|
|
Rectangular Guage Block:
- Practical master gage for dimensional measurement
- Two types of steel and ceramic gauge blocks are available.
- Four classes of Class K, Class 0, Class1 and Class 2
Long Size Gauge Block Accessory Sets BMX-S1:
- Accessories for gauge blocks with a nominal size of 125 mm or more
- Used to create the masters of height and size.
- A scriber is also available.
Square Gauge Block:
- 24.1 x 24.1 square gauge block
- Three classes of Class 0, Class 1, and Class 2
- Absolute wringing using the hole
|
|
On-line thickness measurement systems for:
* flat films and sheets, thermo-formed sheets made of PET, PVC, PUR, etc.
* coexruded film
* coated and uncoated rubber sheets
Thickness range: 10 µm ... 6 mm
Measuring uncertainty: 1 % of reading
The measuring system is unaffected by variations in density, humidity and colour of the material t be measured as well as unaffected by variations in temperature or vibrations of the surrounding fields.
|
|
Employing proprietary optical scanning technology, the CP7300 provides fast, noncontact, automated 3D surface height, roughness, and local area planarity and uniformity measurements on wafers for rapid, quantitative characterization of photo-lithographic, etch, and polishing process effects. Surface metrology applications include, but are not limited to, measurement and process control of critical surface texture parameters on bare and patterned wafers.
Programmable and automated measurement sequences and sample positioning allows for surface characterization at multiple sites and locations. Integral to each system is a comprehensive and powerful software analysis package with application-specific modules, providing full 3D imaging and data reporting of many surface topography parameters.
|
|
|
Scanning Frames are a critical factor in making a profile measurement. If the material is not presented to the sensor in an accurate and repeatable way, you will not be able to get the most accurate and repeatable measurement. This is why NDC places emphasis on engineering and producing the most accurate scanning frames in the industry. Our scanning frames' registration performance, coupled with our sensors' accuracy and repeatability, give you the most accurate profile measuring tool available.
|
|
Developed and manufactured at Bowers Bradford Site, this new range of internal measuring devices - Bowers SmartPlugs are designed to give the operator great speed of use, unmatched measuring accuracy and superb repeatability.
|
|
General description
- Self-centring high-precision indicating plug gauge allowing static and dynamic measuring
- Application in manufacturing of high-precision bores from Ø 2.98 mm to 270 mm/0.117" to 10.62"
- Measuring range: 0.1 mm to 0.8 mm depending on diameter and type
- Calibration in setting ring
- Various contact points (material and design) depending on work-piece type
- Many designs in standard programme
- Special design on request
- Extensive range of accessories
- Setting rings according to DIN2250-C in standard programme (range Ø 1 mm to 300 mm/0.04" to 11.8")
- Holders and depth extensions are manufactured from temperature stabilised material, ensuring minimal gauging errors.
|
|
The Universal Measuring Gauge has been designed for measurement of internal and external dimensions such as inside & outside diameters, internal & external threads,grooves,tapers,splines,shallow spigots and recess diameters etc. The large variety of accesories can be interchanged to enable the measurement of virtually any type of workpiece.
|
|
Features:
- Patented linear ball bushing movement
- Full 1" of gaging travel / retraction
- Wide measurement range with up to 4.5" ID/ hole to hole and 2.5" OD/ thickness
- Light weight precision machined aluminum frame
- Economically designed thermal isolation handle
- Can be hand held or bench mounted
- Wide variety of standard interchangeable contacts with special application specific contacts available upon request.
- Frame can accommodate dial indicators with 1" of travel, digital indicators, or electronic probes.
|
|
Corning Tropel Corporation designed the UltraFlat 200 Mask System specifically for the photomask industry. It delivers the lowest measurement uncertainty for ever-tightening mask flatness specifications. Shrinking device features require not only flatter wafers, but flatter masks.
The UltraFlat system is used to measure flatness of photoblanks and photomasks throughout every stage of manufacturing and use, including, substrate polishing, coating and patterning to analyze film stress, and verification.
UltraFlat system utilizes near-normal incidence interferometry, rock solid structural design, state-of-the-art optical fabrication techniques and Tropel's renowned phase shifting analysis software to deliver 20 nanometer measurement uncertainty.
The system is NIST traceable and provides measurements that conform to SEMI standards. An automated photomask handling and measurement configuration is also available.
|
|
Solartron%u2019s Universal Block Gauge makes precision measurements a simple and reliable process within cavities, internal diameters and more generally when space is limited.
The Universal Flexure Gauge is a compact, frictionless parallelogram device that does not suffer from the wear usually associated with bearing systems
|
|
The measuring systems series MFE (metrology front end) is
particularly suited to manufacturers of structured wafers, masks,
MEMS and similar products. Because of the very high cleanliness,
process and yield requirements, all tools are especially designed
for use in cleanrooms.
MFE systems measure critical dimensions and overlays on the
one hand and 3D topography or film thickness on the other.
All tools are metrological and comply with the necessary industry
standards such as the SECS II / GEM software interface.
