worm gear / hub
worm gear
A1 series

spur gear / hub / custom
spur gear

The custom gear is manufactured by Tiny Clutch, and is available in broad range of models with teeth of 18T to 109T. It is available in pitch ranging from 24 to 48, which has a pressure angle of 14.5° or 20°. It has ...

internal gear / hub / brass
internal gear

internal spur gears are straight geared with a pressure angle of 20 degrees. material brass gun and tempered steel C45 steel ETG100

conical gear / hub / stainless steel
conical gear

The bevel gears are machined on all sides and straight or helical geared and are delivered with a bore. Grooves according to DIN 6885/1 are available on request. The tooth quality complies with DIN 3967 ...

worm gear / hub
worm gear
ø 30 - 120 mm

Worm gears for manufacturing simple worm gear drives. Center distances of 30 120 mm. Other center distances available on request. the following elements are available: worm ...

round gear / hub / chain
round gear

The small chains are available on request with various plates. Plastic chains have only 15-20% the weight of steel chains and require no lubrication. They are fully exchangeable with ANSI standard chains. Resistant to many chemicals ...

helical gear wheel / hub / steel
helical gear wheel
24 series

Fast and quiet running gears are manufactured of highquality case-hardening steel and are completely casehardened. Their straight involute teeth are ground to grade 6 in accordance with DIN 3962/63. Technical Datas: Module ...

See the other products
Atlanta Neugart France
helical gear wheel / hub
helical gear wheel
21/23 series

... engineering sector. Technical Datas: Module 1 to 12 Material C45 Mat.no. 1.0503 Straight and helical toothed, left-hand 19°31’42" Gearing grade 8

See the other products
Atlanta Neugart France
helical gear wheel / hub / ground / with ground teeth
helical gear wheel
78 series

... according EN ISO 9409-1-A are bored and can be mounted directly on the gearbox (ATLANT HT-high-torque servo gear box) Technical Datas: Module 2 to 5 Material 16MnCr5 Mat.no. 1.7131 Gearing ...

See the other products
Atlanta Neugart France
helical gear wheel / hub / transmission
helical gear wheel
79 series

Gears with spline profile according to DIN 5480 are designed to transfer the torque from the output shaft to the shaft hub connection. The mounting of these gears will be done with a washer and a screw ...

See the other products
Atlanta Neugart France
straight-toothed gear wheel / hub / plastic / resin
straight-toothed gear wheel
22 series

ATLANTA plastic gears are used for simple applications that are exposed to certain environmental influences, or in which lubrication is not needed. Technical Datas: Module 1 to 3 Material acetal resin (Delrin) Gearing ...

See the other products
Atlanta Neugart France
helical gear / flange
helical gear

The modern TR flanged pinions are created as per the ISO 9409-1-A requirement and enable the equipment architect with the versatility of selecting the appropriate flanges pinion for fulfilling the specific application requirements. Its ...

spur gear / flange / custom
spur gear

Custom ring gears and curved racks are offered by ATLANTA Drive Systems, Inc to complement the company’s line of standard rack and pinion drives. The custom racks and gears can be produced with different ...

helical gear / straight-toothed / shaft
helical gear

Spur Gears - Product Range: Spur Gears Ground, Straight & Helical Spur Gears Milled, Straight Spur Gears Milled, Helical Spur Gears Milled, Straight; ...

straight-toothed gear / flange / custom-made / tree
straight-toothed gear

Spur Gears - Custom Made Parts: Acc. to drawing and customer requirement, we manufacture spur gears, pinion shafts and gear rims in numerous designs: Spur Gears & ...

conical gear / shaft / tree
conical gear
i = 1:1 - 1:6

Bevel Gears - Stock Programme: Bevel Gears, straight teeth Pressure angle 20° Shaft angle 90° With crowned tooth bearing Material: 1.0503 [C45] Ratio i: 1:1 - 1:1,5 - 1:2 - 1:2,5 - 1:3 - 1:4 Bevel ...

conical gear / hub / custom-made
conical gear

Bevel Gears - Custom Made Parts: Our manufacturing capabilities for bevel gears to suit your individual requirements: Spiral Bevel Gears - Max. diameter 2 000 mm - Modules up to 33, ...

conical gear / shaft
conical gear

conical gear / hub / custom / tree
conical gear
i= 1:1 - 2:1, max. 2 300 Nm

These Bevel Gear Sets are made specifically in spiral-toothed designs. They are made from high quality standards and supplied from stock. These are enclosed within a housing to avoid excessive sagging of the shafts during ...

worm gear / shaft
worm gear
i= 5:1 - 83:1, max. 10 500 Nm

This worm gear sets from Atek is designed for applications where series-fabricated gearbox is not needed. These sets' principle is suitable for coping with minimal adjustment errors in assembly, without ...

cylindrical gear / hub / steel
cylindrical gear

See the other products
PRUD'HOMME Transmissions
spur gear / hub / stainless steel
spur gear

