and the top-mounted sensor provides continuous and unobstructed protection even when placed in a shirt pocket. The rugged enclosure is extremely durable and resistant to water and radio frequency interference. A protective concussion-proof overmold protects the unit from extreme abuse in a variety of harsh industrial environments. The large LCD display features a graphical interface and can be set up to show both gas type and direct gas readings (actual ppm or % by volume readout), or just the gas type (Go/No Go display mode). The instrument’s two-button operation allows for easy navigation and setup, which can be password-protected for added security.
|
|
Built to Industrial Scientific’s highest quality and reliability standards, the full-featured GasBadge® Pro provides a lifetime of gas hazard protection with more features than any other single gas monitor available. The instrument can be quickly adapted with interchangeable “smart” sensors to monitor unsafe levels of oxygen or any one of the following toxic gases: carbon monoxide, hydrogen sulfide, nitrogen dioxide, sulfur dioxide, chlorine, chlorine dioxide, phosphine, ammonia, hydrogen cyanide and hydrogen. GasBadge Pro communicates directly via an infrared interface to optional accessories like the Docking Station™, Datalink and infrared professional printer to further simplify and automate calibration, function (bump) testing and data downloading. Standard STEL and TWA readings, and logging of up to one year of survey data are featured along with an event-logger that records the past 15 alarm events.
|
|
The MX6 iBrid™ is the new full featured multi-gas monitor from Industrial Scientific. The user-friendly design of the unit features a full-color liquid industrial crystal display and 5-way navigation button to scroll through the menu-based operating system. Designed to meet a variety of monitoring applications, the MX6 iBrid™ can be set up to detect from 1 to 6 gases, including options for PID and infrared sensors for combustible gases and Carbon Dioxide. Configured with an internal sampling pump or for diffusion operation, it is ideal for applications from confined space entry to personal survey monitoring. The MX6 iBrid™ is compatible with the award winning DS2 Docking Station™ and iNet Instrument Network™ to further simplify and automate calibration, function (bump) testing and data management.
|
|
The iTX Multi-Gas Monitor is the industry's most versatile portable gas detection instrument. Designed to grow with you as your monitoring needs change, the iTX can go from being a single gas unit to a six-gas monitor, or anything in between, with just a few simple user configurations and sensor changes. Featuring advanced "smart" sensor technology, the iTX is capable of recognizing and configuring a wide assortment of field replaceable, interchangeable detection. Providing simplified, single-button operation and calibration functions, the iTX's special Quick-Cal feature quickly calibrates up to four sensors at once.
|
|
| The S4100T Intelligent Sensor is a highly reliable, self-contained, microprocessor-controlled hydrogen sulphide professional transmitter with integral 3 digit readout. It is designed to measure and display concentrations of H2S in the 0-20 ppm, 0-50 ppm or 0-100 ppm range, but will continue to display concentrations up to 120% FSD. The sensing element may be incorporated in the transmitter housing or remotely mounted at distances of 600 meters. The sensor employs thin film metal oxide semiconductor (TFMOS) technology as the measuring principle. |
|
PART # HGDI-SR (SINGLE RELAY)
HGDI-DR (DUAL RELAY)
Hydrogen Supplier of gas detector
Lead-acid professional storage professional batteries emit hydrogen while gassing during charge. Hydrogen concentration of 4% to 75% by volume in air are potentially explosive. Hydrogen professional gas detector is designed to provide for dissipation and warning before any concentration reaches the lower explosive limit (LEL) of 4%.
- 1% Concentration energizes a relay which activates your exhaust blower
- 2% Concentration activates a built-in, pulsating warning professional alarm
- One-Year Warranty
- 110V; 50/60 htz
- 220VAC or 12VDC available
- 7"h x 4 3/4"w - 2 1/2" deep
ADDITIONAL PARTS:
HGDI-REMOTE - 20FT
HGDI-JUNCTION BOX
HGDI-TEST & CALIBRATE |
|
Gas and CO leakage has caused thousands of people's death. You can take necessary precaution easily! We include LNG detector, LPG detector and CO detection in our product line. They are perfect for household use, offices, factories, basements, indoor parkings, storage, professional boiler room, kitchens...
