|
|
Type
FPW425A2- J
Series
Watertight motors with IP67 (FPW-Series)
Technical data
Type
FPW425A2- J
Frame size [mm]
83
Output power [W]
25
Gear ratios [1:x]
3, 3.6, 5, 6, 7.5, 9, 12.5, 15, 18, 25, 30, 36, 50, 60, 75, 90, 100, 120, 150, 180
Rated speed for 50 Hz/60Hz [r/min]
500-8.3/600-10
Max. permissible torque for 50 Hz/60 Hz [Nm]
0.5-8/0.41-8
Protection class
IP67
Power supply
single-phase 100 VAC
RoHS-compliant
yes
|
|
|
|
|
|
Fine Cyclo® series for point-to-point applications
FC-A
Standard unit without bearing support on the output flange
F1C-A
Drive with output side cross roller bearing
F2C-A
Drive with output flange and integrated tapered roller bearing
Option: F-flange housing
F3C-A
Drive with output flange and tapered roller bearing
All FA types in 4 to 6 sizes
* Gear ratios 29:1 to 179;1 single-stage
* Rated torque up to 5,140 Nm
* Acceleration torque up to 7,610 Nm
F2C-C & F2CF-C
Hollow shaft drive, e.g. for cable bushing, with drive shaft running on bearing, in totally sealed design in 5 sizes
All FC types in 5 sizes
* Gear ratios single-stage 59:1, 89:1, 119:1
* Rated output torque 412 to 3,139 Nm
* Acceleration torque up to 6,278 Nm
* Hollow shaft dia. 49 to 99 mm
Fine Cyclo® series for path controlled applications
F2C-T & F2CF-T
With optimized curve profile, integrated tapered roller bearing and high torque
Option: F-flange housing in 7 sizes
All FT types in 7 sizes
* Gear ratios from 81:1 to 171:1
* Rated torque up to 6,140 Nm
* Acceleration torque up to 11,000 Nm
Advantages:
* Low hysteresis loss for precise positioning
* Compact design
* High torsional rigidity
* Low mass moments of inertia
* High overload capacity
* High efficiency
* Simple fitting and motor fitment
* Clamp ring design possible for motor fitment without key
* Lifetime grease lubrication for any installation position
|
|
Voltage: 230 V (Supply Voltage Electronic Controller)
Frequency: 50 or 60 Hz
Power: 60 - 500 Watt
Motor Speeds: 1300, 2000, 3000 min-1
Type of protection: IP 54
Ratios:
Type 12 - 5:1 up to 55:1
Type 13 - 5:1 up to 56:1
Type 14 - 6,75:1 up to 60:1
|
|
High torque, excellent true running, low speeds
Brushless, electronically commutated permanent-
magnet motor.
3 sizes: 5, 7, 8
EK 501 to EK 803
6 sizes: 2, 3, 4, 5, 7, 8
ED 202 to ED 808
Gear sizes: P2 – P9
Accelerating torque:
18 – 3,000 Nm
Gear ratio range: 3 – 100
Backlash: < 3 – 8 arcmin
|
|
SL Series brushless servo-gearmotor
Frame Size 2 – 4.5 inches, 51 – 114 mm
Maximum Continuous Torque Rating 4696 lbf-in, 531 Nm
Maximum Motor Speed 5000 rpm
|
|
|
|
|
|
The HygienicDrive™ was designed especially for use in the food and beverage industry. Its compact construction predestines it for attachment to transport and conveyor systems.
Features and benefits
Product range
Power rating 1,5 - 3,0 kW
Main features
* IPA and EHEDG certified
* Optimised bevel gearing
* Special geared motor design for optimum hygiene
* Permanent magnet three-phase synchronous motor; Super Premium Efficiency (higher IE3)
* High system efficiency
* High overload tolerance
* Completely smooth housing, preventing the accumulation of dirt and ensuring easy cleaning
* High protection, class IP67 and IP69K
* Motor und encoder connection with Danfoss stainless steel circular connector CleanConnect®; protection class IP67 and IP69K
* Motors without cooling ribs and fan, thus producing a measurable reduction in 'airborne germs'
* Paintwork resistant to cleaning solutions and disinfectants, with special coating. Surface coated with FDA-listed finishes
* Optionally available with Aseptic Antibac® antibacterial finish
* Available hollow shaft diameters: 25, 30, 35 and 40 mm
|
|
A range of 12 to 180 Volt DC Motors with power outputs of 25-750W, available alone or in combination with a wide range of right angle and in-line gearboxes.
