|
|
Description:
Nowadays, the properties of surface topographies are increasingly influenced by new processing methods and new materials.
The traditional profile stylus method is often not adequate to characterize the functional behavior of surfaces. Three-dimensional recording and evaluation are required. Soft and thin-walled materials also require non-contact measurement.
Moreover, ever higher levels of surface quality are being achieved, greatly increasing the requirements placed on measuring systems in terms of resolution and measuring accuracy.
The MarSurf WS 1 satisfies all these requirements:
- Vertical resolution 0.1 nm (.004 µin)
- Three-dimensional measurement and evaluation in only a few seconds
- Compact measuring station configuration for the workshop and laboratory
- MarSurf XT 20 software
- Topographical evaluation software on the fully standardized and powerful MarWin software platform
|
|
Atomic Force Microscopy
Atomic Force Microscopes (AFMs) scan the surface of a sample using a very fine tip on the end of a microscale cantilever.
Atomic interactions between the tip and the surface lead to a deflection of the cantilever which is then detected by a piezoresistive element. Based on this effect, the AFM can measure the topography or roughness of a surface with very high resolution non destructively. The AFM can be used in different operating modes and thus allows for the investigation of further properties, such as electrical and magnetical forces or elasticity of a specimen.
|
|
Features :
- Roughness and contour in a single stroke You need only half the time and your work is faster, more reliable and more efficient.With just one measurement, you have all the results for
roughness and contour characteristics at a glance. So you have more time for other things!
- State-of-the-art measuring technology for small tolerances. The integrated optical measuring system provides pinpoint accuracy over a broad measuring range and at maximum resolution. You can process jobs with low tolerances and thus tackle new challenges head-on.
- Innovative tracing arm concept for maximum stability The tracing arms, which have been designed using bridge-building techniques, ensure maximum rigidity, low-oscillation measurements and unwavering precision. So you can build your own bridges - to new dimensions of flexibility!
- Tracing arms with magnetic connection The magnetic mount ensures excellent system protection and a long service life.
|
|
The ML10 Gold Standard laser represents the ultimate in calibration for machine tools, co-ordinate measuring machines (CMMs) and other position and motion critical systems. In combination with the extremely accurate EC10 environmental compensation unit, the system boasts ±0.7 ppm linear measurement accuracy.
The ML10 Gold Standard system can improve performance through targeted maintenance and can correct linear positioning errors using error compensation.
|
|
Precision sensors for fast, accurate acquisition of component dimensions and surface data.
The world's leading range of touch-trigger and scanning measurement systems for co-ordinate measuring machines (CMMs), plus the revolutionary Renscan5%u2122 5-axis scanning technology.
|
|
The GapGun is ideal for use in automotive, aerospace, white goods and transport industries. Gap Gun customers now also include automotive tier 1 applications, and the majority of leading aerospace companies.
The Gap Gun can be used:
Handheld, for offline or production line applications
Robot mounted or inline, using the same measurement head
The Gap Gun is extremely easy and fast to use, and measurement is fully automatic. Simply pull the trigger and move into range.
Contact sales@third.com for more information and a product specification,
or see our list of authorised distributors.
GapGun - Save Time, Save Money, Increase Accuracy
|
|
- Base MA 175
- Co-ordinate table MA 145-15, range 150 x 70 mm with quick approach and fine adjustment
- 2 scales Heidenhain
- Counter Quadra-Chek 100 with digital display
- Projector MA 240EG, screen Ø 150 mm
- Detachable incident light illuminator MA 213-13V-100W
|
|
Leica T-Probe is a “Walk-Around” armless wireless probing device for probing of hidden, hard-to-reach points and measuring of up to 9 cars in one setup with minimal setup times, sets new standards by increasing accuracy, offering a ten-fold increase in point acquisition rate and providing user-assignable multi-function buttons
Small, light, user-friendly, and more accurate than any other hand-held probe in the world, the Leica T-Probe gives you more than 6 Degrees of Freedom: It gives you the right way to measure. Now featuring longer styli, Leica T-Probe reaches up to 30m (98ft) in any dimension.
|
|
“Ultimate geometry“
The Multivision optical measurement system has the same functionality as a traditional profile projector, with the
added advantage that it instantly provides all measures in one go.