Furthermore, the system is fully automated and equipped
with wafer cassettes and part carriers.
An EFEM and mini-environment for class 1 cleanrooms
rounds off the upper segment of the MFE tool series.
|
|
Versatile system for geometrical measurements. Thoroughly proven reliability and user-friendly design make it easy for you to measure almost anything. Simply add laser transmitters and other accessories to suit your purposes.
Typical applications: Straightness, flatness, squareness, parallelism and spindle direction in machine tools, mechanical constructions, etc.
|
|
PRECISION MEASUREMENT & CONTROL SYSTEMS - PIPES & TUBES INDUSTRY
Beta LaserMike offers a complete line of process control instrumentation for the manufacture of products such as tube and pipe extrusions. Our systems offer varying levels of capability, utilize different measurement techniques, meet the needs of both on-line and off-line applications, and can be customized to fulfill your specific requirements.
* ID/OD/Wall Measurement
* Tolerance Checking
* Process Control
* SQC Graphical Interface
* Concentricity Measurement
* Weight & Throughput Measurement
* Non-contact Length and Speed Measurement
|
|
The MicroGlider® is the highly precise, multi-sensor platform
measuring system from FRT intended for especially accurate
measuring applications. A linear motor driven, non-contact
air bearing x-y stage guarantees best precision motion during
stage movement. Hence the MicroGlider® measures profile,
topography, roughness, and coating thickness with further
enhanced accuracy. The MicroGlider® is also equipped
with a CCD camera for easy sample positioning and can
automatically perform predefined measurements.
|
|
Alignment and measurement of straightness, flatness, perpendicularity and parallelism
The Fixturlaser Geo-series is a 1- or 2-axes alignment system for measurement, alignment and documentation of machine positioning. Typical applications are measurements of straightness and flatness on objects, such as machine tables, machine guides, rollers, or any component in your facility that requires high precision alignment and positioning.
The Fixturlaser Geo-systems are available with a series of different laser transmitters, receivers and fixtures for specific applications. All transmitters are interchangeable providing easy upgrade for future needs.
Optimized packages:
- Depending on the specific application, there are different packages with different laser transmitters and fixtures.
- Flatness measurements are performed in one axis.
- Straightness measurements are performed in one or two axes with up to 99 measurement points.
- Live values are displayed during adjustments.
- The measurements can be stored with individual comments to each measurement point for transfer to a PC or printed on the supplied printer.
|
|
Atomic Force Microscopy
Atomic Force Microscopes (AFMs) scan the surface of a sample using a very fine tip on the end of a microscale cantilever.
Atomic interactions between the tip and the surface lead to a deflection of the cantilever which is then detected by a piezoresistive element. Based on this effect, the AFM can measure the topography or roughness of a surface with very high resolution non destructively. The AFM can be used in different operating modes and thus allows for the investigation of further properties, such as electrical and magnetical forces or elasticity of a specimen.
|
|
General description
- Universal bore gauge for indicating bore gauging
- Modular design system with extensive range of accessories, enables gauging of most bores.
- Application range: Ø 0.47 mm to 41.3 mm/0.02" to 1.6" (in 3-point version up to 150 mm/5.9")
- Calibration in setting master
- Styles for blind bores (FB) and parallel distances (PA) included in standard programme
- Special designs on request
- Setting rings according to DIATEST company standard or to DIN 2250-C in standard programme
|
|
Grinding relief quality measurement of threads and chamfers on taps:
The measuring device RELIEF EXPERT is designed for precise measurement of the grinding relief of threads and chamfers on almost all types of straight and spiral fluted workpieces.
- taps
- thread formers
- thread milling cutters
|
|
Description:
Nowadays, the properties of surface topographies are increasingly influenced by new processing methods and new materials.
The traditional profile stylus method is often not adequate to characterize the functional behavior of surfaces. Three-dimensional recording and evaluation are required. Soft and thin-walled materials also require non-contact measurement.
Moreover, ever higher levels of surface quality are being achieved, greatly increasing the requirements placed on measuring systems in terms of resolution and measuring accuracy.
The MarSurf WS 1 satisfies all these requirements:
- Vertical resolution 0.1 nm (.004 µin)
- Three-dimensional measurement and evaluation in only a few seconds
- Compact measuring station configuration for the workshop and laboratory
- MarSurf XT 20 software
- Topographical evaluation software on the fully standardized and powerful MarWin software platform
|
|
ETA-ARC-AT: Capabilities and advantages
Cost reduction:
- Non-destructive measurement
- No roughening or blackening needed
- No witness piece required
- Measure the actual lens
- Contactless measurement -> no damage
Competitive advantage:
- 100% QC possible
- Check coating homogeneity
- Achieve perfect color matching
|
|
Features :
- Roughness and contour in a single stroke You need only half the time and your work is faster, more reliable and more efficient.With just one measurement, you have all the results for
roughness and contour characteristics at a glance. So you have more time for other things!