MOTORS
PM36 Custom permanent magnet motors up to 75 watts
PM45 Custom permanent magnet motors up to 250 watts.
PM55 Custom permanent magnet motors up to 300 watts.
PM62 Custom permanent magnet motors up to 500 watts.
GEARBOXES
G30 Custom non declutch right angle gearboxes to 11Nm torque.
G34 Custom declutch right angle gearboxes to 40Nm torque.
G46 Compact right angle gearboxes to 20Nm torque
G46M Compact right angle gearbox specifically for heavier duty mobility applications.
G63 Compact Hi-Duty right angle gearboxes to 25Nm torque.
G120 In-line gearboxes to 30Nm torque.
IMS In-line gearboxes to 120Nm torque
minimum order quantity: 100 units per annum
|
|
|
Venture has a variety of gearboxes available, both motorized and manual. Many are customizable to suit your specific need. If we don't have exactly what you need contact us and we will be happy to investigate making a custom unit for your specific application.
|
|
GPG Series Gearmotors
A compact, lightweight and durable motor gearbox combination, the GPG series provides a high quality, low cost solution to suit a vast array of applications.
To provide maximum selection flexibility, 5 alternative gear ratios are offered as standard for each of 3 motor-gearbox models to suit 12, 24 or 36V rated voltages.
PML flat armature, ironless disc motors as used in applications worldwide, are renowned for their low inductance, zero spark, exceptional brush life. These qualities also ensure excellent EMC properties.
The GPG Series motors can be linked to PMA or PMC Drives
|
|
Electrical drives and couplings
Our range includes AC/DC linear drives, DC motors, AC/DC servo drives and frequency inverters. The range of couplings includes torsionally flexible and torsionally rigid couplings.
DC gear motor A+P with worm gear pair, 12 V DC
DC gear motor A P with worm gear pair, 24 V DC
|
|
DC motors up to 500W
Heidolph DC motors are compact and robust. Field loss is eliminated since field excitation of the motors is achieved by the use of permanent magnets achieving a high efficiency. The motors have an excellent dynamic response due to small mass moments of inertia.
Overview
Type 350 351 352 353 354
Power P2[W] 45 100 150 300 500
Voltage[V] 24 24 24 24 180
Nominal torque[Nm] 0.143 0.32 0.48 0.96 1.6
Nominal current [A] 2.6 5.54 8.33 15.6 3.3
|
|
|
High quality 3 pole 12mm ferrite motor with a spur gear open gearbox, steel geartrain and sintered bronze bearings. The double shaft unit features an ungeared extended shaft protruding from the motor case. This is suitable for mounting encoders or other drive components for feedback control or actuation. Used by modellers for animating static displays, robotics enthusiasts, and industrial actuators (e.g. locking mechanisms). Originally designed for focusing rings on professional video cameras.
|
|
GM Series
GM12
10mm x 12mm 6V or 12V DC gearmotor, available in five gear reduction ratios. 30:1, 63:1, 100:1, 210:1 and 298:1
|
|
Technical Description. Motor casing: Deep drawn, corrossion protected. Excitation field: Permanentmagnet. Method of bearing, A-side: Ball bearing, sleeve bearing optional. Method of bearing, B-side: Sleeve bearing. Gear: Worm gear.