Our detector equipped with power and 2-step Led indicators, which provide clear information about power and alarm. The state-of-the-art sensing element is UL apppreoved, which ensures the reliability of the detector. The various models provide different solutions to protect household from any possible damage which might be caused from gas applications. You can also have AGS-4xx series detecting both CO and LNG for a complete protection.
This product series is CE approved. |
|
Features:
Rugged, ultra-compact (4.2 x 2.4 x 1.4 in / 10.7 x 6.0 x 3.6 cm) and lightweight (5.6 oz. / 160 g)
Simple one-button operation
Standard datalogger (16 hours) and eventlogger (10 events)
Durable, stainless steel alligator clip
Integral concussion-proof professional boot for the most rugged environments
Continuous LCD shows simultaneous gas concentrations for H2S,CO, O2, and combustibles (0-100% LEL or 0-5.0% Methane)
Powered by a lithium polymer battery (run-time typically 14 hours;recharge in less than 3 hours)
Provides 95 dB alarm tone and bright wide-angled alarm bars
Equipped with internal vibrating alarm for high noise areas
Backlight: in alarm (auto) and on demand reactivation
Four alarm levels: Instant Low and High Alarm for all gases;TWA (time weighted average) and STEL (short term exposure limit) for H2S, CO; OL (over limit alarm)
Simple automatic calibration procedure
Fully compatible with BW's MicroDock II automatic test and calibration system
Records TWA, STEL and maximum exposures to gas and professional displays readings on command
User selectable options include: confi dence beep, latching alarm, calibration due date, bump due date, "SAFE" display function, multi-language, span concentration values, combustible sensor measurement selection (0-100%LEL or 0-5.0% v/v methane) and stealth mode
Full function self-test of: sensor, battery, circuitry and audible/visual/vibration alarms
Delivered ready for use with sensors, lithium polymer battey, stainless steel alligator professional belt clip, calibration hose/cap and instructions
|
|
SF6 GasCheck P1 is designed for the location, leak testing and measurement of SF6 gas in high voltage electrical switchgear and many other leakage detection applications. This instrument has none of the problems of registration, storage and transportation associated with instruments based on the radioactive source ECD principle, which also require high purity and high pressure Argon gas. Data Storage and printing at the touch of a button. Although designed for SF6 in switchgear other gases with a high affinity for electrons, such as refrigerant R12 may also be detected.
The negative ion capture (NIC) detector is combined with `smart sensor´ technology. There are no items requiring maintenance or service in the handgun or console.
This instrument meets the demands for quality and traceability to International standards as required by today's industry.
SF6 GasCheck P1 is now also available with a highsense option detecting leaks as small as 1 x 10-8 ml/sec! |
|
| The Model TS4000 Intelligent Toxic Manufacturers of gas detector continuously professional monitors toxic gases in the ppm range or oxygen deficiency, delivering highly accurate detection and protection. The unit features one person calibration and can virtually self-calibrate by simply activating a magnetic contactor and applying gas. It provides status indication and alarm outputs. |
|
J. Dittrich Elektronic gas industrial measuring systems for toxic gases and vapors determine the concentration of toxic gases and vapors in the air mixture at an ambient temperature of -10 to +50° C.
Specific electrochemical transducers measure ammonia (NH3), chlorine (Cl2), carbon monoxide (CO), oxygen (O2), hydrogen sulphide (H2S), nitrogen dioxide (NO2) and nitrogen monoxide (NO) in the ppm range.
The sensors are calibrated with the help of the respective test gas using a potentiometer; there is no or only negligible cross-sensitivity to other substances. |
|
TGS6810, which can detect both methane and LP gas, has been developed for residential suppliers of gas detection. Combining Figaro’s 35+ years of experience in catalyst material technology with its advanced micro fabrication technology, Figaro can produce the most advanced compact pellistor sensors whose durability, stability, quick response, and linear output make them ideal for detecting many combustible gases. As the sensor possesses an adsorbent inside its sensor cap, its cross sensitivity to alcohol is much smaller than traditional catalytic type sensors. In addition, TGS6810 is more durable against silicone compounds than the traditional catalytic type sensors.
