|
|
Planetary Gearheads
Noiseless, gearheads with maximum noise reduction Focus, with minimum circumferential backlash
Performax®, the milestone in gear engineering (patent pending) with its high performance and extreme smoothness
Performax® High Radial Load, the downstream development from the Performax® series for major radial loads and smoothness not restricted
by radial loads
|
|
Compact, and yet extremely powerful, are the units of the 300 series. Their planetary drive train makes them the ideal choice for all the severe duty applications where shock loadings and impacts are more the rule than the exception. The product configuration is highly versatile, due to several options as far as the mounting, the gear layout, the output shaft and the motor interface. All the features are available for each of the 16 finely spaced frame sizes, spanning over the 1.000 - 450.000 Nm torque range. Finding the perfect match to any drive problem is therefore more than a wish, it is something users can safely rely on - always.
|
|
Planetary Gearheads
Noiseless, gearheads with maximum noise reduction Focus, with minimum circumferential backlash
Performax®, the milestone in gear engineering (patent pending) with its high performance and extreme smoothness
Performax® High Radial Load, the downstream development from the Performax® series for major radial loads and smoothness not restricted
by radial loads
|
|
Series C Right angle helical worm geared motors and reducers provide a highly efficient and compact solution to meet most requirements up to 45 kW with maximum output torque capacity of 10,000Nm.
Product Specification:
The Series C product adds to the growing family of new drives which has taken advantage of our many years of accumulated design expertise, together with the use of high quality materials and components. The end result is a series of speed reducing and geared motors offering high load carrying capacity, increased efficiency, quiet running and reliability.
- Unit Sizes: 03, 04, 05, 06, 07, 08, 09, 10
- Input Power: Up to 45kW (60HP)
- Output Torque: Up to 10,000Nm (88,500 lb.in)
- Gear Ratios: From 8:1 to 250:1 in a double unit and 60,000:1 in combined units
- Motor Sizes: IEC Frames from 63 to 225; NEMA Frames from 56 to 326
|
|
BISON 756 SERIES
The 750 Series line of hollow shaft gearmotors allows hundreds of mounting configurations enabling engineers to optimize their assemblies. Industry standard mounts are available for drop-in requirements, and a hollow shaft style is available to use with optional accessories to meet your specifications.
|
|
|
BISON GEAR 746 Series Right Angle DC Gearmotor. Available in right or left hand orientations. Base mount - any angle. Reversible rotation, replaceable brushes. PMDC motor, TENV lifetime oil bath, sealed and gasketed. Available in 1/15 Hp. Max torque of 68 in-lbs
|
|
Permanent magnet DC gear motors :
* AOMPI40 :
APPLICATION :
brush motor traction for trolleys, welding machines, small vehicles, golf, etc.
FEATURES :
Type of motor mounted: permanent magnet
Gearbox: steel worm and worm gear rolled or rectified with plastic or bronze gear
Reduction ratio: 12/1 - 18/1 - 37/1 - 65/1
Power up to: 200W
Electromagnetic brake available
* MRP4 :
APPLICATION :
brush motor traction for small vehicles.
FEATURES :
Type of motor mounted: permanent magnet
Gearbox: parallel axis with steel gears
Max diameter exit axles: 20 mm [0.78 in]
Axles material: AISI 303
Power up to: 200W (MP56) - 600W (MP80)
Electromagnetic brake available
|
|
Torque Range
100 Nm... 14.000 Nm
Mechanical Rating (n1= 1400 min-1)
0,22 ... 150 kW
Gear ratios
5,4 ... 1715
Output Configuration
Foot and Shaft mount - Two Bore Options per Size
Keyless Shrink Disc Fitting
Metric or Inch series Solid Output shaft
Taper bushings matching more shaft diameters
Splined hollow shaft to DIN 5480
Input Configurations
IEC and NEMA motor Adaptors
Servomotor adapters
Metric or Inch series Solid Input Shaft
Applicable AC motors
Integral motors and Brake motors - M series
IEC-normalized Motors and Brake motors - BN series
Single and Dual Speed Motors
Main Brake Features
DC and AC supply
Faster Brake Engage/Disengage through Electonically
Controlled AC/DC Rectifier type SB, NBR, SBR (options)
Main Motor Options
Thermistors and Thermostates sensor
Separate Supply Forced Ventilation
Line Driver and Push-Pull Incremental Encoder
|
|
Slightly after the market introduction of the gearboxes RX 800 line the bevel helical series RX 700 is now ready to be launched as a natural complementary range covering the low powers of a product line used as a market reference for longer than 40 years.