Gear housing: Aluminium die cast. Gear wheel: plastic. Gear greasing:
Lubricant/permanent lubrication. Mechanic interface: Output shaft. Electric interface: Connector.
|
|
Voltage: 180 V DC, 24 V DC
Power: 40 - 350 Watt
Motor Speeds: 2000, 3000 min-1
Connection: flying leads or terminal box
Type of protection: IP 44 or IP 54
Ratios:
Type 12 - 5:1 up to 75:1
Type 13 - 5:1 up to 56:1
Type 14 - 6,75:1 up to 80:1
|
|
Length "L" of the gearmotor as a funtion of reduction and outlet number of revolution with the standard motor
735 13 output W 4700 Rpm loadness, 24 Vdc. Outlet shaft is supported by two coupled screened bearings.
The motor has an electrical suppressor system for the CE standard.
The motor and the reduction gear are both plated for corrosion strength.
* The speed rotation can change of ± 10%.
The S1 load test was made using a 1, A corrent in the air with an increase of temperature of 70° C.
The S2 load test was made using a 1,6 A corrent in the air with a timing 5` ON 5` OFF with an increase of temperature
of 80° C max. The starting corrent is 4 A and cannot be mantained for more than 2".
Max forces which may act on the outlet shaft: Axial 10 kg, Radial 15 kg on the extremity of outlet shaft.
It is possible to apply an encoder.
|
|
|
Planetary drives and gearboxes with rotating cases for the movement of wheeled or tracked vehicles. Available with static negative disc brakes, freewheel options and valves. Transmissible torques range from 80daNm to 370 daNm, radial load capacity up to 8000 kg.
|
|
• 4 sizes for torques up to 600 Nm
• speed up to 193 rpm
• compact design
• integrated encoder or potentiometer (option)
|
|
MSF Series worm geared Motors
Worm gear speed reducers type SF – MSF are a new generation of prtoducts developped by our company. They are characterized by a kinematic motion composed of a casehardened and tempered steel worm with a ground thread and a wheel made out of a spheroidal graphite cast iron hub with addition of bronze.
|
|
Atex
GST helical gearbox (geared motor)
GFL shaft-mounted helical gearbox (geared motor)
GKR bevel gearbox (geared motor)
GKS helical-bevel gearbox (geared motor)
GSS helical-worm gearbox (geared motor)
AC geared motors
Lenze offers drive solutions for use in potentially explosive atmospheres. Users have access to an extensive range of geared motors for ATEX categories 2GD and 3GD (gas and dust).
|
|
A tough little gearmotor that delivers a powerful punch in the fight for productivity.
With local availability, NEMA/IEC compatibility plus drop-in replacement, the Falk Ultramite is a real champ.
It's a winning combination. Start with a compact size that's the perfect fit for the .25HP/.25KW through 20HP/15KW power range. You can choose a standard plug-in high-efficiency NEMA/IEC motor from stock for an easy bolt-up mounting to the gear drive. Add positive torque transfer without corrosion or fretting, energy efficiency over worm gear drives and quick availability no matter where you're located-and you've got the Falk Ultramite, a genuine contender in the fight for increased factory floor productivity.
What's more, the Ultramite is backed up by Rexnord, a global leader in the gear drive and coupling industry. It's got the right size, the right statistics and the right name. The Ultramite-it delivers just the right punch.
|
|
|
|
|
|
Sumitomo Cyclo drives are unique and are still unsurpassed where drive technology is concerned. The Cyclo drive is superior to traditional gear mechanisms, since it only operates with rolling force and is not exposed to shear forces. By comparison with gears with contact loads, Cyclo drives are more resistant and can absorb extreme shock loads by means of uniform load distribution over the power transmitting components. Cyclo drives and Cyclo drive geared motors are characterized by their reliability, long service life and outstanding efficiency, even under difficult conditions.