Multivision can be installed onto machines or used on benches in lieu of a profile projector.
For instance, when used on spring formers, where spring types vary considerably, Multivision will dramatically
improve the quality of production.
Multivision is ideal for three-dimensional measurements for:
Compression, torsion, and tensile springs as well as several templates
The instrument consists of:
•one computer box capable of controlling 1 to 3 cameras
•1 to 3 cameras
•1 to 3 illuminators (front or rear mounted for profile reading)
•harness for individual camera Start, sorter operation, correction communication (where possible), and machine stop.
|
|
The MCV-2002 “Two interferometers operating at the same time” utilizes a dual beam laser head module to accomplish simultaneous linear and angular (pitch or yaw, straightness, flatness) calibration of axes on machine tools, CMMs, or X-Y tables as well as surface plates. The software enables the operator to automatically collect linear and angular positions simultaneously or angular data on the fly in accordance with various industry standards. Material temperature, air temperature and air pressure variations are automatically compensated. linear measurement range of 33-feet (10-m) with 1 microinch (10nm) resolution, and an angular measurement range of 16-feet (5-m) with 0.2-arcsec angular resolution. Optional ranges up to 200-feet (60-m) linear and 100-feet (30-m) angular are also available upon request..
|
|
Werth profile- and measurement projectors allow rapid comparison of drawings in the workshop environment and secondly, with the aid of the Werth %u201DTastauge%u201D first proposed by Dr. Werth in 1977, they can be used for highly-accurate and fully-automatic measurements.
Minimal distortion in the image field and calibration corresponding to VDI/VDE 2617 and/or ISO 10360 guarantee corresponding trace-ability of measurement values to the linear
standard of the Physical Technical
Federal Institute (PTB).
|
|
Compact Size Roundness Measurement Roundtest RA-114D:
- Space-saving machine with a built-in printer
- Friendly button layout on the main unit operation panel
Roundness Measurement Roundtest RA-1400:
- Powerful analysis performance in a compact body
- Allows also motor-driven auto-measurement.
High-accuracy Roundness/Cylindricity Measurement Roundtest RA-H5100:
- World's top class accuracy guaranteed
- High-speed auto-centering function installed
|
|
DYNAMOMETRIC CONTROL CONSOLE
Bench for periodic control of the torque wrenches or adjustment of the torque wrenches monocouples in tightening and loosening.
Aluminum body.
Precision: + 1% full scale.
Broad dial (diam 200 mm) tilting with great legibility of scale
Following needle for memorizing of the maximum value
Interchangeability of the bushes of adaptation for the various driving squares of the wrenches.
graduation Nm by Nm.
|
|
EDIXIA proposes a wide range of inspection solutions at each step of the assembly process of vehicles or their sub-assemblies:
GapRange gap and flush measurement
GeoRange for vehicle geometry
According to the constraints of the automotive production line, these products are declined in more or less flexible and dynamic version.
Major benefits
-Productivity gains
-Improvement of perceived quality of your vehicles
-Rationalization of your excellence guarantee tools 100% and contact less inspection
Reliable measurements with a high repeatability
1 unique system to analyze all points
Discover our products
GapRange
GeoRange
|
|
|
Crane Electronics, the market leader in torque control products, has devised a Torque Test Bench which enables manufacturers to test their mechanical wrenches and automatically document the results of these tests. Removing the need to record the readings and calibrations on paper can lead to considerable savings in man hours during a shift.
|
|
To control the quality of your manufacturing, you need the best tools for the job. And to control costs, you want the best value for your money. The OGP® Focus™ Contour Projector® definitely meets both requirements.
Focus is a rugged benchtop unit with a 14" viewable screen diameter. Its extensive list of standard features makes Focus best in class.
A range of options makes it easy to configure Focus for your specific requirements. Choose a single magnification manual system for quick checks or fill the internal turret with magnification lenses you use most. Add the joystick controlled motorized worktable for fully automated CNC operation. Projectron™ automatic edge detection, and SmartCheck® metrology software are other popular options.
|
|
| ... products without technical information |
| |
|
|