Sturdy monolithic housing with multiple fixing and connection positions, gears widely oversized and overrated as well as many accessories and optionals making it a strong and realiable product.
|
|
Varvel continues to score successes in its product range completion with the new hollow output shaft speed reducers 'Series RN-RO-RV'.
Each size of this new series - displayed at the former Hannover Fair, April 2007 - is designed with a common base body that gives rise to three different speed reducer lines by the means of the appropriate input module fitting: RN shaft mount, RO horizontal and RV vertical input bevel/helical.
Speed reducers are designed in six sizes - aluminium pressure die cast for the smallest three and grey cast iron for the bigger ones - with 30 reduction ratios in two and three stages, and output torques from 180 Nm to 3200 Nm.
Multiple foot-, flange- or torque arm mountings are available as well as hollow output shafts (keyed, shrink-disk, splined) and solid simple or double sided.
Same fixing footprint for the three versions, high flexibility, easy mounting and quick lead times are the pluses that make the speed reducers RN-RO-RV a really new and advanced range.
|
|
|
The Hyponic geared motor is based on 60 years of experience in the development and manufacture of gear and drive solutions. To date there are over a million Hyponic geared motors in service. The latest generation is characterized by a more compact design, a modular system, maintenance-free operation and universal installation positions. With the IP65 (wash down) option, the Hyponic is an ideal solution for beverage bottling plants and food manufacture. Hypoid gearing technology in case hardened steel, patented by Sumitomo, provides high efficiency and is far superior to the customary worm gears due to gear ratios from 5:1 to 1440:1. The Hyponic gear combines the cost advantages of the worm gear with the technical characteristics of a bevel gear.
|
|
No better, easier and neater installation than with a shaft mounted unit of the F series. Lightweight and performing, an F unit is the dependable drive for all the material handling applications.
|
|
The units are also available with rubber torque bushes, output flanges, output shafts and KIBO® sleeves to allow for trouble free maintenance. All variants can be fitted with standard IEC motors. Input shaft assemblies are available up to and including F10.
* Unit Sizes: 02,03,04,05,06,07,08,09,10,11,12
* Input Power: Up to 110kW (147HP)
* Output Torque: Up to 16,500Nm (146,000 lb.in)
* Gear Ratios: From 5:1 to 100:1 in double reduction form and in combined unit form up to 5,600:1.
* Motor Sizes: IEC Frames from 63 to 225
|
|
|
Simple and yet powerful is the S series, developed for the pump industry as well as the fan and blower application. Foot and flange mounted, with shaft dimensions to the UNEL standard.
|
|
|
|
|
|
Conventional DC motors use a stationary magnet with a rotating armature combining the commutation segments and brushes to provide automatic commutation. In comparison, the brushless DC motor is a reversed design: the permanent magnet is rotating whereas the windings are part of the stator and can be energized without requiring a commutator-and-brush system. Therefore this motor type achieves very long, trouble-free life even while operating at very high speeds.
Key Attributes:
- Frame sizes range from 12.7 mm (0.5 in.) to 58mm (2.3 in.)
- Speeds up to 100 000 rpm
- Torque range of 3.3 mNm (0.32 oz. in.) to 316 mNm (44.7 oz. in.)
- Speed, direction, current control option are available
- Autoclavable features available
- Versions without hall sensor
- Versions with hall effect sensors
Characteristics:
- Essentially Linear torque/speed curve, with torque proportional to current and speed proportional to voltage
- No mechanical commutation via brushes
- Improved heat dissipation
- No detent torque
- Tipically used in application with variations of speed or load
- Typically used in incremental motion
Advantages:
- Ease of speed and position control
- Very long life, high reliability, insensitive to environment (no arcing), motor is dust free with reduced audible and electrical noise levels
- Overload capability
- Excellent velocity smoothness
- Very simple commutation circuitry
- Very precise speed and position control
|
|
The Series K geared motor is designed with integral cast feet for base or end mounting and can be offered with single or double extended output shafts. Units are also available shaft mounted or with output flanges and are available for mounting horizontally or vertically. The units can also be offered with a bolt on torque reaction bracket and all variants are available either motorised or with an input shaft assembly.