See the other products
PRUD'HOMME Transmissions
helical gear / hub / brass
helical gear

See the other products
PRUD'HOMME Transmissions
conical gear / hub
conical gear
zamac

See the other products
PRUD'HOMME Transmissions
spur gear / hub / plastic
spur gear

See the other products
PRUD'HOMME Transmissions
straight-toothed gear / conical / hub
straight-toothed gear
Type A

See the other products
BEA Ingranaggi
straight-toothed gear / conical / hub
straight-toothed gear
Type B

See the other products
BEA Ingranaggi
helical-toothed gear / conical / hub
helical-toothed gear

See the other products
BEA Ingranaggi
cylindrical gear / straight-toothed / hub
cylindrical gear
Mod.1

Length: 15, 25 mm
Diameter: 14 mm - 129 mm

See the other products
BEA Ingranaggi
cylindrical gear / straight-toothed / hub
cylindrical gear
Mod. 1,5

Length: 30, 17 mm
Diameter: 21 mm - 193.5 mm

See the other products
BEA Ingranaggi
straight-toothed gear / shaft / tree
straight-toothed gear

OTT Worm and worm wheel: Driving rotation components for various applications requiring an high degree of accuracy, an high torque transmission and that without any back lash. CHARACTERISTICS The OTT ...

magnetic gear
magnetic gear
magnetic gear

Sintex® - Magnetic Gear Sintex’ magnetic gear is an innovative solution designed to transmit power in challenging applications. It is based on a unique design, which offers a robust and efficient ...

hypoid gear / helical / conical / shaft
hypoid gear
i = 1:1, 90°

Davall Gears manufacture Gleason SPIRAL BEVEL (helical bevel) gears, HYPOID gears and STRAIGHT TOOTH BEVEL gears (Gleason "coniflex"). We can manufacture mitre 1:1 (one ...

See the other products
Davall Gears Limited
spiroid gear / flange / zero-backlash
spiroid gear
i= 5.6:1 - 360:1 | Spiradrive®

Davall Gears are the global specialist in the design and manufacture of spiroid gears, under the trade name Spiradrive, the high torque, high tooth contact ratio, high ratio (single stage) gearing ...

See the other products
Davall Gears Limited
straight-toothed gear / flange
straight-toothed gear
i = 1:1, 90°

Davall Gears can produce gears with a straight (spur) or helix (helical) tooth, wether a complete gear or as a segment. We can supply gears to varying grades and qualities, ...

See the other products
Davall Gears Limited
internal gear / helical / hub / for gear wheels
internal gear
ø 400 mm

Davall Gears design, prototype and manufacture single or multi stage planetary drives, employing straight or helical tooth form. We can produce annulus (internal) gear ring to a diameter of 400mm. We ...

See the other products
Davall Gears Limited
hub gear / ground / wheel
hub gear
90°

Davall Gears produce conventional ratio worm and wormwheel transmission parts. We can manufacture the worm gear plain turned, polished or hardened and ground and the wheel in same or ...

See the other products
Davall Gears Limited
internal gear / flange
internal gear

Heavy duty friction materials. Gear Rings for Clark Transmissions. Bolt and Stud Fixing Kits available for Clark Rings.

spiroid gear / flange
spiroid gear

... Sears are members of the skew-axis gear family. SPIRSIN gear sets consist of two members: pinion and gear. The pinions are tapered. SPIRSIN gears set center distance ...

spur gear / conical / custom
spur gear

Length: 2'00" ft - 12'00"
Diameter: 20 mm - 48 mm

Browning offers a comprehensive line of off-the-shelf gears, including spur, miter, and bevel, as well as change gears. These are available in 20º pressure angle from 20 to 4 diametral pitch and 14 1/2º ...

conical gear / hub / custom
conical gear

Vogel gear manufacturing offers production of sketches, drawings, and patterns right from a single item to serial production. The respective calculations are performed on request.

helical gear / spiral / spiroid / conical
helical gear

... and Pyrowear X-53, and nitriding steel for its gears. Additionally, various processes are used for surfaces which prevents fatigue, wear and corrosion by lowering the friction. All gears need to ...

spur gear wheel / hub / POM
spur gear wheel
104002500005

Gear Type :Spur Face Width :15.0 mm Bore Diameter :12.0 mm Number of Teeth :35 Hub Width :12.0 mm Hub Diameter :24.0 mm Outside Diameter :35.0 mm

cylindrical gear / straight-toothed / conical / for the aerospace industry
cylindrical gear

... quality initiatives allows us to continuously deliver superior and reliable products. Our specialty is to produce ground gears and gear assemblies to precise geometric tolerancing to customer and Aerospace ...

See the other products
MIJNO
straight-toothed gear / helical-toothed / cylindrical
straight-toothed gear

Diameter: 5 mm - 400 mm

See the other products
MIJNO