- State-of-the-art measuring technology for small tolerances. The integrated optical measuring system provides pinpoint accuracy over a broad measuring range and at maximum resolution. You can process jobs with low tolerances and thus tackle new challenges head-on.
- Innovative tracing arm concept for maximum stability The tracing arms, which have been designed using bridge-building techniques, ensure maximum rigidity, low-oscillation measurements and unwavering precision. So you can build your own bridges - to new dimensions of flexibility!
- Tracing arms with magnetic connection The magnetic mount ensures excellent system protection and a long service life.
|
|
Flexible in any direction, arm can be locked in position
The sleeves and grounded steel balls of the stem are compressed with a strong steel cable
Indicating instrument can be rotated through ± 90°
|
|
Corning is a leading, global supplier of optical materials, high performance precision optics, optical-based metrology instruments and technical microlithography solutions for the semiconductor industry. Its core technical expertise includes fused silica and fluoride crystals, materials and processing, optical-based metrology instrumentation and high performance optics through Corning Tropel®.
Recognized world-wide in precision optical subsystems and advanced form metrology instrumentation, Corning Tropel provides rapid, accurate full-form measurement of precision flat and cylindrical surfaces for the semiconductor, data storage, automotive and industrial markets. Custom-designed, high performance precision optic components enable applications for wafer, photomask and inspection equipment suppliers, and are designed for systems from ultra-violet (UV) to near infrared (IR).
Advanced Metrology Research and Testing Exceeds Customer Expectation
Our commitment to semiconductor metrology research and testing is significant and addresses an industry-wide need for precise performance and predictability over the lifetime of materials. Corning’s advanced interferometry equipment enables precision measurements and quality assessments that meet and/or exceed customer requirements for quality products and solutions. Our world-class manufacturing facilities, leading-edge metrology equipment and in-house lens-making capabilities, continues to be known for the exceptional quality, performance and reliability of its precision optics
|
|
The Shallow Probe model LEXFAB-300 is a turnkey system designed to meet the needs for fully automated semiconductor fab application and currently used for the 90nm, 65nm and 45nm nodes.
The LEXFAB-300:
- gives Elemental Concentration AND Thickness of thin films, layers or ULE implants.
- is designed for Product Wafer analysis (measurement area from 10µm to 100µm) including enhanced Pattern recognition.
- is fully compatible with SMIF 200mm, Open Cassette 200mm and FOUP 300mm standards. SECS/GEM automation.
- meets factory-required host communication protocols. Fully compliant with SEMI standards.
- provides Full Wafer Analysis and Mapping (concentration and thickness uniformity).
- is based on a Non-destructive technique.
- allows a high throughput.
- guarantees a high uptime, reliability and stability, ensuring documented long term tool matching.
- has an easy-to-use User Interface with dedicated recipes.
|
|
The GapGun is ideal for use in automotive, aerospace, white goods and transport industries. Gap Gun customers now also include automotive tier 1 applications, and the majority of leading aerospace companies.
The Gap Gun can be used:
Handheld, for offline or production line applications
Robot mounted or inline, using the same measurement head
The Gap Gun is extremely easy and fast to use, and measurement is fully automatic. Simply pull the trigger and move into range.
Contact sales@third.com for more information and a product specification,
or see our list of authorised distributors.
GapGun - Save Time, Save Money, Increase Accuracy
|
|
The ML10 Gold Standard laser represents the ultimate in calibration for machine tools, co-ordinate measuring machines (CMMs) and other position and motion critical systems. In combination with the extremely accurate EC10 environmental compensation unit, the system boasts ±0.7 ppm linear measurement accuracy.
The ML10 Gold Standard system can improve performance through targeted maintenance and can correct linear positioning errors using error compensation.
|
|
Precision sensors for fast, accurate acquisition of component dimensions and surface data.
The world's leading range of touch-trigger and scanning measurement systems for co-ordinate measuring machines (CMMs), plus the revolutionary Renscan5%u2122 5-axis scanning technology.
|
|
The CMS non-contact capacitive based hole and countersink measurement system has been established as the benchmark in measuring critical holes for military and commercial aircraft manufacturers around the world. Based on its ease of use, speed (measurement accomplished in a few seconds) and extreme accuracy ( /- 5 microns),
It has gained in popularity at various Airbus locations throughout Europe. The CMS system is particularly well adapted to the measurement of tapered holes based on its multi-sensor (48-sensor) approach to inside diameter mapping.
The addition of the CMS product line is a natural extension for Capacitec as they are currently the market leader in the supply of capacitive non-contact gap and displacement measurement sensor systems to the Aerospace market.
For further information, please contact :
Capacitec Europe
16 Rue Sejourné- 94044 Creteil – France
(33) 1 43 39 48 68
eurosales@capacitec.com
|
|
MEASURING PLUG FOR INSPECTING BORE DIAMETERS
M1 Star is a highly advanced line of measuring plugs developed by TESTAR, a MARPOSS division, for inspecting bore diameters.
The M1 Star MBG (Mechanical Bore Gauge) is the ideal manual instrument for precision measuring of inside diameter, ovality or taper.
|
|
|