* Unit Sizes: 03, 04, 05, 06, 07, 08, 09, 10 and 12
* Input Power: Up to 90 kW (121 HP)
* Output Torque: Up to 12,300 Nm (109,000 lb.in.)
* Gear Ratios: Up to 160:1 in three stages, 10,000:1 in five stages, and 36,000:1 in six stages
* Motor Sizes: IEC Frames from 63 to 280; NEMA Frames from 56 to 405
|
|
Within Rotalink the widest range of permanent magnet and hybrid stepping motors are supported by a team with extensive experience in both design and manufacture.
Motors can be supplied with special shafts including lead screws and interfaced with dedicated gearboxes and a standard dual line encoder. Connectors and pulleys can be fitted to your specification. The majority of our wide range of product is available from stock; special windings will be on a short lead time.
|
|
DESCRIPTION:
Leading applications: general purpose, medium and fractional power drives. Dry friction and fully sealed enclosure allow reliable, service free and safe installations.
Design: housings and covers of aluminium die cast for sizes 63 and 71, of cast iron for sizes 80 and 90. Variators with output flanges, according to standard IEC sizes, to plug in the various helical and worm/wheel units.
|
|
Tensions: 12 or 24V mini – 100/110 – 200/220 – 230/250 – V maximum. Series
A.C./D.C. or shunt D.C. special Tensions on request.
Engines Classifies “ F” – on closed rolls of the dice, lubricated with life. All to 2
direction of rotation.
Reducers tight and lubricated with life. Entirely on rolls of the dice, screw
without treated steel end and polished. Coil in composite or bronze on request.
Assembly multiposition.
Flexible connections Wire PVC 30cm or box on terminals on request.
Details of the Performances Engine Page 44.
|
|
We propose one of the broadest ranges of
engines and motor reducers of the world, with
really possible million combinations.
Since l’ study jusqu’ with the design, us
let us lay out d’ a single production capacity:
d’ only one to several thousands of parts. Us
let us work constantly on the development of
new products to continue d’ to offer this choice
and this flexibility with our customers.
|
|
INOX SHAFT
MOTOR: Asynchronous three-phase motor with 2 poles, totally enclosed. Thermal safety feature.
Class H winding in accordance with VDE 0530. IP 66 standard protection(IP67 on request) in accordance with DIN 40050.
GEAR UNIT: With die-cast aluminium casing. Wheelbase 32 mm. Wheel rim in special bronze 110 HB hardness. Worm gear in
hardened steel with grinding thread rotating on ball and roller bearings, output shaft in stainless steel on request. Lubrication with special long-lasting oil. Sealing rings
made in special white rubber for high temperatures. Rated torque from 2,9 to 18 Nm. Version B3 or B5. B5/S left version - B5/D right version.
|
|
STAINLESS STEEL SHAFT
MOTOR: Asynchronous three-phase motor with 2 poles, totally enclosed. Thermal safety feature.
Class H winding in accordance with VDE 0530. IP 66 standard protection(IP67 on request) in accordance with DIN 40050.
GEAR UNIT: With die-cast aluminium casing. Wheelbase 26mm. Wheel rim in special bronze 110 HB hardness. Worm gear in
hardened steel with grinding thread rotating on ball and roller bearings, output shaft in stainless steel on request. Lubrication with special long-lasting oil. Sealing rings
made in special white rubber for high temperatures. Rated torque from 0,8 to 5 Nm. Version B3 or B5. B5/S left version - B5/D right version.
|
|
INOX SHAFT
MOTOR: Asynchronous three-phase motor with 2 poles (4 poles on request), totally enclosed. Thermal safety feature.
Class H winding in accordance with VDE 0530.
IP 66 standard protection(IP67 on request) in accordance with DIN 40050.
GEAR UNIT: With casing in die-cast aluminium. Case-hardened and hardened gear pairs with shafts rotating on roller bearings, output shaft in stainless steel
on request. Lubrication with long-lasting oil (no toxic). Sealing rings made in special white rubber for high temperatures.