Features
* High overload capacity, extreme shock load
* Long service life
* High efficiency
* Compact design
* Available as geared units and geared motors
* Ideal for operating under difficult conditions
* Lifetime grease lubrication on some sizes
Sizes: 34 models
Torque Rating: 7.2 to 68,200 Nm
Power Rating: 0.12 to 55 kW
Ratio Range: 6:1 to 119:1 (single), 104:1 to 7,569:1 and larger (multi-stage)
Mounting: horizontal or vertical (power takeoff facing up or down)
Motor Standards: NEMA, IEC, JIS, UL, CSA, CER
|
|
The new G²Drive range of geared motors opens up new applicational possibilities. And that three times at once:
- Up to 25% shorter installation length due to the optimal connection of motor and gearbox
- Up to 20% less weight due to shorter installation length
- Up to 20% less costs - your advantage over the competition
In addition, two different gearbox versions widen your constructive flexibility. With an angled and a planetary gearbox, nothing can get in the way of your ideas any longer.
|
|
STRÖTER - Helical bevel variable speed gears Type A are characterized by the following features:
-speed range 1 : 10
-adjustable during motion and standstill
-fitted with IEC standard motors
-exceptionally quiet running
-fine control of speed range
-long life
-entirely enclosed
-easy to maintain
STRÖTER Helical bevel variable speed gears
-Range of power 0,09 – 1,5 kW
Optional extras*:
-Torque arm
-Bolt on feat
-Fixing- and forcing element
-Remote speed indicator (digital or analogue)
-Electrical remote adjustment
-Remote adjustment with flexible shaft
-Bevel gear adjustment
-2nd motor shaft
-Brake motors
-Pole changing motors
-Explosion proof motors
-Special voltage / frequency
Type of protection IP 56
-Insulation class F or H
-PTC Thermistor or temperature switch
* special price
|
|
|
Grove Gear offers a lightweight alternative to both cast iron worm and coaxial (inline) helical gear reducers. Although there are pros and cons to cast iron and aluminum, one application might strongly lean toward cast iron where another may require only aluminum construction. The Grove designed aluminum gear reducers have some very distinctive advantages including: lightweight and compact construction, lower purchase and shipping costs and extreme mounting flexibility. In addition, the paint-free exterior of Grove aluminum reducers makes them a perfect solution in many applications, including washdown; food, chemical and pharmaceutical processing.
|
|
|
|
|
|
AC gearbox/geared motor
Lenze AC geared motors are ideally suited to constant speed applications with supply of 50 or 60 Hz, as well as to operation with frequency inverters. In conjunction with the starttec motor starter, they can be used to perform demanding decentralised drive tasks.
GST helical gearbox/geared motor
The excellent performance of these 3 and 4-stage integrated right-angle gearboxes sets them apart. Thanks to the robust cast iron housing, high permissible torques and closely stepped speed reduction ratios, they can meet even the most stringent of requirements.
The gearboxes/geared motors are used in the following areas:
– Materials handling technology, logistics, transport
– Industrial handling
– Packaging technology
– Building materials industry
– Stage machinery
Drive-end versions
– Integrated three-phase AC motors
– IEC motor adapter
– Free shaft input
Output-end versions
– Hollow shaft with keyway or shrink disc
– Solid shaft with keyway
– Foot or flange mounting
– Torque plate with rubber buffer
|
|
Technology basket gearbox motors
From the component assemblies in the gearbox basket helical, flat, worm and planetary gears are produced. The following examples show the available expertise in delivering solutions.
Helical gearbox motor:
* axis height 71 to 315 mm
* output torque 30 to 6000 Nm
* speeds from 2 to 750 rpm
Flat gearbox motor:
* output torques to 2500 Nm
* speeds from 3 to 220 rpm
* reduction 6 to 250
Worm gearbox motor:
* output torques to 300 Nm
* reduction to 250
|
|
¡´Gear Reducer Motors TOP
Type Code: ERHE /ERTH (Foot Mounted)
ERHY / ERTN (Vertical Mounted)
ERHZ (Double Shaft)
Output 1/4 ~ 75 HP
Pole (Speed) 4, 6
Voltage below 600V
Frequency (Hz) 50, 60
Gear Reducer Frame Size 25 ~ 115
Protection Enclosure IP 54
Reduced Ratio 1/5, 1/10, 1/15, 1/20, 1/30, 1/40, 1/50, 1/60, 1/75, 1/90, 1/100, 1/120, 1/150, 1/180
|
|
PR+MSF worm geared motors with pre-stage helical units.
Worm gear speed reducers type SF-MSF are a new generation of products developed by our company.
|
|
|
|