* linear output
* compact size
* small sensitivity to alcohol
* sensitive to both methane and LP gas
* meets RoHS requirements
|
|
Supplier of gas detectors E2606 are intended for air quality monitoring - control of combustible gas and oxygen concentration and prevention of gas leaks in confined spaces.
Depending on version the gas detector E2606 uses either advanced metal-oxide semiconductor or an electrochemical industrial gas sensor. Concentration of combustible (methane, butane,hydrogen, etc) can be measured.
- Measuring range 0..5 %vol.
- Temperature range -20..+50 °C
- Output relay 230 VAC, 8A
- Supply 230 VAC or 24 VDC
- Diffusion, flow-through and remote sensor versions
- Visual and audible alarms, adjustable output relay
- Linearized analog output 4-20 mA
- RS485 Modbus RTU interface option for direct Field bus networking
- Wall-mount |
|
| All combustible and explosive gases are combined under the term "EX". Normally the LEL range (lower explosion level) is measured and in some cases in ppm range - by fixed systems or portable gas professional monitors. |
|
MSA provides detectors for continuous monitoring of virtually all hazards of combustible atmospheres, toxic gases, oxygen deficieny and fire using detection methods that best suit your application.
|
|
The effectiveness of SIMTRONICS remote detectors (accuracy, fast response time and high reliability) guarantees the ultimate protection against the risks associated with gases in industrial environments.
The housings are given a special surface treatment to improve their resistance to corrosion (stainless steel or aluminium housings).
The measurement process is based on OXYCOL™ low temperature catalytic oxidation, enabling detection of all combustible gases and gives the detector an extremely long lifetime.
All the explosimeters are equipped with :
• An exclusive system of alarm verification in case of scale overrun,
• A linear response,
• A high stability,
• A very short response time.
The interchangeable and removable cartridges (as well as the support independent from the electronic box) make the remote detector easy to use and maintain.
All commands, configurations and readouts are remotely accessible using the infrared remote controller. |
|
TGS2610 - LP industrial gas sensor
TGS2610 has been widely used for more than 10 years for LP gas detection in residential and industrial gas monitors. Unlike catalytic type detection, TGS2610 is also suitable for portable suppliers of leak detectors due to its high sensitivity to very low concentrations of LP gas and its low power requirements. In addition, the sensor also has wide application in recreational vehicle and marine applications where durability against severe environmental conditions is required.
TGS2611 - Methane gas sensor
TGS2611 has established itself in the methane detection marketplace for more than 10 years. With superior durability against poisons and interferent gases when compared to competing pellistor type sensors, this sensor has found wide application in gas detectors for residential and industrial usage, portable leak detectors, as well as in natural gas vehicles where severe environmental conditions are encountered.
* UL recognized component
* compact size (TO-5 can)
* long life
* pre-sorted for easy calibration
* meets RoHS requirements |
|
The sensing element of Figaro manufacturers of gas sensors is a tin dioxide (SnO2) semiconductor which has low conductivity in clean air. In the presence of a detectable gas, the sensor's conductivity increases depending on the gas concentration in the air. A simple electrical circuit can convert the change in conductivity to an output signal which corresponds to the gas concentration.
The TGS 832 has high sensitivity to R-134a, the most promising alternative to R-12, commonly used in air conditioning systems and professional refrigerators. R-12 and R-22 are also detectable by TGS 832. With its good long term stability, TGS 832 is an excellent, low-cost sensor for CFC detection. |
|
For over 40 years GfG has been specializing in the development and manufacturing of systems for the measurement of explosive and toxic gases, oxygen as well as further parameters in air and water used in communities, chemical industry, fire and civil protection, mining, power supply manufacturers, food processing industry, shipping, steel industry, agriculture and also research institutes and universities.Our range extends from sensors, to the smallest gas measuring device in the world, microprocessor driven professional multimeter with data storage to computer supported systems.