15 gear ratios (i) available, from 7.4 to 441.9. Rated torque from 0,8 to 5 Nm. Version B3 or B5.
|
|
INOX SHAFT
MOTOR: Asynchronous three-phase motor with 2 poles (4 poles on request), totally enclosed. Thermal safety feature.
Class H winding in accordance with VDE 0530.
IP 66 standard protection(IP67 on request) in accordance with DIN 40050.
GEAR UNIT: With casing in die-cast aluminium. Case-hardened and hardened gear pairs with shafts rotating on roller bearings, output shaft in stainless steel on request. Lubrication with long-lasting oil (no toxic). Sealing rings made in special white rubber for high temperatures.
15 gear ratios (i) available, from 7.4 to 441.9. Rated torque from 2,8 to 20 Nm. Version B3 or B5.
|
|
Planetary motor reducers dia. 38 with 110mm
Tension 12 or 24VCC
Acceptable couple 2,9 to 200 Nm
Speeds from 2 to 700 rpm - 1 with trains
Strong points:
- Robust Construction
- Capacity of high overload
- Reduced noise Level
- Optimal Lifespan
- Quality ratio/prices Excels
|
|
D/ES
Asynchronous motors for 3-phase operation and 1-phase operation with capacitor up to 50W rated output. Gear versions with planetary and worm gears. With mounting option for parking brakes (incremental encoder available upon request).
|
|
Applications
Brush drive motors
Traction drive motors
Floor care and other vehicle drives
Rugged, Dependable, Long Life Motors
Integral Gearbox made of Aluminum Alloy
115 and 230VAC Rectified, 36 and 24VDC
165 to 340 rpm Shaft Output
Full-Keyed Shaft from Gearbox
Face Mount in Any Direction
Operates in Both Directions
115V and 230V UL and CSA Listed
All Ball Bearing Construction
Brush Life at 3,000 hrs Min.
Ambient Temp 40 degrees C
Insulation Class F
UL Probe Protection Frames
7:1 Optional
|
|
AC ASTRO synchronous geared motor with worm gear
ASM SSG
|
|
|
|
|
|
Three-phase geared motors
Popular geared motors with constant speed and high functionality; power range 0.06 to 45 kW; output torques of up to 9,000 Nm
Detailed information
Geared motors - inverter variable speed drives
Popular industrial geared motors combined with electrical adjustment via 8200 motec frequency inverter; power range 0.25 to 7.5 kW; the distributed drive solution
Detailed information
Geared motors - electronic starter
Popular industrial geared motors combined with the electronic starter starttec; power range 0.25 to 4.0 kW; the distributed drive solution
Detailed information
Geared servo motors
Highly dynamic geared servo motors with synchronous and asynchronous servo motors; max. torque: 7 - 9,000 Nm; low backlash
Detailed information
Gearboxes - with shaft or flange input
Speed reduction gearboxes with free shaft or IEC flange at the input side suitable for motors to IEC 72; output torques of up to 9,000 Nm; finely stepped output speeds
Detailed information
Geared motors - mechanical belt adjustment
Popular industrial geared motors combined with mechanical adjustment via Simplabelt compact units; power range 0.25 to 45.0 kW; adjustment range 1:6
Detailed information
Geared motors - mechanical adjustment Disco
Popular industrial geared motors combined with mechanical adjustment via Disco variable speed drive; power range 0.25 to 7.5 kW; adjustment range 1:6
Detailed information
Disco variable speed drives
Mechanical adjustment with Disco variable speed drive; power range 0.25 to 7.5 kW; adjustment range 1:6
Detailed information
Standard three-phase AC motors
Standard three-phase AC motors; 0.25 to 22.0 kW 3 x 230/400 V; enclosure IP 54; mountings B3, B5 or B14; these motors are optimised for operation with a frequency inverter
|
|
Type
0IK1A-AW2J
Series
Induction motors (1-3 W)
Technical data
Type
0IK1A-AW2J
Frame size [mm]
42
Output power [W]
1
Shaft type
round
Gear ratios [1:x]
no gear
Rated speed for 50 Hz/60Hz [r/min]
1000/1200
Max. permissible torque for 50 Hz/60 Hz [Nm]
0.0095/0.008
Protection class
IP20
Power supply
single-phase 100 VAC
RoHS-compliant
yes
|
|
|
|