At GfG measuring instruments and sensors are developed by a highly-qualified team of engineers and scientists. A special focus is the development of sensors with the measuring system of IR-absorption, catalytic combustion and thermal conduction.
|
|
Figaro Engineering Inc. specializes in the research, development, manufacturing and marketing company of manufacturer of gas sensors and gas detection equipment.
In 1968, Figaro Engineering Inc. became the first company in the world to develop and commercialize semiconductor gas detection. Globally, major concerns in the fields of gas detection, air quality control, HVAC appliances, and the automotive industry have relied on Figaro Engineering Inc. for gas sensing products.
Based on its extensive and broad-based experience in developing and manufacturing gas sensors, Figaro continues to expand its expertise into new areas of gas detection. |
|
Linear output Electronic modules
In addition to the gas sensing components themselves, Envin are able to supply complete electronic modules which are pre-calibrated and available in different linear output configurations (0-5V, 0-10V & 4-20mA). Such ‘Smart Detection’ offer great technical advantages and considerable cost savings to the instrumentation manufacturer.
These Linear output electronic modules incorporate the proven FiS semiconductor technology and are available for a wide range of gases. |
|
SIMTRONICS “TT63ES” detector is a semi-conductor sensor type with a very low cross sensitivity to other gas.
The basic principle is the resistance variation of a tin oxide semi-conductor. The inflammable gas reacts with the oxygen absorbed at the surface of the semi-conductor, and causes the electric resistance to decrease. The nature of the semi-conductor, its doping and its service temperature contribute to better detectivity of certain gases.
When other semiconductor on the market need to smell gas every week to avoid the sensor to fall asleep, the SIMTRONICSsemiconductor sensor only needs a six-month or one year calibration test.
Modern electronics provides high performance for humidity and temperature rate compensation and long term stability. The circuits ensuring the supply to the sensor, the professional amplifier and the interface are grouped in the flameproof enclosure onto which the detection probe is secured. |
|
• Increased sensitivity for critical applications
The GD10PE is designed for critical applications involving large volumes of air with high velocity. The kind of applications that require reliable detection of low gas concentrations and a fast response.
Typical critical applications include the monitoring of air intakes for HVAC systems in living quarters or professional generators, and monitoring for potential gas leakages in areas with high temperatures in gas turbine packages.
The GD10PE is a stable instrument, and with a measuring range of 0 – 20%LEL the sensitivity for the GD10PE is 5 times higher than standard point detectors. GD10PE is designed for installation in professional air ducts and for mounting through walls and bulkheads in places such as pump rooms.
• Based on SimSource™ IR-source
The patented, silicon-based SimSource™ IR-source has a number of unique features and is insensitive to shock and vibration.
Its long-term performance is stable. SimSource™ has an expected in-service life of 60 years exceeding all current competing technologies, which often have an expected in-service life of only 2 to 4 years. SimSource™ comes with an uncompromising 15 years warranty. SimSource™ does not need to be replaced during its service life.
|
|
GfG is a world leader for manufacturers of gas detection and measurement technology. For over 40 years GfG has specialized in designing, developing and producing the safest and most reliable equipment and detection available.
GfG offers an extensive range of portable professional monitors and fixed systems. The product range includes sensors, the world´s smallest gas monitors, micro-processor controlled multi-gas detectors manufacturers and computer aided system solutions. GfG provides diverse solutios for Toxic, Explosive and Oxygen gas detection in air and water.
GfG equipement is used in a variety of applications and industries including automotive, chemical industries, landfills, steel industries, hospitals, mining, public utilities, food processing, research institutes, universities and wherever the protection of life and property is needed.
|
|
G450 Series - New 4-Gas Detector
Watertight design
The compact and lightweight 4-gas detector continuously measures CO, H2S, O2, and combustibles in ambient air. It's functional and watertight design (IP67) incorporates an impact proof, rubberized housing to meet the toughest requirements of harsh environments.
_____________________________________________________
GfG is a world leader for gas detection and measurement technology. For over 40 years GfG has specialized in designing, developing and producing the safest and most reliable equipment and detection available.
GfG offers an extensive range of portable professional monitors and fixed systems. The product range includes sensors, the world´s smallest gas monitors, micro-processor controlled multi- | | |
